1.5 Tsi Ramair Induction Kit Installation and Before/After Sound
Вставка
- Опубліковано 26 сер 2024
- Link to Ramair Induction Kit: ramair-filters...
Don't forget I also have the Forge BOV kit too (FMDV22): www.forgemotor...
See my other video here for my review of that: • 1.5 Tsi Forge Blow Off...
After driving around a bit I love this even more, you can hear the turbo spooling up so much more and there is a lovely deep intake sound under hard acceleration!
I most certainly recommend this kit if you're after a sportier sounding engine note - performance doesn't feel any different but I'm sure it will help squeeze a big more power out when I get it remapped.
Next on my list is straight through exhaust, as the stock design is restrictive. Then remap to ~200Bhp (hopefully) - a poor mans VRS! :D
Looks and sounds great, easy to follow video and nice hints and tips to make it as simple as possible 👍
Thanks for the comment! :D
Great video, Glad you like it mate!
Thanks! Hopefully will help squeeze a few more ponies out the engine when I get round to remapping!
Love that brah
Can i do that on my brand new cupra leon 1.5 tsi?
I can feel a happy Chris with that intake noise :) nice car btw sir
Indeed my man, very much enjoyed ragging it about after work today!
Sounds wicked!
i had an unbraned blow off valve at my seat leon 1m 1.8 20vt and worked fine from 2001-2007.After i bought a leon cupra 1p 2.0 tfsi from 2007and put a forge blow off valve the sound was very bad and fake so i decided to take it off and sell it.Now i have a t-roc 1.5 dsg sport pack,and i am thinking for a rtmg blow off valve because its cheaper 280€ vs forge 380€ and with better noise as i heard from videos on internet,and a intake system but inside the oem box because the hot air from the engine it will get inside from the intake!!!!Also a tuning box from ABT that it will give 40hp more.
could have done with a bit more sound testing in the end. Whats it like from inside the car for example. Stock exhaust?
Yeaah stock exhaust, inside you can hear the low end spool really well in a high gear but the release "pshhh" is still noticeable even with windows up. I'll try and get a sound recording of inside the car soon!
Hello, can you post a video while you’re driving? Can we hear the voice came into cocpit?
Wonder is this will fit the 22 jetta here in the USA with the 1.5t can’t find nothing
What's the engine code for it? If it's DADA it will definitely fit! :)
What do you think about the 1.5 tsi engine is reliable?
Well I've had the car 3 years now and travelled 30k miles with no problems at all!
Does this cone material filter out fine sand? I live in a desert and sometimes there are dust storms not to mention dusty construction sites. Do you have to oil this one? Ive got a forge intake and im worried its not filtering out dusty sand particles
Hi, what is the length and width of the filter?
How did you get the original airbox out with the bungs. I seem to be pulling and pulling and just doesn’t budge
I just pulled the entire air box off directly upwards, if you struggle get some silicone spray on where the bungs are and it should help it slip off
if i installed this to a skoda 2014 1.4 turbo benzin engine, would it give it the same sound????
Very similar yeaah! 👍 Just be sure to get the right kit for the 1.4tsi
Is yours the 130 or 150?
The 150 :)
I'll be getting my intake this week.
Just got a mk4 skoda octavia 1.5.
Were did u get ur intake pipe from ?
Hey there, the induction kit is from Ramair, the BOV from Forge :)
next step on my sleeper Arona 1.5 tsi remap ^^
Did you get a remap on your arona? I have the same engine in mine,can't decide whether to get it done
Did ya notice any performance gains? And can people hear it from outside mate?
No really performance benefit other than allowing the turbo to spool better slightly after quick gear changes, and yes can deffo hear it outside, pretty loud considering the small turbo!
Is it safe to install the intake part without the blow off valve, in other words if all else is stock?
Yes, the OEM part doesn't have a BOV, if you are increasing boost pressure via a remap I would recommend a BOV, turbo surging has been proven to decrease the life span of the turbo. Stock pressures are pretty low so shouldn't have much of a detremental effect :)
How did you get the forge pipe to fit ( like expand it) to fit on the pipe
Sorry I don't follow, the Forge pipe (red left side) that comes with the BOV kit comes with two adapter rings which alter the size of the stock connections, one for the turbo inlet and the other off the intercooler. I have another video specifically on that, which might help? :)
Does this fit a Vw golf 1.5 tsi eco ?
I believe so, pop your bonnet and see if the engine bay looks the same? If in doubt check the manufacturers website! :)
im looking for one this kits for my ibiza 1.0tsi 115cv...
I haven't seen on from Ramair but check on their website :) - forge Motorsport do one for the 1.0tsi engine: www.forgemotorsport.co.uk/Induction_Kit_for_Skoda_Fabia_10_TSI_2017_Onwards_Colour_Red_Hoses--product--1673.html&colour=red%2Bhoses?gclid=CjwKCAjw6qqDBhB-EiwACBs6xyvskzV69DM7fCFc9oKm8VlTzH3YgpaPmwHylRdgzNFVh1xrvEp9aBoCoOsQAvD_BwE an induction kit for the 1.0tsi
did you notice any power loss? i would like to install
Nope none at all :)
Hello, have you tested this sistem on dyno before or after mapping your car?
I haven't had the car remapped yet but plan to very soon, then I will post before and after results :)
@@punchingcamaro
I wait for it with great curiosity😉👍
Hi mate. How do you remove the 3 rubber bungs from the old airbox?
You don't remove them, for me I got new rubber bungs with the kit and I just fitted them and push them into place :)
@@punchingcamaro okkkkay. Lolz. I realised that you need to take it all apart and then yank it out. Thanks 👍
What’s the cheapest way to get the whoosh sound that isn’t harmful to the engine?
You could find some sounds online, and either burn to CD or copy to USB and play the sounds really loud through your speakers! :)
Even erotic moaning?
Réel gain ? Performance ? Passage au banc ?
Avant kit admission et après ?
Je ne l'ai pas encore testé, mais j'espère que la voiture sera bientôt cartographiée.
@@punchingcamaro merci. J ai peur que cela chope trop d air chaud , non ?
A ce jour cela donne quoi ?
Des nouvelles ?
@@XKiL3xMoDzX le véhicule est mort lol😂
Getting the oem turbo elbow off the turbo with 5 hoses in the way is the most frustrating thing I have EVER ran into while working on a car. What an actual shitshow. Putting it back to stock and selling the car. New cars are way too complicated to maintain. I’ll take a 5 cylinder any day of the week anyway
Where i can buy this items?
On Ramair's website, Google it :)
Will this fits a 2022 1.5 turbo TAOS?
I'm not sure, you will have to reach out to Ramair directly or check their website :)
@@punchingcamaro ok thanks
@@punchingcamaro no tune is required for this?
Why de blow off valve? That noise are just stupid
Because it helps prevent the turbo from surging and because I can :)
Kann mir nicht vorstellen dass das nennenswert Leistung bringt
Nein, tut es nicht, aber es klingt großartig!
@@punchingcamaro 😃👍
Ist das im Straßenverkehr erlaubt?
@@kaih5022 kommt drauf an ob der Hersteller das ganze vom TÜV für ne Zulassung hat prüfen und genehmigen hat lassen
Rapid 🚗💨 😂😂
Will this intake fit in an audi Q3 1.5 tfsi? DADA engine
Probably, check in the RAMair website to see if you car is listed, if not, drop them an e-mail :)
What exactly is a DADA? Im intake shopping and the website says thisnis for DADA and i cant figure out if my 2022 ibiza Fr 1.5 (1.5 tsi) falls into this category
@@SparkySubie Kinda late but, DADA and DACA are 1.5 TSI from VAG (Seat, Skoda, VW, Audi,...) one is 150 hp and the other is 130 hp
@@romancervenka5741 Thanks for the reply :). I have since learned the engine and ECU names in my (futile) quest to find someone who can remap the new MDG1 2022 ecu's