Same here but I only have experience with steel. That weld test is gonna suck for me. Wonder if I offer a low pay rate for hire as collateral till I'm up to par with quantity will help.
Welders need more aluminum mig videos with both different wires 4043 and 5356 !! Big difference when welding and also with different mig welding guns… welded aluminum tank trailers and I won’t lie I burn thru before but also as you get better you learn to control your wire speed/ voltage…. This gun made aluminum welding look sooo easy since it is great machine but definitely most spool guns don’t run like that ! Great job to Jordan tho clean welds
I would love to see and know more of the aluminum pulse mig welding with more longer form explanation of the machine and process for us slow learner. Like the conventional vs profiles and setting choices Is there anywhere I can find more more info to read and watch. I do use some like these everyday for 8 to 10hr in fab ... just self taught though.
Couple things, could you clean the ceramic off the root so we can see the penetration. Also, I cannot find ANYTHING in regards to ceramic backing for aluminum mig in 2G position. My 3G plate came out nice. My 2G plate has undercut on the upper toe in back but the bottom toe is clean with good fusion. Is it my angle or heat? .035" spool WFS -500, V- 21
Nice welds, Wishing to learn all the settings on that feeder , I’m currently welding aluminum with a mpa350 and a older alumna pro feeder, we’re always fighting with porosity on the welds , can’t get the machine to rurn right ..
Excuse me guys I've only started my 2nd year Apprenticeship, on the Aluminium MIG process, what kind/type of wire is usually used please? I'm already Coded MIG (Flux core) and Stick 3G.
Usually 5k wore when doing migaluminum unless your anodizing and don’t want two color tones or it calls for a specific series. In my experience 4K and 5k are most common.
Hiring? I'm a TIG welder mainly but have been working on my MIG abilities the past few years and that's easy welding lol... serious about the Hiring thing. I'm a wisco resident also.... hit me back?
althuogh i dont like aluminium, excellent job... AND i missed that multimedia welding artwork with music - 3:03 - awesome job Mr Videomaker! (ua-cam.com/video/dkZLWrGB7m4/v-deo.html)
👇WeldTube Store👇
www.weldlife.com
Thx bro. Got a weld test tomorrow we need more guys like y'all
Same here but I only have experience with steel. That weld test is gonna suck for me. Wonder if I offer a low pay rate for hire as collateral till I'm up to par with quantity will help.
@@gundam42d64did u end up getting the job?
I would love to see more welds done with this process
Saaame
Nice!! Loving the wire speed control and swivel ball on the gun
Good video! Nice to see pulse mig aluminum.
Welders need more aluminum mig videos with both different wires 4043 and 5356 !! Big difference when welding and also with different mig welding guns… welded aluminum tank trailers and I won’t lie I burn thru before but also as you get better you learn to control your wire speed/ voltage…. This gun made aluminum welding look sooo easy since it is great machine but definitely most spool guns don’t run like that !
Great job to Jordan tho clean welds
Agreed when I’m in shop making repairs I have a push pull when I’m doing full hull repairs out of town I have a spool gun runs completely different
best conditions, best settings and best prep. 3 things makes ur weld is good
The 3 things that make you a good welder is consistency consistency consistency
Would love to see more mig aluminum!!!
Mig Aluminum fabrication?! Wow.
@@weldtube Mig for Alumunium hollow
This is all I do but it's pipe fitting. Irrigation
When you put the root in, is it like with flux? Was it just a stringer with a wiggle?
I would love to see and know more of the aluminum pulse mig welding with more longer form explanation of the machine and process for us slow learner.
Like the conventional vs profiles and setting choices
Is there anywhere I can find more more info to read and watch.
I do use some like these everyday for 8 to 10hr in fab ... just self taught though.
Que bueno seria que estos videos tan interesantes pudieran ser traducidos para todos los hispanos gracias
Si que agan 2 videos uno en english y en español.
Amigos. Si nos gustaria. Por lo tanto no tenemos el tiempo suficiente. Pero pronto esperamos que si!
O que por lo menos tambien los traduscan asi como en voice over tambien. Pero no hay problema . Solo veo las tecnicas que usen y los aguestes.
@@nelson442 Simon. A si lo queremos hacer el mismo video con narración y subtítulos en español.
No speek english please sub spanish please.
God video👏👏👌
How did y’all trick me into wanting to mig aluminum? Great vid and clean welds 👌
Couple things, could you clean the ceramic off the root so we can see the penetration. Also, I cannot find ANYTHING in regards to ceramic backing for aluminum mig in 2G position.
My 3G plate came out nice. My 2G plate has undercut on the upper toe in back but the bottom toe is clean with good fusion. Is it my angle or heat?
.035" spool
WFS -500,
V- 21
It looked like you had some heat distortion warp the plates inward. If not, I stand corrected; if so, how would you have avoided this?
So nice! That equipment! Nice work!
hi i'm a welding inspector trainee , i like your Chanel love to see more vid
Was that the actual speed he was going or was the video fast forwarded to make it look that fast?
Are you running stringers for the cap or did you weave ?
that wire speed feed speed control is insane
Is it true that tig welding stainless steel is the same as carbon steel but with just stainless you just gotta purge it
Yeahhhh very good job 💪🏻👨🏼🏭🧑🏼🏭
How to bend Aluminum for the test? and at what temperature to bend?
Are you running straight beads or are you weaving? 😊
A slight wiggle in the stringer will help fusion. _Slight_
I run the hobart 4043, low silicon, 035 and 045. Aluminum casting. Runs dirty, but you brush it, stacking dimes all day
3/32 not a gap . What kind gas you used it ?
Nice welds, Wishing to learn all the settings on that feeder , I’m currently welding aluminum with a mpa350 and a older alumna pro feeder, we’re always fighting with porosity on the welds , can’t get the machine to rurn right ..
What gas are you using ?
Did you speed up the weldout or did he really just pour that joint in like 30 seconds?
Thats how fast it was! It was difficult to keep up with the cam!
Yup. That’s aluminum for ya. Gotta move fast or you’ll drip or blow thru
Question on the crater fill...is that set for when you let of trigger?
Yes
Could you guys add in a tie in video with aluminum spool.
Excuse me guys I've only started my 2nd year Apprenticeship, on the Aluminium MIG process, what kind/type of wire is usually used please? I'm already Coded MIG (Flux core) and Stick 3G.
Usually 5k wore when doing migaluminum unless your anodizing and don’t want two color tones or it calls for a specific series. In my experience 4K and 5k are most common.
3/64
That is awesome!
Good sir are you use argon gas please tell me👌
Yes aluminum uses argon to weld.
Good job
I've been welding aluminum ships for 14 years. Let me know when you wanna see some dimes. 😂
Hi guys, can i conect this aluminum suitcase to a generator ?
Hiring? I'm a TIG welder mainly but have been working on my MIG abilities the past few years and that's easy welding lol... serious about the Hiring thing. I'm a wisco resident also.... hit me back?
Love to see any of these vids in real world scenarios like on your back around a bunch of stuff instead of a plate anyone could do
👇Learn more about Miller XR-AlumaFeed Suitcase Wire Feeder👇
www.millerwelds.com/accessories/wire-feeders/xr-alumafeedsuitcase-wire-feeder-m00338
Nice weld 😎👍😎
Dominic repoblec 🧡
Hi
Y u using ceramic in back side
Good welder
Good
Nice toy 😱
No mask with aluminum is crazy
No kizzy
1-. Clean with a wire wheel(down hill)
2-. Clean with a brush(uphill)
3-. Fail bend and X-ray test. 🤷🏻♂️
How an earth thick is that plate Try that on 5mm you'd burn though
👍👍
Please weld some aluminum pipe with this.
Yooooo
I'd say it would be no problem on a positioner rolling out.
Ни чего не понятно но очень интересно!
Okay man thank you
هاي مرحبا يا اصديقاء انا ابحث عن عمل انا اعمل في مجال الصناعة الأفران الآلية وفي محامص البزر وعندي خبرة في لحام الارجون هل اجد عمل ما في اي شركة
althuogh i dont like aluminium, excellent job...
AND
i missed that multimedia welding artwork with music - 3:03 - awesome job Mr Videomaker!
(ua-cam.com/video/dkZLWrGB7m4/v-deo.html)
Уменьш подачу проволки, будет лучше. Слишком много брызгов
👍👍👍👍👍👈
Welding is ok but not good enough
Nopodemo enespanol
Welding is ok but not good enough…
Can do better with basic spool gun. No need for pulse electronics, or ridiculous suitcase expense that will need repair, or replace in 5 years.
Terrible arc shots
Your walling is not beautiful, inshallah my walling is more beautiful
U-LOO-MIN-OOM…..