Reading Glock Markings: What Can They Tell You?
Вставка
- Опубліковано 4 жов 2024
- The markings on your Glock can tell you alot about it; IF you know how to read them, and although some markings are no longer used, there are still Glocks in circulation that possess those older markings.
#glock
This dudes awesome. Puffin on a cigarette BS’n ab guns w a jar labeled “Glock sh!t” on his desk. I feel like I’m at my grandpas house. Love it.
Thank goodness someone finally explained the 3D symbol. I was simply curious about it, and the internet kept showing me 3D printed Glocks and auto sears. Like bro I don't care about that stuff I just wanna know about the barrel marking. Thank you sir!
@Stinko the stool eater
Lol, yeah I've got a curious mind as well. Thanks for watching, brother 👍
My G27 barrel only has 40 on it, no AT, US or Glock symbol. Go figure.
Thanks for the video, I’ve been watching several of them since finding you last night. Good stuff.
@Dan Mac
I have no explanation for the absence of barrel markings, but I'll try to do some research on that...Thanks for watching, and welcome! 👍
Sounds like you have a replacement barrel in your G27
My G19X barrel has all the right markings but I have a replacement threaded barrel for my 19X that just says 9X19 - 19
i’ve been searching everywhere for a detailed explanation of this. thank you sir 👏🏽👏🏽
Good information thank you. They now make the 380 Glock 28 in the US. It just came out a few days ago.
@Roy Paul Carter
Yes I just heard the same thing. Thanks for your comment, sir!
Absolutely amazing and top video . Great smokin and talking style.
Next time I dive in the safe, I will look at my glocks very close, never knew all this about them, but its really good to know, if I can remember 90 % of it. Somtimes I skip a gear here an there. Thx for the vid Antonius
After watching this , I found the box my G23 came in & found the two proof brass cartridges. They look like CCI Speer Blaser one-shot-wonders. FYI only the proof date was 11 Sept 2001.
This is a GREAT video! Thank you so much for the information.
the Glock 19 Gen 3 USA model 🔫🤠
Great info OG
Gotta Glock 26 Gen 5 MOS thats got USA on frame, barrel and slide. Aslo has : Made in Smyna Georgia on frame.
Sir, you mentioned that each Glock pistol is accuracy tested at 25 yards. Is this why some of mine arrived with a 6.1 rear sight and some arrived with a 6.5 rear sight?
@billh.6529
The distance tested at the factory was the last information I had at the time (which was several years ago), so it may have deviated in some ways since then. For some odd reason, it seems that there has been many Glocks of the same model distributed by the factory with different sight settings. I've witnessed this myself. However, I can say personally that I've owned a few model 22's and a model 21, all consistent with the proper sight settings. But that's not always been the case with many other folks, and I am at a loss to explain that.
@@shootinitstraight4162 Thanks so much for responding! My Gen 2 and Gen 4s were delivered with 6.5s, but my Gen 3s all came with 6-1s. (I've switched them over to 6.5s also.). It always seemed odd to me. Thanks again!
@@shootinitstraight4162could it be they just use whatever they have
I have an EARLY Glock 23 from 1990. Its 100% Austrian made with the 40SW Slide my marking, but on the dust cover it has the suffix "US" to indicate that the gun is to be imported to the US.
Question for you sir: is the grade 6 vs grade 5 steel determined strictly by the proof testing each gun went through, or is it actually a different steel entirely? I cannot find any information on that topic. If it is different steel, do you happen to know the metallurgical differences?
@theshapeexists
Excellent question, of which I cannot answer with great accuracy. I do know that Glock manufactures the steel that they use, and that the higher grades are reportedly stronger. At any rate, either grade (5 or 6) is strong enough to easily handle the over-pressured test loads.
@@shootinitstraight4162 thank you. I currently own over a dozen Glocks and the only one rated as grade 6 is an old gen 3 21, while my gen 3 20 does not. Makes me curious as to the rhyme or reason Glock would use different grades. Perhaps some customers require different grades. it must not be too big a difference with my high pressure round Glocks like 10mm not having grade 6, while a low pressure 45acp gun uses grade 6. Interesting stuff.
I have a USA made G43x are the US made batches match the quality of those made originally by Austria factory?
@Mrsdstry
All of the machines, materials, and processes used by Glock in Austria are also used in the U.S. the steel and polymer are exported here from Austria.
wait…so the pentagon symbol basically means it wasn’t in cooperation with NIST and that means its more difficult to be identified by police/governmental agencies? i have a G19 Gen 3 with the dot in the pentagon made in austria and the frame manufactured in GA. does this indicate rarity in any way? sorry for the continuous questions
@AlexDhaLion_
The "pentagon" symbol simply indicated that the bore had polygonal rifling. Complying with NIST is voluntary, but the newer Glock "Marksman" rifling in Gen 5's are easier to match fired bullets to.
Not sure about your G19, but if it's a Gen 3, good chance that both the frame, slide, and barrel were made in Austria, but assembled in GA.
@@shootinitstraight4162 thx for the explanation. very educational stuff from what i’ve watched so far. i am definitely implementing your recommendations with your “proper grip video”. simple knowledge of physics coupled with your explanation on grip while the slide is moving linearly in a back and forth motion with the slight forward movement is definitely going to make me try it out on the range. i couldn’t get this type of advise even if i paid for it for classes. thx for your input. definitely gained a new subscriber with me. keep up the great work
Wat if it says 3 d
But I purchase my Glock 22 Gen4 back in 2015 it had the package with the two empty cartridges when I purchased my glock 26 Gen 4 Glock 17 Gen 5 none of these two had the test cartridges that came with my new Glock 22 Gen4 when I purchased it back in 2015 I purchased all three of them brand new..
@Joe Adler
Hmmm... I wonder if they have since stopped that tradition then. It's been over a decade since I bought a Glock, so it could have changed since then (?). Thanks for the info! 👍
I bought a used 19x. How do I find out what gen the 19x is?
@wilburnmorris8607
The 19x came out in 2018, so the frame is either gen3 or gen4. If the frame is designed to accept multiple backstraps, it's a gen4. The slide will have "Gen 4" etched on the side of it.
It does have the multiple back straps but nothing on the slide. That’s why I asked. So thank you
got dammmm - is that mat colored yellow from nicotine smoke yella or just the factory beetle bug yella?
@Get TonedFitness
It's the typical beetle bug yella, but I'm trying my best to change it to the nicotine smoke yella.
Hello sir
May i know that is it fine that my glock 17 has different numbers on inside frame and slide as well
Means inside’s frame number is not matching to the slide
@@ihtishamafsar2653 The only numbers that matter are the exterior frame # and exterior slide #. The long number inside the frame next to the rails is an internal factory tracking number, not a serial number. 👍
@@shootinitstraight4162 thx a lot for assit me
Wat if it says 3 d
@PatPat-w8r
The oval "3D" marking replaces the previous pentagon shape, and just denotes that it is cooperating with the 3D ballistics database for research that was created by the NIST (national institute of standards and technology) that helps to positively identify bullets fired by that particular barrel.