As a person with 40 years of engineering experience l can tell you being able to operate a cad program does not make you a designer. It makes you a drafting person with a sophisticated pencil. What makes you a designer is an education in design plus years of experience. CAD is a tool in the same regard as a hammer and chisel are tools.
You are wrong. It goes both ways. I have been a CAD (computer aided designer) for 30 years and most of the design is done by us. Most of our engineers are there to run calculations and analysis to make sure that our designs are up for the task. They have very little to zero design capabilities. Of course, there are some amazing design engineers that can do what I can't.
I get both your points and you both have more work experience than me. I have 10 years of engineering work and 15 years of SOLIDWORKS. @John, that hammer and chisel in the hands of a Michael Angelo would give you statues that leave you in awe.
@@jtcmlt1l am not wrong. Being able to draw or model something does not give you the ability to understand materials or manufacturing processes and the constrains they impose on the design.
@@johnbrown6189 Well, with 40 years in the engineering field, you should know that today drafters are way more diverse and take on a lot more responsibilities and challenges than back on the days. We have, and continue getting, "drafters" that can design, run calcs, run stress analysis, understand mechanical and structural loads and applications, etc, etc, etc. Engineers are freeing some of their time so they can invest it on things that we can't do.
I don’t charge an hourly rate. I charge $3-5k per job based on the results. I don’t provide a design service. I provide a route to manufacture…it’s all the mindset
When I first started university, I was the dumbest at CAD and I used to ask my lecturers at college “how is this related to my field of engineering which is aerospace engineering?” And today I understand the value of solidworks designing in every engineering industry and it is now my favorite subject and topic to work with 👍🏻
I just did my first job, very basic for $50/hr. I charged for 3 hours when my design ultimately took about 5. I think it’s ok to have a lower hourly rate and eat some cost if you are new to modeling- it’s a real world test that gives you practice and makes you better, and you get paid for something you would’ve been practicing anyway!
I tried Upwork a few times, but the ratio of good clients to complete novice time wasters with no cash was really bad. Not to mention that most of the time I was fighting for work against India and Pakistan. So the clients had really cheap expectations on what it would cost and my competition was cheap too. It was a no win situation. Spent most of my time sifting thru bullshit jobs to find 1 in 50 "ok" clients. I started at $50 an hour but dropped it to $40 and would often have to do a quick model to show the client I could really do the job in order to even get a reply from them. My experience with it really sucked.
Matt, my experience on the other side is exactly the same. I've tried scouring through the upwork contractors as I've had people want to charge 50hrs for a part I can do in 2. I'm still looking for someone to contract reproduce drawings or reverse engineer from parts if you're still looking for side work.
20 Years experience and I charge 225 per hour. I have designed parts and assemblies for Schlage, Alarm Lock, DEX, Ingersoll Rand, The U.S. Navy, General Dynamics, Pratt and Whitney, and so on. I have personally designed all of the washing machines and dryers for the Navy surface ships and submarines, powder metal tooling, blow mold machines and molds, Rolling Mills, Draw Benches, Wire Payoffs and Take ups, Spring coiling machinery, production lines for assembly of various products, electronic locking devices and multi point panic bar assemblies.
I made my computer investment and I don't want to work connected to a place anymore. I have been using solidworks for 20 years and I appreciate you very much. I am sure that I can earn much more on these platforms than I can earn in the country I live in, but I have a handicap to keep my hourly wage low. If only I could be visible. I can help people from all over the world and earn money
For everyone who is going to run straight to their computers after watching this and start an account in a freelancing website expecting to make money: Finding a project as a beginner freelancer is one of the hardest things to do on earth from my personal experience. Believe me, it is very very very very hard. I am person who tried a lot of stuff to do freelance (not just CAD design) for almost 3 years while I lived in 2 different continents, and I could not find a single job, other than some fake guys who tried to get free service from me. So before you try this, keep in mind that it can take ages to start with something as a freelancer!!
be careful with these service seekers, sometime they just post a job, just to get an interview with you. just enough to get an idea on how it can be done. before doing by themselves
exactly, people dont get it there are million people from India, China , Bangladesh who work for 5 dollar per hour. also, you need to have relebvant experience at industry and references
@@randomness4272 I took and passed the CSWA with a perfect score in my Freshman or Sophomore year of college. The exam is okay, but honestly a lot of hiring managers I've spoken to are not overly impressed with the skill set that the CSWA requires. For example: you're not necessarily going to understand the need for hole wizard features, patterning features, etc. but those are critical for efficient and functional modeling. It also doesn't really give you more "expensive" skills like surface modeling (worth looking into if you want to do consumer product design), sheet metal design, design for plastic injection manufacturing, etc. Honestly I would look into getting skilled at Solidworks and aiming for the professional certification instead.
I did autoCAD back in the university, it was one of my favorite courses. Now because of Job market I want to specify in SOLIDWORKS and Fusion 360, possibly would love to learn ANSYS DISCOVERY too. What's your take on that. Is it possible I can be doing or learning all at the same? Please suggest and guide me
I recently joined the solidworks model mania this year and sadly, I lost. Forgot to hollow out a certain area of the object and missed the correct mass by a large number.
I have 8 year experience as a fitter/welder & sheet metal former. 7 years experience on AutoCAD, learnt the basics from UA-cam in my own time on LT then transitioned to 3d within 6 months. Currently employed full time making $48 p/h. Role includes site measuring, drafting shop drawings, installation drawings & the occasional render (for high end clients). Having a fabrication background definitely made my transition to cad easier as I know how to fabricate/install 90% of the products I’m designing.
For my internship I was paid $20 an hour for modeling components for my work's hardware library. I now make $40 an hour doing CAD modeling and drawings with GD&T. Every part I model needs a drawing and every drawing has GD&T. I do not do freelance work but I am potentially interested in doing it in the future. At work I use PTC's Creo Parametric but if I was doing freelance work I would probably want to use SOLIDWORKS because I like the software more than Creo and the license is cheaper.
I also have 10+ years using Creo, teaching it and setting up the configs and templates. But in the last 2 years I have been using Onshape more regularly and it is very similar to Solidworks but completely cloud based with built in PDM
Solidworks is a tool. Like a pen. Knowing how to use it, cool. Knowing how to design something and find technical solution that are valid and go on an improvment process on engineering point of view is what is valuable. Have technical and engineering knowledge; Solidworks or any other CAD software knowledge alone is nothing.
I was doing gating design in solidworks, transferring it to inspire cast for solidification for solidification models. I was paid 17.50hr asked for a raise, got 50k only 40hrs. Then I started learning the faro quantum arm for dementions. They never offered me training for the scanner and I almost had it figured out after a couple projects. They wanted me to train someone and after telling them I want more money if my duties keep growing and I got fired.
Inspire cast is a software that does solidification models. It allows you to set up pour temperature of metals and simulate the pour of casted metals into the designed mold. Inspire cast is made by Altair.
If you are an employee - you get paid around $40 an hour - but your boss bills you out at $140+ per hour. If you work for yourself, you need to be in the $140 an hour range or you will not cover your costs and your average hourly income will be less than $40 after all expenses and taxes. The rule is - you should bring in 3x the salary you want to pay yourself.
@@shivanshsharma72hh referrals, use your contacts, family etc. otherwise get a job 1st, then create a client list. If your the best, the clients will look for you. Win awards etc..
Hey Aryan, new to you channel and loved the video. The thing I would like in supplementary would be for you to model this your way! You seem to have your shortcuts and ways of making this design, and seeing that would be great.
Hi, I'm a bit new to solidworks, just 2 years of experience, and I was hoping I'd be able to find a job on fiverr or linkedin, do you think it's possible to find a freelance job now?.. or I should wait till I've been able to get CSWP and some certifications to prove my design prowess.
So I was thinking even 250 was way too cheap for a functional design, and got curious when I started thinking about mounting hardware, plumbing fittings, and the aerator. Ended up looking for the original as reference and I was right, 250 is WAY too cheap for this work. I found it for sale in two places, and they're selling these things for 17,413.95 each! With that information, you could probably charge more like 2~5k for a production ready model. Metal 3d printing is expensive, so anyone seriously considering it as an option should have that kind of budget.
Couldn't agree more. But don't forget that this was solely a SOLIDWORKS modeling test. None of these models were production-ready and (maybe unfortunately) I didn't define that for them in my request
@@gerdokurt The assignment mentioned the tubes needing to be hollow so water gets through, and "it should work" was part of the request. So I would base my quote on something you could actually mount and run water through.
@@sleepib Bro, tell me how you mount it. I dont see any thread. How does the water goes in the tubes? Where are sealings, the sprayer etc. etc. etc.. This is not a production ready product, its not even a proper design prototype. you can probably print it and arrange it for a small foto... I wouldnt pay 30 euros for this. A guy in vietnam using freecad or blender does a model like that within an hour.
Experience is what makes you good. Passion is what fuels the efforts to gain experience. Good education and good tools help you get good faster. I love SW but it is my passion and 20yrs designing stuff that makes me feel like i am good at what i do. If i do say so myself! 💩. By best teachers were my mistakes!
Trying to make $100,000 a year as an industrial designer who freelances is possible, however difficult as there are many who are well versed in part design, assemblies, and surface modeling. You can make much more than $100,000 with Solidworks. Solidworks has a much broader capability. Check out the areas not commonly spoken about. Solidworks Electrical, CAM, Composer, MDB, simulation, motion, plastics, and flow simulation. Engineering Analysis is a whole field that few speak about and it offers great compensation. Solidworks is a great software with many embedded and 3rd part addins.
Sounds good. Depending on how much know-how and experience you are bringing into your work, you could raise that price. What matters the most in your hourly rate, is the amount of value your client is getting from you. If your 1 hour work eqauls or beats 10 hours of work of an intermediate's, then you should be charging 10x his/her rate
How many times do you have jobs and where do you offer yourself? I am quite good at AutoCAD but I am syuduing but I would like to get some side money. Thanks.
@@rbasket8 have slowly built up a client base over the years, most of them become repeat customers. The problem with a lot of these companies is they aren't quite big enough to hire a draftsman full time, its cheaper for them to pay me $1000 a month to work on a project here and there, than to hire someone full time. You just need to find these mid sized companies and introduce yourself. The other options is to try searching a online job boards like seek or indeed, find a job listing older than 30 days and ring the company offering your services, we are in a once in a lifetime market where the employee sets the price! All those platforms like fiverr are just a race to the bottom $ wise, you are competing with someone on the other side of the world who would do the job for 1/10th of the price. fuck that. I have an advantage over others as I am very good at what I do, which means if something takes me 1 hour to complete, it would take a regular worker 2-3 hence why I charge 3x the price. Moral of the story here is get out there and do something, nothing is just going to fall into your lap.
@@with-Aryan Exactly! I'm very lucky to have been trained by someone at the top of their game, for instance, a common drawing in my field (not related to my above comment) takes me 1.5 - 2hrs to complete, I know for a fact that it takes draftsman at other companies 8hrs! You can't just walk into a job and start charging that kind of money for something, you have to be good at what you do. Can see from your video here that you know what your doing as well. My advise for any Cad drafters is learn the shortcuts, then customize your keyboard commands. If you're still using the ribbon for everything after a week then you may as well give up and get another job.
Hey Aryan! I'm a CS student, but love sketching precise CA designs and figuring out manufacturing methods. Do you think I can get "my foot in the door" as a non-mechanical engineer? Thanks for your videos - they're great!
I'd charge a minimum of $120/hr for my time. I currently do automation work for a medical device company where I make automated equipment and fixtures for mass production. I'd say I'm fairly skilled (working in industry for 4 years but working with SW for 8 years). Does that rate sound reasonable at all? Seems like everyone is doing dirt cheap work.
The value you bring to your client through your work should define your rate not just years of experience. Do you do GD&T? Raise your rate. Do you do MDR usability? Raise it. But I'd say you are charging about right for now. Consider increasing it soon
@@with-Aryan I like that. I know I'm a good designer so I'll definitely remind customers that my ingenuity is part of the cost. Definitely do GD&T where needed. No MDR but I also do DFM. Will increase rate when I get my CSWA and CSWP passed. Been wanting to do it for years and you inspired me to do it.
Solidworks its just a tool! Im steel designer and I earn sometimes $500/hr and sometimes $250/hr. Because its depend what are you doing. I think im very fast about solidworks workflow, so then its just about your knowledge in the field of your work. I have no fuckin any CSWA or any self-proclaimed titles. Im engineer and do real stuff. SO the most important thing its not how good you are in solidworks but whats your knowledge!!
Hi Sir, would you mind if you give me your advice for witch field in solidworks I focus in and follow (most paid) : simulation or workflow or motion...? Because I'm new in this mater. Thank you in advance
@@soufiane6596 My advice is. Go to the university. (or start somewhere like draftsman....) Learn, listen, be humble and open minded. Listen older engineers with skill (becouse they already struggle with problem and engineeing is constantly struglle and fail.)Today many jobs are highly specialized. I do mostly sheet metal and welding structures.. So its depend. The most overpaid jobs in my field is Static engineer. No problem 10k per month. But this job requires deegre and many experience.
Hey man! I really love the way you work! There are things that I don't quite understand in what you did. Regarding the first sweep. It disappeared after you made Sketch 8. Is it some feature to do it? To keep the sweep sketch and making another sweep with it.
Do you offer any tolerancing, in your drawings? Or taking the manufacturablity into account? because your rate is fair and I want to understand what comes with it if I ordered from you
@@with-Aryan I do invest a lot of time in DFM prior to the modeling, work mostly with surfaces and curvatures (when applicable), and TRY to configure all models geometrically (not always easy😅). I consider myself an average 2D drawer but know my way through geometric dimensioning and tolerancing.
Hello Aryan. I just finished your excellent 3 month program. Next is the Solidworks Pro certification exam. Listen, is there any way you could post your 37-minute tutorial on this ? I'm 100% sure everybody wants to see it. You have become a respected Solidworks guru. And your team of assistants is top notch
This is a trick question. I always say it's $10USD/hr and charge ~$50/design. Even though I have a +5 years of experience and a great portfolio, people freak out with high hourly rates. I would rather do $50 jobs that take me under 20 mins., than having to explain to people why my hourly rate is so high. I tried raising prices to $50 and $150 and didn't get the project in 3 months. I know I'm good and fast, so I rather get many offers in bulk. They always come back because they know I do geat work, but they never know I work 5x faster than what I tell them. Good video.
Aryan, do you know about the feature bounding box in SolidWorks? It's a very helpful tool. Especially when it comes to preparing models to be 3D printed as most service bureaus charge by the bounding volume of whatever you want to print. Both designs were pretty lame, actually. Before you showed the time lapse of your work, I was thinking, "I would model it straight an then use the Flex command."
Yeah, took me also by surprise he didn't use Bounding Box... :P But truth be told, even Solidworks is so big of a program that no one can truly know all of the functions, and remember that there's a specific function for a niche task you're doing once a year or so.
Hi Aryan, thank you for the informative video - I'm going to try modelling this myself and I'll let you know how I got on. I'll be following more of your videos!
I'm currently a 4th year student studying Mechanical Engineering, so I have had pretty decent experience with Solidworks (not an expert). Most likely will be working as a manufacturing engineer as my graduate role. How does one get started on this as a side job? Any courses or things I can do to improve my experience? [Also with CFD and FEA if anyone has any advice]
Graduated a couple years ago with a degree in Mechanical Engineering, my advice for you is to learn a lot more on GD&T and tolerancing. My program only had one class on it, but it has been one of my struggles my first couple years in industry.
Good question. Look knowing how to model is only the base foundation you must have. But you also need to learn a few complimentary skills on the side such as GD&T, learning a bit about manufacturing process because they are the deciding factor on your modeling. Also, building a portfolio would act like your marketing side which you badly need to create authority.
Video is 11 minutes long. I have already figured out how to manufacture this in that time. Modeling is easy, modelling for manufacture takes longer. I may make some of these and sell....
What is the best way/first steps to get into creating models/technical drawings working for yourself? I currently work as a design engineer, producing models/drawings for manufacturing, or DFM using geometric tolerancing using SolidEdge, although I have used SolidWorks as well, and would like to start small producing models/drawings for customers in my spare time and see where it leads.
It would be fair to show your work on this model to the public so that everyone understands the level of your skill, and not empty words. But thanks for the video, it was very interesting!
hmm, here's my dilema. If I upload a 40 min long video just modeling one object, that video won't be watched at all. But it still takes a huge amount of time and money from me. So sometimes, even though I want to post something, it's effort to it's reward is so high that it makes me procrastinate or move on in general from that idea
Hi aryan, currently in my last year of college. I have 3 years of experience with solidworks. After this 'course' im gonna study further for like another 4 years of mechanical engineering/solidworks. Would u suggest me to already start doing jobs? or just start practicing more for better, and complexer work etc.
I worked 15 years with solid works now. I'm a mechanical engineer we design special machines mostly for automotive industry here in Germany. Unfortunately I don't get a 100k/year 😅
I've been an employee too and I too live in Germany. I understand. You could use your creativity to think outside the box and design a machine with the knowledge you have and use the connections from your current work to maybe start a company?
I love the part, its beautiful! One can't go around making it beautiful and functional at the same time without putting a lot thought in the design. One thing that bugs me though, how can this be produced in real life, 3D printing?
It can be 3D printed in a soft plastic and put it in a forge that replace the 3d print with metal. Like most of jewery was make but using plastic instead of wax. Tha hard part is to get the metal polished.
@@felipetesta You have a point. But do not forget that the twists in the faucet are also the water flow channels and they criss-cross one another. Polishing isn't that big of a problem, tumbling in fine sand or magnetic polishing will do.
we can use injection molding as a manufacturing process , because there is no important pressor in the channels , and to solve the problem of the channels we can use a model have the form of the channels that will be eliminate by a chemical reaction after ejecting the part from the mold.
Seems really challenging design! Is there a video showing how to make it "the right way", I mean nice and fluent shape, perfectly aligned and hollow inner-tubes etc..?
Depends on the route you take. There are slower ways and faster ways and it all depends on you and your level of practice. Check my course it's the fastest way courses.solidworkstutorials.net/
Jeez went to check out the pricing on the software after watching this video to see if I could apply my blender experience into SOLIDWORKS and for the price of the software and fees I would hope freelancers are charging more than $250. Are there any alternatives to get started in the SOLIDWORKS ecosystem?
My price is 62.50 an hour. I have a bachelor in Product Engineering(IPD). But I mostly do constructional drawings for small bridges,and machine design. I didnt start long ago but have been using Solidworks/edge since I was 12. I think its a cheap and fair price.
Hi Aryan, I'm a student of Mechanical Engineering, I've used SolidWorks for 2-3 years in university and about 1.5 years at my internship. How can I get into freelancing and what would be a good rate if I'm not confident in modelling complex things? Great video as always!
The most important thing to work on first is a portfolio, go ahead and browser other Top portfolios on the same freelancing sights, and try and replicate them. Another thing that helps come up with a cost is just focus on an hourly rate, all you have to do now is just check how many hours it will take you to finish a gig. With practice all of this will become second nature.
On the second one, the water wouldn't flow through. Because the spirals are separate hollow entities, where they cross, the outside of the shape blocks the hollow inner path.
Good day John, It depends what you want to do with it, you can make CAD your side hustle, or use it for your day job as well, using it to design electrical boxes, and visualize how things will fit, and even run thermal analysis if needed.
hello @aryan, I have experience of Solidworks CAD of more than 10 years and I have produced Full machines using SW, the machines where Bill of material is so large that it needs an ERP system and team of atleast 20 people to manufacture the machine within timeline. I have tried upwork but I had to lower my rate to 30$ to atleast land a few jobs. On top of that, I have done much more complex work then I can find on upwork. I mean I have literally designed machine from scratch to physical machine that sells in more than 500,000$. I am at a stage where I don't know how to find the correct client that has requirement of such high skills. Can you please help and guide on what to do and how to keep my company working?
salam Aryan jan. Babat video khobet tashakor mikonam. Ye soal dashtam agar zahmati nist rahnamaiim kon aziz. aya kharid account upwork (validate shode + paypal validate shode ,....) az servic dahandehaye irani khobe bara ma Irania??
$65/hr, CSWA level- offering Design coupled with CNC programming, went out on my own after being in the Auto Mfg Engineering field for 20 yrs. SW is my first modeling software, always been a 2D autocad guy. Work is slowly picking up on the design side of things, as I get more jobs under my belt, I see good things coming.
@@with-Aryan you keep mentioning knowing tolerances and DFM. I’m not in the freelance world, but I am a daily solidworks user in a manufacturing/R&D role. I couldn’t imagine drawing anything up without regard to DFM. People really do that?
Hello Friend, I live in Nigeria and I have been working with solidworks for awhile but I want to start making money with it as a side business. Please could you show me how to set up the right and profitable way. Thank you
@@with-Aryan hum you must be fast AF great advise don't underbid , or underestimate job remember the patent attorney get 7k just to file it! If its not worth $500 model to customer as a product that might spend 100s of thousands to market and make might be worth passing on.
I had one year of SOLIDWORKS in highschool and have been using it past couple months getting used to it again. What should I try to start getting paid for modeling
@@with-Aryan I mean I want to see a video tutorial in CATIA about how to draw that part. I managed to create the base of the surface, but no way I can do the beak :)
Hey i love your comments and criticism. I just want to ask how else the second guy was meant to hollow the tubes of solid body(combined2) at the areas of intersection of the swept triangle & circle profile? I believe a cut-sweep was the best choice. It is not like he can use shell feature for that since it is a complex geometry. So i look forward to your explanation thanks.
Yes, by the looks of it, he made swept a hollow profile, but there are some intersections. A better way that could work is first add all your material using a sweep and then bore out the internals with a cut sweep.
The Main element to Make that Exercise is Loft, Extrude Boss/Cut, and Reference Plane with Different Angles, the Main Basic to have one Guy with low Price is to gain the Job, he is attracting People by the Low Price, and this Unfortunately, Killing the Market and sells himself with Cheap Price, which is Totally Wrong ! Going back to the other guy with 250$, the guys is ambitious, yes the visual of his work didn't meet your expectations but the way he made the design with, pricing himself with the Work Achieved, made me feel that the Work we do whether it is Right or a Little Bit wrong, is Worth Trying to get it done with training and development, and Definitely the Value of the Output to be done, encourages us to enhance our work and to get better results with more complicated Modeling Design.
It is true that the use of loft, extrude boss/cut, and reference planes are essential elements in creating the design shown in the video. And while it may be tempting to offer low prices to attract customers, it is important to value your work and expertise appropriately to sustain a healthy market. As for the $250 designer, it is commendable that he is ambitious and willing to learn and develop his skills. With training and practice, he can definitely improve and produce better results in his designs.
99% of people listed there price around 50$ need to be very careful. There are law firms fishing around and looking for people that are using pirated license and if there charging $50 an hour. It’s a good sign that you’re not paying for your solid works license. Just an FYI.
Do you know how to prevent instable sketches (without moving to wireframes)? By instable I mean : Flipping arcs, flipping dimensions from negative to positive, or relations that break for no reproducable reason, etc..
Earning $100k in the Seattle area will get you a basic apartment. This wage seemed amazing before I moved somewhere that a small condo cost upwards of $500k... Maybe if you earned this in Ohio you'd be doing amazing.
درود داداش این موزیک خیلی عصاب خورد کن هست با اینکه برام خیلی مطلب مهم بود ولی تا دقیقه ۴ را بیشتر نتونستم تحمل کنم😞اصلا استراتژی استفاده از موزیک را من در ویدیو آموزشی متوجه نمیشم 🤔و از موزیک های لایت و ریلکس می تونی استفاده کنی
Hey Man, after i saw this i was so frustrated... I have an CSWP certificate and have been working for almost 3 years locally on mechanical design using Solidworks. I live in Colombia and here the workforce is very cheap compared to what you are charging, an hourly rate of barely 10USD is expensive in the industry here... I realized I've been doing it all wrong but I dont really know any of these freelance platforms and after watching this I'm convinced I should start. Could anyone recommend a freelance platform so that I can start working my way up? And also, what should the hourly rate be?
Nicolas, estudiaste algo para realizar los modelos? Me refiero a una ingenieria o algo de universidad? Ya que me voy a decantar por el modelaje 3d, modelo desde hace años, pero quiero enforcarme en SolidWorks, pero no he hecho ningun estudio en base de esto.
@@MrBroguiKLM hola, si, soy ingeniero Mecánico y estoy trabajando en diseño de producto hace 3 años... Digamos que el tema de modelaje 3D depende mucho de que tipo de pieza quieras hacer... Si lo que quieres es copiar formas existentes o crear formas propias en modelos 3d la habilidad requerida es más bien "artesanal" y no requiere de mucho estudio técnico ya que tiene que ver mucho más con tu dominio del programa y tu capacidad para visualizar y replicar formas, eso es más experiencia que otra cosa. Por otro lado, si lo que quieres es trabajar en una compañía o para alguien que te entregue planos o que te vaya a solicitar planos específicos con medidas o que te soliciten hacer piezas funcionales para máquinas, requieres de una capacitación mucho más específica... Lo que yo hago es diseño mecánico y conceptual apoyado en modelaje 3d, pero el modelado para temas virtuales como gaming, publicidad e incluso para impresión 3d en muchos casos, no requiere de mayor preparación académica, es más experiencia y práctica. Saludos!
It all comes to a strong portfolio, start off small even provide complimentary work if you can get a review or a nice looking model to add to your portfolio, its a game-changer when it comes to finding more work.
My hourly pay is 0 since I'm still a student and too broke to get a computer...but damn I genuinely didn't know that SOLIDWORKS paid so well for something that easy. For the body of it you could of just made 1 perfectly then used a radial array (X3)
Depends on the route you'll take to learn it! Some ways are faster, and some take waaaaay longer. Usually if you invest in the right course, you could shorten that time enormously. But the normal time on your own, to be a true professional, multiple years
That'd be YOUR marketing strategy but it would be a bad one. No, don't do that. First learn your value, then start asking the right money for it. Don't do that
When I started on Upwork in 2020 my hourly rate kept getting as low as 7 $/h for my first job then I kept raising it to 40 and when there is competition I drop it to 25 .Now planning to settle on 50 $/h it gets better with the more clients and successful jobs you finish but at first you will have to sacrifice a little.
Start with SolidWorks Free (Limited seats) ▶ courses.solidworkstutorials.net/sa-registration?sl=fiv
As a person with 40 years of engineering experience l can tell you being able to operate a cad program does not make you a designer. It makes you a drafting person with a sophisticated pencil. What makes you a designer is an education in design plus years of experience. CAD is a tool in the same regard as a hammer and chisel are tools.
You are wrong. It goes both ways. I have been a CAD (computer aided designer) for 30 years and most of the design is done by us. Most of our engineers are there to run calculations and analysis to make sure that our designs are up for the task. They have very little to zero design capabilities. Of course, there are some amazing design engineers that can do what I can't.
I get both your points and you both have more work experience than me. I have 10 years of engineering work and 15 years of SOLIDWORKS. @John, that hammer and chisel in the hands of a Michael Angelo would give you statues that leave you in awe.
@@jtcmlt1l am not wrong. Being able to draw or model something does not give you the ability to understand materials or manufacturing processes and the constrains they impose on the design.
@@johnbrown6189 Well, with 40 years in the engineering field, you should know that today drafters are way more diverse and take on a lot more responsibilities and challenges than back on the days. We have, and continue getting, "drafters" that can design, run calcs, run stress analysis, understand mechanical and structural loads and applications, etc, etc, etc. Engineers are freeing some of their time so they can invest it on things that we can't do.
@@johnbrown6189 Check out the arrogance on that - "I am not wrong", okay pal, sure thing.
I don’t charge an hourly rate. I charge $3-5k per job based on the results. I don’t provide a design service. I provide a route to manufacture…it’s all the mindset
so nice
what happen when you woke up??? ahahah
When I first started university, I was the dumbest at CAD and I used to ask my lecturers at college “how is this related to my field of engineering which is aerospace engineering?” And today I understand the value of solidworks designing in every engineering industry and it is now my favorite subject and topic to work with 👍🏻
you asked why solidworks was related to aerospace engineering?
you know it now, that's the most important thing
I also study aerospace engineering and I just downloaded solidworks. It's a nice comment to see
@@flborges I’m glad you liked it. It’s my favorite and dream engineering field. 👍🏻
Catia is better for Aerospace field, but keep up bro
I also study Aerospace Engineering
I just did my first job, very basic for $50/hr. I charged for 3 hours when my design ultimately took about 5. I think it’s ok to have a lower hourly rate and eat some cost if you are new to modeling- it’s a real world test that gives you practice and makes you better, and you get paid for something you would’ve been practicing anyway!
Daniel Crawford ..can u please give me idea of freelancing jobs
How skilled are you?
@@with-Aryan I'm completed my diploma in mechanical engg work at R & D testing...& Validation ...
@@mukeshkumar-lm7mh how good are you at SOLIDWORKS and do you know any GD&T?
@@with-Aryan Hello do you teach in your course any GD&T?
Watch my 1-Hour free webinar if you are a beginner here >> pages.solidworkstutorials.net/comments
I tried Upwork a few times, but the ratio of good clients to complete novice time wasters with no cash was really bad. Not to mention that most of the time I was fighting for work against India and Pakistan.
So the clients had really cheap expectations on what it would cost and my competition was cheap too. It was a no win situation. Spent most of my time sifting thru bullshit jobs to find 1 in 50 "ok" clients.
I started at $50 an hour but dropped it to $40 and would often have to do a quick model to show the client I could really do the job in order to even get a reply from them.
My experience with it really sucked.
Then don't compete there. DOnt bring your price down if you are good
@@with-Aryan Where would you suggest to advertise?
Matt, my experience on the other side is exactly the same. I've tried scouring through the upwork contractors as I've had people want to charge 50hrs for a part I can do in 2. I'm still looking for someone to contract reproduce drawings or reverse engineer from parts if you're still looking for side work.
@@sinfulcoin what kind of parts are you recreating? I’ve got a full time gig but looking for some side work as well.
@@with-Aryan if we can't compete there, where can w then ?😢
20 Years experience and I charge 225 per hour. I have designed parts and assemblies for Schlage, Alarm Lock, DEX, Ingersoll Rand, The U.S. Navy, General Dynamics, Pratt and Whitney, and so on. I have personally designed all of the washing machines and dryers for the Navy surface ships and submarines, powder metal tooling, blow mold machines and molds, Rolling Mills, Draw Benches, Wire Payoffs and Take ups, Spring coiling machinery, production lines for assembly of various products, electronic locking devices and multi point panic bar assemblies.
Legend! What are you up to now?
I made my computer investment and I don't want to work connected to a place anymore.
I have been using solidworks for 20 years and I appreciate you very much.
I am sure that I can earn much more on these platforms than I can earn in the country I live in, but I have a handicap to keep my hourly wage low.
If only I could be visible. I can help people from all over the world and earn money
For everyone who is going to run straight to their computers after watching this and start an account in a freelancing website expecting to make money: Finding a project as a beginner freelancer is one of the hardest things to do on earth from my personal experience. Believe me, it is very very very very hard. I am person who tried a lot of stuff to do freelance (not just CAD design) for almost 3 years while I lived in 2 different continents, and I could not find a single job, other than some fake guys who tried to get free service from me.
So before you try this, keep in mind that it can take ages to start with something as a freelancer!!
Very well said
be careful with these service seekers, sometime they just post a job, just to get an interview with you. just enough to get an idea on how it can be done. before doing by themselves
exactly, people dont get it there are million people from India, China , Bangladesh who work for 5 dollar per hour. also, you need to have relebvant experience at industry and references
You are right! Don't sell ourselves Cheap! Thank You for Inspiring! All the Best to you and your Channel!🤗🤗🤗
Thanks
Man some guys are so good. I passed the CSWA but I don’t think I could make that faucet yet. Becoming an expert in Solidworks takes a lot of practice.
It does and if you have the right mentor you’ll get there much faster
hey it'd be nice to get your thoughts on the exam itself, I've done a handful of tutorials but it'd be cool to share experiences sometime
@@randomness4272 I took and passed the CSWA with a perfect score in my Freshman or Sophomore year of college. The exam is okay, but honestly a lot of hiring managers I've spoken to are not overly impressed with the skill set that the CSWA requires. For example: you're not necessarily going to understand the need for hole wizard features, patterning features, etc. but those are critical for efficient and functional modeling. It also doesn't really give you more "expensive" skills like surface modeling (worth looking into if you want to do consumer product design), sheet metal design, design for plastic injection manufacturing, etc.
Honestly I would look into getting skilled at Solidworks and aiming for the professional certification instead.
I did autoCAD back in the university, it was one of my favorite courses.
Now because of Job market I want to specify in SOLIDWORKS and Fusion 360, possibly would love to learn ANSYS DISCOVERY too.
What's your take on that. Is it possible I can be doing or learning all at the same?
Please suggest and guide me
because solidworks doesnt make parts... YOU DO!@@Satchel456
More Modeling competitions would be something I’d definitely watch
I’ll consider it
Wanted to be part of it.🤗🤗🤗
I recently joined the solidworks model mania this year and sadly, I lost. Forgot to hollow out a certain area of the object and missed the correct mass by a large number.
How to INCREASE your hourly rate ▶ ua-cam.com/video/hWpZdAMBWeU/v-deo.html
Sir, would you Please upload this model designing video. That will be very useful.
I'd take another point off the expensive one because the spiral didn't go up into the curved part.
I have 8 year experience as a fitter/welder & sheet metal former. 7 years experience on AutoCAD, learnt the basics from UA-cam in my own time on LT then transitioned to 3d within 6 months. Currently employed full time making $48 p/h. Role includes site measuring, drafting shop drawings, installation drawings & the occasional render (for high end clients). Having a fabrication background definitely made my transition to cad easier as I know how to fabricate/install 90% of the products I’m designing.
who are your clients?
@@with-Aryan around 80% commercial & 20% residential customers
@@jacobYaaa you have low per hour rate
For my internship I was paid $20 an hour for modeling components for my work's hardware library. I now make $40 an hour doing CAD modeling and drawings with GD&T. Every part I model needs a drawing and every drawing has GD&T. I do not do freelance work but I am potentially interested in doing it in the future. At work I use PTC's Creo Parametric but if I was doing freelance work I would probably want to use SOLIDWORKS because I like the software more than Creo and the license is cheaper.
In india i am getting paid 15$ per day😅and it's above average....
for 8 hours of work?!
you are charging too low. Where you located?
I also have 10+ years using Creo, teaching it and setting up the configs and templates. But in the last 2 years I have been using Onshape more regularly and it is very similar to Solidworks but completely cloud based with built in PDM
Buddy Can you help me for solidworks freelansing ? I have a 7 years of work experience in solidworks .
Solidworks is a tool. Like a pen. Knowing how to use it, cool. Knowing how to design something and find technical solution that are valid and go on an improvment process on engineering point of view is what is valuable. Have technical and engineering knowledge; Solidworks or any other CAD software knowledge alone is nothing.
I agree, that's why I just uploaded a new video yesterday and explained that
I was doing gating design in solidworks, transferring it to inspire cast for solidification for solidification models. I was paid 17.50hr asked for a raise, got 50k only 40hrs. Then I started learning the faro quantum arm for dementions. They never offered me training for the scanner and I almost had it figured out after a couple projects. They wanted me to train someone and after telling them I want more money if my duties keep growing and I got fired.
This happens in our field buddy. Sorry to hear it. Ive trained a replacement before too.
could you explain more what those terms mean? inspire cast and solidification?
Inspire cast is a software that does solidification models. It allows you to set up pour temperature of metals and simulate the pour of casted metals into the designed mold. Inspire cast is made by Altair.
If you are an employee - you get paid around $40 an hour - but your boss bills you out at $140+ per hour.
If you work for yourself, you need to be in the $140 an hour range or you will not cover your costs and your average hourly income will be less than $40 after all expenses and taxes.
The rule is - you should bring in 3x the salary you want to pay yourself.
well said
How do you even get clients??
@@shivanshsharma72hh referrals, use your contacts, family etc. otherwise get a job 1st, then create a client list. If your the best, the clients will look for you. Win awards etc..
@@player1tv oh thank you im currently looking for job
Employees have to pay taxes too.
Hey Aryan, new to you channel and loved the video. The thing I would like in supplementary would be for you to model this your way! You seem to have your shortcuts and ways of making this design, and seeing that would be great.
Thanks for the idea!
Completely agree! I was waiting to see your 250$/hr design. Too bad that you exclude to show your own design.
Hi, I'm a bit new to solidworks, just 2 years of experience, and I was hoping I'd be able to find a job on fiverr or linkedin, do you think it's possible to find a freelance job now?.. or I should wait till I've been able to get CSWP and some certifications to prove my design prowess.
So I was thinking even 250 was way too cheap for a functional design, and got curious when I started thinking about mounting hardware, plumbing fittings, and the aerator. Ended up looking for the original as reference and I was right, 250 is WAY too cheap for this work. I found it for sale in two places, and they're selling these things for 17,413.95 each! With that information, you could probably charge more like 2~5k for a production ready model. Metal 3d printing is expensive, so anyone seriously considering it as an option should have that kind of budget.
Agreed to actually make that work, rather than just a pretty model is totally different.
Couldn't agree more. But don't forget that this was solely a SOLIDWORKS modeling test. None of these models were production-ready and (maybe unfortunately) I didn't define that for them in my request
In which parallel universe are we talking about a production ready model here (in both, the assignment and the results) ?
@@gerdokurt The assignment mentioned the tubes needing to be hollow so water gets through, and "it should work" was part of the request. So I would base my quote on something you could actually mount and run water through.
@@sleepib Bro, tell me how you mount it. I dont see any thread. How does the water goes in the tubes? Where are sealings, the sprayer etc. etc. etc..
This is not a production ready product, its not even a proper design prototype. you can probably print it and arrange it for a small foto...
I wouldnt pay 30 euros for this. A guy in vietnam using freecad or blender does a model like that within an hour.
Experience is what makes you good.
Passion is what fuels the efforts to gain experience. Good education and good tools help you get good faster. I love SW but it is my passion and 20yrs designing stuff that makes me feel like i am good at what i do. If i do say so myself! 💩. By best teachers were my mistakes!
Absolutely
Trying to make $100,000 a year as an industrial designer who freelances is possible, however difficult as there are many who are well versed in part design, assemblies, and surface modeling. You can make much more than $100,000 with Solidworks. Solidworks has a much broader capability. Check out the areas not commonly spoken about. Solidworks Electrical, CAM, Composer, MDB, simulation, motion, plastics, and flow simulation.
Engineering Analysis is a whole field that few speak about and it offers great compensation. Solidworks is a great software with many embedded and 3rd part addins.
Well said!
AutoCad drafter here, charge $100 hr all day every day based in Australia. Drawing mostly 2d As-Builts for Electricians / Fire Services / plumbers etc
Sounds good. Depending on how much know-how and experience you are bringing into your work, you could raise that price. What matters the most in your hourly rate, is the amount of value your client is getting from you. If your 1 hour work eqauls or beats 10 hours of work of an intermediate's, then you should be charging 10x his/her rate
How many times do you have jobs and where do you offer yourself? I am quite good at AutoCAD but I am syuduing but I would like to get some side money.
Thanks.
@@rbasket8 have slowly built up a client base over the years, most of them become repeat customers. The problem with a lot of these companies is they aren't quite big enough to hire a draftsman full time, its cheaper for them to pay me $1000 a month to work on a project here and there, than to hire someone full time. You just need to find these mid sized companies and introduce yourself. The other options is to try searching a online job boards like seek or indeed, find a job listing older than 30 days and ring the company offering your services, we are in a once in a lifetime market where the employee sets the price! All those platforms like fiverr are just a race to the bottom $ wise, you are competing with someone on the other side of the world who would do the job for 1/10th of the price. fuck that. I have an advantage over others as I am very good at what I do, which means if something takes me 1 hour to complete, it would take a regular worker 2-3 hence why I charge 3x the price. Moral of the story here is get out there and do something, nothing is just going to fall into your lap.
@@with-Aryan Exactly! I'm very lucky to have been trained by someone at the top of their game, for instance, a common drawing in my field (not related to my above comment) takes me 1.5 - 2hrs to complete, I know for a fact that it takes draftsman at other companies 8hrs! You can't just walk into a job and start charging that kind of money for something, you have to be good at what you do. Can see from your video here that you know what your doing as well. My advise for any Cad drafters is learn the shortcuts, then customize your keyboard commands. If you're still using the ribbon for everything after a week then you may as well give up and get another job.
Hey Aryan! I'm a CS student, but love sketching precise CA designs and figuring out manufacturing methods. Do you think I can get "my foot in the door" as a non-mechanical engineer? Thanks for your videos - they're great!
Yes, definitely! Definately! You'll find the way, just do it
Hi Sunraii, Most students learn 2 semesters every week 2-4hours the basics. So it's definitely possible.
@@with-Aryan
I'm 3d modeler in solid works I want job
I'd charge a minimum of $120/hr for my time. I currently do automation work for a medical device company where I make automated equipment and fixtures for mass production. I'd say I'm fairly skilled (working in industry for 4 years but working with SW for 8 years). Does that rate sound reasonable at all? Seems like everyone is doing dirt cheap work.
The value you bring to your client through your work should define your rate not just years of experience. Do you do GD&T? Raise your rate. Do you do MDR usability? Raise it. But I'd say you are charging about right for now. Consider increasing it soon
@@with-Aryan I like that. I know I'm a good designer so I'll definitely remind customers that my ingenuity is part of the cost. Definitely do GD&T where needed. No MDR but I also do DFM. Will increase rate when I get my CSWA and CSWP passed. Been wanting to do it for years and you inspired me to do it.
Woah, great video mate!
Thanks a ton!
great advices thank you Aryan and this is my first video to you...best luck bro
Thanks and welcome
Solidworks its just a tool! Im steel designer and I earn sometimes $500/hr and sometimes $250/hr. Because its depend what are you doing. I think im very fast about solidworks workflow, so then its just about your knowledge in the field of your work. I have no fuckin any CSWA or any self-proclaimed titles. Im engineer and do real stuff. SO the most important thing its not how good you are in solidworks but whats your knowledge!!
You are absolutely correct. money is made by engineering not just modeling unrealistic designs
Hi Sir, would you mind if you give me your advice for witch field in solidworks I focus in and follow (most paid) : simulation or workflow or motion...? Because I'm new in this mater.
Thank you in advance
@@soufiane6596 My advice is. Go to the university. (or start somewhere like draftsman....) Learn, listen, be humble and open minded. Listen older engineers with skill (becouse they already struggle with problem and engineeing is constantly struglle and fail.)Today many jobs are highly specialized. I do mostly sheet metal and welding structures.. So its depend. The most overpaid jobs in my field is Static engineer. No problem 10k per month. But this job requires deegre and many experience.
@@lukaskantor2645 Thank you Sir for your speeeeeed answer.
You should have let us watch how you did it. Was looking forward to seeing your process.
I wanted to, but it would be 38 minutes and most people are not patient for that anymore. Slow the video down to 0.25x, does it help?
@@with-Aryan I’m probably more patient than most ppl, appreciate the feedback
Agree
@@with-Aryan Please upload the video. I'm very willing to finish it. Thanks
Thanks for this high quality video it's inspiring!
Hey man! I really love the way you work! There are things that I don't quite understand in what you did. Regarding the first sweep. It disappeared after you made Sketch 8. Is it some feature to do it?
To keep the sweep sketch and making another sweep with it.
I hid it
Great video, first time on your channel and I love what you do
Very inspiring +1
Thanks and welcome
How many other reasons do you need?
@@with-Aryan for ?
I used to work as a solidworks CAD designer in a engineering consultancy firm. They would charge 120$/h to clients for my work
Do you offer any tolerancing, in your drawings? Or taking the manufacturablity into account? because your rate is fair and I want to understand what comes with it if I ordered from you
@@with-Aryan I do invest a lot of time in DFM prior to the modeling, work mostly with surfaces and curvatures (when applicable), and TRY to configure all models geometrically (not always easy😅). I consider myself an average 2D drawer but know my way through geometric dimensioning and tolerancing.
Hello Aryan.
I just finished your excellent 3 month program. Next is the Solidworks Pro certification exam.
Listen, is there any way you could post your 37-minute tutorial on this ?
I'm 100% sure everybody wants to see it. You have become a respected Solidworks guru.
And your team of assistants is top notch
which 37 minute? My mini course?
I think he is talking about this object which is the main sub for the video
@@with-Aryanno, tap water tutorial
This is a trick question. I always say it's $10USD/hr and charge ~$50/design. Even though I have a +5 years of experience and a great portfolio, people freak out with high hourly rates. I would rather do $50 jobs that take me under 20 mins., than having to explain to people why my hourly rate is so high. I tried raising prices to $50 and $150 and didn't get the project in 3 months.
I know I'm good and fast, so I rather get many offers in bulk. They always come back because they know I do geat work, but they never know I work 5x faster than what I tell them.
Good video.
Its all about turnover, do what works for you. getting booked is the goal.
Aryan, do you know about the feature bounding box in SolidWorks? It's a very helpful tool. Especially when it comes to preparing models to be 3D printed as most service bureaus charge by the bounding volume of whatever you want to print. Both designs were pretty lame, actually. Before you showed the time lapse of your work, I was thinking, "I would model it straight an then use the Flex command."
I don't! I have to look it up. IF you have a link for it, post it here. But no, the first model, despite its off limit dim. Was done well.
Yeah, took me also by surprise he didn't use Bounding Box... :P But truth be told, even Solidworks is so big of a program that no one can truly know all of the functions, and remember that there's a specific function for a niche task you're doing once a year or so.
Hi Aryan, thank you for the informative video - I'm going to try modelling this myself and I'll let you know how I got on. I'll be following more of your videos!
If you do, kindly email it to me, so that I can have a look at it as well.
Graduate from university and having experience with solid works starting with $22 /per . Life is hard.
You could build a strong portfolio and increase your rate alongside with it
I'm currently a 4th year student studying Mechanical Engineering, so I have had pretty decent experience with Solidworks (not an expert). Most likely will be working as a manufacturing engineer as my graduate role. How does one get started on this as a side job? Any courses or things I can do to improve my experience? [Also with CFD and FEA if anyone has any advice]
I’m in the same boat as you man
Graduated a couple years ago with a degree in Mechanical Engineering, my advice for you is to learn a lot more on GD&T and tolerancing. My program only had one class on it, but it has been one of my struggles my first couple years in industry.
Perfectly said
Good question. Look knowing how to model is only the base foundation you must have. But you also need to learn a few complimentary skills on the side such as GD&T, learning a bit about manufacturing process because they are the deciding factor on your modeling. Also, building a portfolio would act like your marketing side which you badly need to create authority.
@@with-Aryan what does "GD/T" mean ?
Modelling is easy, its producing a decent drawing to the relevant standards which is a skill and using the correct GD&T.
Boom
For sure. Lots of 3D modellers around but very few real design draftsmen
Usefull information, well done, thanks :)
Glad you enjoyed it!
Video is 11 minutes long. I have already figured out how to manufacture this in that time. Modeling is easy, modelling for manufacture takes longer. I may make some of these and sell....
Glad it helped
Nice challenge ! I dont usually try crazy stuff but i feel id be able to make one
Go for it!
What is the best way/first steps to get into creating models/technical drawings working for yourself? I currently work as a design engineer, producing models/drawings for manufacturing, or DFM using geometric tolerancing using SolidEdge, although I have used SolidWorks as well, and would like to start small producing models/drawings for customers in my spare time and see where it leads.
find a good mentor and follow their instructions perfectly. Practice along the way and never stop trying new ways.
It would be fair to show your work on this model to the public so that everyone understands the level of your skill, and not empty words. But thanks for the video, it was very interesting!
hmm, here's my dilema. If I upload a 40 min long video just modeling one object, that video won't be watched at all. But it still takes a huge amount of time and money from me. So sometimes, even though I want to post something, it's effort to it's reward is so high that it makes me procrastinate or move on in general from that idea
Another Great vídeo
Learning a little bit more watching your vídeos.
Glad to hear that
One of the best thing i watch is ''Do'nt sell yourself cheap''
Thank you! Made my day
Hi aryan, currently in my last year of college. I have 3 years of experience with solidworks. After this 'course' im gonna study further for like another 4 years of mechanical engineering/solidworks. Would u suggest me to already start doing jobs? or just start practicing more for better, and complexer work etc.
Start already
Start doing jobs mate. Learn quicker that way.
excellent video, ignore the haters !!
Always!
I worked 15 years with solid works now.
I'm a mechanical engineer we design special machines mostly for automotive industry here in Germany. Unfortunately I don't get a 100k/year 😅
I've been an employee too and I too live in Germany. I understand. You could use your creativity to think outside the box and design a machine with the knowledge you have and use the connections from your current work to maybe start a company?
I love the part, its beautiful! One can't go around making it beautiful and functional at the same time without putting a lot thought in the design. One thing that bugs me though, how can this be produced in real life, 3D printing?
It can be 3D printed in a soft plastic and put it in a forge that replace the 3d print with metal. Like most of jewery was make but using plastic instead of wax. Tha hard part is to get the metal polished.
@@felipetesta
You have a point. But do not forget that the twists in the faucet are also the water flow channels and they criss-cross one another. Polishing isn't that big of a problem, tumbling in fine sand or magnetic polishing will do.
@@autojando7223 yeah, it wont be easy to manufacture at all hahaha
Yes, 3D printing would be the way for this model
we can use injection molding as a manufacturing process , because there is no important pressor in the channels , and to solve the problem of the channels we can use a model have the form of the channels that will be eliminate by a chemical reaction after ejecting the part from the mold.
7:52 what shortcut do you use for that? Ctrl+tab?
If you need switching the windows then yes
@@with-Aryan thanks!
To start your SOLIDWORKS journey >> ua-cam.com/video/VMVytWUt5S0/v-deo.html
Seems really challenging design! Is there a video showing how to make it "the right way", I mean nice and fluent shape, perfectly aligned and hollow inner-tubes etc..?
Not yet! there is no "right way". there are good ways and bad ways.
@@with-Aryan this is why I used the quotes.
how does one become so good with solid works...how long does one need to learn to become a cad jock that can draw anything like you? great stuff!
Depends on the route you take. There are slower ways and faster ways and it all depends on you and your level of practice. Check my course it's the fastest way courses.solidworkstutorials.net/
Great topic, thanks 👍
Glad you liked it!
Thank you, it works perfect!
You're welcome!
Jeez went to check out the pricing on the software after watching this video to see if I could apply my blender experience into SOLIDWORKS and for the price of the software and fees I would hope freelancers are charging more than $250. Are there any alternatives to get started in the SOLIDWORKS ecosystem?
Yes! Student discount, entrepreneur discount, my discount if you enroll in my course, aviation discount. You have to find the best option for you.
My price is 62.50 an hour. I have a bachelor in Product Engineering(IPD). But I mostly do constructional drawings for small bridges,and machine design. I didnt start long ago but have been using Solidworks/edge since I was 12. I think its a cheap and fair price.
more experience, more hourly rate. Watch my other video on how to increase your hourly rate
nice video sir, i really confuse where i must to start to make some money
Start by building a portfolio first
I am currently unemployed, back when I was in college I was good at SolidWorks and hope to earn something from what I am passionate about hehe.
first, start polishing your skills. I'm sure the rest will follow
sir, i am working on solid works and creo (PTC) last 10 years but I didn't earn a single penny online sir kindly teach me how to earn money online
it's not something I can answer to you as a comment. I'll look into it.
I do 3D Design in Solidworks and also 3D printing at $50/hr. Probably a bit low but just started this as my side hustle at the start of 2022.
you can gradually add to your rate by increasing your skill. I made a new video after this in which I explain how you can do that
How well is it going?
@@madbull4666 I have a few reoccurring clients that will give me jobs. Still my side hustle for sure.
Great video. Im working towards my CSWP currently. Can you post the full video for how you made the faucet?
not any time soon because I have some lined up
best of luck. You won't need such complex designs for your CSWP
I liked this content, I've always asked for videos on how to get jobs
Glad to hear
Hi Aryan, I'm a student of Mechanical Engineering, I've used SolidWorks for 2-3 years in university and about 1.5 years at my internship. How can I get into freelancing and what would be a good rate if I'm not confident in modelling complex things? Great video as always!
The most important thing to work on first is a portfolio, go ahead and browser other Top portfolios on the same freelancing sights, and try and replicate them. Another thing that helps come up with a cost is just focus on an hourly rate, all you have to do now is just check how many hours it will take you to finish a gig. With practice all of this will become second nature.
On the second one, the water wouldn't flow through. Because the spirals are separate hollow entities, where they cross, the outside of the shape blocks the hollow inner path.
exactly! that's why it lost more points
Dadash man france zendegi mikonam va karam mohandesi mecanique. Che maraheli ro baraye peyda kardane moshtari bayad tey konam?
Portfolio dari?
@@with-Aryan rooye upwork daram. Be joz oun bayad chejouri dorost konam? Site bezanam?
I really enjoyed watching this. Makes me want to do some challenges
Bring it on
I am an electrician and I would like to learn solidworks. Would it be much relevant because I fell in love with it.
Good day John, It depends what you want to do with it, you can make CAD your side hustle, or use it for your day job as well, using it to design electrical boxes, and visualize how things will fit, and even run thermal analysis if needed.
ممنونم بابت ویدیو خوبتون
Merci az shoma
I like your content man, which website you usually post your designs? I do design as well but, I don’t know how to sell it 😂✌️
Thanks. I don't sell my designs
hello @aryan, I have experience of Solidworks CAD of more than 10 years and I have produced Full machines using SW, the machines where Bill of material is so large that it needs an ERP system and team of atleast 20 people to manufacture the machine within timeline. I have tried upwork but I had to lower my rate to 30$ to atleast land a few jobs. On top of that, I have done much more complex work then I can find on upwork. I mean I have literally designed machine from scratch to physical machine that sells in more than 500,000$. I am at a stage where I don't know how to find the correct client that has requirement of such high skills. Can you please help and guide on what to do and how to keep my company working?
where do you usually look for clients? country, market etc?
salam Aryan jan. Babat video khobet tashakor mikonam.
Ye soal dashtam agar zahmati nist rahnamaiim kon aziz.
aya kharid account upwork (validate shode + paypal validate shode ,....) az servic dahandehaye irani khobe bara ma Irania??
salam, bebin be bank to iran ke nemitooni vasl koni, bara hamin az iran javab nemide rastesho begam
Where is the video of you creating this model?
Didn’t upload it
$65/hr, CSWA level- offering Design coupled with CNC programming, went out on my own after being in the Auto Mfg Engineering field for 20 yrs. SW is my first modeling software, always been a 2D autocad guy. Work is slowly picking up on the design side of things, as I get more jobs under my belt, I see good things coming.
If you know your tolerances too, I wouldn't go below $80.
@@with-Aryan you keep mentioning knowing tolerances and DFM. I’m not in the freelance world, but I am a daily solidworks user in a manufacturing/R&D role. I couldn’t imagine drawing anything up without regard to DFM. People really do that?
Maybe im tripping... but i think the photo of the tap actually has a transparent tube in the middle for the water to flow through.
you are trippin
لو انا بعرف اشتغل كاد كويس بس انا معنديش خبرة وعاوز اكون خبرة فى كورسات فى حاجه اقدر اعملها
Hello Friend,
I live in Nigeria and I have been working with solidworks for awhile but I want to start making money with it as a side business. Please could you show me how to set up the right and profitable way.
Thank you
Step 1: Master it!
how good are you with it?
@@with-AryanI do okay. Apologies for late reply.
Tricky part was thinking helix, loft, rotate, boolean it all, then shell it out, then bend and defoem shrug. 1hr? Would thin 4 to 5 to get right.
yeah only that :)
@@with-Aryan hum you must be fast AF great advise don't underbid , or underestimate job remember the patent attorney get 7k just to file it! If its not worth $500 model to customer as a product that might spend 100s of thousands to market and make might be worth passing on.
I had one year of SOLIDWORKS in highschool and have been using it past couple months getting used to it again. What should I try to start getting paid for modeling
First build it up again and then, you could try to build a portfolio for yourself. You need to build authority, then you could market yourself
is there a solution in CATIA v5 ?
what do you mean?
@@with-Aryan I mean I want to see a video tutorial in CATIA about how to draw that part. I managed to create the base of the surface, but no way I can do the beak :)
Hey i love your comments and criticism. I just want to ask how else the second guy was meant to hollow the tubes of solid body(combined2) at the areas of intersection of the swept triangle & circle profile? I believe a cut-sweep was the best choice. It is not like he can use shell feature for that since it is a complex geometry. So i look forward to your explanation thanks.
Yes, by the looks of it, he made swept a hollow profile, but there are some intersections. A better way that could work is first add all your material using a sweep and then bore out the internals with a cut sweep.
I'm a mechanical engineer with a lot of experience with SOLIDWORKS. Where is my 200+k per year?
Good question. Where do you work and how much are you asking for your work?
🤣in my experience actual engineers make penies in comparison to an idiot like me that just does programming and 3d design more like a hobby
The Main element to Make that Exercise is Loft, Extrude Boss/Cut, and Reference Plane with Different Angles, the Main Basic to have one Guy with low Price is to gain the Job, he is attracting People by the Low Price, and this Unfortunately, Killing the Market and sells himself with Cheap Price, which is Totally Wrong !
Going back to the other guy with 250$, the guys is ambitious, yes the visual of his work didn't meet your expectations but the way he made the design with, pricing himself with the Work Achieved, made me feel that the Work we do whether it is Right or a Little Bit wrong, is Worth Trying to get it done with training and development, and Definitely the Value of the Output to be done, encourages us to enhance our work and to get better results with more complicated Modeling Design.
It is true that the use of loft, extrude boss/cut, and reference planes are essential elements in creating the design shown in the video. And while it may be tempting to offer low prices to attract customers, it is important to value your work and expertise appropriately to sustain a healthy market. As for the $250 designer, it is commendable that he is ambitious and willing to learn and develop his skills. With training and practice, he can definitely improve and produce better results in his designs.
@@with-Aryan can't agree more 🙏👌👌
99% of people listed there price around 50$ need to be very careful. There are law firms fishing around and looking for people that are using pirated license and if there charging $50 an hour. It’s a good sign that you’re not paying for your solid works license. Just an FYI.
oh that's a good point. Assuming you have the proper license not any other way
Is that actually true though? Or a myth?
Do you know how to prevent instable sketches (without moving to wireframes)? By instable I mean : Flipping arcs, flipping dimensions from negative to positive, or relations that break for no reproducable reason, etc..
Yes, proper usage of constrained construction lines
he said it
Don't believe me, that's your choice. One I might share that, until then, you are entitled to your believes
Earning $100k in the Seattle area will get you a basic apartment. This wage seemed amazing before I moved somewhere that a small condo cost upwards of $500k... Maybe if you earned this in Ohio you'd be doing amazing.
West coast! Prices are rising there, aren't they?
درود
داداش این موزیک خیلی عصاب خورد کن هست با اینکه برام خیلی مطلب مهم بود ولی تا دقیقه ۴ را بیشتر نتونستم تحمل کنم😞اصلا استراتژی استفاده از موزیک را من در ویدیو آموزشی متوجه نمیشم 🤔و از موزیک های لایت و ریلکس می تونی استفاده کنی
Thanks for the feedback and watching my videos dawsh
Hey Man, after i saw this i was so frustrated... I have an CSWP certificate and have been working for almost 3 years locally on mechanical design using Solidworks. I live in Colombia and here the workforce is very cheap compared to what you are charging, an hourly rate of barely 10USD is expensive in the industry here... I realized I've been doing it all wrong but I dont really know any of these freelance platforms and after watching this I'm convinced I should start. Could anyone recommend a freelance platform so that I can start working my way up? And also, what should the hourly rate be?
Fiverr and Upwork
Nicolas, estudiaste algo para realizar los modelos? Me refiero a una ingenieria o algo de universidad? Ya que me voy a decantar por el modelaje 3d, modelo desde hace años, pero quiero enforcarme en SolidWorks, pero no he hecho ningun estudio en base de esto.
@@MrBroguiKLM hola, si, soy ingeniero Mecánico y estoy trabajando en diseño de producto hace 3 años... Digamos que el tema de modelaje 3D depende mucho de que tipo de pieza quieras hacer... Si lo que quieres es copiar formas existentes o crear formas propias en modelos 3d la habilidad requerida es más bien "artesanal" y no requiere de mucho estudio técnico ya que tiene que ver mucho más con tu dominio del programa y tu capacidad para visualizar y replicar formas, eso es más experiencia que otra cosa. Por otro lado, si lo que quieres es trabajar en una compañía o para alguien que te entregue planos o que te vaya a solicitar planos específicos con medidas o que te soliciten hacer piezas funcionales para máquinas, requieres de una capacitación mucho más específica... Lo que yo hago es diseño mecánico y conceptual apoyado en modelaje 3d, pero el modelado para temas virtuales como gaming, publicidad e incluso para impresión 3d en muchos casos, no requiere de mayor preparación académica, es más experiencia y práctica. Saludos!
Thanks sir this make me to be powerfull to Skecth in Solidworks ❤️👍👍👍👍
You are most welcome
Make a details video on each and every steps of designing this same tap which covered every details please.
Alright! I add it to my list
Where do you find and get the freelance work? Employers are very picky.
It all comes to a strong portfolio, start off small even provide complimentary work if you can get a review or a nice looking model to add to your portfolio, its a game-changer when it comes to finding more work.
My hourly pay is 0 since I'm still a student and too broke to get a computer...but damn I genuinely didn't know that SOLIDWORKS paid so well for something that easy. For the body of it you could of just made 1 perfectly then used a radial array (X3)
it will soon change
Passed the cswa and I have a lot of experience in solidworks but I’ve never really quite seen anything like this
CSWP is not the end of the way, there is always room to learn more
Exactly!, can’t wait to start trying things like this
Hi....am just a beginner in solidworks.......how much time would took me to be an expert?......
And perhaps.......am a student
Depends on the route you'll take to learn it! Some ways are faster, and some take waaaaay longer. Usually if you invest in the right course, you could shorten that time enormously. But the normal time on your own, to be a true professional, multiple years
@@with-Aryan thanks man....hope I can hold on to u ?
If you strating with 0 reviews. Is a low price a good idea to get costumers. And later on raise the price.
That'd be YOUR marketing strategy but it would be a bad one. No, don't do that. First learn your value, then start asking the right money for it. Don't do that
When I started on Upwork in 2020 my hourly rate kept getting as low as 7 $/h for my first job then I kept raising it to 40 and when there is competition I drop it to 25 .Now planning to settle on 50 $/h
it gets better with the more clients and successful jobs you finish but at first you will have to sacrifice a little.