I really enjoy seeing your work and appreciate you giving attention to the veins in his arms. I have started painting about a year ago and hope it doesn't take me too long to reach your level.
Not sure how your prints are coming out so beautiful keep it coming!!!! I’ve been trying to print large prints with siraya tech navy grey normal exposure 1.5s and bottom exposure 40s and they won’t stick to supports but small prints come out perfect
@@TheCreativeCollector so I put my bottom exposure @ 35s and normal exposure at 3s and from the calibration test is looks overexposed but the prints will stick to plate also there’s light extra resin on side of print every time it’s passed 30s bottom exposure so I end up going down to 30s and it’s gone
@TheCreativeCollector thanks I had a feeling that this is the tip you were going to give me I remember you saying how certain objects worp and bend from the points of contact of the suports . Thanks again for your response 👍. Oh and your secret settings for printing are gold 👌
That's for sure a nice model, anyone know what else you get with the Patreon? Seems like a lot at $77/month and I'm not sure of all the files you get to start
Good question. I use super glue with an accelerant for small stuff, then I use a two part epoxy for larger stuff. Super glue will give over time so I don't want my larger statues falling apart.
I’m always shocked to see how your models haven’t a single support scar anywhere!! Even medium supports leave some scars here and there… how do you do it???
@@TheCreativeCollector detail was great. But compared to anycubic it seems like idk mushy chalky. So yours wasn’t like that? Did you need to tweak settings maybe?
I really enjoy seeing your work and appreciate you giving attention to the veins in his arms. I have started painting about a year ago and hope it doesn't take me too long to reach your level.
That's awesome!
YES!!!
This is awesome
That look so awesome 🙇🏽♂️😭😭
I love this one and I think rocks and snow would be a better base with some grass and weeds
love the shading and high lights boots look good aswell
Thanks!
Freaking awesome 🔥🔥
Amazing as per usual
He looks amazing 👏
Thank you! 🤘
Fkn epic my dude as always! I can’t wait till you do the wicked prey piece!
Coming soon!
great job!
Thank you! Cheers!
Nicely done... Any news on the live shows 😁
Still trying to get caught up on a couple of things
So, when you're doing the shadows, you're just following the contour of the muscle kind of like line work in traditional art?
Pretty much.
What makes you decide to use shaved pastels for shadows vs. airbrush?
It just depends on how I'm feeling about the model. I like to use pastels more in tight spaces where I feel like I'll mess up with an airbrush. lol
Awesome work as usual :) I always look forward to your videos. I am new to the hobby and I have learned so much from you thank you :)
And thank you for your support 🙏
Hello as always great work purchased the file too, how much % scaled up to get it to that size , thanks
I believe it was 300%
Question how do you keep the claws sturdy without breaking
I'm just extra careful. lol Or you can print them in fdm so they're more flexible
How do you get your parts to line up so well ? I always have to file/sand them down and still get gaps
A lot has to do with the model itself, and proper orientation on the build plate. I do have to sand areas but everything usually lines up ok.
So fucking mint!!!! Good shit my dude!!!
Thanks my man! 🤘💀🤘
I had to laugh out loud the way you said my name “Steeeve” 😂. Great work and look forward to seeing more!
Awesome! Thank you!
Excellent work! Care to share your mixture for flesh tones? They are spot on!
Thanks. I have a couple of videos about flesh tones. Hope those help.
how do you know what paints to mix to get a certain color or tone, how do you know what colors to use?
You have to have a basic understanding of how the color palate works.
Not sure how your prints are coming out so beautiful keep it coming!!!! I’ve been trying to print large prints with siraya tech navy grey normal exposure 1.5s and bottom exposure 40s and they won’t stick to supports but small prints come out perfect
Up your normal exposure times to like 3-3.5 seconds and they should stick. 1.5 is not enough.
@@TheCreativeCollector will do thanks
@@TheCreativeCollector also not sure if this helps but my machine is a creality LD-002H
@@TheCreativeCollector so I put my bottom exposure @ 35s and normal exposure at 3s and from the calibration test is looks overexposed but the prints will stick to plate also there’s light extra resin on side of print every time it’s passed 30s bottom exposure so I end up going down to 30s and it’s gone
How do you orient his claws when you slice them I'm using the photon m3 max
Standing straight up
@TheCreativeCollector thanks I had a feeling that this is the tip you were going to give me I remember you saying how certain objects worp and bend from the points of contact of the suports . Thanks again for your response 👍. Oh and your secret settings for printing are gold 👌
That's for sure a nice model, anyone know what else you get with the Patreon? Seems like a lot at $77/month and I'm not sure of all the files you get to start
I'll have to look at his patreon because I don't remember it being that much.
His patreon is only $5 it looks like. The $77 is what he makes a month
@@TheCreativeCollector thanks for following up....such a weird page layout from pateron. now that's worth it and I'll be pledging for his models
i would have like to see how u do your veins
That'll be in an upcoming video.
@@TheCreativeCollector Sweet... i look fwd to it :)
Is it all hollowed out?
Yessir!
Hello,
I was wondering what the height of the print is from bottom of the base to the top of the print?
I believe it's 26 inches
@@TheCreativeCollector is that to the top of the claws or head?
Top of the claws
@@TheCreativeCollector okay, thank you
What kind of glue do you use?
Good question. I use super glue with an accelerant for small stuff, then I use a two part epoxy for larger stuff. Super glue will give over time so I don't want my larger statues falling apart.
@@TheCreativeCollector thank you any brands you recommend?
I use Gorilla Glue and this two part epoxy from BSI.
@@TheCreativeCollector thank you I love your videos they are always helpful and fun to watch keep up the good work.
Thank you!
I’m always shocked to see how your models haven’t a single support scar anywhere!! Even medium supports leave some scars here and there… how do you do it???
I dial down the density percentage to 20% on Chitubox. That helps.
Are you selling?
No
What's the scale? 1/6?
1/4
Model link doesn't work
Thanks! Got it fixed.
I tried that rich optio resin I don’t like it at all. Too chalky and weak.
I guess its not for everyone. Works great for me.
@@TheCreativeCollector detail was great. But compared to anycubic it seems like idk mushy chalky. So yours wasn’t like that? Did you need to tweak settings maybe?
Mine wasn't like that at all. I used the same settings that I used on all of other resins.
Amazing work 👏
Thank you! Cheers!
Just dont like the lower ear part of the mask, its too angular for me haha
I get it. Everyone draws him different.
Not ADHD i think you meant OCD. And shading with brush never going to look like air brush right ?
Not necessarily. I've seen some killer brush shading before.
@@TheCreativeCollector well I am only 2 months down the hobby hope i pick it up.