Hi, I just wanted to thank you for your great tutorial. I have recently changed my thermal pads as you have shown and it worked wonders for me. Now I can set my OC to the maximum capabilities of the card and it works flawlessly without crashing.
@@techgeek2994 i havent tried that on strix, however i did that on sapphire pulse, and it is of great help. When I open my strix next time, I will give it a look. Thanks for the info!
The screws holding the metal plate are faulty. Since it cannot print, the temperature increases. It was installed incorrectly. Asus service replaces the screws.
Great tutorial! Didnt work for me actually. I did however fix it, I adjusted the Watt from 220 to 177 maximum, on linux i used a program called CoreCtrl for this. Dont know what program for windows, but im confident it exist something simular as CoreCtrl for windows. =)
hi how much Gelid Solutions GP-Ultimate Thermal pad 120x20x1.5mm are you using in total? or are you just using 1 I have the same gpu and i am getting memory temps around 104 c when I am mining should I be concerned? my vram and gpu temps are oke 60 C while mining only my memory is realy high
Hi! I would suggest you buy 2. Because you also have to change the one on the heatsink (@4:40 the gray thermal strap on the left), which I forgot to say in the video. 2 pads should be enough, so you don't have to cut pads for each chip individually as I did, you can just use straps of pads. If you do it correctly and change the paste as well, I think you will get a drop of 10 deg on GPU, and 20 degs on mem. I think it is worth the trouble. Is your memory Micron or Samsung?
That would be awesome! Let me know how it goes, however I am not convinced it would be much better, since the radiator is small and cannot dissipate thst much heat, but it would definetly be interesting to see the results!
sorry to bother you again but I am about to buy the thermals pads and I looked somethings up and it says that you need to use 2 mm for the backplate so do I need to have: 2 x Gelid Solutions GP-Ultimate Thermal pad 120x20x1.5mm 1 x Gelid Solutions GP-Ultimate Thermal pad 120x20x2.0mm is this what i need or can i drop 1 of the 2 1,5 mm?
Hi, the 1.5mm is for the memory chips on the gpu side and you need 2 straps. For the backplate i used 3mm, however i think 2 mm is even better and you are going to need 1 strap. Make sure to clean all the oil left from the old pads. Good luck!
@@BMasterBM1 Hello, today I opened the gpu, changed thermal paste and thermal pads (I bought 1.5mm memory, 2mm mosfet and 3mm backplate gelid gp extreme - artic mx-5). As soon as I change and turn on the gpu and temperature it stays at 46 gpu and memory 84 but with the fan at 100%. I think the problem is the 2mm thermal pad that I installed on the mosfet. any suggestion? my intention is to buy a 1.5mm thermal pad and change it to the 2mm mosfet but it makes me sad to throw it away since it is new.
@@BMasterBM1 under load, 54.xx mh at 1300/750/750/880/1330 (hive os settings). Any idea?? The same gpu with samsung memory w/same oc settings got 46gpu/78mem 33% fan (22 celcius ambient temp).
@@ranam9253 it might be the problem with a pad, 0.5 mm might not seem much, but it can cause this. These temps are still not critical, ddr5 is fine up to 100 deg
Hi friend, I have rx 5700 xt rog strix, I change thermalpads for Memory 1.5mm, Backplate 3mm but it's really hot 90° - 94°, any suggestion? backplate is better 2mm?
@@BMasterBM1 Exactly brother I'm mining on windows, Core voltaje +950, PL +0, cclock 1350, mclock 1840, fans 97% with fan on the backplate noctua. I currently have it in 92°
you need to add thermal pad in between memory radiator and heatsink there is no contact there to transfer heat from memory out of the card and also put pads on memory . i got my card from 90c on memmory down to 70c
Bruh, asus strix are the best gpus out there and they really cheap out on the most cheap part and completely destroy the potential of their coolers. That's so dumb xD
Hi! Gonna do this fix in a short while as I found my VRM mosfets pad torn to pieces so I was wondering if I’d be good to go with 2 strips of 120x20mm, one for those specific mosfets and one for the 8 memory chips + the memory mosfets. I’ll change the pads squished between the backplate and the PCB later on cuz I’m currently tight on budget.
Hi! Yes, you’ll need two pads for that. I had only one, so i changed the memory only pads and the backplate pads. Let me know of before/after temperatures and good luck!
here I am with the update. I only put a new Gelid pad on the VRM mosfets where the old one was torn apart. The GPU used to ramp up to 80° core / 110° junction real quick as soon as it hit full usage + it was hell of an airplane jet engine grade loud (that being undervolted to 1900mHz / 1020 mV. Now it goes nowhere above 73° core / 91° junction stock, being really quiet. Didn’t have time to test it undervolted.
Hi I have the same graphic card as you have and I have bugs it makes my pc restart and weird things happen to my screen and when I run a game it goes up to 100 degres and yet I changed the thermal paste do you think it is the Pads?
Instead of 1.5mm? Or at the back? It would probably work on the memory, since it has separate radiators, but I would still recommend to use the designated thickness. Even on the back I think you can, but don’t hold me accountable if it doesn’t :)
@@BMasterBM1 while mining, with 60% speed fans and 26 degrees temp, I have 56-57c on core, and 86-88c degrees on memory, vram 50c and hot spot 76-77c is it fine or the hot spot is a bit hot
Hello, thanks for your video. I would like to know if you can help me with this. I want to update the vbios with the UpdateBiosTool downloaded from the AMD website, but I get an error saying that I have to run it as admin, but it was always run as admin and still the same thing, it won't let me update.
@@BMasterBM1 pardon me, i thought, judging by yr accent, that you're a cz citizen. What thermal paste have u used and have you spread it out evenly on all the gpu? I get crazy high hotspot temp, even though edge is fine..
@@paveljelinek772 no problem. Yes i spread it evenly and I used arctic mx 5 i think. Check this video for some tips on how to lover the temps. ua-cam.com/video/qCa5aVq-mkk/v-deo.html
It's still very hot, are there any other solutions? I own a few RX5700XTs but the Asus have the highest temperature. (XFX thic 3 is about 20 to 30 degrees cooler on memory temp.)
@@BMasterBM1 bought them new last year. 2x Rog strix rx5700xt. I also have a gigabyte with high memory temperature. The XFX and sapphire seems to be the best.
@@mmetzameland Yes, as I said many times: Asus and Gigabyte are the worst. However, it is gddr5, so high mem temps are somewhat normal, around 80 deg should be fine. Which thermal pads did you use?
Hi, I just wanted to thank you for your great tutorial. I have recently changed my thermal pads as you have shown and it worked wonders for me. Now I can set my OC to the maximum capabilities of the card and it works flawlessly without crashing.
Hi, you are welcome!
i got mine to 70c on memory he didnt add thermal pad in the middle in the between memory radiator and heatsink.
@@techgeek2994 i havent tried that on strix, however i did that on sapphire pulse, and it is of great help. When I open my strix next time, I will give it a look. Thanks for the info!
@@BMasterBM1 yes there is a gap where you need to add 1.5mm and 2mm on radiator pipes side . i did it and its great now
The screws holding the metal plate are faulty. Since it cannot print, the temperature increases. It was installed incorrectly. Asus service replaces the screws.
When did you got them replaced? Do they still do it in 2024?
Great tutorial! Didnt work for me actually. I did however fix it, I adjusted the Watt from 220 to 177 maximum, on linux i used a program called CoreCtrl for this. Dont know what program for windows, but im confident it exist something simular as CoreCtrl for windows. =)
hi how much Gelid Solutions GP-Ultimate Thermal pad 120x20x1.5mm are you using in total? or are you just using 1
I have the same gpu and i am getting memory temps around 104 c when I am mining should I be concerned?
my vram and gpu temps are oke 60 C while mining only my memory is realy high
Hi! I would suggest you buy 2. Because you also have to change the one on the heatsink (@4:40 the gray thermal strap on the left), which I forgot to say in the video. 2 pads should be enough, so you don't have to cut pads for each chip individually as I did, you can just use straps of pads. If you do it correctly and change the paste as well, I think you will get a drop of 10 deg on GPU, and 20 degs on mem. I think it is worth the trouble. Is your memory Micron or Samsung?
Thanks man👍
thank you will try this
I will try copper termaplads for the same card.
That would be awesome! Let me know how it goes, however I am not convinced it would be much better, since the radiator is small and cannot dissipate thst much heat, but it would definetly be interesting to see the results!
sorry to bother you again but I am about to buy the thermals pads and I looked somethings up and it says that you need to use 2 mm for the backplate so do I need to have:
2 x Gelid Solutions GP-Ultimate Thermal pad 120x20x1.5mm
1 x Gelid Solutions GP-Ultimate Thermal pad 120x20x2.0mm
is this what i need or can i drop 1 of the 2 1,5 mm?
Hi, the 1.5mm is for the memory chips on the gpu side and you need 2 straps. For the backplate i used 3mm, however i think 2 mm is even better and you are going to need 1 strap. Make sure to clean all the oil left from the old pads. Good luck!
👍👍
Hello, thanks for the video, this 5700xt have micron or samsung memory?
Hi, you are welcome! It has micron memory!
@@BMasterBM1 Hello, today I opened the gpu, changed thermal paste and thermal pads (I bought 1.5mm memory, 2mm mosfet and 3mm backplate gelid gp extreme - artic mx-5). As soon as I change and turn on the gpu and temperature it stays at 46 gpu and memory 84 but with the fan at 100%. I think the problem is the 2mm thermal pad that I installed on the mosfet. any suggestion? my intention is to buy a 1.5mm thermal pad and change it to the 2mm mosfet but it makes me sad to throw it away since it is new.
@@ranam9253 are those temepratures under load or in idle state?
@@BMasterBM1 under load, 54.xx mh at 1300/750/750/880/1330 (hive os settings). Any idea?? The same gpu with samsung memory w/same oc settings got 46gpu/78mem 33% fan (22 celcius ambient temp).
@@ranam9253 it might be the problem with a pad, 0.5 mm might not seem much, but it can cause this. These temps are still not critical, ddr5 is fine up to 100 deg
Hi friend, I have rx 5700 xt rog strix, I change thermalpads for Memory 1.5mm, Backplate 3mm but it's really hot 90° - 94°, any suggestion? backplate is better 2mm?
Hi. The design of the card is not that good. So it will always be hot. I don’t know your setup, but 90-95 deg is acceptable.
@@BMasterBM1 Exactly brother I'm mining on windows, Core voltaje +950, PL +0, cclock 1350, mclock 1840, fans 97% with fan on the backplate noctua. I currently have it in 92°
@@danielhortadelgado7916 voltage is too high, you can go down to 750mV
you need to add thermal pad in between memory radiator and heatsink there is no contact there to transfer heat from memory out of the card and also put pads on memory . i got my card from 90c on memmory down to 70c
@@techgeek2994 how exactly to do that?
i have asus rog strix rx 480 8gb nd its killing me, its always 80-85, will your method work on mine too ?
Yeah, it is standard re-pasting and replacing thermal pads. It will help.
Bruh, asus strix are the best gpus out there and they really cheap out on the most cheap part and completely destroy the potential of their coolers. That's so dumb xD
@@infinitestars394 Totally agree. They ruined 300$ card to save 0.5$
Hi!
Gonna do this fix in a short while as I found my VRM mosfets pad torn to pieces so I was wondering if I’d be good to go with 2 strips of 120x20mm, one for those specific mosfets and one for the 8 memory chips + the memory mosfets. I’ll change the pads squished between the backplate and the PCB later on cuz I’m currently tight on budget.
Hi! Yes, you’ll need two pads for that. I had only one, so i changed the memory only pads and the backplate pads. Let me know of before/after temperatures and good luck!
@@BMasterBM1 Thanks! I’ll definitely stop by to give you an update after I had done the fix.
here I am with the update. I only put a new Gelid pad on the VRM mosfets where the old one was torn apart. The GPU used to ramp up to 80° core / 110° junction real quick as soon as it hit full usage + it was hell of an airplane jet engine grade loud (that being undervolted to 1900mHz / 1020 mV. Now it goes nowhere above 73° core / 91° junction stock, being really quiet. Didn’t have time to test it undervolted.
@@edimihai2944 nice, did you change the thermal paste? You should do that as well. I bet it would go down another 10 degrees.
@@BMasterBM1 yes, I applied some TG Kryonaut but I bet I applied it poorly as I was in a rush.
Juce sam kupio istu ovakvu , gde si kupio te termalne trake , ne mogu nigde da nadjem?
amazon.de
best samsung or micron for 5700xt?
Micron was better in the sense that it could be overclocked higher, and Samsung seems to be less power-hungry.
Hi I have the same graphic card as you have and I have bugs it makes my pc restart and weird things happen to my screen and when I run a game it goes up to 100 degres and yet I changed the thermal paste do you think it is the Pads?
Hi, i do not know about the bugs you have, but if the temp goes up it is thermal paste and pads most likely. It goes to 100 deg on core or memory?
@@BMasterBM1 I did not launch warzone and in gpu it marked 100 degrees
@@BMasterBM1 What is the reference of your thermal pads?
@@ez-services4518 gelid ultimate
@@BMasterBM1 okay and you put 1.5 mm?
Спасибо дружище! пойду разбирать свою "печку"! у меня 94 на памяти
can I put 2mm pads
Instead of 1.5mm? Or at the back? It would probably work on the memory, since it has separate radiators, but I would still recommend to use the designated thickness. Even on the back I think you can, but don’t hold me accountable if it doesn’t :)
@@BMasterBM1 while mining, with 60% speed fans and 26 degrees temp, I have 56-57c on core, and 86-88c degrees on memory, vram 50c and hot spot 76-77c is it fine or the hot spot is a bit hot
@@Tashyncho-Sapa-CEKTAHT i’d say it is within the normal range
t@@BMasterBM1 ok thank you, and this result is with 2mm thermal pads gelid and eth+toncoin dual mining
Hello, thanks for your video. I would like to know if you can help me with this. I want to update the vbios with the UpdateBiosTool downloaded from the AMD website, but I get an error saying that I have to run it as admin, but it was always run as admin and still the same thing, it won't let me update.
Hi. Which gpu do you have?
@@BMasterBM1 same gpu, asus rog strix rx5700xt
@@D0GGYD0GPC try following the method in this video How to Unbrick and Bios Mod AMD 5700 XT Rev 2.0
ua-cam.com/video/Wol6PUJ8R7w/v-deo.html
I break my crystall chip😢
@@Alimch1kc How?
@@BMasterBM1 I turned the screws
Jakou jsi dával pastu na čip a roztíral jsi jí? Řešim problém s vysokou hotspot temprčr, karta je z druhý ruky po komplet profylaxi
Can you repeat that, but in english? :)
@@BMasterBM1 pardon me, i thought, judging by yr accent, that you're a cz citizen. What thermal paste have u used and have you spread it out evenly on all the gpu? I get crazy high hotspot temp, even though edge is fine..
@@paveljelinek772 no problem. Yes i spread it evenly and I used arctic mx 5 i think. Check this video for some tips on how to lover the temps. ua-cam.com/video/qCa5aVq-mkk/v-deo.html
It's still very hot, are there any other solutions? I own a few RX5700XTs but the Asus have the highest temperature. (XFX thic 3 is about 20 to 30 degrees cooler on memory temp.)
Which version of Asus do you have? The one built before 2020 or after? What are you temps?
@@BMasterBM1 bought them new last year. 2x Rog strix rx5700xt. I also have a gigabyte with high memory temperature. The XFX and sapphire seems to be the best.
@@mmetzameland Yes, as I said many times: Asus and Gigabyte are the worst. However, it is gddr5, so high mem temps are somewhat normal, around 80 deg should be fine. Which thermal pads did you use?
@@BMasterBM1 I didn't modify them yet. But they are around 75-80 now.
@@mmetzameland that is still in ok range
use your big boy voice quit mumbling.. i had to boost all my volumes just to barely hear you
Sorry, I had bad mic at the time.