.22 airgun hollow point slug swaging

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 102

  • @greenenko
    @greenenko Рік тому +4

    Nice press! Auto ejector speeds up the process a lot

  • @jefffromjersey52
    @jefffromjersey52 Рік тому +1

    Thank you for sharing the process.. I can think of a number of Improvements you can make however .. if you want to hear it

  • @liukang81
    @liukang81 8 місяців тому +1

    Where could I get slug tool kit,please sir?

  • @tedshickell7315
    @tedshickell7315 Рік тому +1

    Need one of those to make my slugs for the .35 cal aea I got

    • @Premierslugs
      @Premierslugs  Рік тому

      They are excellent just buy the die and you can make whatever cal you want

    • @tedshickell7315
      @tedshickell7315 Рік тому

      @@Premierslugs where’s the best place to buy the die from

    • @Premierslugs
      @Premierslugs  Рік тому +1

      @@tedshickell7315 the only place is Dave Corbin , Google them ping them an email and they will sort you out

  • @ВладимирКоломин-л5ф
    @ВладимирКоломин-л5ф 10 місяців тому +1

    Круто! Подход вообще огонь

  • @dougkapounek9024
    @dougkapounek9024 Рік тому +1

    Hi, great video but where do you get or make the lead rods you are using? Thanks

    • @Premierslugs
      @Premierslugs  Рік тому +2

      Hello I bought it on a drum and cut it down to length suitable to fit in to a air tight pasta container , I buy from a company In Rotherham,South Yorkshire

  • @andrewnesbitt5342
    @andrewnesbitt5342 10 годин тому

    DIY press or Corbin? Also where did you get the lead wire in the UK? Looking at getting into swaging.

    • @Premierslugs
      @Premierslugs  9 годин тому

      @@andrewnesbitt5342 Hi this one is a corbi press and dies , I also have a presslug press , I buy my lead from a company called heaps in Rotherham

  • @mohammedalobeidi6080
    @mohammedalobeidi6080 5 місяців тому

    Welcome . How much does this machine cost and how do I get one like it? Please answer. Thank you

    • @Premierslugs
      @Premierslugs  5 місяців тому +1

      @@mohammedalobeidi6080 it is made by Corbin in the USA you would have to ask them for their current price

  • @johnevans382
    @johnevans382 9 місяців тому

    Hi bud just found your site if you don’t mind me asking where did you get your press and dies from I got .25 would like to have a go at making some many thanks john Anglesey north wales

    • @Premierslugs
      @Premierslugs  9 місяців тому

      Hi I bought it used from a guy in Telford , the press is a Corbin walnut hill and are still available on the Corbin website in the Us , they are quite expensive though dies are Approx £550

  • @dataykhan
    @dataykhan Рік тому +1

    Great video could you please help me out to get this die setup only without press.
    Thanks

    • @Premierslugs
      @Premierslugs  Рік тому

      I honestly don’t think that would be possible

    • @AmazingChinaToday
      @AmazingChinaToday Рік тому +1

      @@Premierslugs There are some people out there who tap the die with a hammer to form the pellet. If you google for images you'll see them. Manufacturer name was "Star" something, but I couldn't find it for sale. Allegedly the "Star" die is about 200 dollars, so it's much more affordable.

  • @fha9507
    @fha9507 11 місяців тому

    I just came across this been swaging for quit a few years. Did Richard make these dies for you? I have the Walnut Hill as well. I would love to have some dies made up in 25, 35, and 457.

    • @Premierslugs
      @Premierslugs  4 місяці тому

      The dies are Dave Corbin s press dies but I am using an adapter

    • @RuffOverlord1
      @RuffOverlord1 Місяць тому

      ​@Premierslugs where did you get the adapter?

  • @andynguyen7185
    @andynguyen7185 4 місяці тому

    Where do you get those containers to store your lead wires or do you know what it called?

    • @Premierslugs
      @Premierslugs  4 місяці тому

      @@andynguyen7185 hi they at just air tight pasta jars from a local store

  • @redgum1340
    @redgum1340 10 місяців тому

    How do you make the long 5mm wire core. Look like it might be about a foot long

    • @Premierslugs
      @Premierslugs  10 місяців тому

      Hi I buy it on a roll and cut the that length just so it fits in my airtight box

  • @keithrowley5859
    @keithrowley5859 Рік тому

    Can you buy the dies to make fx type hybrid slugs. Looking great.

    • @Premierslugs
      @Premierslugs  Рік тому

      You can yes , but that’s a two part process,first the die makes a u shaped tube sides and bottom then the next die forms the tip of the slug

  • @Strike2Kill
    @Strike2Kill Рік тому

    Good morning, welcome, I want to buy a press like this one and the piece. Is it possible to have the dimensions and measurements if I want to make one like this? Thank you.

    • @Premierslugs
      @Premierslugs  Рік тому

      Hi I didn’t make the press , It’s from Richard Corbin and the dies from Dave Corbin

  • @jwhill45
    @jwhill45 Рік тому

    I have the same Swage press, It's a walnut hill from r c e.. Where did you get the die?

    • @Premierslugs
      @Premierslugs  Рік тому

      The die is a Dave Corbin with an adapter to suite the presss

  • @wilsonnunespereira5618
    @wilsonnunespereira5618 8 місяців тому

    Boa tarde, Amigo!
    Quanto custa essa prensa e a forma para slug hollow point?

    • @wilsonnunespereira5618
      @wilsonnunespereira5618 8 місяців тому

      Você tem um número de WhatsApp para conversarmos melhor sobre a prensa?

  • @johnconnor6725
    @johnconnor6725 10 місяців тому +1

    Super great Video
    Thanks

  • @SalehMagrabi
    @SalehMagrabi Рік тому +1

    Thanks for sharing this valuable information with us.

  • @jeffreystroman2811
    @jeffreystroman2811 Рік тому +1

    Where have these been all my life, need one above all else, except food and water, sex depending if someone else is involved.

  • @ImranHossain-zc6km
    @ImranHossain-zc6km Рік тому

    How could I buy .177 pallet mold like this .....please inform me

  • @DPCSchannel
    @DPCSchannel Рік тому

    Looks fun. Where do you get the lead wire from in the uk

    • @Premierslugs
      @Premierslugs  Рік тому

      Hello I buy it from Heaps in Rotherham

  • @ReyMendoza-e3r
    @ReyMendoza-e3r 3 дні тому

    Compa qe cuesta esa prensa

  • @rickydaniel1573
    @rickydaniel1573 Рік тому

    Any suggestions on where I can het the equipment please?

    • @Premierslugs
      @Premierslugs  Рік тому

      Hi All can be bought from Dave Corbin or Richard Corbin , they are two brothers but have separate business

    • @hectorgonzalez7416
      @hectorgonzalez7416 Рік тому +1

      Is there a website to get this press im new to this

    • @Premierslugs
      @Premierslugs  Рік тому +1

      @@hectorgonzalez7416 hi you would just have to Google them

  • @claudioalegre8915
    @claudioalegre8915 Рік тому +1

    Hola
    Tienen precisión a 100 yardas ?

    • @Premierslugs
      @Premierslugs  Рік тому +1

      They are doing just over one hole at 50 yard and sub moa at 100

  • @franceusordas1246
    @franceusordas1246 8 місяців тому

    Awesome machine..can i buy this machine from you,im from Philippines.

    • @Premierslugs
      @Premierslugs  8 місяців тому

      Hi they are made and sold by Corbin manufacturing

  • @heric.4428
    @heric.4428 Місяць тому

    Where can i order one mate?

    • @Premierslugs
      @Premierslugs  Місяць тому

      @@heric.4428 corbin manufacturering

  • @Thehunterofficial.
    @Thehunterofficial. 11 місяців тому

    How to order the tool

  • @honda16001
    @honda16001 Рік тому +1

    How much was the setup? Thanks

    • @Premierslugs
      @Premierslugs  Рік тому +1

      Hi I actually got mine used in the UK for £720 but I have bought dies lead lube ect on top of that , new it would be around £2000

    • @WaschyNumber1
      @WaschyNumber1 Рік тому

      😳 2000£ 😞

  • @gessemarceneiro3170
    @gessemarceneiro3170 Рік тому

    Quero comprar uma máquina dessa vc vende?

  • @PeakyBlinder
    @PeakyBlinder Рік тому

    Where did you get that lead wire from

    • @Premierslugs
      @Premierslugs  Рік тому +1

      Heaps in Rotherham,South Yorkshire

    • @PeakyBlinder
      @PeakyBlinder Рік тому

      @@Premierslugs cheers,
      I cast mine,
      But it's always easier to cut them.

    • @PeakyBlinder
      @PeakyBlinder Рік тому

      @@Premierslugs I'm in London Mick,
      How much do they cost you.

    • @Premierslugs
      @Premierslugs  Рік тому +1

      I guess it would depend on how much you buy , give them a shout ,being as heavy as it is delivery ignite e expensive ?

  • @snipermbleset
    @snipermbleset Рік тому

    what is the price if I want to buy the press tool?

  • @Thehunterofficial.
    @Thehunterofficial. 11 місяців тому

    interesting can i get that tool

  • @EduardoMiranda-wi5kc
    @EduardoMiranda-wi5kc Рік тому

    Qual valor de uma presa dessa e envia para brasil

  • @widihamdani5530
    @widihamdani5530 Рік тому +2

    Mantap👍 mimis slug

  • @mikesmith8313
    @mikesmith8313 Рік тому

    Need some for my fac sumatra .22

  • @eduardomagdaleno4747
    @eduardomagdaleno4747 Рік тому

    Como le hago para conseguir una así pero en 5.5

  • @naveedsafdar6349
    @naveedsafdar6349 Рік тому

    Dollar price

  • @PeakyBlinder
    @PeakyBlinder Рік тому

    what swager is that please

    • @Premierslugs
      @Premierslugs  Рік тому +1

      Hi It’s a Richard Corbin chestnut hill , basically the same as the mega mite from Dave Corbin

    • @PeakyBlinder
      @PeakyBlinder Рік тому

      @@Premierslugs ah ok thanks for that, im using a gmi swager, saves a fortune on slugs, where do you get your lead wire, i cast my blanks as im a roofer in london i get a lot of lead but the wire looks quite handy.

    • @Premierslugs
      @Premierslugs  Рік тому

      @@PeakyBlinder I buy it from a place call heaps In Rotherham they will make it pure lead or add tin or whatever else you want and also swage it to the diameter you want too

    • @mikesmith8313
      @mikesmith8313 Рік тому

      @@Premierslugs I could detect your sheffield accent,

    • @Premierslugs
      @Premierslugs  Рік тому

      @@mikesmith8313 No not from Sheffield , live in Barnsley,but from Hemsworth lol

  • @Yokisupandi
    @Yokisupandi Рік тому

    Price ??

  • @halaybeh
    @halaybeh Рік тому

    How much it is?

  • @thomascarboni7727
    @thomascarboni7727 Рік тому

    Bellissima ,io ho cercato tanto lo stampo per fare pellet 5,5 ma l unica cosa che ho trovato arriva dalla Cina e faceva 5 pellet alla volta ,il problema è il costo molto alto ,900 euro più 300 euro per spedirlo in Italia,ho pensato anche a farmelo da solo ,ma troppo difficile .comunque la tua è una bellissima macchina complimenti 👍 saluti dall italia🇮🇹🇺🇲

  • @robertocosta5727
    @robertocosta5727 Рік тому

    Good evening, how much would you make a complete set of this for the caliber 6.35 mm or .25 ??, I am interested in buying

    • @Premierslugs
      @Premierslugs  Рік тому +2

      Hi I don’t make them sorry , contact Dave Corbin in America

    • @robertocosta5727
      @robertocosta5727 Рік тому +2

      @@Premierslugs Thanks for answering, but how do I get in touch with this person or company?

    • @Premierslugs
      @Premierslugs  Рік тому +2

      @@robertocosta5727 www.corbins.com/airgun.htm

    • @robertocosta5727
      @robertocosta5727 Рік тому

      Thanks

  • @leposkendari3191
    @leposkendari3191 Рік тому

    Bagrmana sy bisa memeblinya ?
    Kirim indonesia cal 177

  • @alexbrunes6741
    @alexbrunes6741 11 місяців тому

    Hello, please give me a helping hand!!!!!!give me the dimensions of your abs, I want to copy...no one wants to help, they only think about money.....

    • @Premierslugs
      @Premierslugs  11 місяців тому

      Hello I didn’t make the press

  • @mendaharahunter8311
    @mendaharahunter8311 9 місяців тому

    Please 🙏🙏

  • @syn010
    @syn010 11 місяців тому

    Без молотка не кашерно😂

    • @Premierslugs
      @Premierslugs  11 місяців тому

      I have no idea what that says sorry

  • @jlyle51
    @jlyle51 Рік тому +1

    Speaking louder would help. Please.

  • @keith4866
    @keith4866 Рік тому

    Do you make the dies if so please email me.