you're quite correct that it's more sensible to replace these movements than to repair them, but it should be pointed out that if you have the expertise to disassemble and make sure it's properly cleaned and lubricated then it's very likely you will have a much better movement than the one that left the factory. thanks again for showing people how to work on these cheap watches
Thank you for a superb video. You have a gift for sharing your passion with your viewers. I call it a passion because I take much more satisfaction from repairing something broken and making it useful again than having something shiny and new. If I may offer a tip though; before you removed the hands, it might have been a good idea to hold the movement sideways, reinsert the crown/stem and slowly turn the hands through one 12-hour cycle and determine if they may have been interfering or dragging against each other at some point. I have occasionally observed a perfectly strong-running movement stopped in such a manner. After remounting the hands it exhibited no trouble at all. Thanks again for making informative videos that are easy to understand. My favorite video of yours will always be the next one.
I have a phylida watch with this movement as a beater watch it was running 19+seconds a day I put it on timegrapher got it down to +2 seconds a day beat error 0.1ms amplitude 277 I know it's far from the best movement but it does the job I've owned it 3 years it was around £60 off aliexpress.
+1 subscrided! For me your video was crucial, extremely important, very well done, I needed a tutorial on how to do it myself to disassemble a Mingzhu movement! Very glad, god bless you and don't listen to some idiots who criticize you for being "amateur"... You are at least sharing your knowledge, something that "professionals" don't do!
Thanks for this vid. I just started tinkering with watches myself. I have a watch that has this movement too, it's working fine for now, but it's nice to see how to replace the movement if I have to. How do you change the date wheel out?
What are the weak points of these watches that make them less reliable? Would like to hear from your experience… can the company improve something to fix the issues and make these movements reliable and robust?
Does this dg3804 allow you to set the gmt hand independently from the hour/minute hands? Im trying to replace the movement in my pd-1662 and cant find a dg5833gmt which pd say is in it. Not sure what the differences are. Ideally, id buy something better movement wise if there was something.
Yes you can set the gmt hand independently and in my opinion in this PD1662 is DG3804 this DG5833 intent of a hand showing GMT has an additional dial with 24h
what I like in your videos, that you are a passionate person and offers a lot of information about the world of watches precede the type or price of the product NO MARKITING. i'd be very curious what do you think or if you have any videos talking about myota 8 movement
It can be done, you need only the right size, and the old one is only glued. Not planing such video in near future but I will think about it. Anyway it is not very difficult.
Hi,i see you remove the stem in hacking position.is this right?because i removed the stem in winding position, and reassamble in the winding position. But many times i have the problem when i install the stem that not arrestet and then i must open the movement to reset the keyless work.
I'm an amateur, I removed the rod when it was all pulled out, when I went to replace it, it didn't fit, it kept popping out, I managed to put it in place but I can't adjust it anymore hands 🥺
what movements can use if I wanted to improve my watch? I got a GMT bliger with a 39mm case and the DG3804, it was sold as having a NH34. Is that an option to replace without changing anything else? I read some changed it for a Miyota which is cheaper?
@@tickingWATCH I bought it because I don't have a GMT and I wanted to have one, so is important to have it. I think the DG3804 is going to work for a while, and they are cheap, I should just buy one for one the one I get dies or get it when it dies. Do you think in 5 years I would still be able to get that movement? they are like 25 dollars.
YES, the hour and minute hands are the same ..... but the second hand has a male female swop !! ....... they really should produce bi-sexual second hands :)
I got my first GMT last year, a Parnis sterile "batman" and whilst I have no clue what the extra hand is supposed to do really, it has been a solid solid piece the only thing I plan to do is to change the bracelet from a Parnis to a Pagani Design one as theirs are better esp on the end links which sink on the Parnis being not solid ones.
@@sahlandiwahoh5070 I'm rookie in watch match, but I'll try help you. Mingzhu 2813, is a chinese movt that "copy" Myiota 8215... It cames in some Parnis (PA2015 - if I'm not wrong), and I think it equipped some Bliger's. The main difference Mingzhu 2813 from Mingzhu 3804, is that 3804 have the GMT complication... If someone could put some more information, I aprecciate. Tks
@@MrMunizguilherme it is like you say. Also they are build in different companies and so they have different quality, some are quite good but some ... Thanks. Life
Ten zegarek kupiłem na aukcji ebay, jest no name więc raczej słaby zakup chociaż za 50$ nie liczyłem na dużo, jak coś koperta z bransoletą jest do ponownego wykorzystania. słyszałem że te z oficjalnego sklepu są jakościowo o wiele lepsze, ale też i droższe.
Sklep na Ali " Parnis official store" ma jeszcze w miarę akceptowalne ceny. Pytanie tylko czy to faktycznie oficjalny sklep Parnisa, czy jakiś Chińczyk tak sobie nazwał sklep? Oficjalny sklep parnis.org na stronie www ma dwa razy wyższe ceny. Straszą też w dziale FAQ że zegarki sprzedawane przez online'owych resellerów są dużo gorszej jakości. Że mechanizmy nienasmarowane, że nie ma żadnej kontroli jakości, że szkiełko nieszafirowe, a nawet że obudowa nie jest ze stali nierdzewnej tylko jakiś ocynkowany stop, itd. Chociaż te dwa ostatnie to mało wiarygodne i pomyślałem sobie że to ich sposób na zniechęcenie do kupna od kogoś innego niż z ich sklepu. Ale Twój filmik mnie zmartwił. Faktycznie brak kontroli jakości.
@@mecedoformerlymarsellago728 sądzę że ten zegarek jest właśnie jak piszesz ktoś go poprostu złożył i sprzedał albo jakiś zwrot gwarancyjny. Miałem też inne i były ok. Film jest o konkretnym egzemplarzu. Jak już jest marka na zegarku to raczej już chyba ktoś zadał sobie trochę trudu i minimalna kontrola jakości była. Generalnie cena 100$ za "markowy" na pewno jest kusząca w porównaniu np z Seiko.
@@tickingWATCH Chińczycy nie bawią się w zwroty gwarancyjne w tym przedziale cenowym, wola oddać cześć kasy -to powszechna praktyka. Co do gorszej jakości to być może ktoś próbuje podrobić parnisa w końcu to już brand rozpoznawalny na świecie a nawet uznany. Prawdą jest to że mechanizmy są suche i czasem kiepsko złożone no ale hej! CCC w końcu na czymś muszą przyciąć..
@@Rzut-Oka Tak to chyba wygląda, w tej cenie niestety nie ma alternatywy, chyba że kwarcowy, potem to już tylko Swiss Made za 2000 - ... albo Japończyki
Przydałaby mi się ta klamra bransolety, to tak gdybyś wybrał pierwszą opcję ;) Mingzu to przypadkiem nie jest prawdziwa nazwa mechanizmu miyoty produkowanego gdzieś daleko w Chinach? Czy jest to coś innego niż miyota czy jakiś seagull? Do swojego większego loreo zamówiłem inne wskazowki i przydało by mi się ten klucz do dekla 😈 mój zegarmistrz otworzył to suwmiarką.. Ogólnie zainwestowales ostatnio w narzędzie jak widzę na filmach👍
Dzięki, widziłem też jak taką kopertę otwierano nożyczkami, można też przycisnąć jakimś dopasowanym krążkiem ale trzeba uważać żeby szkło nie pękło. Hobby jak na razie powolutku się rozwija, dzięki za stały udział w filmach
@@tickingWATCH no ten typ zamknięcia z rolka jest słaby a trochę mi szkoda 100zl na klucze do 3zegarkow, mam nadzieję że na Ali pojawi się jakaś chińska tania alternatywa.. nożyczki też dobry pomysł dzięki👍
@@wacoisking tu już chyba zależy jak mocno dekielek jest dokręcony, ale w większości przypadków sądzę że dałby radę, mocno przycisnąć i powinno, chociaż nigdy takiej nie używałem więc to tylko przypuszczenie
They never calibrate, I have one of this, I oil and calibrate it in timegrapher now with accurate timing +2sec per day almost complete 17 years without problem.
Very profesional .Neutral and professional.That' s the PROBLEM by all Chinese watches.: NO END QUALITY CONTROLL. Eaven by Chinese mouvementts the assembly it's a bad: the screws are not tired or tiered to much.The components are good.I wish you good luck!
Clarence how much experience do you have with failing watches? I have a few unserviced soviet ones and one only moves when I tap the jewel holding the escapement pivot. You really don't get it....
Co do składania mechanizmów opartych koncepcyjnie jest taka sztuczka którą odkryłem niedawno: Ośki wpadną znacznie latwiej jeśli najpierw założymy balans i wychwyt. Zupełnie inaczej niż w etach i niż wszyscy zegarmistrzowie będą radzić.
All those watchmaker tools you need to perform your own service cost more than several of this watch and more than a good service on a professional watchmaker... so... trash is the best way indeed
If this is "work" for you, you are correct, and you always risk that the watch ends up junk. If you are not satisfied by "playing" with the watch as a learning adventure, you should not do it and not spend the money on tools. However, if you look around, basic watchmaking tools for a full mechanical service can be bought for a total of less than 150 dollars for sure, LESS than 40 for a basic set to service quartz watches. A rudimentary timegrapher costs nothing, because you can measure beat error and time-drift with free smart phone apps, instead of buying a 100 dollar timegrapher :) The app that I use and has been tried and recommended by most is called "Watch Accuracy Meter". Especially for quartz watches I strongly recommend you have a basic tool kit! You will never throw away another quartz watch, because it is "dead", when most of the time just the battery is depleted! I already have a few tool kits for making my own battery changes safely. Just those 30 or 40 dollars for battery changes (batteries costs less than a dollar a piece) paid for it self almost as soon as I received the tools! The "naked" cost (no tax, no shipping) was about 15 dollars each for a basic watchmaker tool kit and a table-top vice press with fitted inserts to press cases-backs on safely, without using a hammer! When you look past pretty fashion watches (NOT worth spending more than USD 20 on one, if not water-proof to at least 50 meters), one good watch costs between 50 and 200 dollars! In the past, I broke a few watches forcing lids back on, so I bought proper tools, like a vice-press with sizeable inserts. They were absolutely worth it, saving shop-costs every year for each quartz watch! I am also going to buy more tools, like a hand puller/presser for only 12 bucks! Then I can buy a cheap movement and recover a couple of old Citizen watches that were very expensive 40 years ago! Just the pleasure of doing the hobby is worth it, like building a model railway, etc. I also have about 17 quartz watches left after breaking a few without good tools for changing batteries, PLUS my 95 year old Momsy's 20 or so, so the basic tools were WELL worth it, with a battery change at a watchmaker often costing more than the watch, IF you can find a trustworthy watchmaker, which is difficult in USA!
I wear a loreo sub as a beater at work and I work in a warehouse which is pretty brutal on it with a lot of quick accelerations on it and its surprisingly good imo and keeps fine time
All videos of this series ua-cam.com/video/ZW1oKl2kcFw/v-deo.html
Hola! Este movimiento es igual que el
DG 5833gmt?
As a non-native English speaker I think your English is just fine!
Thanks ☺
I agree!
I bet it's way better than my Polish... 🙃
you're quite correct that it's more sensible to replace these movements than to repair them, but it should be pointed out that if you have the expertise to disassemble and make sure it's properly cleaned and lubricated then it's very likely you will have a much better movement than the one that left the factory. thanks again for showing people how to work on these cheap watches
Thanks, I really appreciate it
Thank you for a superb video. You have a gift for sharing your passion with your viewers. I call it a passion because I take much more satisfaction from repairing something broken and making it useful again than having something shiny and new.
If I may offer a tip though; before you removed the hands, it might have been a good idea to hold the movement sideways, reinsert the crown/stem and slowly turn the hands through one 12-hour cycle and determine if they may have been interfering or dragging against each other at some point. I have occasionally observed a perfectly strong-running movement stopped in such a manner. After remounting the hands it exhibited no trouble at all.
Thanks again for making informative videos that are easy to understand. My favorite video of yours will always be the next one.
You English pronunciation is good and easy to understand.
Thank you 😊
Agree. I find your explanations useful and easy to follow.
I have a phylida watch with this movement as a beater watch it was running 19+seconds a day I put it on timegrapher got it down to +2 seconds a day beat error 0.1ms amplitude 277 I know it's far from the best movement but it does the job I've owned it 3 years it was around £60 off aliexpress.
It seems it was a very good purchase, congratulations 😀 and thanks for sharing.
+1 subscrided! For me your video was crucial, extremely important, very well done, I needed a tutorial on how to do it myself to disassemble a Mingzhu movement! Very glad, god bless you and
don't listen to some idiots who criticize you for being "amateur"... You are at least sharing your knowledge, something that "professionals" don't do!
Thanks, I really appreciate it and good luck with yours 😀
Thanks for this vid. I just started tinkering with watches myself. I have a watch that has this movement too, it's working fine for now, but it's nice to see how to replace the movement if I have to. How do you change the date wheel out?
Here you might find the right answer ua-cam.com/video/gY4_u24Ub4Q/v-deo.html or here ua-cam.com/video/DjRM-zfby3Q/v-deo.html
Was it helpful ???
Hi!!! congratulation for you fantastic job!
Is there any better movement to replace the GMT 3804? From a brand like sellita, seiko, miyota etc.
Sellita has movement with GMT but than you have to replace dial and hands. 😀
Your English is very good!! Better than most English 👍 thanks for the videos.
I'm really glad that you like it THANKS
What are the weak points of these watches that make them less reliable? Would like to hear from your experience… can the company improve something to fix the issues and make these movements reliable and robust?
Parts are very thin, probably assembled by machines and therefore this movements are less suitable for manual service.
cordial greeting, I have a watch with this dg3804 movement I want to change it for a better movement, which one could I replace it with?
Thank you 😀. Miyota 8215/8205
Does this dg3804 allow you to set the gmt hand independently from the hour/minute hands?
Im trying to replace the movement in my pd-1662 and cant find a dg5833gmt which pd say is in it. Not sure what the differences are. Ideally, id buy something better movement wise if there was something.
Yes you can set the gmt hand independently and in my opinion in this PD1662 is DG3804 this DG5833 intent of a hand showing GMT has an additional dial with 24h
@@tickingWATCH thanks but i wondered if the pd1662 had a dg5833 with the 24 hour wheel removed and a gmt hand put there instead?
@@Watches_Anonymous to know that. you need to disassemble it but rather not 👍
I also intend to make the same exchange. Did you manage to change the caliper? Wouldn't an NH34GMT be better?
what I like in your videos, that you are a passionate person and offers a lot of information about the world of watches precede the type or price of the product NO MARKITING.
i'd be very curious what do you think or if you have any videos talking about myota 8 movement
I'm really glad that hear that. Do you mean maybe this movement ua-cam.com/video/gY4_u24Ub4Q/v-deo.html
Nice video, so the movement looks good, but the assembly was bad. Very informative.
😀 Thanks
Hey, if you wanted to change the colour of the bezel can you pop the insert off on these? Do a video please!!!
It can be done, you need only the right size, and the old one is only glued. Not planing such video in near future but I will think about it. Anyway it is not very difficult.
@@tickingWATCH sweet thanks buddy
You're english is better then many Americans.
😀 thanks !!!
Hello, in what position can i remove the stem of the DG3804 movement? Widding or Setting position? Thank you
Actually it doesn't matter, normally there shouldn't be any problems.
Hi,i see you remove the stem in hacking position.is this right?because i removed the stem in winding position, and reassamble in the winding position. But many times i have the problem when i install the stem that not arrestet and then i must open the movement to reset the keyless work.
Actually there should not be any difference but from time to time there are models that makes problems with that.
I'm an amateur, I removed the rod when it was all pulled out, when I went to replace it, it didn't fit, it kept popping out, I managed to put it in place but I can't adjust it anymore hands 🥺
Do you know what size dial this movement uses? I want to make some modifications to my watch and I’m wondering where I can find an aftermarket dial
28.5-29,0 mm was having my watchcase
How long is the power reserve this movement?
The power reserve is quite ok, at about 40h.
what movements can use if I wanted to improve my watch? I got a GMT bliger with a 39mm case and the DG3804, it was sold as having a NH34. Is that an option to replace without changing anything else? I read some changed it for a Miyota which is cheaper?
In my opinion Miyota would be here the best, but io does not have GMT
@@tickingWATCH I bought it because I don't have a GMT and I wanted to have one, so is important to have it. I think the DG3804 is going to work for a while, and they are cheap, I should just buy one for one the one I get dies or get it when it dies. Do you think in 5 years I would still be able to get that movement? they are like 25 dollars.
@@mikelboudica5389 hard to say, they change there quite a lot, but the most important is that dial and hands fit to the movement
I have exactly the same problem, the second hand always stops at 55 secs ......
Probably somewhere hooks, needs service 😀
Maybe the second hand is touching the crystal. Try removing the crystal and see if it works better
Unfortunately it wasn't ...... the watch now has an NH35A movemnt!!
@@davidmanze7563 Did fit the hands or you have to buy a new set dedicated NH35
YES, the hour and minute hands are the same ..... but the second hand has a male female swop !! ....... they really should produce bi-sexual second hands :)
You have to stop the balance. And when you take it with the needle, pull out two at 12 o'clock.
Thanks for your advice I really appreciate it 👍
I got my first GMT last year, a Parnis sterile "batman" and whilst I have no clue what the extra hand is supposed to do really, it has been a solid solid piece the only thing I plan to do is to change the bracelet from a Parnis to a Pagani Design one as theirs are better esp on the end links which sink on the Parnis being not solid ones.
The extra hand reads a time from the second time zone. It should be adjustable. Good luck with your watch 😀
I learned a lot from your video to explain the breakdown.
I'm really glad that you like it and I could help 😀
do you know which is the difference between the DG3804 and the newest dg3804-3? or 3804b?
Hi, in general, there is no difference, only there are some additional complications 😀
I was about to buy my Bliger coke gmt 43 mm but its just 3804 not DG3804 mingzhu or are they the same
Rather the same, but some are quite good some pieces not the best, depends on what you get. The quality of the movement varies.
@@tickingWATCH thx for the reply. Im going to pull the trigger on a Coke 43mm gmt
Great Job wspaniale video tylko tak dalej.
Fajnie, że się podoba, dzięki :)
Is their another part to the video what was the final result?
Yes, see playlist and links in the description down below 😀 thanks
Very good video, I do a lot of those myself..
Thanks, I really appreciate it
The best Chinese automatic movements are from Seagull
100% agree with you 😀
What about 2813?
@@sahlandiwahoh5070 I'm rookie in watch match, but I'll try help you. Mingzhu 2813, is a chinese movt that "copy" Myiota 8215... It cames in some Parnis (PA2015 - if I'm not wrong), and I think it equipped some Bliger's. The main difference Mingzhu 2813 from Mingzhu 3804, is that 3804 have the GMT complication... If someone could put some more information, I aprecciate. Tks
@@MrMunizguilherme it is like you say. Also they are build in different companies and so they have different quality, some are quite good but some ... Thanks. Life
Seba, a tego Parnisa to kupiłeś na Ali w oficjalnym sklepie "
Parnis official store"? Czy od kogoś innego?
Ten zegarek kupiłem na aukcji ebay, jest no name więc raczej słaby zakup chociaż za 50$ nie liczyłem na dużo, jak coś koperta z bransoletą jest do ponownego wykorzystania. słyszałem że te z oficjalnego sklepu są jakościowo o wiele lepsze, ale też i droższe.
Sklep na Ali "
Parnis official store" ma jeszcze w miarę akceptowalne ceny. Pytanie tylko czy to faktycznie oficjalny sklep Parnisa, czy jakiś Chińczyk tak sobie nazwał sklep? Oficjalny sklep parnis.org na stronie www ma dwa razy wyższe ceny. Straszą też w dziale FAQ że zegarki sprzedawane przez online'owych resellerów są dużo gorszej jakości. Że mechanizmy nienasmarowane, że nie ma żadnej kontroli jakości, że szkiełko nieszafirowe, a nawet że obudowa nie jest ze stali nierdzewnej tylko jakiś ocynkowany stop, itd. Chociaż te dwa ostatnie to mało wiarygodne i pomyślałem sobie że to ich sposób na zniechęcenie do kupna od kogoś innego niż z ich sklepu. Ale Twój filmik mnie zmartwił. Faktycznie brak kontroli jakości.
@@mecedoformerlymarsellago728 sądzę że ten zegarek jest właśnie jak piszesz ktoś go poprostu złożył i sprzedał albo jakiś zwrot gwarancyjny. Miałem też inne i były ok. Film jest o konkretnym egzemplarzu. Jak już jest marka na zegarku to raczej już chyba ktoś zadał sobie trochę trudu i minimalna kontrola jakości była. Generalnie cena 100$ za "markowy" na pewno jest kusząca w porównaniu np z Seiko.
@@tickingWATCH Chińczycy nie bawią się w zwroty gwarancyjne w tym przedziale cenowym, wola oddać cześć kasy -to powszechna praktyka.
Co do gorszej jakości to być może ktoś próbuje podrobić parnisa w końcu to już brand rozpoznawalny na świecie a nawet uznany. Prawdą jest to że mechanizmy są suche i czasem kiepsko złożone no ale hej! CCC w końcu na czymś muszą przyciąć..
@@Rzut-Oka Tak to chyba wygląda, w tej cenie niestety nie ma alternatywy, chyba że kwarcowy, potem to już tylko Swiss Made za 2000 - ... albo Japończyki
That is the thing I hate about all the beautiful cheap watches I bought; how long will it function before it stops.
We have to take this into account when we decide to buy a one
ciekawy film
dzięki 👍
Przydałaby mi się ta klamra bransolety, to tak gdybyś wybrał pierwszą opcję ;)
Mingzu to przypadkiem nie jest prawdziwa nazwa mechanizmu miyoty produkowanego gdzieś daleko w Chinach? Czy jest to coś innego niż miyota czy jakiś seagull?
Do swojego większego loreo zamówiłem inne wskazowki i przydało by mi się ten klucz do dekla 😈 mój zegarmistrz otworzył to suwmiarką..
Ogólnie zainwestowales ostatnio w narzędzie jak widzę na filmach👍
Dzięki, widziłem też jak taką kopertę otwierano nożyczkami, można też przycisnąć jakimś dopasowanym krążkiem ale trzeba uważać żeby szkło nie pękło. Hobby jak na razie powolutku się rozwija, dzięki za stały udział w filmach
@@tickingWATCH no ten typ zamknięcia z rolka jest słaby a trochę mi szkoda 100zl na klucze do 3zegarkow, mam nadzieję że na Ali pojawi się jakaś chińska tania alternatywa.. nożyczki też dobry pomysł dzięki👍
Piłka zegarmistrzowska by sobie nie poradziła?
@@wacoisking czekam na coś takiego z ali ale wątpię, one są mocno zakręcane..
@@wacoisking tu już chyba zależy jak mocno dekielek jest dokręcony, ale w większości przypadków sądzę że dałby radę, mocno przycisnąć i powinno, chociaż nigdy takiej nie używałem więc to tylko przypuszczenie
They never calibrate, I have one of this, I oil and calibrate it in timegrapher now with accurate timing +2sec per day almost complete 17 years without problem.
Thanks for your advice I really appreciate it
Hi mine 3 yrs and on timegrapher also 2+ seconds if it stops tomorrow it owes me nothing but I hope it continues to run for as long as yours
Hey man nice video. You spelled the word "Stopped" incorrectly.
Thanks, I really appreciate it and a direct tip is always better than a book 👍
Very profesional .Neutral and professional.That' s the PROBLEM by all Chinese watches.: NO END QUALITY CONTROLL. Eaven by Chinese mouvementts the assembly it's a bad: the screws are not tired or tiered to much.The components are good.I wish you good luck!
Thanks for your advice I really appreciate it
What is the lift angle of this movement anyone? Thanks
No information’s about that but it is probably the same like in Miyota 8215 so 49 degree, anyway 100% sure I’m not. 👍
@@tickingWATCH thanks. It probably is the same yes. 👍🙏
Very good video because i have that watch and I wanted to know how she walked
Thanks 😀
@@tickingWATCH No problems it was normal because you do a very video on you chanel
"she"?
@@johnholland2825 Sorry i am french and my english is not very good
@@narcos9733 - hello France, you're English is very good, hope you are well.
Veeeeeery careful.... it's 18 white gold ☝🏼 😁
haha anyway for training is always good to do your best 😀
What do u mean u shake it again and it stops 2 days after? The power reserve is just 40 hrs.... of course it will stop... lol
Yes, but the watch was fully winded, it was hacking somewhere. Anyway, after service works well 👍
you are genius Clarence
Clarence how much experience do you have with failing watches? I have a few unserviced soviet ones and one only moves when I tap the jewel holding the escapement pivot. You really don't get it....
Możesz kontynuować filmy po polońskuu
Na pewno większość filmów będzie po polsku
This is a good video but in my opinion the music is too much.
Thanks, I really appreciate it 👍
Co do składania mechanizmów opartych koncepcyjnie jest taka sztuczka którą odkryłem niedawno: Ośki wpadną znacznie latwiej jeśli najpierw założymy balans i wychwyt. Zupełnie inaczej niż w etach i niż wszyscy zegarmistrzowie będą radzić.
Dzięki rosomak za wskazówkę. Przy okazji kolejnego serwisu wypróbuję. Jakbyś miał jeszcze jakieś pomysły pisz śmiało 👍
All those watchmaker tools you need to perform your own service cost more than several of this watch and more than a good service on a professional watchmaker... so... trash is the best way indeed
a yah, when you would like to repair only one watch I fully agree with you 😀
If this is "work" for you, you are correct, and you always risk that the watch ends up junk. If you are not satisfied by "playing" with the watch as a learning adventure, you should not do it and not spend the money on tools.
However, if you look around, basic watchmaking tools for a full mechanical service can be bought for a total of less than 150 dollars for sure, LESS than 40 for a basic set to service quartz watches. A rudimentary timegrapher costs nothing, because you can measure beat error and time-drift with free smart phone apps, instead of buying a 100 dollar timegrapher :) The app that I use and has been tried and recommended by most is called "Watch Accuracy Meter".
Especially for quartz watches I strongly recommend you have a basic tool kit! You will never throw away another quartz watch, because it is "dead", when most of the time just the battery is depleted!
I already have a few tool kits for making my own battery changes safely. Just those 30 or 40 dollars for battery changes (batteries costs less than a dollar a piece) paid for it self almost as soon as I received the tools!
The "naked" cost (no tax, no shipping) was about 15 dollars each for a basic watchmaker tool kit and a table-top vice press with fitted inserts to press cases-backs on safely, without using a hammer! When you look past pretty fashion watches (NOT worth spending more than USD 20 on one, if not water-proof to at least 50 meters), one good watch costs between 50 and 200 dollars! In the past, I broke a few watches forcing lids back on, so I bought proper tools, like a vice-press with sizeable inserts. They were absolutely worth it, saving shop-costs every year for each quartz watch! I am also going to buy more tools, like a hand puller/presser for only 12 bucks! Then I can buy a cheap movement and recover a couple of old Citizen watches that were very expensive 40 years ago!
Just the pleasure of doing the hobby is worth it, like building a model railway, etc. I also have about 17 quartz watches left after breaking a few without good tools for changing batteries, PLUS my 95 year old Momsy's 20 or so, so the basic tools were WELL worth it, with a battery change at a watchmaker often costing more than the watch, IF you can find a trustworthy watchmaker, which is difficult in USA!
It's called a dial brother
Thanks 👍
so, what was wrong with it? dirty is not the answer
Actually manufacturing accuracy of the parts, see other parts of this episode ...
Yikes, those were some big bits of metal.
where indeed 😀
$50 bucks 5 months what more did you expect?
Could be better 😀
You get 40 YEARS for $20 soviet watches.
Too bad movement...
Unfortunately 😐
тугезер бикоз квикли чикен макнагетс
👍
Lose the music. It doesn't suit the subject.
😀
Seagull movements are garbage and keep terrible time.
😁
Not all.
Mine works great, seagull and mingzhou
I wear a loreo sub as a beater at work and I work in a warehouse which is pretty brutal on it with a lot of quick accelerations on it and its surprisingly good imo and keeps fine time
Loreo is seiko I believe built in japan or Malaysia😊
Great video. This guy speaks better english than the president of the USA, Donald Trump aka Spanky!
😀
Youa are Amateur !!
Thats right. Thanks 👍
This is a $25 garbage / dumpster watch.
😀 definitely not the best one for this price