Hi, if I fill the equipment tank with a 40% water-ethylene glycol mixture, will I be able to cool it down to below zero temperature, about -5ºC or -8ºC?
Hi, I have the 5000 type. The chiller keeps beeping from time to time, so I cleaned the filters and changed the water. The temperature is still high. I have the chiller for 4 years. What type of refrigerant is for this type of chiller? Thank you!
Need some help. I am having 5000 and there is a problem. Normal light is off. Alarm light is on and alarm buzzer is ringing all the time. Thermostat gets on and off after a while. Kindly guide me and solve my problem. Thanks
are you asking if we have information on cw-3000 series chillers? we do here: support.thunderlaserusa.com/support/solutions/articles/65000167053-s-a-cw-3000-passive-chiller-user-manual
The Best Working Temperature 10-35℃ ≤0℃:Pour ethyl alcohol into the water chiller not more than1/4 of the chiller’s volume. pls till me if this ok or not?????
Hi, if I fill the equipment tank with a 40% water-ethylene glycol mixture, will I be able to cool it down to below zero temperature, about -5ºC or -8ºC?
My alram keeps going off for reasons unknown to me. Could you please help me figure this out.
Sir I setting this same my password was 6 I set same f3 set and 0 and set than Rst finished it. Is correct ? What temp setting this mode ?
Hi, I have the 5000 type. The chiller keeps beeping from time to time, so I cleaned the filters and changed the water. The temperature is still high. I have the chiller for 4 years. What type of refrigerant is for this type of chiller? Thank you!
Is it normal to return to intelligent mode after every turn off and on although it changed to constant?
Hi Brian. How can I set it to constant 22 degrees? Am in a hot area. I notice yours was at 25 degree to start with
Hey Tony, reach out to support and we can share an article or you can search it on the Knowledgebase
Need some help. I am having 5000 and there is a problem. Normal light is off. Alarm light is on and alarm buzzer is ringing all the time. Thermostat gets on and off after a while. Kindly guide me and solve my problem. Thanks
support.thunderlaserusa.com/support/solutions/articles/65000174472-chiller-diagnostics-theory-of-operation
You might check your water level.
How to solve high temperature problem.
does the chiller need to be running at all times, like a refrigerator or only when the laser is in use?
the chiller must be on and in a ready state for the laser to operate, but it only goes in to a compression cycle as needed to maintain the temp
AWESOME GAME PLAYING
Cw-3000 industrial chiller
are you asking if we have information on cw-3000 series chillers? we do here: support.thunderlaserusa.com/support/solutions/articles/65000167053-s-a-cw-3000-passive-chiller-user-manual
Hahaha i love random ass comments like this
Are you sure?
The Best Working Temperature 10-35℃
≤0℃:Pour ethyl alcohol into the water chiller not more than1/4 of the chiller’s volume.
pls till me if this ok or not?????
AWESOME GAME PLAYING