One thing i like about the flysky is it has the abs break adjustment i think is good for track racing specialy the light pump setting on abs when break is applied
I can't wait till you do more on road videos brother 👌👌i only do on road but iv always loved your videos look i look forward to seeing more my brother 👍👍👊👊🔥🔥🏎💨💨💨
looking good bro. going to Portugal on October hopefully i can get some footage of the local track there, if i remember correctly they race 1/5 scale F1 cars. :)
Brutha man, I want those tires, track day hobbies don't have a website I can order from 😭😭😭😭 and I Googled them no baja ones....I'm telling you my foams in those tires or hostiles will stick like it's on rails, especially with that being AWD
Some other time I will . That all depends on what your running and where and how! Bash , Race with lots of turns , drag racing, off road racing, and also different tracks will also change how you do your toe and camber
If you want mine ? Let me know . I will soon be removing them . I only used them once at the o road race track and never ran it again. If you want them just give me a call and we will talk about it .
@@BOTAJELL hey John, they should work. If them stock losi hubs worked on it, just buy the IRP BRP losi adapters and it should work out! I wanna see that happen 👀👍
It would also work great with a LiFe battery 🔋 because the stock regular 6volt did just fine last time but it would bind up every now and then so I disconnected one arm and the stock 6volt did great and the 1 stock Rovan servo also did great and will do better once I use my LiFe 6.6 / 6.8volt on it. If I use a better servo it will be even better and definitely no need for the second servo at all
@@6ixside5thscales13 the best tires I've had are mad Max street tires or duratrax street tires. The key is the foam, you need a super soft foam that allows flex so they act like aired down car tires in mud, sand, snow. I'm going to make a bullshit video tonight or tomorrow showing John my custom foams and how they squash out... I run those foams on my baja 5b I made and 45cc ported motor and it just hooks, so much so I strip wheel hexes on cheap rims.
Brother for real on road tracks those are not even near the best for bashing sure but for clean tracks i would disagree, my fgs wheels dont have any foam at all also the champion racers also dont use foams in there wheels
One thing i like about the flysky is it has the abs break adjustment i think is good for track racing specialy the light pump setting on abs when break is applied
Niiiiice, i gotta get one of these.
absolutely epic👍
Im liking that f5 john looks pretty killer
Nice Vid! Wow that body has some serious TROPHIES! Keep up the good work!
🤝💥👊💥
Getting her ready for some track action, good stuff!
Nice John, great Video good luck man!
looking good bro see you the 25th.
I hope 🤞 so brotha ! I got lots of things coming up soon but I will do my best .
I can't wait till you do more on road videos brother 👌👌i only do on road but iv always loved your videos look i look forward to seeing more my brother 👍👍👊👊🔥🔥🏎💨💨💨
And I would use the one u took off. It's further from the exhaust Meaning it will pull cooler air in making your engine run better
🤝💥👊💥
Awesome stuff brotha.
Thank you 🤝💥👊💥
133 K Bro,Sick¡💥💥💥Bash
Max Kohler brutal
SO GOOD~
Ray is a damn good guy !
AWSOME !
Great videoo again brother 👌👌👌🔥🔥🏎💨💨💨
vidal cunha thank you brotha Cunha 🤝😂👍😂👊💥
looking good bro.
going to Portugal on October hopefully i can get some footage of the local track there, if i remember correctly they race 1/5 scale F1 cars. :)
Yes there are a few beautiful tracks in Portugal 🇵🇹! I can’t wait to see it brotha!
Oh man umar’s not going!
I want him to do the commentary like last time! Lol😂 good luck bro👍
Lmao 🤣 me to I was looking forward on that. He would had been amazing this time around if he went lol 😂
Should have used the red nuts on the Axel's. It would have looked better with the red writing on the wheels
bro you work on your RC's better with one hand then most people with two! hahahahahaha nice video!!
Lmfao 🤣😂🤣💥🤝💥👊💥
🏎
Brutha man, I want those tires, track day hobbies don't have a website I can order from 😭😭😭😭 and I Googled them no baja ones....I'm telling you my foams in those tires or hostiles will stick like it's on rails, especially with that being AWD
Track Day Hobbies
1542 Hempstead Turnpike, Elmont, NY 11003
(516) 233-2960 g.co/kgs/Wtvh3w
You could make a heatshild between the airfilter and pipe from Carbonfiber ?
like a gentlemen
I have to get that spiral diaphragm
Isso quer é pista!!!!!!quando sai o video dele a correr em pista?
Botajell do you make any videos on wheel alignment and adjusting toe I would like to know more about it? Thanks
Some other time I will . That all depends on what your running and where and how! Bash , Race with lots of turns , drag racing, off road racing, and also different tracks will also change how you do your toe and camber
We need a 1/5 scale rc shop in South Florida
I hear you brotha 💥👍💥👊! You should open one up! Especially if there are local tracks nearby
I been looking for them triton tires ddm had them for a bit
If you want mine ? Let me know . I will soon be removing them . I only used them once at the o road race track and never ran it again. If you want them just give me a call and we will talk about it .
What did you use to cut your 5th scale windows out? Thanks
I used multiple things like a drill with a different size drill bits , a knife 🔪, scissors ✂️, a Dremel, and a File.
@@BOTAJELL ok thanks I was wondering did you use a dremel because I thought a dremel might melt it.
First John
🥇🏆💥🤝
Nice rig bro! I've got a question will brps fit on it?
Don’t know I’m going to try ! I’m having special 2 inch brps made to use on standard IRP hubs
@@BOTAJELL that's going to be badass,brp road tires will make that rig look outstanding!
@@BOTAJELL hey John, they should work. If them stock losi hubs worked on it, just buy the IRP BRP losi adapters and it should work out! I wanna see that happen 👀👍
im thinking those tires will work out
????????
Where is this race happening?
It was on the next day on 8/10/19 in N.J.
2083 S. Black Horse Pike, Williamstown, N.J.
Damn man I wish I had gas power but I got electric lol nice video man
If you live close to me ? I’ll help you drop in a real breathing engine No worries 😉. Let’s plan out a Saturday that we are both free .
@@BOTAJELL sorry man im in a different state sorry
big head lol up to you brotha . If you want to do something let me know and we’ll set something up . Have a good day
How fast this car can run?
First👍🏼🔥👊🏻🍻
🏆🥇💥
botajell with your wheels triton will falter that you change t one engine higher than this original mini G340
where you racing ❤my brother
Dual servos would work fine with a 7.6v lipo.... NMHI suck
It would also work great with a LiFe battery 🔋 because the stock regular 6volt did just fine last time but it would bind up every now and then so I disconnected one arm and the stock 6volt did great and the 1 stock Rovan servo also did great and will do better once I use my LiFe 6.6 / 6.8volt on it. If I use a better servo it will be even better and definitely no need for the second servo at all
Hey brother why dont you use the mcd tires they would be the best you could use
No
No ? You think those are bettwr then mcd tires ?
Better*
@@6ixside5thscales13 the best tires I've had are mad Max street tires or duratrax street tires. The key is the foam, you need a super soft foam that allows flex so they act like aired down car tires in mud, sand, snow. I'm going to make a bullshit video tonight or tomorrow showing John my custom foams and how they squash out... I run those foams on my baja 5b I made and 45cc ported motor and it just hooks, so much so I strip wheel hexes on cheap rims.
Brother for real on road tracks those are not even near the best for bashing sure but for clean tracks i would disagree, my fgs wheels dont have any foam at all also the champion racers also dont use foams in there wheels