Audacity Lesson 6 - Increase and Decrease Volume

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 80

  • @NeilRoy
    @NeilRoy 6 років тому +6

    Very nicely explained. A neat trick you can do with this as well, is you can amplify sections on individual tracks so that the sound seems to travel from your left to your right or vice versa. I've used this on effects for my video game (Deluxe Pacman) for certain effects to rapidly go from left to right and back. Simple to do, but sounds great.

    • @TJFREE
      @TJFREE  6 років тому

      That's a cool trick. Thanks for sharing!

    • @johammerstein3605
      @johammerstein3605 Рік тому

      @@TJFREE could you do one about equalizing the volume of multiple audio/music files?

  • @Chee.Y4ng
    @Chee.Y4ng 4 роки тому +5

    So amplifying is to lower the volume. Thanks! I've always been moving the gain to the negatives thinking that it would make my vocals more quiet, but it doesnt.

    • @AmanKumar-sl4by
      @AmanKumar-sl4by 3 роки тому

      No amplifying totally depends on you, if you want to lower down the sound you can go with lower decibles and vice versa.

    • @mpsmourya6675
      @mpsmourya6675 2 роки тому +1

      Where is the actual tutoriaal.what you explained was self talk🙄loud thinking

  • @rhomo
    @rhomo 3 роки тому

    Thank youuuuuuu!! 2 years later, saving my butt 😆

  • @DennisVSyoutube
    @DennisVSyoutube 2 роки тому +1

    thanks man! This was very helpful

  • @emeraldlupin2934
    @emeraldlupin2934 6 місяців тому

    So you can use Amplify to raise OR lower the volume, or use it to fix bits of clipping? I've been trying to do readings, and I'm currently struggling with getting the volume good and loud while also trying to avoid clipping at all. Maybe it's the combination of my microphone volume and recording volume, but I tried to use Amplify to up the volume of the whole reading after I was done recording. It didn't increase it by much, and my efforts to try and increase it bit by bit left me worried about inconsistent volume.
    But I thought maybe I could use Amplify to fix those bits of clipping in the base recording in post, just so I don't have to worry about it or try to redo louder bits, because it's so hard to try and be loud and energetic (like say, when someone is yelling or distressed) and yet not clip, you know? But...does using amplify to fix clipping STILL leave the audio distorted? Or, if the clipping portion is really small, would you even be able to tell?

  • @annette2687
    @annette2687 5 років тому +17

    You sir, are a genius. Thank you so much!

  • @weeverob
    @weeverob 3 роки тому

    Tx. I want to record the sound from a streaming broadcast. While in the record mode moving the mic slider at the top of the Audacity player has no affect on the recording volume level. Can you give me direction? Tx very much.

  • @stevedellatori1612
    @stevedellatori1612 3 роки тому

    Thank man. I needed that info in the worst way!! Trying to navigate Audacity has been tough for me. I think I will look at you other lessons also. Thanks again

  • @YoungQaisi
    @YoungQaisi 2 роки тому

    How do I gradually reduce the sound of the wave

  • @MasterWingman
    @MasterWingman 4 роки тому +3

    Thank you so much. I was able to mod the alarm sound to a bearable volume since my alarm clock's min level was still way too loud.

    • @dearbrave4183
      @dearbrave4183 3 роки тому

      Hahaha the things we do for extra minutes of sleep😂

  • @ajgallego2409
    @ajgallego2409 3 роки тому +1

    This video was a lifesaver, thank you for the straightforward, informative content!

  • @nilimachate3488
    @nilimachate3488 4 роки тому +1

    I Just started learning this software!! Its very useful as your channel is the only one which I've found with proper content & awesome teaching skills !! Sir Thank you so much for your lessons !!
    It's my 2nd day with my best friend we both are learning this software😊.

  • @lytnin88
    @lytnin88 3 роки тому

    Very well explained. Kudos to you. I noticed you avoided using the word "attenuate" although I'm sure you know what that word means. Did you avoid this word because it sounds to "techie"?

  • @SayanPall
    @SayanPall 2 роки тому

    How to control condenser 8000 microphone gain in Audacity?

  • @ASMR_Orangely
    @ASMR_Orangely 3 роки тому +1

    *THANK YOU SIR! I NEEDED TO KNOW THIS FOR MY ASMR VIDEOS.*

  • @Omrie69
    @Omrie69 2 роки тому

    Great video mate, quick question? do you have a video that shows you how to lower your import DB levels? cause i'm using the factory settings i feel they might be a tad high loads of the audio is near clipping. wanna minus maybe to -4db stay in the amber. cheers

  • @dejazO0
    @dejazO0 3 роки тому

    how can i match all thoe waves in one level

  • @PonchoTrooper
    @PonchoTrooper 2 дні тому

    Thank you so much! Your video is really helpful! Dropped a like!!

  • @asenethparker8561
    @asenethparker8561 2 роки тому

    Thank you. I'm a beginner this was very helpful.That was quick and simple. Awesome.

  • @2bit661
    @2bit661 2 роки тому

    I search for "audacity record volume keeps lowering." Your video shows up on the search and utterly fails to address the problem.

  • @empressthechildlike
    @empressthechildlike 3 роки тому

    Thanks! How many dB should it be on average? (I don't mean LUFs but the audacity levels, as seen up, by the loudspeaker icon in audacity).

  • @saliphie4165
    @saliphie4165 3 роки тому

    If i use amplification in 6hz or other hz, will the hz change or nah?

  • @danielspartan7754
    @danielspartan7754 4 роки тому

    I’ve been trying to make a few videos for UA-cam but had issues with original audio source. The wave peaks in my tracks for whatever reason were very low even though the sound was pretty loud. After using the compressor effect and normalise audio I increased the gain to increase the volume. I then had the track levels where I wanted them then rendered with video in Vegas pro and the end project was fine. Once uploaded to UA-cam however I noticed it was normalised their end to -12dB.
    Would adjusting it this way fix it as it amplifies the wave? Always confused me why they were so small considering I was hearing it load. Think I increased the dB in Vegas and it did improve output once uploaded?
    Does this make sense as I think I’m understanding it now, thanks.

  • @robin55gomes
    @robin55gomes 4 роки тому

    It is a good tutorial. But I have a suggestion. When you amplify, reduce or distort a section of a track it will be even more helpful if you play it and make your viewers listen to the actual distortions rather than just describing the histogram, which is obvious. So audio is not what you see but what you hear.

  • @monikamoon14
    @monikamoon14 4 роки тому

    Editing some music for an important presentation, the music was too loud and this is just what I was looking for. Thank you :D

  • @andrewkowach9156
    @andrewkowach9156 3 роки тому

    Thanks, I have just been increasing, decreasing through 'Amplify', I didn't know it did that to the original wave...........thanks

  • @TheRandomINFJ
    @TheRandomINFJ 3 роки тому

    Hi. I watched like 6 of these bad boys and only you got to the point. I adjusted my Amplify to a negative # like you said and boom chicka wow wow. Thank you 🌹 💋

  • @agreencat3484
    @agreencat3484 3 роки тому

    The sound of my android smartphone is way too loud even at minimum when I play music. I tried apps to lower the volume down minimum but they don't work as promised. With this tutorial I will finally be able to enjoy my music again

  • @Herozonex200
    @Herozonex200 4 роки тому

    So that what amplifying does.

  • @thekristiepalin
    @thekristiepalin 5 років тому

    I'm having something strange happen with this, if I try to select a small portion of the file and decrease the volume of it, when I move the slider to the left to decrease it, it actually increases it. If I move it to the right, it also increases it and actually clips it. This is even if I increase or decrease by just 0.1 If you can offer any insight on what might be happening here and how I can actually lower or increase the volume of sections of file that would be amazing! :) Thank you!

  • @mascot6285
    @mascot6285 3 роки тому

    and how to save?

  • @lotharnowak7264
    @lotharnowak7264 4 роки тому

    Thanks for a nice simple instruction....👍

  • @monicaannebooks7741
    @monicaannebooks7741 2 роки тому

    Very well explained. Thank you!

  • @paulonunesdemoura6653
    @paulonunesdemoura6653 3 роки тому

    Great explanation. Many thanks!

  • @phoqueme
    @phoqueme 4 роки тому

    i often get confused between Amplify, Limiter, and Normalize

  • @davidjuarez-mk6dv
    @davidjuarez-mk6dv 3 роки тому

    thank you help me a lot to fix my record

  • @JordanWotila
    @JordanWotila 4 роки тому

    This was super helpful. Thanks!

  • @ALF8892
    @ALF8892 3 роки тому

    Good shit. Real good shit. A1 stunner

  • @mikiyasleul3041
    @mikiyasleul3041 5 років тому +2

    thank us sir this tutorial is really helpfil and it makes me more comfident and good enough.
    thank u again.

    • @TJFREE
      @TJFREE  5 років тому

      You're very welcome!

  • @taniyaaggarwal5098
    @taniyaaggarwal5098 3 роки тому

    Thank you for the videos!! They are absolutely amazing

  • @mrfagamer3287
    @mrfagamer3287 2 роки тому

    thanks man your video helped..

  • @Dondlo46
    @Dondlo46 3 роки тому

    Thanks now I can earrape any music

  • @Violetgalaxyshimmer33
    @Violetgalaxyshimmer33 4 роки тому +3

    Thank you for this tutorial :)

    • @TJFREE
      @TJFREE  4 роки тому +3

      You're welcome!

  • @royalkaraokestudio6299
    @royalkaraokestudio6299 4 роки тому

    Very helpful video sir

  • @yaelederer
    @yaelederer 2 роки тому

    thanks a lot!!!!! very helpful

  • @wondermentpuppettheater7095
    @wondermentpuppettheater7095 4 роки тому

    Thank you, this was very very helpful

    • @TJFREE
      @TJFREE  4 роки тому

      I'm so glad!

  • @barbarasavin5370
    @barbarasavin5370 4 роки тому +1

    thank you so much...I truly understand this now

    • @TJFREE
      @TJFREE  4 роки тому

      You're welcome, Barbara.

  • @mihai6564
    @mihai6564 2 роки тому

    good video

  • @rubens.bueno90
    @rubens.bueno90 4 роки тому

    Thanks for this video!

  • @trancetime1
    @trancetime1 4 роки тому

    Thanks! It's exactly what I needed.

  • @imtxic7104
    @imtxic7104 3 роки тому +1

    thank u good sir

  • @christarlite2
    @christarlite2 3 роки тому

    Thank you my friend!

  • @SantosPiano
    @SantosPiano 3 роки тому

    Thanks so much!

  • @sworupdhaugoda2880
    @sworupdhaugoda2880 4 роки тому

    very helpful, thank u so much.

  • @dalmiromaggioli9650
    @dalmiromaggioli9650 3 роки тому

    Thank you!

  • @JaiKishoreTheSacredSprit
    @JaiKishoreTheSacredSprit 3 роки тому

    Thanks sir,

  • @unstoppablezone4980
    @unstoppablezone4980 4 роки тому

    These are the very best tutorials...one chunk at a time...KUDOS!

  • @rifkybahsoan4199
    @rifkybahsoan4199 4 роки тому

    Thanks brother.....👍

  • @bluebety
    @bluebety 4 роки тому

    thanks

  • @thatfastboy4440
    @thatfastboy4440 4 роки тому

    thanks man

  • @dibasshrestha9761
    @dibasshrestha9761 4 роки тому

    thank you

  • @wadewrld6344
    @wadewrld6344 3 роки тому

    thank you!!!

  • @abdulquddus2822
    @abdulquddus2822 4 роки тому

    an amplified thanks

  • @iceynipyt7790
    @iceynipyt7790 4 роки тому

    Cheers

  • @jackfrances4822
    @jackfrances4822 4 роки тому

    thank

  • @snbailes1
    @snbailes1 4 роки тому

    magic

  • @Cercy-vm5hm
    @Cercy-vm5hm 4 роки тому

    Thank you so much!! You're a lifesaver!

  • @YoungQaisi
    @YoungQaisi 2 роки тому

    How do I gradually reduce the sound of the wave?

  • @leahgodson2319
    @leahgodson2319 3 роки тому +1

    Very helpful, thank you very much.

  • @arteria6536
    @arteria6536 Рік тому

    Thank You!