Just done mine all 4 wheels. Thanks for this video bud, managed to get one of those tools, yep spot on made the job easy. Some tips for anyone else having a go… I was using +18mm studs… on the fronts, my insertion tool only allowed a tiny bit of thread sticking out cos they are quite deep. Had to go hunting around the garage for another wheel nut with a shallower seat. I stripped at least 3 nuts and two studs so have plenty of spares to hand… on the rears, you don’t have to remove the hubs, my studs just about fit when the hole was about at the bottom, bit of a knack to it but got them in. Lost one stud inside took me a while to fish it out with a grabber thingy. have plenty spare ugga dugga batteries if you’re doing all 4 wheels cos this will smash the life out of it. Make sure you pull them right through but make sure you stop as soon as they are. On the rears this is visually on the front put your finger on the back of the stud and feel it. Check lengths are equal at the end. Happy motoring peeps.
I had to replace one stud on my S sedan here in the States. Problem is the stud I got was 42.5 mm so it’s short. It worked, but it’s shorter than the rest. I can’t find the right 50mm stud anywhere. My mechanic said you have to replace the entire hub with the studs, which is a more costly pain in the butt job. I’m tempted to go to a junk yard and knock a stud out and use one of those.
Do oem discs have a shield on the back so you can't do it as easily as this ? Ie they won't knock out the back because there's a dust shield thing in the way isn't there ??
LJB Media www.ebay.co.uk/itm/5x-Ford-Extended-Wheel-Stud-65mm-Long-M12x1-5-13mm-Spline-Fiesta-Focus-Mondeo/283534810708?fits=Car+Make%3AFord&hash=item4203fdde54:g:TYIAAOSwEcxdG1BM
Hayes-95 ye standards are 50mm and this is the tool www.ebay.co.uk/itm/Tool-Hub-9942-Car-Wheel-Stud-Installer-14mm-Diameter-Lug-Nut/323088406320?epid=2286300237&hash=item4b3991d730:g:7lUAAOSwpVpajEIX
Hey mate, how deep is the recess in your wheels. I’m fitting the same bbk as yours with an et42 wheel. My recess is 7mm wondering if these studs will work well with it
Just done mine all 4 wheels. Thanks for this video bud, managed to get one of those tools, yep spot on made the job easy. Some tips for anyone else having a go… I was using +18mm studs… on the fronts, my insertion tool only allowed a tiny bit of thread sticking out cos they are quite deep. Had to go hunting around the garage for another wheel nut with a shallower seat. I stripped at least 3 nuts and two studs so have plenty of spares to hand… on the rears, you don’t have to remove the hubs, my studs just about fit when the hole was about at the bottom, bit of a knack to it but got them in. Lost one stud inside took me a while to fish it out with a grabber thingy. have plenty spare ugga dugga batteries if you’re doing all 4 wheels cos this will smash the life out of it. Make sure you pull them right through but make sure you stop as soon as they are. On the rears this is visually on the front put your finger on the back of the stud and feel it. Check lengths are equal at the end. Happy motoring peeps.
Got the tool from toolhub
informative video mate, thanks. what torque do you set your wheel nuts to?
wish i could spend more on my car, but i have to buy loads of shaving blades. u lucky guy.
Nice little scoot bro. Appreciate the content. (Also hate cleaning up all the tools after working on it)
Thanks mate 👍 and ye cleaning up after I’d a nightmare haha 😂
I had to replace one stud on my S sedan here in the States. Problem is the stud I got was 42.5 mm so it’s short. It worked, but it’s shorter than the rest. I can’t find the right 50mm stud anywhere. My mechanic said you have to replace the entire hub with the studs, which is a more costly pain in the butt job. I’m tempted to go to a junk yard and knock a stud out and use one of those.
Hello dear , thank you for your video, please may i know the exact details of your wheel log nuts sizes and dimensions please, thank you again
Do oem discs have a shield on the back so you can't do it as easily as this ? Ie they won't knock out the back because there's a dust shield thing in the way isn't there ??
Where did you get the bolts from mate?
LJB Media www.ebay.co.uk/itm/5x-Ford-Extended-Wheel-Stud-65mm-Long-M12x1-5-13mm-Spline-Fiesta-Focus-Mondeo/283534810708?fits=Car+Make%3AFord&hash=item4203fdde54:g:TYIAAOSwEcxdG1BM
What size is the standard wheel stud length.
Have you had any problems with them since?
Nah mate sweet as a nut 👍 had my mechanic have a look at them last month when they did my tires and they said I did a good job.
What calipers are you using
are you sure standards are definitely 50mm as alls i can find on ebay are 40mm or 55mm ? also you got link to that tool and open bolts you used
Hayes-95 ye standards are 50mm and this is the tool www.ebay.co.uk/itm/Tool-Hub-9942-Car-Wheel-Stud-Installer-14mm-Diameter-Lug-Nut/323088406320?epid=2286300237&hash=item4b3991d730:g:7lUAAOSwpVpajEIX
Hey mate, how deep is the recess in your wheels. I’m fitting the same bbk as yours with an et42 wheel. My recess is 7mm wondering if these studs will work well with it
Mine are ET42 but with a 10mm spacer and you need the spacer or they will not fit pa.
Yeah going to be getting a spacer just wondering how much the studs stick out from the soacwr
You still got your evo?
Martin_Wilkes no mate sold it coz it was costing to much to keep it on the road.
What et are your wheels mate im fitting a set of et38 td 1.2s with brembos an not sure what spacers to get
Hi mate they are Oz sparkco wheels et42 with a 10mm spacer, I’ve been told with 1.2 you need a ET35 to get them over brembos.
What size wheels and tyres you running?
17x7 et42 with 10mm spacer
Where did you get the studs from
eBay pal
did you replace the rear studs?
Nah only put spacers on the front pal
I’ve just done the rears see below