3 Ways to Repair Oven Stove Range Not Heating up to Preheat Temperature

Поділитися
Вставка
  • Опубліковано 25 лип 2024
  • 3 ways How to fix a gas or electric Oven Stove Range Follow this Repair service guide below
    always unplug power and turn off gas
    1. if Oven doesn't heat up on Gas oven then replace igniter but on electric oven replace heating element .
    2. if Oven heats up but not to the correct temp then replace temp sensor or thermostat mounted inside the oven. Turn off Oven and wait till it cools down before replacing it.
    3. if replacing thermostat does Not fix the heating problem then replace the control board.
    Oven safe Thermometer - amzn.to/2DDIPSm
    -affiliate links with amzn.to earns this channel revenue.
    Google Home speakers, Nest thermostat, Chromecast, Nest Hello Doorbell deals here- goo.gl/ht31kV
    Learn more about Tech and how to fix electronics, Subscribe to Tampatec here- / tampatec
    -Follow Tampatec on Instagram for tech videos and giveaways / tampatec
    -Tampatec is not responsible for misunderstanding info from this video, please refer to product safety manuals or contact manufacturer customer support. My tech repair videos are for adults with basic tech knowledge and skills.
    - I offer free tech support for my subs and followers.
    -Some of these products I order myself and some I receive for free to produce a How-to guides or/and reviews but I'm not paid for positive tech reviews. #ovenRepair #howto #tampatec
  • Навчання та стиль

КОМЕНТАРІ • 33

  • @TampaTec
    @TampaTec  4 роки тому +4

    Update you can calibrate some models by holding "bake" button for few seconds then use temp up+ or down- depending on the temperature difference inside the oven vs temp set. Once you set the temp (increase or decrease) then press "start" to save. In most cases you'll increase the temp on the oven. Check out the links in the video description and like 👍 if this helped.

  • @martibarrett6793
    @martibarrett6793 Рік тому +2

    I loved your video! Especially dropping the screws! You made it look totally doable, but as a 72 yr old woman, I think I’ll call the pro. However, you gave me enough info to explain the issue AND check the pro’s honesty!

  • @666lue
    @666lue 4 роки тому +2

    I subscribed to this guy so long ago for teaching me how to use a chromecast lol.

  • @lany_07gaming
    @lany_07gaming 4 роки тому +1

    Nice info for repair a oven range, great.👍

  • @Mymatevince
    @Mymatevince 4 роки тому +1

    Good video Paul 👍

    • @TampaTec
      @TampaTec  4 роки тому +1

      Thanks, I learned from the best 👍

  • @BB-qi4xo
    @BB-qi4xo 3 роки тому

    Your the best thank you

  • @TD05SSLegacy
    @TD05SSLegacy 4 роки тому +1

    Thanks!

  • @achag9273
    @achag9273 10 місяців тому

    excellent video

  • @HomeAutomationX
    @HomeAutomationX 4 роки тому +2

    We had an issue where the gas oven igniter wouldn't work. It failed when we put the turkey in on Thanksgiving. We watched a video on UA-cam and then went out to pick one up.

  • @ecgodsmack86
    @ecgodsmack86 3 роки тому

    Good video. Any videos on fixing/ troubleshooting samsung soundtowers by any chance? Mine keeps saying PROTECT than shuts off.

  • @YarblekRW
    @YarblekRW 4 роки тому +1

    My oven was funky for years then just quit heating. Opened it up and the temperature sensor wire was wrapped around the heat element ceramic insulator... $15 part and its been spot on since

  • @jdmccorful
    @jdmccorful 4 роки тому +1

    Good Basics. Next time, try removing racks and use a spintight with extended length.

  • @macdaddyns
    @macdaddyns 4 роки тому +2

    As a first step, you might read the manual and see if there is a temp calibration offset feature to correct the inaccuracies. If you can’t offset the set point enough, a new thermostat might be in order.
    Thanks for your videos

    • @TampaTec
      @TampaTec  4 роки тому

      good tip.

    • @rayknopp4602
      @rayknopp4602 Рік тому

      It will go to the temp. It just beeps too soon and it’s not there yet.

  • @amtpdb1
    @amtpdb1 4 роки тому

    How can you make the numbers brighter on the control board? I am unable to get a replacement board for my Kenmore and l am unsure how to repair it. Thanks

  • @Snookman-he9jb
    @Snookman-he9jb 3 роки тому +1

    Hi, my gas oven is taking a long time to heat up. The bottom burners are lit, but slow. Any suggestions?

  • @gatorgotme
    @gatorgotme 4 роки тому +1

    Tampatec - also if the temperature only measures within 30° of the set temperature, the temperature setting can be adjusted to match actual temperature. There are videos on this. Thanks

    • @TampaTec
      @TampaTec  4 роки тому

      thanks for sharing that, I should have tried that calibration first 👍

  • @tresvantwalker9295
    @tresvantwalker9295 3 роки тому

    I have a question. Can a bad thermostat not turn on bake mode

  • @rayknopp4602
    @rayknopp4602 Рік тому

    My Frigidaire model FGGF3058RFC oven beeps that it is up to set temperature when it is 100* below it. It will continue to preheat until it is closer to the preset temp. What is the problem? Thank You.

  • @FishinAround828
    @FishinAround828 2 роки тому

    I had a new stove top put in. The old one worked fine but now the new one won’t get hot enough to boil or fry and the oven next to it the burners won’t heat up. Both are wired into a box and the into a plug in. The old stove top had 3 wires and new one had 5. What could be wrong

  • @cracker3383
    @cracker3383 4 роки тому +1

    epic

  • @aliciaalvear9638
    @aliciaalvear9638 3 роки тому

    Do I shut gas or no ?

    • @TampaTec
      @TampaTec  3 роки тому +1

      Unplug power and turn off gas before working.

  • @Martin_IA
    @Martin_IA 4 роки тому +2

    0:03 I can already see the problem with the oven!, the numbers are backwards!

    • @TampaTec
      @TampaTec  4 роки тому

      i fixed that camera selfie setting turned off.

  • @skiplazauski1497
    @skiplazauski1497 4 роки тому +1

    I've done thermostat on my electric stove.
    WHY didn't you take out the oven racks before starting the task?
    You can use some masking tape to secure the screw into the bit if you don't have a magnetic socket.

    • @TampaTec
      @TampaTec  4 роки тому +1

      😂 yeah when I was editing I was thinking that too.

  • @hughmc5419
    @hughmc5419 3 роки тому

    Tip for you,put a piece of tape sticky side towards your screw,in your non -magnetic holder. Enjoy