How To: Installing Vertical Door Kit on a C8 Corvette l SIGALA DESIGNS
Вставка
- Опубліковано 29 сер 2024
- Purchase the vertical door kit here: www.sigaladesi...
We at sigala designs can travel to you to install your new vertical door kit or you also have the option to try it out yourself with this step by step video to guide you through the process.
If you are interested in seeing all the products we have available for your C8 corvette here is the link to our website:
www.sigaladesi...
⬇️ FOLLOW US HERE ⬇️
Instagram: ...
Tik Tok: vm.tiktok.com/...
Facebook: / sigaladesigns - Авто та транспорт
A lot of hate in the comments section from ppl who obviously never had vertical doors. I love them on my car and love the fact that no one else has them.
I dont have the guts to do this… i was cringing as you took apart that door but bro, SUPERB JOB 👊🏽👊🏽👊🏽💪🏽
I don’t own a vette but this is one of the best step by step videos i’ve seen 👍
Thank you for your comment! 🥰
I love it and I would absolutely install it on my C8.
Amazing Job guy's, It's especially great you did it for mom!❤ Many Blessings to you & your family.
Thank you so much!
Wow did it all on the drive way in so many hrs before the sun went down!! Amazing!!
we thank you for your support. all our installs can be completed in only a few hours!
If I ever get a corvette, i'm going to have it shipped to you guys to do this to it. Great work guys!
You guys must be on the West Coast cause y'all hustle!
Yes Wedt Coast all day 👍🤣😜
Good work guys thank you for the video. Wish y'all much success
Great job guys. One question you guys never showed the cutting of the metal frame part. Or was it only the plastic lip of the fenders that you cut off?
I would like to have these doors .I have 2022 stingray yellow. Where you guys located and how long it would take to install them?
Great video guys and great job installing the doors, I do have a quick question, how do you disconnect the wire harness on the door once the fender is removed??
behind the rubber boot there is a connector on the frame of the car and with a long flat head screwdriver its a matter of releasing the clip that seals the rubber connector. hope that can help 😁
Great job guys wooooooooooo👍👍👍👍👍👍👍👍👍👍
So, you have to open the doors out before you can lift them up. Then you have to apparently make sure the opened doors are out before lowering them to close them. I had originally thought that they just opened up from a close position like a Lamborghini. Looks good. The owner of my gym has a C8 Stingray with scissor doors and I asked him how easily they went up and down. He said, his wife need two hands to pull it down while he can do it with one. Both of them are gym rat types so I wonder if he has a different brand of door mounts that his very strong wife would need two hands to pull it down.
Should be a video on how to void ur warranty In 59 easy steps
I need these on my 1989 Honda CRX HF.
Any chance you have an install video of the ZLR C8 kit?
What’s the point of getting these doors which open like a normal door (enough to let a person in and out) and then goes up? Unless your just parked with the doors open (which no ones does) I don’t see the point of getting these.
The car culture guys that want to make a Corvette into a Lamborghini, even though the Stingray is better than a Lamborghini as a actual daily driver. Its actually quite hilarious that people are brainwashed for looks.
Because it looks cool at car shows, and makes it easier in some situations to get in/out. But it's mostly for show imo.
Because people like what they like they're brainwashed for looks that doesn't make sense to me
Great work, wish I could have the my door done
What's the point..it's the versatility. Dare to be different. This is coming from a 72 year old woman with a C8. See ya..zooom
AWESOME WORK.
What state and city are you in?
definitely need someone to make a 1 motion vertical door so then they can take my money
What you are asking is impossible because of how the stock doors are. The vertical door kit is the next best kit.
How much does a job like this go for and are you guys located in California
Holy shi.t those doors are great
Hello guys, I really enjoyed your installation. I ordered and installed my hinges. Everything works beautifully , except the door is now touching my fender. How do I make adjustments. Please help. Thank you. Keep up the good work, GOD BLESS.
Glad you enjoyed our installation. Give us a call 619-601-6091 tomorrow so you can speak to one of our technicians. They will be able to help you out. Where are you located?
Can the old hinges ever be put back on?
yes they can
Looks like you are not replying to comments, but I would like to know which spoiler is that at the end of the video. Is it a Z06 copy?
Hi there and sorry for the late reply. We get bombarded with messages every single day. We have no one really to take care of UA-cam but are working on it. The wing you see is the Z06 style spoiler for the C8 You can check them out on our website at sigaladesigns.com
Very nice
Hey brother, I’m originally from San Diego but now I live in Scottsdale and nobody out here does it I don’t know if you ever make a trip out here but I would love to get those done to my Corvette
Reach out to us on our website and we'd be glad to get you scheduled for install 😁
have none of the people in the comments that are "confused" on the utility of this never heard of adding cosmetic mods to your car 💀 like can mfs really not comprehend that some people like the look and want to display it at car meets possibly 😂
Would love to see jesko doors for it
I would NEVER devalue my C8 by putting those rice doors on it. You don't see Ferrari, Huracan or Porsche owners installing this. Leave that for the kids cars.
On a different note, is Sigala going to be making or selling a C8 Z06 low wing (carbon fiber) ?
If so, I'd like to purchase one for my non Z06 C8 ..
I agree ..straight devalue ugh 😣
That’s such a derogatory comment. It’s always you purist nutt jobs that want to throw out the “ricer” comment when all along, everything about the C8 screams European. We copied it and it looks great. Hell, we even copied the Ferrari engine to create the z06. But you purists want to complain about the doors? Please take a seat.
I agree with the other commentary, what is the point in opening door almost all the way just to then lift it.... again ,,, makes no sense
Because those of us with big feet, keep kicking the door upon exiting, even when it’s wide open! Raising the door out of the way makes it easier to get in and out. I literally knock my door every time! Lol, if you have small feet or are smaller, you won’t have this issue. And it’s also a show piece for conversation at car meets.
I have them on my i8 (factory). It makes it.
Just a quick question you said that the doors can be fixed back to normal what about all the cut parts, how do you take it back to the normal opening when you've made some adjustments by cutting stuffs
The brackets that were cut to make room for the new Vertical door hinge are not crucial for the stock hinges to be bolted back on and can be alligned the same way to allow the car to open and close like it did from OEM.
I see it like this. Lambo *STILL* puts vertical doors on their flagship, McLaren puts a variation on their models. There is NOTHING wrong with putting them on another mid engined sports car.
We agree with you 100%!!!
I am in LA , can you help me install it on my c8?
Will the doors stay up if the car is parked on a "serious" uphill?
What’s the price (both DIY and install) and can you just install the driver’s door ?
Why does no one ever say what pound the shock is
I’m very confused with the point of these doors. How does this help ingress or egress. I think this falls under the saying, just because you can doesn’t mean you should. I do think they did a very professional install. Well done in that regard. Cheers!
Do you guys do the C7 Corvette do you have a video and how much are the hinges
Yea we do. Just call us at 619-601-6091
The ideal kit for me would be doors that work like the Koenigsegg's doors, called dihedral synchro-helix actuation doors. That’s the ultimate way ( ua-cam.com/video/zbDgIO1_9Jg/v-deo.htmlsi=FX3OGcuudMAmINzz ) a door should work (in my opening. Short of this, I think the door should still be capable of fully opening to its max OE space when not swinging up to vertical.
Cost for the kit + install?
Text us or call us at 619-601-6091 on Monday and we will help you out.
What state are ya'll in?
California but we travel all over the world.
I started laughing when the door opened normally then went up Absolutely pointless
Every aftermarket kit is like that. Because they weren’t designed with the necessary geometry to pivot straight upwards, they have to swing out to get clearance to go upwards.
Agree! 16:47 She opened the door and was about to get out.....and I was like....wait, did they put the stock door back in? Then she started to lift it up when it was full-blown opened.
So pointless 😂
I kept shouting "DON'T PINCH YOUR FINGERS!!!!"
That's cool. What's up with moms though. 😳
🤷♂️???
@@SigalaDesigns Just sayin....she's hot bro.
Get a Lamborghini
but its WAY MORE EXPENSIVE specially if to driven regularly. this is the best you can get with as close you can get to a super car feel with lambo doors for way less
Where location, have one California????
You just completely ruined any resale value of this car!
What a joke!
It can always go back to stock. 🤪
Who’s caring about resale when they bought the car to enjoy it! Lmao, resale. Smh, cars depreciate! Might as well Enjoy it!
it will not last long
I think vertical doors are very stupid I don't see the point and I don't think they look good and I would never do that to a new car if they come with a car all right but I think regular doors are good enough
Great job guys. One question you guys never showed the cutting of the metal frame part. Or was it only the plastic lip of the fenders that you cut off?