Cab Air Bag Replacement on a Peterbilt
Вставка
- Опубліковано 7 вер 2024
- How to replace your cab air bags on a Peterbilt. Many trucks are the same as this but we will show you how to do it with only a pair of pliers and vise grips.
Thanks for watching ! I truly appreciate each view that I get on each and every video. For those that leave a comment, I always try to reply but there’s so many video I may miss one every now and then, but thanks for taking the time to leave a comment, I really appreciate that especially as busy as we all are !
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime ! If you like my content be sure to hit that “Bell” and it will notify you when I have a new video come out.
Be sure to join in on our normal weekly livestream on Sunday Mornings between 8-9 AM C.S.T. It’s a blast and you never know what we will end up talking about. There’s usually a good many people in there and it’s like old buddies hanging out shooting the breeze ! It will give you a chance to meet some of the awesome people in our Tool / Fix It community ! We have some truly amazing guys and gals in our community and we are truly blessed !
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow me on Instagram: KoonTrucking
Check out www.vampiretools.com and use the Coupon Code: KOON15 for a 15% discount off your entire order plus get free shipping to anywhere in the Continental U.S.
Be watching for upcoming videos as we put these Vampire Tools to the test !
Thanks!
Thank you!
Nice I need to replace it in my 2001 387 Peter
Look s like no fun but need to get it going
Happy trucking
One of the tricks a good tow truck driver told me a while back was to install a 1/4" Quick Connect air fitting on the air tank under the drivers seat with a petcock valve on it. That way, you can moisture purge that tank in a second and also fill up the system by installing an air hose without having to start the truck. I do this at home all the time..
Nice work. I like to use a scissor jack from a car, you know the one that everyone hates, use it between frame and sleeper to support and raise or lower. Good video guys!
Good point, going to pull mine out and use it
Keep up the good work 🎉
The air ride cab will definitely save your back if it's working and don't have bad bags. Great video brother!
Well, That looked pretty easy. The air bag on my Mack dry rotted last summer. It is between two metal brackets. Super Stupid design. Not open like your truck. I forget how long it took. But it was several hours. I was so nervous that I was going to rip the new air bag ! I think I might try to make a super size valve spring compressor. Like the small engine flathead motors. That would make sliding the new air bag in a lot easier. Plus safer. Always enjoy your advice. You do not seem arrogant like some UA-cam people. I really enjoy all the information you put out. Thank You !!!
I've done this job on older trucks that get run off road....a little bit messy. Bill made it look easy.👍
You and Bill know all my tricks lol. Only I use a small bottle jack instead of the block if I can. That way I can always jack it up if I need a little extra room. Good job Mr Koon . Always enjoy your videos and live streams
nice smooth and easy job...if only they were all like that.
Great job Clay !!
good job Bill n Clay
It's hard to believe how much air those bags hold...You guys make it look easy...Guess what my mailman dropped off???Love the hat and the 2 in 1 pocket screwdriver...It will come in handy...Going to get some scotch guard and seal the signatures on the hat and wear the heck out of it...Have a great day...
Mike Brown Ohio haha wear that bad boy ! I just happen to know where some more of them are ! Glad you liked it !! Thanks for your support ! Guys like you is what makes it worth it !! I truly appreciate it
Great video Clay.
Great video. I learned a lot. Thanks
Clay that king of the road pete your working on
379 long nose lover here
Great job im glad to know you all are good on working on your own equipment , awesome !####
TruckerRochelle- RachelRolandaHarrisBoyd got an open truck ...... just saying
Good ole cab airbags, always fun time, although replacing them on the cng might have to be vid on its own because back tanks lol. Liked the vice grip trick clay thankyou for tip!
Great job brother keep up the great work see you in the next video thanks
Good job. Thanks!
Be sure to subscribe and take a look at my playlist “truck fixing” it has a bunch of great videos to save you some cash
Thanks I was wondering about the air line I used a scissor jack but I got er doneeeeee
What’s the part number for this? Thanks for the video.
Great video. I see there were no M tools harmed or offended in the making of this video. Lol
WHAT ABOUT THE DUAL PASSENGEF AND WHEEL AIRBAGW?
I see that aluminum Snap-on light. It’d probably hold it up. 😂
Nope
One side of the rear of my sleepers higher than the other. There's about a two and a half inch difference. So it makes my truck look like it's leaning. How would I level that off
Good deal 👌🏽💯✔💪🏽
Gonna have to tell bill to slow down a little bit just cause he’s on video doesn’t mean he has to work fast good job though
Phil D12 haha he’s camera shy so he gets in a hurry !
that was easy
You didn't show nothing
Showed exactly what was described. That’s how they are replaced, if there was something left out that you can’t figure out, then I would highly recommend you not work on anything on your own.
Am I the only guy that doesn't have quick connect air lines on their truck? Lol
Be thankful ! They suck ! I hate them. When ours start leaking especially on airbags and labeling valves we replace them with compression fittings !
I have a 99 model 379 and I buy my airbags at Truck Pro. The last one I bought was not quick connect. I hate quick connect.
cevans097 yeah I’m not a fan of them either. It isn’t if they leak it’s when and how bad !
Koon Trucking to be honest I didn't realize quick connect existed. I am sort of sick of screwing around with new ferouls etc but they do seal
that's all he had to do is jack the cab up from the ground didn't need to cut on in off truck