Very good instructional video for easy to understand way to determine piston position /stroke to set valve clearance. You speak at a pace slow enough to comprehend things as they're being said and recap at the end. Best video I found on the topic. Thank You.
Thank you.just remember TWO OPEN VALVE which is the intake and exhaust valves and the remaining cylinder is on TOP then apply valve setting.pls.share and subscribe.thank you
Thank you for watching.please subscribe like and share. actually they both the same on how to adjust valve tappet clearance but I will do as per your request.
Some other engine for the automotive is the same with your engine.no need to tune up.thank for watching for my video I hope you learned something.thanks pls.subscribe and share.
hi i have an d950 to an 7100hst kuboto .i have test all i have bleed it i have test so i have a nice fog on my injector but it even want to start no smoke maybe little white smoke and i think the compression is ok ..what to do ...please help me ...
I have seen the valve adjustment for a three cylinder engine how will I it be with a four cylinder engine ? Please let me know especially the v243_combine engines
My yanmar diesel 3t72sb engine will not move the valves like yours does its different when doing the first set of valves sny help will greatly appreciated
Ok...I will teach you.if you don't know the firing order just follow me and I repeat how to set the valve setting rotate your engine to the right and observe the valve.THERE ARE TWO VALVES WILL BE OPEN and remaining cylinder is on the top and apply valve tappet clearance.(TWO VALVES must be FULLY OPEN) example:if the valves from cyli.#1&2 are open the top is cyl.#3. after cyl.3 just rotate again the engine same action of the valve.you can observe the exhaust valve from cyl.#3 to be fully open and you can see the intake valve from other cylinder is also fully open.the remaining one is on the top to apply tappet clearance.The same on next cylinder.ithank you for watching.i hope will.you understand.
For Hinomoto c174(engine toyosha cs100, 3 cylinder) is same?which is clearance for intake valves and exhaust valves?are you selling engine parts for this tractor?
Afternoon sir .....I did put a top gasket on my Kubota ....than it run for about a week but it started to leak oil between the cylinder head and the block again .....does that mean I did not torch it's properly ...or what sir
I have a Yanmar 3 cyl engine that looks very similar. Because there is no spring to hold it, the exhaust valve on cylinder 3 has side to side movement of .032" so the lifter is not always centered on the valve cap. It makes noise and the valve clearance clearance is different if it is moved from one side to the other. Can I shim the gap between the snap ring and the lifter to keep it centered on the valve? If I use a .025 shim, it will leave .007 clearance, is that sufficient?
Boss pano tanggalin impeller ng water pump nyan? Sira na ksi yung bearing sakin. May thread ba ung impeller at shafting nya? O pinipress lng pra matanggal?
Sir paki click n lang po Yong profile picture ng channel ko tapos click mo video at hanapin mo po Kung paano ako magpalit ng bearing ng water pump.salamat sa panood.pls subscribe and share salamat.
@@tractorsmarinemechanic ok sir. Salamat. Nka subscribe ndin ako. San po ba shop nyo? Matanong ko ndin po ano problema pag naghahalo engine oil at transmission oil?
Boss yong sabi mo na two open valves din apply valve clearance na confused ako?saan ka dapat hihinto sa sa pag ikot ng crankshaft mo na masasabi na tama na e adjust yong remaining cylinder?
dalawang valve Ang mag open,Isang INTAKE VALVE at Isang EXHAUST VALVE at Ang natitirang cylinder ay Ang naka top at mag mag apply kn ng valve setting.hihinto k hangang bumaon Ang valve.
Magaling sir nagets ko na din kse sa tatay ko tumitingin lng ako hndi ko makuha kung pano nya itune up ang d850 namin tinatanggal nya ang glow plug at tinatapat nya sa butas ang daliri nya di ko din sure kung tama ba yon...slmat sa tutorial sir
Very good instructional video for easy to understand way to determine piston position /stroke to set valve clearance. You speak at a pace slow enough to comprehend things as they're being said and recap at the end. Best video I found on the topic. Thank You.
Thank you for your comments and watching. please subscribe,share and hits like.thank you.
Thank u for putting video out there best understanding video ever
Thank you.please like,share and subscribe.
How do you replace valve seals without the valves dropping down on the pistion chamber
I appreciate your repetition. It helped me learn how to do this for the first time.
Thank you.just remember TWO OPEN VALVE which is the intake and exhaust valves and the remaining cylinder is on TOP then apply valve setting.pls.share and subscribe.thank you
Awesome and clear video just waiting for it starting
Thank you for watching
Instructions very clear well explained
Thank you for watching.subscribe,share,and like.also follow my fb tractors and marine mechanic.ty
Amazing video. I don't have the owners manual, so what should I set my intake and exhaust clearances at on a Daihatsu dm 700G gas engine?
Please like and share....thank you
Nice tutorial sir. Thanks a lot
Liked your video. Any tutorial for the yanmar 2gm?
Thanks from France. Very interesting.
Pls share it and thank you for watching.
Beautiful teaching I like this bro
Kindly share and like...thank you.
what a great chanel. hello from AU
Thank for watching.what is AU?
Could you show How to adjust valves on Mitsubishi MT14D ? Thank 🙏
Thank you for watching.please subscribe like and share. actually they both the same on how to adjust valve tappet clearance but I will do as per your request.
Great videos! My engine does not have the nut and screw to adjust the tappets can you tell me what to do in this instance please
Some other engine for the automotive is the same with your engine.no need to tune up.thank for watching for my video I hope you learned something.thanks pls.subscribe and share.
Super bro thanks and congrats very good works bro
Thank you for watching
You sir are a legend 👍🏼
Boss discuss the running mate of firing order of 3 cylinder engine
Awesome tip! Many thanks for your video!
Thank you for watching
Just subscribed. Looking forward to learning more from you
Thank you and also for watching
hi i have an d950 to an 7100hst kuboto .i have test all i have bleed it i have test so i have a nice fog on my injector but it even want to start no smoke maybe little white smoke and i think the compression is ok ..what to do ...please help me ...
Just subscribed! Thank you very much!
Salamat.
I have seen the valve adjustment for a three cylinder engine how will I it be with a four cylinder engine ? Please let me know especially the v243_combine engines
ua-cam.com/video/8nN16A63xd4/v-deo.html
Please try to watch at the above videos.
My yanmar diesel 3t72sb engine will not move the valves like yours does its different when doing the first set of valves sny help will greatly appreciated
What do you mean ?YANMAR engine is different from Kubota.
@@tractorsmarinemechanic when I go to set the number 1 cylinder the 3 and 6 valve don't open
Ok...I will teach you.if you don't know the firing order just follow me and I repeat how to set the valve setting rotate your engine to the right and observe the valve.THERE ARE TWO VALVES WILL BE OPEN and remaining cylinder is on the top and apply valve tappet clearance.(TWO VALVES must be FULLY OPEN) example:if the valves from cyli.#1&2 are open the top is cyl.#3. after cyl.3 just rotate again the engine same action of the valve.you can observe the exhaust valve from cyl.#3 to be fully open and you can see the intake valve from other cylinder is also fully open.the remaining one is on the top to apply tappet clearance.The same on next cylinder.ithank you for watching.i hope will.you understand.
Great videos.......danke
Boss pwedi b yn i aplay s iseki 3af1?
Boss firing order ng iseki 3af1
keep up the good work sir
Salamat.
For Hinomoto c174(engine toyosha cs100, 3 cylinder) is same?which is clearance for intake valves and exhaust valves?are you selling engine parts for this tractor?
Same...I'm just a mechanic I do not selling engine or parts.thank you for watching
@@tractorsmarinemechanic thanks.what is the clearance for the valves?
Hi, my tractor iseki 237 landhope have motor isuzu e3ag1 1,429l and how tappet clearance for that engine. Thanks.
Thank for watching. Just applied o.14 in your feeler gauge.
Pls.subscribe and share. thank you
good job brather
Thank you for watching.please subscribe,share and also hits like.salamat
Thank you
Kindly share and like .thank you for watching
@tractorsmarinemechanic .Boss I need a 16 hp to hook it with a 10 kW. Do you have?. Thank you.
Afternoon sir .....I did put a top gasket on my Kubota ....than it run for about a week but it started to leak oil between the cylinder head and the block again .....does that mean I did not torch it's properly ...or what sir
Yes sir...
@@tractorsmarinemechanic so that mean I can just retorch it again ...
Maybe you dont put the one oring for oil line in cylinder head gasket sir???
Thank you very much
Thank you too for watching.
Boss baka pwede nio gawan ng video pano palitan oilseal ng monroematic ng l1 sunshine?
Alin pong oil seal or saan parte?may mga video n po sa mga sunshine.hapin nyo n lng po sa playlist
Vakve adjustment cool
Thank you bro
Thank you also for watching
Sir parihas ba ang ganyang procedure sa 3 cylinder na deuts
Kahit na anong 3cylinder po
Salamat po sa panonood.pasubscribe nmn po share and like.salamat po
Ok sir salamat
boss pareho lang ba pag tune up ng komatsu 3cylinder pc20 yan
Pareho lng po yn sir.khit n anong URI ng 3cylinder n makina.
I have a Yanmar 3 cyl engine that looks very similar. Because there is no spring to hold it, the exhaust valve on cylinder 3 has side to side movement of .032" so the lifter is not always centered on the valve cap. It makes noise and the valve clearance clearance is different if it is moved from one side to the other. Can I shim the gap between the snap ring and the lifter to keep it centered on the valve? If I use a .025 shim, it will leave .007 clearance, is that sufficient?
Shim or or washer
@@tractorsmarinemechanic Yeah, Shimmed it. Already have 10 hours on it and it's great. Thanks.
what is the size of the master cylinder head bolt moment?
14 mm
What clirens in ,eks master
0.25mm.thank you for watching.please subscribe,share and like.salamat
1501 Kubota sir ano clearance?
Pareho lang po Dyan..25mm lang nilalagay ko
@@tractorsmarinemechanic salamat sir
Enjin 3 t 82 v - n barubu no bakku rasshu. Arigatō
is it the same if the diesel engine is deutz marine diesel engine 3 cylinders?
Same
@@tractorsmarinemechanic Thank you Sir.
Yanmar 3 cylinder .0010 as well and same procedure ?
All 3 cylinder engine is the same procedure
@@tractorsmarinemechanic not quite. My Westerbeke is 1,3,2 firing order. Great video though
Boss pano tanggalin impeller ng water pump nyan? Sira na ksi yung bearing sakin. May thread ba ung impeller at shafting nya? O pinipress lng pra matanggal?
Sir paki click n lang po Yong profile picture ng channel ko tapos click mo video at hanapin mo po Kung paano ako magpalit ng bearing ng water pump.salamat sa panood.pls subscribe and share salamat.
@@tractorsmarinemechanic ok sir. Salamat. Nka subscribe ndin ako. San po ba shop nyo? Matanong ko ndin po ano problema pag naghahalo engine oil at transmission oil?
Sira Ang oil seal ng hydraulic pump mo.
Last na sir, narerepair ba control valve sir pra sa rotovator? Pano masasabi na sira control valve? Gusto ko lng mrestore yung unit ko
Tingnan natin sir Kung sira n b talaga or hindi.saan po loc?
Boss yong sabi mo na two open valves din apply valve clearance na confused ako?saan ka dapat hihinto sa sa pag ikot ng crankshaft mo na masasabi na tama na e adjust yong remaining cylinder?
dalawang valve Ang mag open,Isang INTAKE VALVE at Isang EXHAUST VALVE at Ang natitirang cylinder ay Ang naka top at mag mag apply kn ng valve setting.hihinto k hangang bumaon Ang valve.
Hello po mga sir,,,pwedi po ba magtanong tungkol sa valve tappet clearance intake and exhaust ng D950 Kubota engine 3 cylinder?salamat
Ano po b Ang tanong nyo?
Sir, nagbibinta rin ba kayo ng kubota engine spare parts?
Opo mam.ano po n parts Ang kailangan nyo?
@@tractorsmarinemechanic valve seat for kubota D950 po sir.
@@tractorsmarinemechanic cylinder head for kubota D950 magkanu po sir?
Baka po valve seal.kung sira po Ang valve seat nyo,ipa machine nyo sa Isang machine shop.
@@tractorsmarinemechanic sir magkanu po binta nyo pagbibili ako ng buong cylinder head?
Paano po palakasin ang makina po pls answer po.
Magaling sir nagets ko na din kse sa tatay ko tumitingin lng ako hndi ko makuha kung pano nya itune up ang d850 namin tinatanggal nya ang glow plug at tinatapat nya sa butas ang daliri nya di ko din sure kung tama ba yon...slmat sa tutorial sir
Salamat din sa panonood.pki share naman po.salamat
Share ko yan sir,salamat sa pgshare...
Sa fb lng pla pwede ishare sir nashare ko na di pala maishare dto sa youtube
❤❤❤❤
please write to me the valve clearance of yanmar 3tnv 82 -DSA
0.25mm
Thanks you very much 👍👍👍❤️❤️❤️
Pls. share hit like.thank also.
@@tractorsmarinemechanic
Ook sir
4 cylinder engine tapped stating video
Valve-tappet clearance iseki engine e3ae1 /1296cm. ---is thees 02/02 ---??? Or not???
Iseki landhope tu 197 f.
The same with Kubota.
Sir ano po yung running mate nya?
3clinder Yan sir kaya walang running mate.ang may running mate ay Ang even numbers,gaya ng 4,6,8,12,16,18 Yan po Ang may mga running mate
Thanks bro
Thank you for watching
👍👍👍👍
Thank you for watching
Ano po yong size ng feeler gauge boss 4:02
Valve-tappet clearance iseki engine E3AF1
Iseki 185
Just give 0.25mm
Guy all 3 are the same Deutz 3 cylinder also thx
Sir same lng po ba sila pag tune up sa engine na D950? Same lng po ba ng filler gauge at firing order?
Pareho lang lahat ng 3 cylinder
@@tractorsmarinemechanic salamat po
Whare are you frome sir
Philipines
Surplus parts
Sana tinagalog nalang ndi kapa nahihirapan
please write to me the valve clearance yanmar 3tnv84 .. terima kasih
Just give 0.25mm
Me ajudou muito em
Thank you for watching.pls.subscribe and share
Sir I m maknik
Thank you for watching.please share my videos and also subscribe.
boss sana tagalog turo mo
፨፨፨፨
Sorry for eangish iam India🇮🇳
Salamat/thank you
Sir please job tractor mechenic
Hi .please sais klearens too waive iseki engine e3ae1./1296 cm. Iseki landhope tu 197f ---1---3---2 ...
Sorry for eanglish .i am ukraine...
Your engine is Isuzu.Valve tappet clearance for that engine you can apply 12 or 14 in your feeler gauge.thank you pls subscribe and share.
@@tractorsmarinemechanic tank yuo veary mach.
I dont stand...inlet valve 0.12 ...
Exhaust valve 0.14 ...or all 0.12--0.14.. engine e3ae1----1-3-2???
Intake and exhaust apply 0.14
@@tractorsmarinemechanic ok .thank yuo very mach.yuo is the beast mechanikal master👍👋.
Good like...
Pls.subscribe and share
Sir normal lang po ba na may langis sa part ng flywheel?
Meron kasi tumatagas sa amin na langis galing sa flywheel.
Hindi po normal.ano po unit?pwd k po tumawag sa #09502423351