I made it !!! thanks so much, the best video tutorial about this, i have this radio model and it' works but i need to burn a 80 minutes of silence to play music with an aux cable audio from mobile.
+jai Bhilwara it won't show any aux option just play sc and put the aux in aux jack and it play music in phone and it will overlap the cd sound it will mute cd sound and plays mobile sound
I have the same model which is shown in video; I tried it and it's really working. The only thing is that it is not working with blank CD , Its working with a Written CD parallaly. Thanks a Lot
Good thing you added the out of focus images of the circuit board, that helped me see how it connects to a silver blob, does it matter which one? I didn't thing so. I took the stereo and mounted in my garbage can and it works great. And by "works great" I mean that it doesn't work at all. Time to fix that air conditioner thingy. This is gonna be a piece of
in that case, check the connector (AUX cable and connectors should be tight enough ) if you still get the problem write a mute or absolute no volume soundtrack in repeated mode into a CD and name it AUX MODE whenever the muted track is playing you can hear AUX input only as the track has no sound you'll be able to hear AUX tracks with volume :)
hey I have same audio system in my car I want to install aux in it..... is there any other option to install it without opening it & damaging it n how does car audio system modules work........ reply as soon as possible.... thx
Can u please make a video on sony xr ca660x eq 3 cassette player bluetooth module adjusting Also can we remove the cassette system from it and only connect bluetooth usb auxilary in it. Please make a video on this
nope it should overlap i get this kinda problem only when the AUX cable is faulty .used a good cable with my phone .when song is played i got CD song overlapped by AUX input and AUX input is working fine ..try to change the cable and make sure you've followed the colour code while soldering
hey i have volkswagen vento 2012.which supports bluetooth and aux features.but car dont have any AUX ports or blutooth in it. so how to get AUX PORT IN MY CAR?
Hi! Just finished installing, wasn't hard. The thing is my CD player is not working, so it does not transmit audio from the aux either. Do you know any way I could bypass the CD player or how to identify directly from the FM transmitter? I tried searching but there's no Rch or Lch in the main board I could see. Thanks for your video!
Ivica Mihajlovic I believe it's muting your input which I'm assuming is a phone because of the controls that are on your phone going through the axillary when it receives certain signals it causes your phone to pause maybe adding a filter of sorts a diode going one way only down the line so that the phone does not get these returns signals
One CD has 80 min. capacity, so you can record empty audiofile on your PC with 80 min. lenght and then burn to CD. It pauses sound from AUX just for every 80 mins.
1. Follow the input of the right channel and the left channel and Gnd from the back of the cd driver and solder the wires to the recorder motherboard. 2. Remove the cd driver and cd flat drive. 3. Connect the pins 65-66 of IC number 1 with solder. entire. enjoy.
Burn a cd with one track concisting of only silence and play it on loop. This will trick the unit into operating, but the cd won't interfere with the aux as it has no actual audio on it
@@Life21channel which tone control/source selector ic this unit uses? philips tea series? .can we disconnect cd player input to source selector and directly connect aux to the source selector channel that takes cd input.we can add a few passive components(resistor/capacitor) for input with reference from datasheet.all these systems are i2c micro controlled if i am not wrong,so source selection is also via i2c.
Hi how are you can you make a video on converting cd changer in put.for aux I have a cd and tape player but cd changer broke it was in the middle console.thanks
Hi , I also have an esteem . Did this mod work ? Do you need to burn a silent cd ? what if the cd player shows an error , will the sound from aux input still play ?
Hi! Very helpful video I have Toyota Yaris 2010 model equipped with CASSETTE PLAYER TOYOTA 86120-52560. Can you please advise where to connect 3 wires of AUXILIARY cable?
it's difficult to trace out without any symbols or color codes try to find your model board on google most of the players have same universal language A.GROUND ,L ch, R ch.
Hello... I have done it in a pioneer audio system of a swift car... when I connect my phone my phone shows the signal as connected but music doesn't play as the system doesn't have the option... it has only FM n CD player... so what should I do... Please tell me..
Great video I did it & it worked. Question, when I have the silent CD in, & my phone attached there is a buzzing sound (not affected by volume controls) until I start playing content from the phone. Any ideas?
I believe the buzzing sound you are hearing actually is coming from your speakers trying to read media or just standing "ready" For when you play media. If it does not play through the music you are playing you should be fine. The same thing happens with my Bluetooth earbuds when I am not playing music but am connected. You also could have bad solders on the motherboard. If the white noise doesn't bleed through the music and is not affected by volumetric controller you should be fine.
Bro I had aux port (Sony x plod ,drive-s ll multi disc player mex- DV1000) don't have USB can connect pen drive , I find aux to USB cable but not working ...any suggestions or ideas though I connect pen drive ... thanks
Sir mere pas panasonic ka ek car audio cd player hai... sir is player k samne jo display pannel hota hai uska pin configuration bata sakte hai... kon sa pin supply hai aur kon kon pin output hai...please sir help kare...
! same as my stereo ! i did it and it's worked *BUT* first put a an CD in the stereo you have to set the stereo to stand by (ST:BY) Then Connect the aux and play something go back to change Stand by to CD and you will hear the aux input I Think if got sort of aux booster/amplifier maybe it's will work without using CD .i will give it a try problem : when the song ends you have to repeat that . . .
you can buy a new cheap radio that has blue tooth and you can connect your phone to it some still have aux inputs (some times there on the back of radio) some radios are only $20 , before you ask look online
@@Life21channel so the cd should be sliced, not blank and when a cd with music is inserted it starts playing normally and then it just plugs into the AUX and covers that sound with the cd Right? do you have fb or instagram to let me know I am reading you about LCH, RCH, GND channels
Search and download the "service manual" (not the user manual) of your player, it contains the diagrams, then you should be able to find the relevant chip and identify the 3 pins. I found mine, I have an old Pioneer 2800.
There should be op-amps and digital converters on the board. Google the numbers printed on them to find which pins are audio out. Reverse engineering is tedious, but it works.
@@Life21channel The CD player of my Kenwood KDC MP4026V is also not working , showing some error code like E-05 ... will it work if I connect there like this ?
sorry the basic thumb rule is to find the Rch Lch Agnd and bypass them with Aux connections to overlap and mute the cd audio track works with any player if you find those connection points
+Vinay Patel just play the CD/DVD (Keep DVD/CD track playing)Mode and connect the AUX cable and play the song in mobile..now the audio from the AUX source will take over the CD and you'll listen the AUX source (AUX overlaps CD songs)
Life21 Channel how the volume controller works?? i mean streo player volume controller works or not?? and if i connect my mobile through aux so how can i manage the volume of mobile and streo player???
+Vinay Patel everything works just normal as AUX in other cars ..in the player i made DIY AUX I can control volume in player and also in mobile individually.. it's nothing gonna do with volume control we're just by passing the audio signals
Sir please help me with connection of aux or blutooth for pioneer KEH-1905 model car stereo. I can share you the circuit diagram Which i downloaded fron google
Can I do the same with a car audio that has usb port , if yes..how do I do the wiring of left channel , right channel and ground with the usb female port or in the board ?
Hi, what if you don't have a cd or cassette player? My Sony DSX-A400BT doesn't have one. And I want to have a USB port on the backside of the radio to add an hhard disk unit. D'you know any trick?
In my sterio there is no cd selection, so to play aux audio how can i select mode. Cd mode is getting activated only when i put cd in. This time the audio output from my phone is getting disconnected and phone starting playing audio through its speaker
this method only overlaps the audio output from the CD / cassatte audio source if you've followed the instructions and connected proper connections on board ..try changing AUX cable of your phone and try with different phones sometimes faulty cables can stop
Alternatively, try to google a pcb wiring diagram for your particular stereo. The left/right channels may have a different code on your unit. They should be close to each other anyway. Hope that helps.
Hi sir i have tried but its giving TOC error . Please help me how to remove this error . Also let me know how to select AUX input.? Even i have tried with blank CD also its giving same error
No for me it overlaps with the audio signals from the CD in CD mode so there is no dedicated aux mode or any other options what it does is it simply overlaps with the audio from the CD so cd=aux
If I put mode CD and there is no cd it will switch automatically to radio, how it will work ? the CD will no longer work ? can you explain it more thanks
Bro my car CD player is showing Error 11 while putting the CD, so i am planing to attach Bluetooth module inside the stereo. My requirement is the module must work when i choose CD mode. please help me to find the power in put to the CD drive from the ribbon wire connected to the drive.
I have a kenwood kdc mp625. I do not have anything near the cd ribbon port labeled LCH or RCH. Nothing on the board with rch or lch either. Any other suggestions to find these channels on this board? I'm sad lol. This is such a cool mod I never imagined would be possible.
@@infernocreations9481 Look for "service manual" (not user manual) of your player, since it is a major brand, it should be available somewhere, it contains the sheets and diagrams. I found mine I have an old Pioneer 2800 .
I haven't seen alpine model but the procedure is same for many models you need to find those AGND LCH RCH pins and connect the aux in and play in cd mode
At the end of the video, "if you have any doubts please leave a comment" what a click bait, knowing, alot are gonna comment about not giving a preview of sound
I made it !!! thanks so much, the best video tutorial about this, i have this radio model and it' works but i need to burn a 80 minutes of silence to play music with an aux cable audio from mobile.
that's great please like this video share and subscribe :)
Tony Cobain can you explain me how show it aux options
+jai Bhilwara it won't show any aux option just play sc and put the aux in aux jack and it play music in phone and it will overlap the cd sound it will mute cd sound and plays mobile sound
I have the same model which is shown in video; I tried it and it's really working. The only thing is that it is not working with blank CD , Its working with a Written CD parallaly. Thanks a Lot
Mandar Parkhi How to convert jvc players into usb model kdg334
Written cd means
Bhai mera bhi same model hai Kya ye sach mei kaam karta hai esa karne se?
Bhai kaam karta hain MP3 CD gaana write karo aur song play karo AUX input mein woh MP3 ko overlap karke AUX ko play karega
Good thing you added the out of focus images of the circuit board, that helped me see how it connects to a silver blob, does it matter which one? I didn't thing so. I took the stereo and mounted in my garbage can and it works great. And by "works great" I mean that it doesn't work at all. Time to fix that air conditioner thingy. This is gonna be a piece of
Thank you i have a old sony and i tried it and it worked! But i can hear the cd sound , maybe i have to put calm cd?
I am unable to find L,R,G how can i send u my motherboard image
You made gold out of nothing bro... Awsum
Thanks stay subscribed hit the bell icon
Tanku sir i ask the video my stereo is Kenwood the same stereo itried the work this is working to aux . Tanku sir 👌
thanks but the sound of stereo and aux both are mixing ????
in that case, check the connector (AUX cable and connectors should be tight enough ) if you still get the problem write a mute or absolute no volume soundtrack in repeated mode into a CD and name it AUX MODE whenever the muted track is playing you can hear AUX input only as the track has no sound you'll be able to hear AUX tracks with volume :)
hey I have same audio system in my car I want to install aux in it.....
is there any other option to install it without opening it & damaging it
n how does car audio system modules work........
reply as soon as possible....
thx
I've found this is the better way for older car stereos wich doesn't have CD exchanger port .
tnks very helfull have same stereo and was looking for this million tnks
Thank you my friend for your video , watched several videos your one is most useful and helpful !!!!
You're welcome :)
Can u please make a video on sony xr ca660x eq 3 cassette player bluetooth module adjusting
Also can we remove the cassette system from it and only connect bluetooth usb auxilary in it.
Please make a video on this
That was very helpfull. Thank you.
+Tirebywall you're welcome :)
after wiring the volume of player and aux overlaps. how can i resolve this.?
i mean the sound of stereo and aux both are mixing. how can i resolve this?
nope it should overlap i get this kinda problem only when the AUX cable is faulty .used a good cable with my phone .when song is played i got CD song overlapped by AUX input and AUX input is working fine ..try to change the cable and make sure you've followed the colour code while soldering
hey i have volkswagen vento 2012.which supports bluetooth and aux features.but car dont have any AUX ports or blutooth in it.
so how to get AUX PORT IN MY CAR?
check this www.team-bhp.com/forum/car-entertainment/147167-diy-rcd-510-head-unit-upgrade-vw-vento-polo.html
if cd player is not working then also aux works plz rply
If you have any error it may not work .
Hi! Just finished installing, wasn't hard. The thing is my CD player is not working, so it does not transmit audio from the aux either. Do you know any way I could bypass the CD player or how to identify directly from the FM transmitter? I tried searching but there's no Rch or Lch in the main board I could see. Thanks for your video!
Same with me bro...I try connect to radio amplifier also not working...any idea?
It not working connecting by cd player
I know some people did this using the FM Tuner, but sound quality was not as fine as CD player anyway
CAN you help with Kenwood minidisc have no minidisc
Is there a way to make this work without the CD actually being in the unit?
Every time the song is changing on CD, it pauses the sound from "AUX"
it won't work without the CD but you can write the long audio track in a timeline so that it won't change or pause like changing tracks in CD
Yeah. That's what I thought. Thanks anyway for this hack. Works good given that it's free :D
:D Cheers and do share like this video and subscribe this small act of kindness will help us to do more stuff
Ivica Mihajlovic I believe it's muting your input which I'm assuming is a phone because of the controls that are on your phone going through the axillary when it receives certain signals it causes your phone to pause maybe adding a filter of sorts a diode going one way only down the line so that the phone does not get these returns signals
One CD has 80 min. capacity, so you can record empty audiofile on your PC with 80 min. lenght and then burn to CD. It pauses sound from AUX just for every 80 mins.
Hey bro your idea is working thanks.. But i cannot find loud mod in this type of stereo can you help me
Excelente...si me funcionó.. gracias!!!!!
Well done, I hope you succeed in your career.
1. Follow the input of the right channel and the left channel and Gnd from the back of the cd driver and solder the wires to the recorder motherboard. 2. Remove the cd driver and cd flat drive. 3. Connect the pins 65-66 of IC number 1 with solder. entire. enjoy.
What is IC number 1?
Thix bhai , same amp . I apply same proceess and aux cable work., 🙏🙏🙏👍
Ho can i add bluetooth usb aux module to a sony xr ca660x eq 3 cassette player
I couldn't able to find right Chanel left channel and ground could you able to help
hi sir i have a sony component, pls,,, help me how to find the L- chanel or R-chanel to my cd component, thanks sir
i found this Sony board hope this might help you cheers : blog.koivistik.com/diy-aux-cable-for-an-old-car-stereo/
Alraedy put the aux cable, how do It work?
I have the same radio model and i want to do this
it works when you play the cd it overlaps the cd sound with AUX in put
If aux it playing and a cd is playing will both sounds come thru at the same time?
It supposed to over lap CD signals..check with different Aux cable
Burn a cd with one track concisting of only silence and play it on loop. This will trick the unit into operating, but the cd won't interfere with the aux as it has no actual audio on it
Yes.
@@Life21channel which tone control/source selector ic this unit uses? philips tea series? .can we disconnect cd player input to source selector and directly connect aux to the source selector channel that takes cd input.we can add a few passive components(resistor/capacitor) for input with reference from datasheet.all these systems are i2c micro controlled if i am not wrong,so source selection is also via i2c.
Hi how are you can you make a video on converting cd changer in put.for aux I have a cd and tape player but cd changer broke it was in the middle console.thanks
I have the same stereo in my Suzuki Esteem. Thank you this was a much needed tutorial.
Hi , I also have an esteem . Did this mod work ? Do you need to burn a silent cd ? what if the cd player shows an error , will the sound from aux input still play ?
Hi!
Very helpful video
I have Toyota Yaris 2010 model equipped with CASSETTE PLAYER TOYOTA 86120-52560. Can you please advise where to connect 3 wires of AUXILIARY cable?
could you take the stereo apart and tell me the names of the chips?
how is the volume control though can I still use the radio or do I have to use only my input source? is this Amplified?
volume can be controlled from your input device and player and yes you can use FM but AUX won't work in FM mode in player AUX works in CD mode
hey! how to find a channels if they are not marked like yours? i am new in electronics..
it's difficult to trace out without any symbols or color codes try to find your model board on google most of the players have same universal language A.GROUND ,L ch, R ch.
I have a 1997 honda prelude. Would this work for it?
I'm not sure if you can find L ch R ch A gnd like this you can give a try
Hello... I have done it in a pioneer audio system of a swift car... when I connect my phone my phone shows the signal as connected but music doesn't play as the system doesn't have the option... it has only FM n CD player... so what should I do... Please tell me..
R M Yes.. now it's alright I have reseted it... I just wanted the option in the display... got it
What type of solder did you use? Not the tool, but the metal? thanks
soldering wire ( soldering led google it it's normal soldering wire)
He used sholder...😂
Life21 Channel , it's a rosin-core solder. Typical used solder for pcb soldering.
Thanks I don't know it's name my brother was doing that soldering
Good day sir! How to put audio out from my old car stereo?
You may have rca outputs at the back of the stereo.
Great video I did it & it worked. Question, when I have the silent CD in, & my phone attached there is a buzzing sound (not affected by volume controls) until I start playing content from the phone. Any ideas?
I believe the buzzing sound you are hearing actually is coming from your speakers trying to read media or just standing "ready" For when you play media. If it does not play through the music you are playing you should be fine. The same thing happens with my Bluetooth earbuds when I am not playing music but am connected. You also could have bad solders on the motherboard. If the white noise doesn't bleed through the music and is not affected by volumetric controller you should be fine.
In which mode it will work because it is not working for my same model Kenwood car stereo?
Without playing the cd the cable is not working.......actually the aux input is playing by dominating the cd output. How to remedy this??
Burn a plain CD with only one silent 'song' on it
Can you please make S home sound system with my car player?
What's your address?
Hey there I did this aux hack with the Same brand stereo and its playing with the CD player same time how to fix it????!!!!help please
Bro I had aux port (Sony x plod ,drive-s ll multi disc player mex- DV1000) don't have USB can connect pen drive , I find aux to USB cable but not working ...any suggestions or ideas though I connect pen drive ... thanks
Sir mere pas panasonic ka ek car audio cd player hai...
sir is player k samne jo display pannel hota hai uska pin configuration bata sakte hai... kon sa pin supply hai aur kon kon pin output hai...please sir help kare...
! same as my stereo !
i did it and it's worked
*BUT*
first put a an CD in the stereo
you have to set the stereo to stand by (ST:BY)
Then Connect the aux and play something
go back to change Stand by to CD
and you will hear the aux input
I Think if got sort of aux booster/amplifier maybe it's will work without using CD .i will give it a try
problem : when the song ends you have to repeat that . . .
the acdent is killing me 😂
:D
CAN you help with Kenwood minidisc have no minidisc
hallaci visi what does that mean?
+TheRealDune can you help me how to add an aux in kenwood car stereo minidisc
+hallaci visi same process brother find the left right channel's and A ground on circuit board
you can buy a new cheap radio that has blue tooth and you can connect your phone to it some still have aux inputs (some times there on the back of radio) some radios are only $20 , before you ask look online
I like the music, great video man..!
Can we add Woofer or subwoofer in this music system ?? please reply 🙏
Yes. There are connectors at the back of the unit.
Is the volume control is there after this modification?
Yes.
Can cd changer through AUX IS POSSIBLE?
What ?
hi, one question regarding cd radio-lg lac3710r Can an aux be made and what cd should be put blank or?
put a audio cd it will overlap the audio from CD and plays from AUX .blank CD the player will show blank CD error
@@Life21channel so the cd should be sliced, not blank and when a cd with music is inserted it starts playing normally and then it just plugs into the AUX and covers that sound with the cd Right? do you have fb or instagram to let me know I am reading you about LCH, RCH, GND channels
Yes it overlaps CD music(audio) with AUX audio .you can Write to me hmnth2@gmail.com.
@@Life21channel i wrote you an email from miki47194@gmail.com
I'll check my email I haven't seen yet
Bro, i have a problem, mine are not labeled, how do i find left and right and grd
I’m having the same problem, did you find a solution?
@@Roboto2804 no solution, the labeling is necessary for you to find the right soldering points, i recommend you to buy a new one they're cheap
Looking at the model of the radio in sure they should have wiring diagrams from each.
Search and download the "service manual" (not the user manual) of your player, it contains the diagrams, then you should be able to find the relevant chip and identify the 3 pins.
I found mine, I have an old Pioneer 2800.
There should be op-amps and digital converters on the board. Google the numbers printed on them to find which pins are audio out. Reverse engineering is tedious, but it works.
Bhai app ne joh dikhaya canwood tapes same mera bhi hai meine apka formula apply Kiya to it's not functioning, can u help me...?
did you tried playing with aux input while running song from cd at the same time it should overlap the cd song and play's the aux input
@@Life21channel hello sir my cd ray is not working properly that's why display error cd on screen,
is it needs to change the ray or ....?
Plz reply.
Mine is also same cdplayer..and same cd error problem...if I solder this aux wire. would it work??
@@Life21channel The CD player of my Kenwood KDC MP4026V is also not working , showing some error code like E-05 ... will it work if I connect there like this ?
How can I put a USB in a old care radio
i did it works fine but how to get back the cd original sound work
i have the same kenwood player board you worked on
Just disconnect the Aux
Mere stereo ka front panel nahi kaise chalaye Sony cdx g-1150u hai please tell me
do i really need to put the ground in a-ground or GND ? what ground use i use too many grounds here
GND
Cd and aux both sound comming togather
mine also is agnd. should u out there? pioneer
Is it possible to after marker stereo
sir i have a jvc model no. kd-g162 any advice on how to connect aux
sorry the basic thumb rule is to find the Rch Lch Agnd and bypass them with Aux connections to overlap and mute the cd audio track works with any player if you find those connection points
works in Kenwood mini disc this
after wiring... how to select aux mode???
+Vinay Patel just play the CD/DVD (Keep DVD/CD track playing)Mode and connect the AUX cable and play the song in mobile..now the audio from the AUX source will take over the CD and you'll listen the AUX source (AUX overlaps CD songs)
Life21 Channel thanks
+Vinay Patel 👍
Life21 Channel how the volume controller works?? i mean streo player volume controller works or not?? and if i connect my mobile through aux so how can i manage the volume of mobile and streo player???
+Vinay Patel everything works just normal as AUX in other cars ..in the player i made DIY AUX I can control volume in player and also in mobile individually.. it's nothing gonna do with volume control we're just by passing the audio signals
Sir please help me with connection of aux or blutooth for pioneer KEH-1905 model car stereo. I can share you the circuit diagram Which i downloaded fron google
Can it play without Cd? only Aux connection?
Nope it can't
The cd system should be intact inside, as sound output from circuit will only work when CD is playing song
Yes, you can solder them directly to the pre-amp...
hallo i have the seim kenwood but with E99 problem in cd lecteur haw i can teke cd mode
i have an alpine stereo. CDE W925ehi. There is no aux in. Will this method work?
It may work if you found those point's like in this video
@@Life21channel it is working like charm.. thanks a lot
does it require a cd to play? what kind of cd? blank cd?
@@gilberttan7244 it never required CD for me. I just tapped the circuit for LH and RH channels.
Cd and aux both are work or not
Bro I have same model ok Kenwood that you used in video can u please repair this also please bro please
if you have the same board then find the points and solder the aux cable simple
How to find rch lch point in pcb
Service Manuals...
Pl suggest aux input connection for blaupank Hanover car cassette player.
Thanks in advance.
sorry bro i haven't tried but same connects work for most
I have Pioneer DVD front icon where is this option in this
Can I do the same with a car audio that has usb port , if yes..how do I do the wiring of left channel , right channel and ground with the usb female port or in the board ?
You can just get an adapter for it
@@alangodin2090 I don't know about that adapter , can you be more precise about the market name of the adapter , please ?
They’re just known as “3.5mm to usb” adapters. You can get them with male or female ends on eBay for about 3 dollars.
Hi,
what if you don't have a cd or cassette player? My Sony DSX-A400BT doesn't have one. And I want to have a USB port on the backside of the radio to add an hhard disk unit. D'you know any trick?
it already has usb at the front, you can just move it anywhere you want right?
your best bet would be a cheap mp3 player for the hdd as for adding aux open your stereo and tell me what chips are inside
another 'labelled' mboard! Mine has no markings, neither does the cd board. Any ideas?
In my sterio there is no cd selection, so to play aux audio how can i select mode. Cd mode is getting activated only when i put cd in. This time the audio output from my phone is getting disconnected and phone starting playing audio through its speaker
this method only overlaps the audio output from the CD / cassatte audio source if you've followed the instructions and connected proper connections on board ..try changing AUX cable of your phone and try with different phones sometimes faulty cables can stop
I have stereo cd500 can do with it
brother make a video on attach a lcd screen on single din head unit. I know it's hard but not impossible.
Wtf 😅
Bro ,can i make silent audio cd by downloading a silent audio track and burning it
I have also done but not working, if i connect external speaker to cd player lch rch point music is coming out
Yes, worked for me...
Hi. .. how to identify R chanel L chanel ple tell me .
@2:57 You'll see some markings on your board Agnd,lch rch = Ground ,Left channel,Right channel
Alternatively, try to google a pcb wiring diagram for your particular stereo. The left/right channels may have a different code on your unit. They should be close to each other anyway. Hope that helps.
Bro my stereo is radio and caset stereo so how I can use radio and aux
Hi sir i have tried but its giving TOC error . Please help me how to remove this error .
Also let me know how to select AUX input.?
Even i have tried with blank CD also its giving same error
try to write low noise sounds instead of blank or complete track
Hi,
I have tried what you have suggested but its not working.
give me your email Id i will send you wiring images
DOWNLOAD A SILENT MP3 FILE, THEN WRITE TO A BLANK CD.... USE THIS CD WHEN YOUR CONNECT AUX CABLE
Bhai mere pass pioneer keh-1950 car sterio hai cassette player vala
Kya vo bhi ho jayega convert AUX ma
www.amazon.de/NaiCasy-MK008-3-5mm-Auto-Kassettenadapter/dp/B07GGK4YP7/ref=asc_df_B07GGK4YP7/?tag=googshopde-21&linkCode=df0&hvadid=308583700003&hvpos=1o1&hvnetw=g&hvrand=15819664295918825746&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9042504&hvtargid=pla-683766740802&psc=1&th=1&psc=1&tag=&ref=&adgrpid=58861667742&hvpone=&hvptwo=&hvadid=308583700003&hvpos=1o1&hvnetw=g&hvrand=15819664295918825746&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9042504&hvtargid=pla-683766740802
Esa kuch le lo.... ye Cassette lagao aur aux cable Bahar rakho .. :)
I cant get lch and rch
Press 1 for english
अगर 3w की जगह 10w 3इंच का स्पीकर लगा हो तो क्या प्रभाव पड़ेगा स्पीकर woofer है
Respones
Sir i have sony stereo which plays old audio casettes ,but i cant able to find the points to connect the aux lead
Plzz help me
+Sarthak Garg send me board photo if I can find I'll help
Kk sir i will send it to u ASAP
Kindly provide me your email id
How you gonna select AUX if you turn on the stereo, normally it turns automatically to am/fm, aren't you gonna install input selector switch?
No for me it overlaps with the audio signals from the CD in CD mode so there is no dedicated aux mode or any other options what it does is it simply overlaps with the audio from the CD so cd=aux
If I put mode CD and there is no cd it will switch automatically to radio, how it will work ?
the CD will no longer work ? can you explain it more thanks
Write a cd with low or ambient sound and try with it usually aux will replace the cd track
Bro my car CD player is showing Error 11 while putting the CD, so i am planing to attach Bluetooth module inside the stereo. My requirement is the module must work when i choose CD mode. please help me to find the power in put to the CD drive from the ribbon wire connected to the drive.
I would just tap into the constant 12v and leave the bluetooth on. Then selecting CD will just play the audio
I have a kenwood kdc mp625. I do not have anything near the cd ribbon port labeled LCH or RCH. Nothing on the board with rch or lch either. Any other suggestions to find these channels on this board? I'm sad lol. This is such a cool mod I never imagined would be possible.
I am also trying to find
Same here bro did u find?
@@infernocreations9481 Look for "service manual" (not user manual) of your player, since it is a major brand, it should be available somewhere, it contains the sheets and diagrams. I found mine I have an old Pioneer 2800 .
@@samibouhadida5314 bro it's too old that manuals were lost
@@infernocreations9481 www.manualslib.com/download/831910/Kenwood-Kdc-Mp6025.html
Hello, what if the cd player mechanism is bad, how to fool the motherboard to play from the aux? Thanks.
Maybe just put an old cd in?
@@ColoradoMiniCrawlers the player mechanism went bad, it doesn't play discs
lles majeurs maj i meant to put one in to trick it not to play the disk
Without cd mechanism sound will come until unless its play something
Anyway to repair a faulty aux port on an aftermarket radio?
first name last name buy a life
I' can't afford gift me one :P
bro i have jvc kd-g335 model .
there is no lch rch gand how can i find
Did u find out
bro how to connect aux in alpine model no cda-w560e
I haven't seen alpine model but the procedure is same for many models you need to find those AGND LCH RCH pins and connect the aux in and play in cd mode
How to make USB input
At the end of the video, "if you have any doubts please leave a comment" what a click bait, knowing, alot are gonna comment about not giving a preview of sound
no not a clickbait :)
God bless
Thanks
Welcome
Sir mere pass jvc ma kd-g545 he to Bluetooth kese chalu karu help me
Can u please add auxiliary to this bro please
how to install usb port in kenwood kdc mp336ax
this isn't google dipshit