SPEEDFACTORY K20 Transmission Goodies | Taking a break?
Вставка
- Опубліковано 30 вер 2024
- Wanna Send some Cool stuff????
Dana Prum
P.O BOX 21304
San Jose, Ca 95151
Follow the media!
/ efnstatic
/ staticservice
/ danaefnut
Nomis Industries
/ nomisind
www.nomisind.com
ACTION CLUTCH 10% OFF DISCOUNT CODE : STATIC
actionclutch.com/
/ actionclutch
S1 BUILT Discount code "STATIC"
/ s1built
www.s1built.com/
/ @s1built
REDZONERACE
www.redzonerace...
/ redzonedb8
/ redzonerace
KELLYBUILT FABRICATION
kellybuiltfabr...
/ dsrxkellybuilt
CJSWIRING (RIP)
www.cjs-wiring...
/ c_zapien
MAXPEEDINGRODS DISCOUNT CODE : YSTATIC
www.maxpeeding...
/ maxpeedingrods
KONIG WHEELS USA
/ konigwheelsusa
konigwheels.com/
STREET2TRACK
www.street2trac...
BRFITTINGS
www.brfittings....
/ brfittings
Y&S Lexan
/ y_s_lexan
Feel for you and your family's loss bro, I know it must be hard on you. Your Dad would be proud of you and what you do. Thanks for sharing such an personal thing with all of us.
You probably figured it out by now. Sounds like with wheel speed, so either driveshaft, transfer case or diff bearings. Can you safely put it on jackstands and run it in gear?
Take off ur drive shaft and drive it again and see if it goes away
Now thats how i want people to visit my grave site! With some taco bell! Great video as always static!
Amen to that one bro
💯
Take it easy bro always for ya if you need to talk brotha
Withdrawal symptoms waiting on a new video🥶🥶🥶
Keep your head up Dana. Minor setback for a major comeback. You got this papa.
Damn why start the video like that... I didn't even finish watching I'm sorry for your loss
That's real life
Because paying respect to loved ones is main priority then anything else in life
That sounds like a wheel bearing stat
Personal shit first homie! God bless you and the family.
Thanks! It’s gonna be funny when the issue is some small bs 💩 🤦🏽♂️ always happens that way.
Damn, bro... that's gottaa be damn frustrating. Almost sounds like wheel bearing in the video. Carrier bearings rotate at the same speed, might be worth a look. Taking a break might be just whatthe doctor ordered. Protect your peace. We'll be here when you come back, brother!
Didn't Dana do work to a guys car that had ONE leg and pushed the clutch with a stick??? It popped in my head and can't really sift through the 1.4k videos Dana has made unless I know for sure it was on his channel 😂 let me know if you boys remember this!
I got one question I have a 97 civic ex with a b18b1 and the crankshaft position sensor plug doesn’t match what do I do use the one from my d series or just leave it be
Hey Dana Heads up...Love to your pops, sounds like its drive so all the rotating people have said wheel bearing and thats what it sounds like or trasfer case? good luck.
If it's constant and only gets faster it's probably either something with the wheels and axles or the awd setup. Also is there plenty of oil in everything?
Yo brother, I feel your pain I also lost my father.. During covid... Strongs to you and your family.. Keep up the good work you're a great inspiration to many people out here✌🏽 peace from Cape Town South Africa 🇿🇦🇿🇦
We all need a break every once in a while. You've definitely been going hard with the content. And it's very much appreciated. You'll definitely figure out what the transmission issue is when you get back at it
Very possible a input shaft bearing, your drill don't spin with near as much torque or speed as your crank... Swap it with the wagon transmission and still see if it makes it..process of elimination.
I heard if ya watch all d commercials your boy static gets paid a little extra. Let’s hook them up.💪😁
Sound like ball bearing fell out inside. Had a similar problem before when I had to swap out my the inshaft
sounds like harmonic balancer. i'm probably wrong though
Sounds like transfer/hanger bearing/4wd stuff that noise to me.
Check the drive shaft and possibly wheel bearings??
Definitely a bearing noise .. make check half shaft bearing aswell
Since it's a k24 can you start the car without the transmission and see if the noise is still there just an idea
@18:03 cleanest transition I’ve seen on yt 😮 what a way to pay respect to your pops I lost my pops a few years ago and I’m not super big on going to his burial site but I need to pay homage to him thank you for giving us consistent content keep your head up hopefully the issue is solved and we can get more on the road content out of the sedan can’t wait for the Mexico runs
I want to build my rsx type s for turbo. Advise?
that is definitely what a bad bearing sounds like.
Always something my friend!
I woulda pulled the axles out first and out it in gear and see if the noise was still there
You look just like your pops and time for a new s1 sweater
BRUHH PUT IT ON TWO JACK STANDS AND PUT IT IN GEAR
Hey man if u don't mind me asking but how old are u
And also give u props for wearing a sweater in Cali cus I know it gets hot out there it been in the 90s over here in Illinois and I definitely don't like it
I wanna say he’s mid 40s
Damn, that transmission transition, though.😎
Fat side in so the whole clutch disk is on the gear
dam bro sorry to hear, could be the main shaft bearing
Sounds like main bearing in transmission
You think it might be the half shaft maybe
Like the great missy elliot once said, just flip it and reverse it
3pm eastern standard time drop lol I’m always watching
I don't be commenting on videos...but man just wanted to say much love keep your head up ...and keep doing you been following you for about 8+yrs I think... love the content 💯 ✌🏼
It's sounds like a diff noise
Thank you for the video
Sounds like a bearing
Halfshaft bearing?
Sounds like a clutch issue bro.. the rattling is from the clutch is giving.. out having the same issue as well at the moment with my k24 EM1
R.I.P. pops. Like you say enjoy yourself and the build so don’t stress about the races, take the time and get it dialed in with so many people in your community and the knowledge about these vehicles we are certain that you will find your solution to the problem at hand.
Twin disc are noisy
If it's a speed based issue, rule out the red stuff, just yank the driveshaft and re test. If you have a block off plate, pull the AWD snout off the side of the trans too... Could be sometime with either of those.
I know you'll figure it out.
Sorry for your loss brother. Loosing a parent hurts so much. My mom passed away when i was 12 and i still miss her everyday.
I’m say that clutch may not look bad but it’s that clutch giving you problems static my clutch in my eg sedan I had to take out and replace the clutch soon as I had put the new one in was just a headache but keep Contant going love it🤘
🙏🙏🙏 respect Khmer
Still remember the day you let us know . glad you have so many memories of welding with your pops. Young Static has always puts in work!
Those 2 strap Velcro grandpa shoes look pretty comfy I’m ngl 😂😎
Let's goo!!!
Satuuk. 🙏
Remember you’re the man because of Him.. Stay strong big bro.
8 minutes up and 100 views 🙏 letsss goooo baby
Disconnect the RWD and see if it still makes the noise..
Keep your head up high man 🖤🖤🖤 sorry for your loss xoxo
🙏✌🏻🇳🇱
❤Always celebrate your loved ones 🎉 Dana you a real one
Great video
Sorry bro we got u we all behind u bro
Sorry for your loss I go through it every year
Let's go static my boy 💪💪💪 rest easy
Wassup Dana from SF 🤙
Sweet transition! 18:00
Axel bearing?
Make sure you torque the detents spring bolts. They can be too tight and mushroom into the forks.
Transfer case?
I have a bad bearing in my transmission didn’t get that loud but I just ended up just flushing it with some friction modifier trans fluid and the noise went away, it’s been 7 years 😂