All The Mods I've Done To My 1992 Honda NightHawk CB750 (So Far)

Поділитися
Вставка
  • Опубліковано 9 лип 2022
  • List of All the little things I've Changed or Upgraded to my 1992 Honda NightHawk 750 CB750
    All good RestoMods begin with a Full Service:
    -New Castrol Synthetic Engine Oil
    -New STP Oil Filter
    -New NGK Spark Plugs
    -New EMGO Air Filter
    -Synchronized the Carburetors
    Parts That Needed Changing:
    -New EBC Front Brake Pads
    -New OEM Honda Rear Pads
    -New Niche X-Ring Chain
    -New Head Cover Gasket
    -New Head Cover Bolt Washers
    Upgrades and Mods
    -New Headlight Bezel from Older Models
    -New 7" H4 Universal LED Headlight with DRLs
    -New Conventional Turn Signals
    -Wind Deflector or Windshield
    -New Adjustable Clutch and Brake Levers
    -Engine Protectors or Drop Guards
    -PCV vented to Atmosphere
    -New Longer Shifter Link Bolt
    -Slip On Converted Aftermarket Mufflers
    Other Services included running concentrated carburetor or fuel injector cleaner in the fuel and riding it like i stole it (Italian Tune Up) and cleaning the front fork seals, and general lubrication and adjustments
    Full disclosure, nobody sponsored this video, the parts i got were chosen on cost and availability and were payed for with my own money
    Honda CB750 CB 750 NightHawk Four 1991 1992 1993 1995 1996 1997 1998 1999 2000 2001 2002 2003 Mods Custom Modifications Restoration RestoMod Cafe Racer Bobber Tracker Scrambler Cruiser Chopper Classic Brat SuperBike Super Sport SuperSport Standard Motorcycle Bike Moto
  • Авто та транспорт

КОМЕНТАРІ • 40

  • @morganfreeman710
    @morganfreeman710 Місяць тому +2

    I might need to do some shit like this to my 93 nighthawk.

  • @propdoctor21564
    @propdoctor21564 Рік тому +2

    I have the same black 1992 which I bought a couple years ago and really enjoying it...
    I like all the little modifications you did especially the exhaust because mufflers or even complete exhaust systems seem to be hard to find.
    Mine is all stock and excellent condition and I plan to leave it that way but it's always nice to have options. 👍

    • @BadAssEngineering
      @BadAssEngineering  Рік тому +3

      The issue with these older bikes is that OEM replacement parts are getting harder to find, to keep one pristine and stock, you could consider buy a parts bike

  • @Bacicot
    @Bacicot Рік тому +2

    Great video, lots of info and good narration/camera work!

  • @uredskivid
    @uredskivid Рік тому +1

    Good vid , fast , concise and informative -KUDO's

  • @davewin1792
    @davewin1792 Рік тому

    Great intro (creative) nice job on the bike.

  • @TTVSLEEPYGENZ
    @TTVSLEEPYGENZ Рік тому

    Amazing! Like to. The headlights

  • @joelzapata2494
    @joelzapata2494 Рік тому

    Nice bike

  • @gabrielramireznahim1904
    @gabrielramireznahim1904 Рік тому

    Bonita moto.Saludos.

  • @bananas8779
    @bananas8779 4 місяці тому

    The next upgrade you should do is to install a 41mm front fork stabilizer (the VTR1000F share the same size), get progressive springs for the front forks and some gas charged adjustable struts for the rear. Since you have mufflers on and you took out the emissions equipment you need to reject the carbs because the california models (the one you have) have carbs that are made to run with the equipment you removed, if you don't then you will risk engine problems later on. Then if you are willing to forgo a bit of comfort I would get clip ons and a linear steering dampener. After that you would have a very capable bike! Take it from me, i also have a 1992 Nighthawk 750.

  • @dcwebb1
    @dcwebb1 Рік тому

    Very nice exhaust mod! That idea will help out many NH 750 owners wishing to change out the stock mufflers for any reason. I personally went with a 4 into 1 Vance & Hines exhaust (sounds GREAT BTW!, but carbs needed a re-jet).... but I do like the idea and look of dual custom mufflers on the NH. Nice job. How about some sound clips at WOT?

    • @BadAssEngineering
      @BadAssEngineering  Рік тому

      I wanted a 4-1 system as well, but theyre too hard to find, making the stock exhaust to be a slip on was the only way to go for me

  • @dcwebb1
    @dcwebb1 Рік тому +1

    Very nice NH 750, those are really great all around bikes. That 750 engine is legendary and when in tune, they run like a swiss watch! I like the seat, where did you get it?

    • @BadAssEngineering
      @BadAssEngineering  Рік тому +1

      Stock seat, wrapped with a mesh thingy, bike came like that

  • @markpezenosky5592
    @markpezenosky5592 Рік тому +1

    I got one just like it in blue

  • @samcollins5555
    @samcollins5555 Рік тому +2

    Liked the video, but I had a question have you heard of or seen a night with an EFI system.

    • @BadAssEngineering
      @BadAssEngineering  Рік тому

      Since they were discontinued in 2003 in the US I believe, no, I don't know if in Japan any further models had EFI. These bikes are carbureted but have electronic spark ignition (CDI)

  • @markzagata6925
    @markzagata6925 Рік тому

    Can you make a video on how you did the pcv?

  • @craigbmm4675
    @craigbmm4675 Рік тому +1

    I like the sound of that muffler mod .. origanally they are very quiet .. too quiet .. i moded the baffles on mine .. sounds better

  • @nosoulxomma2474
    @nosoulxomma2474 День тому

    Do you have link for the mods u added?

  • @imperfectcell8224
    @imperfectcell8224 Рік тому

    can you maybe please please please ! link all of the mods and maybe do another video showing all of the mods you have so far now?

  • @user-dg7qy9uc7v
    @user-dg7qy9uc7v 2 місяці тому

    is there anyway that you could send me the link of those clutch and brake levers???

  • @louisphilo6048
    @louisphilo6048 5 місяців тому

    hey man real keen to find out where you found those levers?

  • @Mr.NightGixxer
    @Mr.NightGixxer Рік тому

    Have you had any issues with the pcv delete by just adding a open hose to the crank case breather? Does it spit out oil or hurt the bike in anyway? I'm thinking of doing it on my 02 750.

    • @Mr.NightGixxer
      @Mr.NightGixxer Рік тому

      Also what levers are those? Did you get them off Amazon or eBay? If so could you add the link I've been looking to replace the stock ones as well.

    • @BadAssEngineering
      @BadAssEngineering  Рік тому +1

      @@Mr.NightGixxer the pcv delete is just so the carbs breathe clean cold air, if the engine is in good shape, no oil drips out of mine. The levers I got from the Mexican equivalent of eBay

    • @Mr.NightGixxer
      @Mr.NightGixxer Рік тому +1

      Okay I've been watching videos about the pcv delete and couldn't find anything that gave me full confidence that it wouldn't hurt the bike. Thank you I appreciate it. Btw like the videos so far I'll definitely keep my eye out for whenever you upload.

  • @TheoreticallyAnEngineer
    @TheoreticallyAnEngineer Рік тому

    Did you have to adjust the carburetor for the slip on?

  • @jamesnielsen2243
    @jamesnielsen2243 Рік тому

    I was wondering, what mufflers did you use?

  • @dennisbanks706
    @dennisbanks706 10 місяців тому

    Cafe that thing out buddy.

    • @BadAssEngineering
      @BadAssEngineering  10 місяців тому +1

      Those are for wannabes who want to look cool but don't know how to ride fast or far

  • @garrettkane31
    @garrettkane31 Рік тому

    Who makes the exhaust/mufflers?

  • @rayb8732
    @rayb8732 3 місяці тому

    Where'd you buy the exhausts?

    • @BadAssEngineering
      @BadAssEngineering  3 місяці тому +1

      eBay 💀💀

    • @rayb8732
      @rayb8732 3 місяці тому

      Thanks and what kind of exhausts are those buddy?

    • @BadAssEngineering
      @BadAssEngineering  3 місяці тому

      @@rayb8732 generic Chinese mufflers, these don't have a name or model