Це відео не доступне.
Перепрошуємо.
DIY Super Thin and long Circular saw Guide Track from Aluminum 2.7 meter - Homemade track saw
Вставка
- Опубліковано 13 кві 2022
- #plywoodworking #DIYTrackSaw #BestTrackSawGuide
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking group and Page
/ plywoodworkingtipstrick
/ 479435482886643
/ plywoodworking
Today I'll show you how to make an aluminum jig, this is circular saw track guide, very thin only 2mm and precise. easy for build and cheaper than buy original track saw. low consume storage coz can attack and detach.
Prob one of the best that i've seen on youtube. The low clearance for the motor, the maximum depth of cut using sheet aluminum, the ability to extend it, the accuracy via the fence and slot, the ability to stay in one place without using clamps, minimal room it takes to store it, zero-clearance cutting line, looks to be minimal friction resistance when sliding saw mount, and I'm sure a couple other features that i didnt mention. I got one question - how much did all that cost, approximately? Thanks for sharing. Aloha
Thank you very much for your comment. I'm glad you like this video. I forget about the details but the estimation is $30-$40
You are a magician! thanks for your tips and tricks
Wow, thanks!
It's a great tool honestly I recommend it friends.
Nice job on the circular saw track Friend! Thank you for sharing the video with us!👍💖😎JP
Thank you very much!
@@plywoodworking Your very welcome Friend! Have a good week!😎
this is an exellent job man
Brilliant jig, dude! Fantastic work! 😃
This was a really fantastic idea!!!
Stay safe there with your family! 🖖😊
Thanks, will do!
cakep bang, festool style nih...
hehe bnr basicya niru dri itu
Very nice up grade and so smooth to run your saw along awesome job thanks for sharing love your channel
Thank you! Cheers!😊
Merci beaucoup pour la vidéo
Glad you like it thank you very much always support my channel !!
Fantastic bro 👏
Thank you so much 😀
Sorry did I miss where your suppliers are located for the materials you used? Great project!
thank you very much!! i buy on local store
Hi, thank you for the video. What kind of material is that black strip? Where you can find? Have you got a link to buy? Thank you
❤❤❤ z best
thank you very much glad you like this
Sekalian req om, bikinin tutor nya dunks supaya dws 7470 nya bisa potong plywood full🤭🙏
Klo ini gk mkn kykya coz wsya sempit gk muat, itu knpa butuh track saw dlu bru ke ts😁
Mantaf suhu 🙏🏿🙏🏿
Thank you very much
Could you please put the link for t-slot channel and flat bar as well as aluminium sheet for where you bought it from.
Thanks
thank you for visit my channel, i buy on local shop maybe you buy online like banggod, ali express or amazone
Thanks
Where do you find the metal track? Great Video!
thank you, this material call Mini T track
good good
Thank you! Cheers!😊
So, where do you find the mini T track and the T bar? how thick is the aluminum sheet, and how wide are the strips?
I buy on the marketplace for a mini t track including T bar. I am using 2mm aluminum grade A
Good sae
Best
I don't see how the jig keeps from sliding when you pass the handheld circular saw... those PVC straps must cause the friction
What's the green material that you use for the saw base?
this material call HMR (high moisture resistant)
Mantabb om, kl di jual sy minat tuh😁
Maksih om, jgn ini dibelain buat coz br dewaltya bs dipake yg CS AEG udh lelah😁
@@plywoodworking modal brp om buat bikin yg persis ?
Modalya lupa mkn 2 pasang inj kisaran 650-750 modalya aj tp dpt track 2.7m klo beli sebiji aj 3jt panjang 145cm
@@plywoodworking mantap.. makasih infonya om
Siapp om, btw itu pake aluminium brp mm om?
whats the aluminium sheet cutting sizes?
Original size aluminium sheer 100cm x 200cm. I use 145cm x 16.5 cm 2 pieces.
@@plywoodworking what thickness would you recommend? thank you very much!
I recommended 2mm or 3mm
bang, pvc strip hitam nya itu ukuran berapa?
Lebar 44mm
Plat aluminium nya pake ketebalan berapa mm ya?
2.2mm grade A
@@plywoodworking 5052 ya..
@@plywoodworking om mo nanya kalo di ganti pake pvc t=5mm kira" mlenting atao semacam bergelombang gitu ngk ya untuk jagka panjang nya?
Klo dri pipa pvc asal pressya bnr gk akan melengkung, cm rentan pecah tp bs dicoba blm pernah cbain pke pipa pvc coz klo yg tebel mahal, jatuhya mendekati aluminium
@@plywoodworking ok, terima kasih
iya dehhhh yg udah upgrade jd flexvolt...!!!!! wkwkwkwkwkwk
pembaruan mas, gmna statusya udh pembaruan jga ap blm 😁
@@plywoodworking hahaha udah alhamdulilah. kena racun dirimu wkwkwkwkwk
Dijual ga mas?
maap gk dijual mas, buat dipake sndiri soalya
@@plywoodworking pelit lu 🤣
@@be-veo wkwkwkwkwkwkwkwk
why the use of that st00pid box....i adont need a box to keep it straight ....finally aluminum though...all these other narrow minded diyers and everything out of wood , average st00GE
thank you very much!!!