Very good introduction. I already have 3 of the 4 boards described except the STM32, which I plan to try. I am using also the BeagleBone Black, which is comparable with the Raspberry Pi, and has lots of I/O pins. Thanks!
Hi Jacm, very true I also agree Beaglebone Black is also one contender in the list when it comes to learning Embedded Linux but still Raspberry Pi can also serve the purpose. Have a Good day, Thanks!
I have 1 Arduino Mega2560 r3, several Arduino UNO r3, and 4 Nano boards. I also want to add the STM32 and ESP8266 or ESP32. The Raspberry Pi 4 is just too expensive right now, and I sob every time I remember putting off buying one when the prices were affordable about a year ago. I did however acquire the Raspberry Pi 400, and my research showed that it's almost as good, if not as good, as the Raspberry Pi 4. Your video was brief, yet extremely informative. I enjoyed it. Thanks.
Hi, this video is really helpful. I want to make a touch screen controller where i can set temperature and it could controller two compressors. (-80 deep freezer) I think your suggestion will be good n helpful. After that my plan is make a more complicated controller for a centrifuge machine. Can pls suggest something on this. ??
I have an 8-bit HT48R32-B-0 microcontroller in my hi fi audio amp and need a programmer to copy the data to another HT48R32-B-0 so I can fix my second identical amp. , do you know what am i looking for and can you help with a device that will program that. i have the original chip so i just need to copy the info onto a blank one. Thanks
Hi Pooja, you can find temperature ratings of a microcontroller in manufacturers datasheet. I don't remember exactly at this moment because I work with several microcontrollers for different projects based on use case. Good luck
Thank you very much for this easy to understand and very helpful video... Subscribed to your channel... Requesting you to make video series about STM32 boards and ARM programming.. It would be great help.
Hi Sameer, I'll consider putting more video lessons around STM32 Microcontroller programming with Proteus. It may take few months or weeks depends as per time availability. I hope you understand time it take to create quality video to share. Thanks for your input and I'll try my best. Good day!
@@BINARYUPDATES thank you very much Umesh for your reply... . I already joined one course last night.on Udemy from your courses.. . The one you have created about AVR Atmega328 with Atmel studio.... Its excellent course.. Already through 5 lectures and enjoying it.
@@BINARYUPDATES Hello Sameer, I'm also learning STM32 with Proteus. If you need any help, happy to support you and I will also learn about STM32 in-depth. Thanks.
Hello sir great video, after watching it i really wanted to buy one of these and get started can you recommend me from where should i buy in india? and what is your opinion about buying a genuine board vs fake/copied/cheaper one? Thanks in advance
Hi Nikhil Beaglebone black is good if you want to focus on learning or prototyping something around Embedded Linux something like porting Yocto Project. I personally prefer BB in projects where embedded Linux will be preferred. You can purchase, it will worth Good luck and best wishes Umesh
Hi Selvaraja, arduino uno is best if you're absolute beginner and then move to STM32 Nucleo Board to learn professional microcontroller firmware development. Actually, it doesn't matter much between both whether you start with AVR ATmega328 on Arduino or STM32 on Nucleo board. Best Regards Umesh
I want to work in medical device development and i have graduated from electronics and communication engineering from india and work as Embedded software , is it possible?
@@BINARYUPDATES Where to begin sir? i am also interested in the medical development but i work as WLAN developer with 2 years of experience will i need to start over?
Hi Anuj, there are software simulation tools like Proteus and Tinkercad. You can use these tools for learning very basic but always consider learning microcontroller programming on real hardware. Wish you good luck
I want to get a job on embedded coding on controllers, currently working as a java developer can I change my job to embedded coding is it possible is there opportunities in India ??
Yes, its possible but it will take serious work around embedded systems to qualify for jobs. I would suggest you to buy Arduino and Raspberry Pi. And start building projects with microcontroller boards to gain hand-on experience in the field of embedded. I wish you good luck.
Very good introduction. I already have 3 of the 4 boards described except the STM32, which I plan to try. I am using also the BeagleBone Black, which is comparable with the Raspberry Pi, and has lots of I/O pins. Thanks!
Hi Jacm, very true
I also agree Beaglebone Black is also one contender in the list when it comes to learning Embedded Linux but still Raspberry Pi can also serve the purpose. Have a Good day, Thanks!
Wow thank you sir , sir I learn arduino+ esp32 ,iot and device drivers , now I am learning arm Cortex 4 . Can you suggest any course on UA-cam?
I have 1 Arduino Mega2560 r3, several Arduino UNO r3, and 4 Nano boards. I also want to add the STM32 and ESP8266 or ESP32. The Raspberry Pi 4 is just too expensive right now, and I sob every time I remember putting off buying one when the prices were affordable about a year ago. I did however acquire the Raspberry Pi 400, and my research showed that it's almost as good, if not as good, as the Raspberry Pi 4. Your video was brief, yet extremely informative. I enjoyed it. Thanks.
Thank you Mr. Henri!
Thank you, very informative video. I got myself an arduino to start.
Great! Best wishes! Cheers!
Hi, this video is really helpful.
I want to make a touch screen controller where i can set temperature and it could controller two compressors. (-80 deep freezer)
I think your suggestion will be good n helpful.
After that my plan is make a more complicated controller for a centrifuge machine.
Can pls suggest something on this. ??
I have an 8-bit HT48R32-B-0 microcontroller in my hi fi audio amp and need a programmer to copy the data to another HT48R32-B-0 so I can fix my second identical amp. , do you know what am i looking for and can you help with a device that will program that. i have the original chip so i just need to copy the info onto a blank one. Thanks
Thank you So much ...!
Which microcontroller board have the operating temperature range from -60 to + 80 celcius ?
Hi Pooja, you can find temperature ratings of a microcontroller in manufacturers datasheet. I don't remember exactly at this moment because I work with several microcontrollers for different projects based on use case. Good luck
THANK sir for resolve my confusion
You're welcome !
suggest best controller board with ethernet communication port?
Thank you! Great content on embedded systems
Glad it was helpful! Thanks for your time leave a comment
Best Wishes
Umesh
Thank you very much for this easy to understand and very helpful video... Subscribed to your channel... Requesting you to make video series about STM32 boards and ARM programming.. It would be great help.
Hi Sameer, I'll consider putting more video lessons around STM32 Microcontroller programming with Proteus. It may take few months or weeks depends as per time availability. I hope you understand time it take to create quality video to share. Thanks for your input and I'll try my best. Good day!
@@BINARYUPDATES thank you very much Umesh for your reply... . I already joined one course last night.on Udemy from your courses.. . The one you have created about AVR Atmega328 with Atmel studio.... Its excellent course.. Already through 5 lectures and enjoying it.
@@BINARYUPDATES
Hello Sameer,
I'm also learning STM32 with Proteus. If you need any help, happy to support you and I will also learn about STM32 in-depth.
Thanks.
Very nice!👍👍👍
Thank you!
Very good! Greetings from Brazil
Thanks and love from India
I am having stm8 nucleo 32 stm8s207k8 board... i want to know how to use it to program baremetal chip? Pls help
Hello sir
great video, after watching it i really wanted to buy one of these and get started
can you recommend me from where should i buy in india?
and what is your opinion about buying a genuine board vs fake/copied/cheaper one?
Thanks in advance
Hi Shashank, you can buy from amazon India or from Robu India etc.
@@BINARYUPDATES thanks
Great videos man
Hi Mhael
Glad you like them!
Thanks a lot for comment
Happy Embedded and Microcontroller Programming
Very good video. Thanks for the information.
Our pleasure Rhett!
Very nice video sir... Thank you. Will join you soon 👍👍
Looking forward to help you to become future Embedded Systems Professional. Good luck and best wishes
Umesh
Very nice! Thank you :)
Our pleasure! Thanks Felipe
Sir what about beagle bone black ?? As I am a newbie in this field and If I purchase it for practice
Hi Nikhil
Beaglebone black is good if you want to focus on learning or prototyping something around Embedded Linux something like porting Yocto Project. I personally prefer BB in projects where embedded Linux will be preferred. You can purchase, it will worth
Good luck and best wishes
Umesh
@@BINARYUPDATES thank you sir
Awesome explanation. 👌
Thank you 🙂
Which is best for beginner
Hi Selvaraja, arduino uno is best if you're absolute beginner and then move to STM32 Nucleo Board to learn professional microcontroller firmware development. Actually, it doesn't matter much between both whether you start with AVR ATmega328 on Arduino or STM32 on Nucleo board.
Best Regards
Umesh
I want to work in medical device development and i have graduated from electronics and communication engineering from india and work as Embedded software , is it possible?
Yes, its possible to work in medical device development as embedded engineer
@@BINARYUPDATES Where to begin sir? i am also interested in the medical development but i work as WLAN developer with 2 years of experience will i need to start over?
Any simulation software/tool there we can easily learn and code Arduino , in case of didn't buy board
Hi Anuj, there are software simulation tools like Proteus and Tinkercad. You can use these tools for learning very basic but always consider learning microcontroller programming on real hardware.
Wish you good luck
@@BINARYUPDATES thanks 🙂
I want to get a job on embedded coding on controllers, currently working as a java developer can I change my job to embedded coding is it possible is there opportunities in India ??
Yes, its possible but it will take serious work around embedded systems to qualify for jobs. I would suggest you to buy Arduino and Raspberry Pi. And start building projects with microcontroller boards to gain hand-on experience in the field of embedded. I wish you good luck.
@@BINARYUPDATES thanks I will start working
may i know list of 16 bit mcu boards
Hi, I have seen some popular PIC16 series of 16-bit microcontrollers from Microchip. But i don't use them these days. Best wishes!
Great
Do u have a telegram channel ?