Valve lash adjustment .firing order 1342 4-cylinder Diesel engine .specially for beginners.
Вставка
- Опубліковано 9 лют 2025
- Fuel average engine performance and smooth running depends on how better your Tappet setting is.For setting Tappet on Perkins engine valve clearance the 4-cylinder process is the same.
For setting Tappet on Caterpillar engine valve clearance the 4-cylinder process is the same.
For setting Tappet on Cummins engine valve clearance the 4-cylinder process is the same.
For setting Tappet on Mitsubishi S4L engine valve clearance the 4-cylinder process is the same. The clearance might be different but the process is the same for all engines for engines firing order 1342.
Yes, subscribed and shared with my friends. Best video for 4 cyl 1342
What is the best gauge no.to tune up JMC engine
Thanks for sharing
👌👌👌👌👌👌👌👌👌👌
What is the size of feeler gauge you're using
.35 mm and .45 mm
That’s for weichai engine intake is installed from Perkins but engine is weichai. Check your engine valve clearance according to engine manufacturer recommendation
Good job
Thank you
Worth sharing
When i followed your instructions, #2 intake was in the open position.
Perkins phaser
Which cylinder on valve overlap?
1 or 4
When I put number 4 in overlap I was able to adjust number 1 cylinder intake and exhaust but number 2 intake is on the open position.
@NatePrice-uh6jb with number 4 in overlap adjust number 2 cylinder exhaust and adjust number 2 cylinder intake after rotating engine 360 degree this will bring number 1 in overlap condition
@NatePrice-uh6jb if you need help, feel free to ask
What are the specs?
I have 4.236 from the 70s
I - .008"
E-.016"
??
.25 mm for intake and exhaust
According to perkins, the user manual
www.moteur-perkins.com/uploads/catalogue/lettre/notice/manuel-perkins-ld-4-236.pdf
Link for perkins user manual
@Technical.Education it seems intake for number 4 is at the very back of the engine on mine? I am turning same direction as starter, counter clockwise
Find TDC exhaust on number 4 and 1 cylinder if you can find that adjusting tappets is simple
@Technical.Education I can see 4 intake manifold port is lined up with very back of engine too. Same with #2 cylinder, exhaust toward front, intake toward back Strange, #1 and #3 are intake, exh order as shown in your vid. I'll make a video. Is it possible intake exhaust order switched on some engines?
Ok ❤
How much clearance for exhaust and intake Valve
Which engine are you working on ?
Good 👍 video brother
Thanks alot
good job, please what is the size of fealer guge
@tadiwosgirma1404 Every engine has its own setting .which engine are you working on?
Hi give the intake and exhaust clearance
Which engine are you working with? Every engine has its own valve clearance
❤❤
ex?
In?
Please
Which engine?
Engine model and make every engine has its own intake exhaust clearance