Seal Your CAN-AM Trunk & Air Box: How to Waterproof Your ATV! 2023 Outlander 1000 XMR
Вставка
- Опубліковано 1 сер 2024
- In this informative video, we will show you step-by-step how to properly seal the trunk and air box on your Can-Am ATV to ensure maximum waterproof protection. Whether you are an off-road enthusiast or simply want to safeguard your ATV against water damage, this comprehensive guide is a must-watch!
Use code JOR10 for a 10% discount site wide at afraidknotropes.square.site
I came across the company Afraid Knot Ropes at the Toronto ATV and Powersports show and was very impressed with their products. These seals are available for your Can-Am Outlander or Renegade.
The gaskets they sell for the trunk and air box have proven to be much better than stock and have kept all water out thus far. Afraid Knot Ropes is a Canadian company and their products are made in Canada.
If you're interested in purchasing either the trunk or airbag gaskets, or any ropes, soft shackles or recovery gear, head over to their website and use code JOR10 to receive a 10% discount site wide!
afraidknotropes.square.site
Thanks for watching! - Авто та транспорт
Don’t forget to use code JOR10 for 10% off!
I’ve been on a couple rides since installing the seals and they’ve worked perfectly so far! Very impressed!
Best seals you can buy! I have both as well!
Nice! Yeah they’ve been awesome!
I got those seals too, not sure if it was from Afraid Knot. That air box seal is going to cause things to break. The way your ratchet was stuck when you showed it on camera, I wouldn’t be surprised if you didn’t damage that hex on the cover. Eventually the hex will twist off or the locking tabs on the cover or air box will shear off.
No damage. I’ve had it on and off a few times since installing and it’s much easier now that the seal is broken in. It’s definitely tight when first installed. Next time I would do as Afraid Knot suggested and put a little dielectric grease around the seal to help it go on easier.
@@johnsoff-road The first time l installed mine l thougth l was going to twist it off, I think given enough time, someting will give.
Ours are thicker and softer then the OMC.
We took all the negative comments from the omc brand and worked to solve them. One of the main issues is the top corners and we solved that.
Some dielectric grease on the air box lid help with instal as well.
I was thinking about a bit of grease after I installed it. I’ll try that next time I take it off.
65$ for just a seal is a deal breaker. 20$ would be better for that 5$ piece of rubber.
@@TechnoLDud hey thanks for your comment.
It’s actually not rubber it’s a silicone sponge which is a much more costly material. Our prices are less than the other brand and we offer free shipping in Canada so our prices are much lower.
What a shame , we spend so much for a machine and parts of it are subject to the elements. Where do they think we ride them ? Around the Mall ? LoL , check out my series and let me know what you think .
I agree! Such simple things could have been done better from the start.
I bought both the trunk seal and air box seal. First ride water was filled in the rear box didn't even want to try using the airbox seal after testing the rear box seal
Really?! That’s very surprising. I’ve been in water over my rear rack and haven’t had a drop inside. Even my water test under pressure didn’t let any in. Are you sure you closed the trunk tight?? It’s really hard to close tight when the seal is new as you could see in my video. Something doesn’t seem right.
@@johnsoff-road yeah I was going to order another one, no telling how long the seal set on a shelf. I know what you mean about making sure it's shut all the way it definitely takes a little elbow grease
Actually I think I bought the ones on Amazon and not the one you show in this video now that I think about it. I will order from the company you recommended and see. I know I paid $70 plus shipping for the trunk and airbox seal@@johnsoff-road
Ohh ok. Well if you buy these ones use JOR10 and save some cash!
Will do I saved the video
Website will not let me order
Really? That’s odd. Reach out to Ian and I’m sure he’ll be able to get things fixed for you fast.
Hey sorry for the inconvenience we are having payment processing issues.
Please contact us and we can get you sorted out.