Got mine put on today. A+ product. Truly one of a kind. It really added some spice to the front which needed help to begin with, in my opinion. These completely transform the appearance big time and will garner lots of comments and compliments. Thank you, Paragon!
Be sure to send us pictures when they're installed! We have our grille guards on now, that was the damaged caused before we developed and installed them 😬
@@ParagonPerformance definitely looks straightforward to me. Im curious if the grill guard mesh can be worked around without needing to completely take the front bumper off though. I have mesh guards but early versions before paragons had theirs come out. They are only attached via zipties. Planning to get yalls grill guards but thats alittle further down the wish list 😎
Very nice video, will help if I ever need to remove the bumper. I am not sure if I am sold on the appearance of the LED light bars, maybe if the "lens" was recessed on the bottom of the fin. As always, Paragon Per. has the best in products and it appears this is true again.
We're still glad the video was helpful for you. Removing the front bumper sounds intimidating until you actually do it and you're like "wow it was that easy". We understand that the lights aren't for everyone but maybe seeing them in person you'd change your mind. We personally are geeking out about them.
Tried install and it works with the 4 way hazards when the ignition is off. but I am seeing an issue where I get “Check Left Front Turn Lamp” and “Check Right Front Turn Lamp” warning on my gauge cluster and then the turn signal blinks rapidly. This is a 2024 Stingray. I think the car thinks the turn signals are dead. Any way to reprogram the turn signals?
Send us an email to Support@ParagonPerf.com It seems that the 2024 C8 Stingray has a new wiring pinout for the headlights which is causing an issue. We are looking into a solution.
Do you guys include installation with the price of these? I'm just 2 hours away in Cedar Falls and would gladly make the trip to Waukee to buy these and gave you guys install them.
Looks great, but install looks awful if you have gtill guards. Because the time would probably cost $600 for install and $600 for the lights totaling $1200 for fog fog lights.... thats why not many have it on their c8's.
We understand your concern but we just tested our Procharged C8 Corvette on the dyno and didn't notice any changes in oil or coolant temperature with these installed.
oh man - so disappointed!. put a much slimmer profile Phillips led bar in my Gallardo, tucked in front bumper at an angle- looks badass! These are WAY TOO FAT ! look bulky and dopey, imo
Got mine put on today. A+ product. Truly one of a kind. It really added some spice to the front which needed help to begin with, in my opinion. These completely transform the appearance big time and will garner lots of comments and compliments. Thank you, Paragon!
Glad you’re loving the product ❤️
These are a must have for my C8..........whenever I get off this allocation
Awesome, what a difference!
Glad to see those bottom side panels look about like mine all chewed up by the pavement lol. That stance life!
Self Clearance 🤣🤣🤣
Wow y’all make everything easy thank you. Keep up the good work.
Awesome video Alex and media crew
Thank you Geoff!
my set is in route !! cant wait to install them. you guys need to install a set of the paragon grill inserts lol !
Be sure to send us pictures when they're installed!
We have our grille guards on now, that was the damaged caused before we developed and installed them 😬
Looking forward to having these installed. They look great.
Send us pictures when they're installed!
You will have them, you are doing the installation 😁
@@braddoyle5788 Just saw it on our calendar :)
@@ParagonPerformance dam I wish you guys were closer to CA.
@@animeuchiha We're right in the middle of the country. Made it equal for everyone to drive to us 😅
Awesome video guys! This will make it way easier to install. 👍
Thank you! Hopefully we didn't make it look complicated. It's really straight forward.
@@ParagonPerformance definitely looks straightforward to me. Im curious if the grill guard mesh can be worked around without needing to completely take the front bumper off though. I have mesh guards but early versions before paragons had theirs come out. They are only attached via zipties. Planning to get yalls grill guards but thats alittle further down the wish list 😎
1:58 smooth edit Justin
That’s all Rob!
Very nice video, will help if I ever need to remove the bumper. I am not sure if I am sold on the appearance of the LED light bars, maybe if the "lens" was recessed on the bottom of the fin. As always, Paragon Per. has the best in products and it appears this is true again.
We're still glad the video was helpful for you. Removing the front bumper sounds intimidating until you actually do it and you're like "wow it was that easy".
We understand that the lights aren't for everyone but maybe seeing them in person you'd change your mind. We personally are geeking out about them.
Ooo got the chills! Love love this
Thank you! 👍👍
Tried install and it works with the 4 way hazards when the ignition is off. but I am seeing an issue where I get “Check Left Front Turn Lamp” and “Check Right Front Turn Lamp” warning on my gauge cluster and then the turn signal blinks rapidly. This is a 2024 Stingray. I think the car thinks the turn signals are dead. Any way to reprogram the turn signals?
Send us an email to Support@ParagonPerf.com
It seems that the 2024 C8 Stingray has a new wiring pinout for the headlights which is causing an issue. We are looking into a solution.
No payoff shots after all that work.
Payoff shots are them on your car installed 😁
@@ParagonPerformance Yes, on my ZedR1 installed.
These are very nice. My luck, a rock will hit and break one of them. One of my front cameras has a cracked lens (glass) from a rock hit.
Great video. How long would this job take do you think and what is a fair price for a shop to charge me to install these?
2-3 hours if you don’t have Radiator Guards. 4 hours if you do have them.
As far as price, every shops hourly rate is different so it’s hard to say.
Any plans for a version that works with the 2024 Stingray?
We're working on a new harness to work with 2024+
Bar should be flush with inside, doesn't look good sticking over "wishbone"part. Just my opinion
@@Swflac8 We appreciate the feedback!
Do you make fog lights for the C7 Z06 grill?
Nope, only for the C8.
Neat
Thank you!
How long does it take to install both light bars?
2-3 hours depending if you have radiator guards or not.
Z06 fitment? or coming soon?
No plans for Z06 Light Bars
Do you guys include installation with the price of these?
I'm just 2 hours away in Cedar Falls and would gladly make the trip to Waukee to buy these and gave you guys install them.
Installation is extra. We’d be happy to install them for you, give us a call or email support@paragonperf.com to schedule!
Anyone had these installed at a location in metro Atlanta area, if so, where?
Will these still work with Oracle LED lights? The color change ones
They don’t.
Looks great, but install looks awful if you have gtill guards. Because the time would probably cost $600 for install and $600 for the lights totaling $1200 for fog fog lights.... thats why not many have it on their c8's.
We make these videos so you can install them yourself for free. With Grille Guards we quote 3 hours of install time only.
I like the idea but I think the light is too thick looks like an off-road C8 now
In person it's not very large at all. About twice as thick of the oem part.
I’m with you on that…
Do these work with the oem grill guards?
We have not verified fitment with Scrape Armor (OEM) Grille Guards, only can confirm fitment with Paragon's at this time.
I'll let you know. I have them and my lights arrive Friday. Hope they work with them
@@1v1me_ Same here. Keep us updated please!
Online it says, "OEM Fitment - Bolts In" - I am taking that as in it does fit?! I get mine today and will see within the next few days.
@@kylehull2207 OEM Fitment as it bolt's in just like the OEM Bezel does.
Looks great, but air restriction is a little concerning.
We understand your concern but we just tested our Procharged C8 Corvette on the dyno and didn't notice any changes in oil or coolant temperature with these installed.
oh man - so disappointed!.
put a much slimmer profile Phillips led bar in my Gallardo, tucked in front bumper at an angle- looks badass! These are WAY TOO FAT ! look bulky and dopey, imo
This is the best option we found, a slimmer LED strip wasn’t bright enough. It’s not as bulky as it looks.
@@ParagonPerformance I put Philips Luxeon DRL light bar tucked into front grill a few years ago that are slim and look slick!
Here we are a year later and those things are just as ugly as they were a year ago. With the lights off those are just plain gaudy!
We appreciate the feedback.