Thank you, very helpful, my 09 ss cruse and third brake light isn't w, bulbs are good which if one is out the cruse doesn't work, disconnected the battery for a cruse control reset, no go, haven't changed the brake switch under the pedal yet and the speed sensor is connected to the cruse, all fuses are good plus the relay switch is good, gonna check for connection on the speed sensor and or replace, ALL these things are linked to one another and one of them doesn't work none of them do. Thanks again, stay safe and God bless.
@@marvelman862010 I have to get my car inspected and got pulled over Friday night for the third brake light thankfully no ticket just a warning and worked on searching it for about four hrs yesterday before it got dark and the a friend that has a car like mine and knows more about them said to check the speed sensor connection and that's my next check after work before buying and replacing parts. On the Cobalt forum someone said that if your car is on cruise and you push in the clutch pedal too long it'll turn the cruise off and sometimes disconnecting the battery for about twenty minutes will reset it but no go and also while you're driving pull up on the brake pedal with your left foot and if the cruise starts working the brake switch under it needs to be adjusted which I also need to try so hopefully any people finding your channel maybe it will help them or you as well. Why these things are connected on one circuit is beyond me.
@@rockyjefferson5598 All i did is disconnect negative side of battery. Disconnect harness to PCM. Give 5 to 10 min reconnect harness and negative battery. This did the trick. Start shifting normal.
"Do you see that sensor right there as I shake the camera, don't point and hold the camera on it for 1.5 seconds?" Well at least I know what side of the engine to look. Thank you for your effort
Thanks for this video, I found out my wires were broken. This video made finding it easy!
You’re very welcome
Yay! Thank you for this simple and direct video.
You’re very welcome
Thank you, very helpful, my 09 ss cruse and third brake light isn't w, bulbs are good which if one is out the cruse doesn't work, disconnected the battery for a cruse control reset, no go, haven't changed the brake switch under the pedal yet and the speed sensor is connected to the cruse, all fuses are good plus the relay switch is good, gonna check for connection on the speed sensor and or replace, ALL these things are linked to one another and one of them doesn't work none of them do. Thanks again, stay safe and God bless.
You’re very welcome
@@marvelman862010
I have to get my car inspected and got pulled over Friday night for the third brake light thankfully no ticket just a warning and worked on searching it for about four hrs yesterday before it got dark and the a friend that has a car like mine and knows more about them said to check the speed sensor connection and that's my next check after work before buying and replacing parts. On the Cobalt forum someone said that if your car is on cruise and you push in the clutch pedal too long it'll turn the cruise off and sometimes disconnecting the battery for about twenty minutes will reset it but no go and also while you're driving pull up on the brake pedal with your left foot and if the cruise starts working the brake switch under it needs to be adjusted which I also need to try so hopefully any people finding your channel maybe it will help them or you as well. Why these things are connected on one circuit is beyond me.
Gracias por el video me ayudó mucho
De nada
That is the right side of the car. The car is facing you when your in front of it looking at it. Your right is it’s left.
Haha my bad I’m sorry
You are the man.
Thank you
Thanks man!! Very helpful 🤙🏽🤙🏽
You’re welcome
Muchas gracias
Thank you !!!
You’re welcome 😎
great video!
Thank you 😊
That's the right side. Always refer to the side of the vehicle as if you're sitting in the drivers seat.
Thank you I’ll remember that next time I post a video
Got a 2006 chevy cobalt. Speedometer is stuck at zero. Doesn't shift gears. Do you think it could be a faulty speed sensor ?
Was that the issue?
I am having the same problem. How do I fix it?
@@rockyjefferson5598 All i did is disconnect negative side of battery. Disconnect harness to PCM. Give 5 to 10 min reconnect harness and negative battery. This did the trick. Start shifting normal.
Thanks I'll try this next
@@rockyjefferson5598 ground your tcm to the shocks. Use 12gauge wire. Thank me later.
So this car has a input sensor and a output sensor do you know where the one is besides the one in your video?
No it has been a while and I’m sorry :( I don’t have the car anymore
What size tool is needed to remove speed sensor?
That one I did forget I’m sorry
Where is the input speed sensor. We know it’s on top of the transmission but don’t know where. I also have a 2005 Chevy cobalt.
Man I wish I had the car now to do more videos :( I am sorry
"Do you see that sensor right there as I shake the camera, don't point and hold the camera on it for 1.5 seconds?" Well at least I know what side of the engine to look. Thank you for your effort
You know UA-cam has a pause button, right?
Ò⁹