Build a Custom Bike in a Day with Only Hand Tools!
Вставка
- Опубліковано 1 бер 2021
- This is how to build a custom motorcycle in just a day with simple hand tools. This should work with any standard style motorcycle. Hopefully this gives you some ideas!
Patreons vote on the cars to buy for future episodes - / worthlesswhips
Or support us here - paypal.me/worthlesswhips
Spotify playlist of the tunes I listen to while working on the car - open.spotify.com/playlist/4i0...
*Cameras/Mics*
Sony a73
amzn.to/37YMTXk
Sony Handycam
amzn.to/35OgHV2
Go Pro
amzn.to/38hAldV
Zoom H1 Handy Recorder
amzn.to/30iKtjG
Rode Smart Lav+
amzn.to/36UKdKe
DJI Mavic Air (our daily drone cheaper)
amzn.to/2RnRdc5
DJI Mavic 2 (Drone) the nice expensive one
amzn.to/2tXY57W
Manfrotto Befree Tripod
amzn.to/38aXvTa
Sony 24-70 f/4 lens for a73
amzn.to/2sxfST6
Disclaimer:
Due to factors beyond the control of Worthless Whips, we cannot guarantee against improper use or unauthorized modifications of this information. Worthless Whips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Worthless Whips recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Worthless Whips, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Worthless Whips. - Авто та транспорт
Patreons vote on the cars to buy for future episodes - www.patreon.com/worthlesswhips
Or support us here - paypal.me/worthlesswhips
Yup, more bikes pls 🙏
No more bikes, please...
“Factory cafe” version of these standard bikes seems to gain popularity here in Asia.
At 00:16 Winston are you displaying a Russian 🇷🇺 Flag on your t-shirt... ? Whats the significance M8?
What tire did you use on this gn?
Look at that young and fresh Winston and Matt. Great that you found a audience to upload this for
I was hoping you'd cover this eventually. Motorcycles are such a great hobby.
Seriously
That's literally what they started with what are you talking about. Their whole BRAND was Churchill customs wtf
I totally agree. Their ADVChina and old Churchill customs renown should make custom "curated" modified Chinese bikes a natural segue now that they're here in the States. I'm sure lots of folks over here might wanna buy one if they were just "beefy" enough for occasional highway use--say 400cc or more.
NEVER HAVE I CLICKED FASTER! I'm in like flynn, take me to awesome town! ive wanted to see you guys do something like this for a while now. more bike videos please.
Haven't heard that in like flynn since I left Alice..... lol
Ahhh....I get it now....after seeing the colors on "C-Milk's" motorcycle, his name is short for Chocolate Milk.
Condensed milk
Clear Milk
These guys are correct, it's for condensed milk. A Winston joke as I recall from Matt's wedding.
Cows milk
Actually, I knew it was condensed milk...I was making a joke seeing that his seat on his motorcycle was chocolate colored.
Happy to see a bike video here every now and then.
19:49 c-milk looking like the villains from Home Alone
MARV?!?!?
@@laowhy86 very close resemblance
As a owner of two motorcycles, a 97 vfr and a 2014 cb1100 i approve!
Yep... really like this. Bikes were the reason I originally subscribed to your channels, so... more please!
Man watching this makes me think back when I helped my uncle rebuild his buddy's 1992 Harley Fatboy 17yrs ago. It took us around 4 months to complete it and that was the 1st and only Harley I ever ridden, car's are my thing
Harleys are junk try an other bike.
Winston, the man with a suit and flip flops :P
I'm glad you mentioned the spacers and so forth to give us an idea what is really involved.
Hate bikes, but this video made me wanna drive one
I actually have a whole build series on my '96 GN125, where I "bolt stuff on" (for the most part, lol). They're just so cheap / reliable, and It's been an awesome time learning the ins and outs. Totally love this build - thing looks sweet!!💪🏍️
This video fits perfectly to what I want to make, I really like it that you haven't cut the frame, bc thats smth I was a bit afrait to do but now I see its also posible without cutting it.
The bikes you rode in your documentaries each had such a simple, but classy style about them. Minimalist and clean, they appeared graceful even in repose. Who knows? Perhaps you should copywrite "Churchill Motors" along with the logo and file it under future projects.
time to bring this channel back WINSTON!
You kinda reminded of a stewardess on a plane doing the safety briefing.☺
im am 19 from canada i got a yamaha blaster atv and fabricated a cg125 motor into the frame ! its a little ripper. i got the quad for free and you can get the engine for literally like 200 dollars and they are super reliable. my other build im doing is a dt50lc engine into a mini moto dirt bike it's pretty much all done atm. cheers!
Winston and C Milk Great Video Thanks
Do more bikes guys. This was awesome and I learned tons of this. You guys are honestly becoming my fav UA-cam’s and I’m following you both since your China only content for ages.
I have built 3 bikes already but this back to basics video was really good reminder. Now all I need is smaller bike like this 😂
I had a GN250 at Uni many years ago.Wish I saw this video back them. Cool bikes guys and great video!! 🏍👍
I need more videos from this channel
Yay! Bike!
Winston's cheap bike challenge from all those years ago is part of the reason why I have a GS250 in 1000 bits in my garage right now!
40 year old JIS machine screws really don't like coming undone!
(I should have got a GN, parts are so much easier to find! lol!).
The other reason is my VTR1000 is worse on fuel getting me to work than my car! LOL!
It'll be on the road this year, honest!
Can’t wait for it to be finished!
@@serpentza neither can I!
I should have made a video series of it, it would run longer than a US election count!
(I didn't plan on it to take so long, but then I found a new old stock tank in the original colour and it started turning into a restoration project!).
I love the bike stuff. Plus it's really impressive how much you've managed to change with so few tools. Imagination and persistence wins through.
PS: Thanks for the grip removal tip, I've torn so many, I'll give that a try.
This was actually amazing to watch... I never liked bikes before but the amount of tinkering you can do has made me interested.
I actually built my first "motorbike" about a month ago. I bought a cheap Chinese 49cc 4 stroke bike kit and outfitted an old used mountain bike. I'm only 15 so no license or nothing so this is good for now. It does about 50+ Kmph so thats more than enough for cruising Toronto. Best thing is, it cost me under 400 bucks. We all gotta start somewhere! These vids are really inspiring and I love your content. STAY AWESOME!
Awesome Video Winston! Love everything you and C-Milk put out. Just watched your Stay Awesome Documentary the other day and it was phenomenal. I also ended up renting the other documentaries just to watch them over again.
Wow that transformed the bike entirely!
Loving your videos, please do more :)
The bike stuff is GREAT content guys... Really liked this one, in depth and informative, well done!
Is there a button for double like. I’ve never needed it before in all the years of UA-cam.
What I usually do is just take the 2 bolts out of the caliper and fit that when the wheel is on. That way you're not trying to make 5 things fit at once (especially with dual front discs)
I think this is now my favorite channel from you both. Love all your content but have really been diggin' Worthless Whips lately.
It's a beautiful little biks. SOLID tutorial!
Yeah, Bruh !! I had a GN400 back in say...87 that I got for $400. Black on black like your 125. I was looking for an SR500 Yamaha, but they were all over $1000.. That little Suzuki was a 5 speed thumper, with a top speed of like 80. But it was what I needed at the time to really gain confidence as a rider, I was just a kid.. That's the bike I rode when mastered wheelies around corners, going up stairs, kicking over bikes without using the compression release, etc. It was a good solid bike. If it only had one more gear...
great looking bike. I wish I had this video back in my 20s.
It is recommended when you take your front wheel off to place a bit of a spacer between the pads to ensure the caliper doesn't close up. I usually just place an allen/hex key between them to keep them open. I here tell that if you didn't it is possible to accidently knock your front brake and squeeze them in, it is even possible to actually (say someone pulled the front brake on for instance) push the brake piston passed its seal) and then DOH!!!!!! so place a simple wedge in between to save a lot of hassle.. Just my 2 cents.
This video will teach me how to be a really cool dude.
I really enjoyed this video. It was you guys traveling on the bikes that got me interested in fixing up my dads CB750.
Been looking forward to this for a while. Awesome stuff guys
Crazy this pops up as i have been wanting to get into bikes.
Great job on this video !
I just happened to be doing a search for Custom Scrambler builds for the 250 cc Suzuki's and came across yours !
Looking for fender ideas, as I don't like the look of ANY bike without a rear fender, and this video is like, easy, relatively low cost, bike customizing 101, lol !!!!!
Great idea for both fenders, and Gave me more ideas !!!
Thanks !!!
Lovely lobby music in the background... 8)
Loved this one, I hope you do more about bikes in the future :)
Please make more videos about motorcycles. Great build!
I’ve been wanting one of these bikes forever!
OMG..Sitting here watching this vid as I just bought a mint 2012 GN, and just surfing through related vids and I'm thinking, man, this guy's voice sounds just like my South African cuzzies voice from serpentza and low and behold!
Man this is so cool I this channel, had no idea you gad this, keep it awesome!
That's a legendary Japanese motorcycle brand!!!
Your custom bikes got me into riding again.
Bought an XSR900 and love it.
Awesome! C-milk's new bike is an XSR900
Love to see more do it yourself videos. Nice work.
I hope you guys do a little bike series, would love to watch more!!
Good to see you guys doing some bike stuff again at long last. I love the muscle car stuff, but being an ardent biker and coming from the UK I am not so interested in owning one. I currently work in the Middle East and my future wife is a Chinese woman, so I am always interested in your videos.
Great video now I feel I can do this ! Great video 👍
Cool video. You make it seem simple although I know it would be well beyond my capabilities. Fun watching the process.
Great stuff, thanks for sharing.
There are some videos of this Peruvian kid working on gn125s, and does a "brat style" mod that has super similar to your design. You should check it out, he welds a custom seat support with a led strip and it looks awesome. I appreciate the way you frame your serpentza videos with the vcr tape intro/outro (nogistalgia factor), it's the little things. Your fathers stories are awesome. You do work that saves lives and is helping save this country. From east central Missouri, Stay Awesome we love you guys here, I am helping share your channel(s) and message for years now. Hi cmilk, love you guys, first saw C.S.C. in 2017.
Came here from looking into the ccp to ADV customs. Nice balance 🙂
lol i love you guys but it is funny that i live in the high rockies and yesterday was this first nice day i felt i could brave a ride with out freezing my butt off and you guys have more weather protection than i did just tooling in the garage in socal. IM AM LOVING THE BIKE STUFF THOUGH! you guys could do touring in america on motorcycles and kill it. more than muscle cars i would think. With the stuff you guys have been through in china on street bikes some fire roads and cool towns would be a breeze for you. keep up the good work!
That was awesome guys!!! Any chance of a parts list for this build? Just as a comparison to get started, or even just an example parts list for the GN? This has been on my bucket list since i first found your channel and watched your build videos back in China. Didn't quite know what sort of build i wanted to do however, but this one ticks every box i wanted. I know exactly what paint job i'll do too! Can't wait!
Personally I like shaved mirrors and upgrading the forks for modern handling. But other than that it was a nice instructional video
Very cool and fun project.
I really like the custom bike...thanks!
Much love, you both are the best.
I really like this style of video with building the bikes. If you can came bring back another video lie this one it would be awesome
About to walk out the door to help my cousin move his bike into his van for working on at my place. Interesting timing on my part.
This is great! Thanks for sharing all the great info & personal insights - you guys Rawk! Peace & Best Wishes to You & your Beloveds... Cheers!
Amazing build. Simple but done a big diference for better :)
Lo mejor de todos los videos es q no cortaste el chasis. Excelente
Excellent video
I had this exactly one in brazil, it this video was made in around 2011 I would have definitely done all those modifications,
I really like the bike stuff, doing a custom bike build is also really good cause you can watch the transformation in an episode or two, you could make cool custom bikes make media on them, then sell or auction them, they're cool, unique, simple and not too expensive, and they would have story behind them... I think you could sell them
Love these videos
Awesome content. I really enjoyed this.👍🌲☺
I enjoyed every second of the this work thank you
I got an old bike like yours. An ‘80 yamaha 400, the only thing i customized was the handle bars, a bit lower so i lean into the wind instead of being a drag cute sitting straight up. Rear Shock extensions would have been nice if i could have found some to lower it a bit. I like the seats the way they are as its like riding on the frame, for a short guy like myself it makes waiting at a light much easier having a seat instead of bars to straddle. To each their own tho, i like all the things you took off for their function. Especially the lights, ive come up on so many of these customed bikes that i couldnt see their signals and almost ran them down cuz of it.
Winston that was awesome!!! Thank you.
More moto vids, I rewatched this video 2times already, also I watched your old vids on your main channel
Great stuff!
Good job. Definitely build a 400cc-600cc+ street bike big enough for American highways
That was a great video. Thanks, lads.
Definitely more bike stuff. It’s a shame you didn’t film more at your shop back in China.
need more of this
Thanks guys!
Now I'm searching for a 125cc bike on eBay as a suitable project.
Little did I know my wishlist of
1: a K1200RS or
2: a slightly used Hayabusa wasn't going to be enough!
Now I need a teeny tiny project to make me happy.
Thanks 🙂👍
I already have GSX600F and a GSX750F starter projects....
Take a look at SR400 or TU250
Are you two toying with the idea of getting Churchill Customs up and running again? You guys made some awesome bikes!
Great video
I love this!
magnifique, j'aime beaucoup !!!
Love the motorcycle videos
love it. More scramblers please :)
I prefer the car stuff, thou was nice video.
Great Video!
Loved it
loved it!
Love it thank you
*Awesome!*
I always wanted to see how you've made them , good job ! Love it ! Sadly i cannot mod my 150 cc Chinese scootah :(
@patrick henry Sorry for the late reply mate , but yeah i follow CycleCruza and used to watch his videos a lot , lately his content has became a bit stale , but i still respect the guy!
Love it
Hmm after doing two 250 CB night hawk and a Gn 250 into scramblers my next one is hopefully going to be an XS 650 and a Suzuki Boulivattd 650 ,
u have some nice scramblers
such a cool video.