The Trainer
Вставка
- Опубліковано 30 лис 2022
- #motorage #autorepair #autotechnician #dso #labscope #digitalstorageoscilloscope
Many of you have asked for some basics on using a scope to get you started on your way to becoming a scope "guru". This should do the trick - with more to come!
Check out the playlist for more!
• All About Scopes! A Co...
There's lots more from Motor Age! Visit us at ua-cam.com/users/MotorAgeMagazine?sub_...
Show the world you were "Born To Wrench"! Check out our official MA T-shirts:
passthease.motoragetraining.c...
@@@ YES - I WANT MY FREE SUBSCRIPTION TO MOTOR AGE! @@@
endeavor.dragonforms.com/load...
@@@ TRAINING FOR PROFESSIONAL TECHNICIANS @@@
connect.motoragetraining.com
@@@ FOLLOW US ON @@@
Facebook: / motoragemagazine
Twitter: / motor_age
Instagram: / motor_age
TikTok: / motor_age
@@@ VISIT OUR WEBSITE @@@
www.vehicleservicepros.com
@@@@@@@@@@@@@@@@@
Due to factors beyond the control of Endeavor Business Media, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Endeavor Business Media assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Endeavor Business Media recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Endeavor Business Media, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Endeavor Business Media.
The tool and/or equipment featured in this video was supplied by the manufacturer and may or may not be retained by the reviewer at no cost. - Авто та транспорт
Thank you for this excellent video, Pete. I have watched a lot of scope usage and purchased a Micsig Automotive Scope a couple weeks ago. I've only played around with it a little but have time now to connect, adjust, and begin to truly understand the functionality.
I've never been that guy who screams about being the first to comment on a video but since the first comment was a spammer I'll just say that I'm the "FIRST REAL COMMENT!"
Tremendous tutorial ! Super helpful ! Thanks mate !!
Thanks impressed explained
Great job Pete
Thank you 🔥
Just purchased my first scope. It's the snap on zeus scanner with the four channel lab scope. Thanks for providing these videos for us.
Very helpful video. Thanks
PROFICIENT Sir Pete Meier Motor Age
My teacher .please do part 2
Thank you very much for sharing what you know with us .take care and have a great Evening with all your family around you
PROFICIENT Sir Pete Meier Motor Age From Nick Ayivor from London England UK 🇬🇧
Thank you for the work you do, sharing these invaluable informational videos on diagnostics.
This is a really quick intro into what a scope can do, but believe me, once you really start using one, you might get to be like Bernie Thompson from ATS (Pete was showing the ATS scope that Bernie helped to build).
The pocket scope Pete was showing will give you a great start. Once you use a 4 or 8 channel scope, you'll really like what it can do.
Also, the Hantek TO1112 is a nice cheap option.
The X axis is the horizontal one and the Y axis the vertical one.....ooops
Do you need an automotive scope or can you use a conventional bench top oscilloscope? How do they differ? I would imagine that a specialized automotive scope is easier to work with, but I already have a electronics scope how can I use it to best advantage.
Sure, I don't see any reason why not. It just may not have all the bells and whistles that one dedicated to automotive testing may have. Watch those input voltages!
Hello , I have Honda Accord 2008 I went to the dealer and they told me update the PCM , the code is P0339
Crankshaft Position Sensor "A"
Circuit Intermittent , sometimes when you starter the vehicle check engine going on with VSA, nothing different after update , already replaced the crank shaft , the problem is still , I try to take off the cable from cam shaft sensor and I drive the car. It's nothing gonna be happen no a check engine going on , the pcm has been delay to see I take of the jack from the sensor so what do you think the problem? Thank you.😂
Sorry for the delay in replying to you. This code could indicate a problem in the wiring, a loose connection or bad pin fit at the sensor or the ECM. I would use a scope to monitor the signal as I twist the wiring around.
@@MotorAgeMagazine thank you the problem is the ignition coil I fix it.
CAN YOU GIVE AN IDEA OF WHICH SCANNER TO START WITH XTOOL ,ALTELL ,SNAPON
That's a loaded question. It's a matter of how much tool do you need, your budget, and what your personal preferences may be.
Do you need a tool that covers multiple makes? Are you working on just drivability issues or do you also get involved with body systems?
@@MotorAgeMagazine ok. Can recommend one if I’m only using it on one car? Just a simple starter one that can measure injectors and fuel pumps etc..thx
The resolution of the oscilloscope is poor due to yhe camera view including your
We only need to see the oscilloscope screen and your hand and finger . I need to see the control labeling on the scope screen but its all fuzzy due to the poor resulution
Remove your person from the view to concentrate on the scope screen
Ось X горизонтальная, ось Y вертикальная...
Благодарю вас!
You need to zoom in on the screen for viewers to understand what’s happening. No point point having the camera on you or the screen 10 feet away.