Intro to Enameling - Sifting

Поділитися
Вставка
  • Опубліковано 8 січ 2025

КОМЕНТАРІ • 29

  • @janetsturis1414
    @janetsturis1414 11 місяців тому

    I've now watched the first 2 of your videos. You're an excellent teacher and a pleasure to learn from! Thank you so much for creating these great videos. 🙏

    • @10Gables
      @10Gables  11 місяців тому

      Aww - Thank you so much for your kind words. Have fun with your enameling journey!

  • @mackeronee5
    @mackeronee5 5 років тому +1

    Thank you so much Chris for these amazing videos!

    • @10Gables
      @10Gables  5 років тому

      Thank you so much for your feedback

  • @AngieGordon
    @AngieGordon 5 років тому +2

    So fascinating to watch you do this ♥️I love all of the tips along the way, thanks Christine!

    • @10Gables
      @10Gables  5 років тому

      Thanks you so much, Angie!!!

  • @mikealman9259
    @mikealman9259 4 роки тому +3

    Hi Chris, Thanks for sharing this, A lot of good tips packed in it.
    You said you usually use a kiln and not a torch, one thing I've found with torch firing is it's better to use a more focused or less bushy flame as it greatly reduces the size of the dark ring on the edge, unless, as you said, it's a look you want.
    If you do use a narrower flame be sure to circle around the whole piece so as to heat it evenly.

    • @10Gables
      @10Gables  4 роки тому

      Thanks so much, Mike! That's a great tip and I'll be sure to try it.

  • @rachelflamdesign
    @rachelflamdesign 5 років тому

    So cool to see how you do this! Thanks so much for taking the time to teach your techniques! Awesome vids on your entire channel!

  • @Treehousejewellery
    @Treehousejewellery 11 місяців тому

    Thanks for the useful videos 😊. Can you tell me the angle measurement of your trivets? I can’t seem to find these in the uk, and mine cause bad trivet marks. My son will make me some , thanks

  • @CatchtheFireWorshipFlags
    @CatchtheFireWorshipFlags 5 років тому +1

    Is it just me, but I love watching how-to videos... as if I need another craft project. ;) Maybe I'll stop after I try this. LOL

    • @10Gables
      @10Gables  5 років тому

      Thanks!!! I hope you enjoy it :D

  • @yones97
    @yones97 2 роки тому +1

    Thank you so much for creating these videos and sharing all this information. Can I ask what fume extractor you’re using or if you have any suggestions as to what to look for in an fume extractor? I’m just starting out so I’m making very small pieces and using a small Handy Flame torch with Mapp gas.

    • @10Gables
      @10Gables  2 роки тому

      Hello,
      Thank you! I use this fume extractor for soldering and torch enameling. I do have a very large space with vent fans as well, so am not sure how well this would work in a space such as a basement. amazon.com/gp/aw/d/B0007ZLH4Q Hope this helps and that you enjoy your enameling journey 🤗

    • @yones97
      @yones97 2 роки тому

      @@10Gables Thanks for your reply. I was afraid you were going to mention the ventilation. I’m still trying to figure that out. Thanks again for all your information!!

  • @cynthiahicks1909
    @cynthiahicks1909 Рік тому +1

    I haven't been able to find Penny Brite anywhere.

    • @10Gables
      @10Gables  Рік тому

      Try making a paste with citric acid and a bit of water instead 😊

  • @dlavanceful
    @dlavanceful 6 місяців тому +1

    Can you use any kind of torch?

    • @10Gables
      @10Gables  6 місяців тому +1

      @dlavanceful Thanks for your question here. It's a good one and the answer I have found in my experiments is 'it depends." 😊 Others may have differing results, but here is a rundown of what I've found works for me.
      I've successfully used a creme Brule style butane torch on smaller pieces less than an inch. I've also used acetylene-air for larger pieces less than 2 inches. The butane doesn't seem to discolor certain enamels as much as the acetylene does.
      I've also used a propane-oxygen little torch, but tip size makes a huge difference. With the largest standard tip, I've been able to enamel pieces up to an inch. Paige tips expand the capability of this torch to work more like the acetylene-air because of the flame size rendered. And propane is about the same discoloration as butane.
      Hope this helps!

  • @HypothermicIce
    @HypothermicIce 3 роки тому

    Hi! Is the cookie sheet you're using for protection made of aluminum? If it is, I would recommend you switch to one made of steel. Aluminum has a melting point of about 660 F, but the enameling process uses temperatures up to about 1500 F! If something were to go terribly wrong, your cookie sheet may not protect your work surface as good as you'd expect. Not to mention that the last thing you'd want in an emergency situation is more molten metal!

    • @10Gables
      @10Gables  3 роки тому

      Thanks for the reminder for people who may be watching this and thinking about work surfaces. As you may be aware, it is impossible to share every detail of every thing about a process in short videos :) Workshop safety is important to me and this is a steel cookie sheet. And the surface it is sitting on is also steel - a great workshop cart from the 50s we bought at a factory auction. In my new shop, I have a wooden cabinet underneath the kiln and work top. To help it stay nice and cool, we topped it with a 5mm thick piece of sheet steel. It works great!

  • @stephennagy3803
    @stephennagy3803 3 роки тому +1

    How do you prevent the counter enamel from melting and running when your torching the other side?

    • @10Gables
      @10Gables  3 роки тому

      Hello! It is a matter of not overdoing the heat. If your finding the counterenamel is developing holes because it is burning off,.try keeping your flame further away from the piece. Hope this helps!

  • @michellewhittington5874
    @michellewhittington5874 2 роки тому

    Do you make custom pieces?

    • @10Gables
      @10Gables  2 роки тому

      Hello Michelle! I do make custom work. You can find out more on my website at 10gables.com/customs

  • @aneesrabie965
    @aneesrabie965 3 роки тому +1

    Hi could you tell me please why I see bubbles in my enameled project after firing...thank you

    • @10Gables
      @10Gables  3 роки тому

      Hello! The answer is 'it depends.' There are so many things that can cause bubbles. If they are large spots that resemble pits, the chances are your glass is pulling away. If you're using a spray fixative and it isn't completely dry, you'll see this because the grains can move as steam escapes. If they are really tiny, this is usually caused by air bubbles caught in between smaller grains of enamel. Grinding your own enamels and wet packing can help, but there is always a risk of them appearing at any point in the process. They can also be caused by contamination such as the porcelain used to grind the enamels, dust, etc. I would recommend signing up for a course with Ricky Frank or Merry Lee Rae and working through different techniques and experiments to determine what the issue is and what works best for you to address it. Enamel is one of those things that we all do differently and this is a perfect example of hearing ideas from multiple people to try. Hope this helps!

    • @aneesrabie965
      @aneesrabie965 3 роки тому

      @@10Gables I really thank you for your fast response...Definitely this info will help me a lot...you made my day...💐