Things you should know to assemble any 4-cycle engine. 1. You can't rotate a camshaft if you've already installed rocker arms but the timing belt hasn't yet. 2. To install a timing belt the first piston must be at TDC and the camshaft gear aligned on the timing mark. If the engine you put together in this video was from a real car, you would have damaged valves, head, pistons and possibly the camshaft and crankshaft.
if both pistons arent at tdc and getting hit by valves why would opening and closing the valves with the cam matter if its timed right when it actually runs
It´s 2-stroke (with additional valves). It has no active ignition control (only these permanent passive glow plugs). So there is no timing setup between ignition, cam and crankshaft. It starts as shitty as those typical 2-stroke nitro engines in 10th scale model cars
You can check between camshaft gear and crank shaft gear timing belt TCD(Top center dead point) and get checking glow plug working condition , also checking fuel tank through out fuel situations And also checking high speed neddle screw condition , low speed neddle and iddle needle
You need to check the camshaft Spark plugs are working and nuts and bolts are tight I managed to start mine But I neglected the flywheel nut and it flew off
They sent me the same engine to build on my tiktok page. It never called for any lube on the valves or crank shaft. I guess im gonna pull it back apart now. I knew it would need grease. 🤦🏼♂️
I have the same SEMTO engine and i have the same problem to start the engine. Its a problem with different Toyan engines. Mine seems to miss enough compression to start properly. I think that Toyan engines are not fine and not checked before living Toyan company (I have 4 Toyan engines with problems : FS-L400 - FS-L200 (2 units) - SEMTO). Bad quality but fine design !!!!
@@Fart_guy123 I can see in his video when he trys to start it and stops. the timing marks are not facing the right direction. Looks like a common mistake with new buiders.
Things you should know to assemble any 4-cycle engine.
1. You can't rotate a camshaft if you've already installed rocker arms but the timing belt hasn't yet.
2. To install a timing belt the first piston must be at TDC and the camshaft gear aligned on the timing mark.
If the engine you put together in this video was from a real car, you would have damaged valves, head, pistons and possibly the camshaft and crankshaft.
if both pistons arent at tdc and getting hit by valves why would opening and closing the valves with the cam matter if its timed right when it actually runs
It´s 2-stroke (with additional valves). It has no active ignition control (only these permanent passive glow plugs). So there is no timing setup between ignition, cam and crankshaft.
It starts as shitty as those typical 2-stroke nitro engines in 10th scale model cars
You can check between camshaft gear and crank shaft gear timing belt TCD(Top center dead point) and get checking glow plug working condition , also checking fuel tank through out fuel situations
And also checking high speed neddle screw condition , low speed neddle and iddle needle
What grease did you use
ever get it to run? What was needed? I have one that wont start
You need to check the camshaft Spark plugs are working and nuts and bolts are tight I managed to start mine But I neglected the flywheel nut and it flew off
Hello,
In short, great!👍
Greetings Seven
Thats so cool man!
I was wondering what lubricant and grease you recommend. I'm planning on buying the exact same engine
I think its called t2 grease
what lube oil are you using?
It looks like the gasoline doesn't arrive I think the crankshaft is not synchronized with the camshaft also looks at the carburetor
잘봤습니다 멋지네요
Does it come with directions?
Can you a toutorial on what you will need to start the motor and how to start it cause I’m guessing that dose not come with the box?
It actually does you just need a 2s 7.4 v battery for it
Wow, I like it.
They sent me the same engine to build on my tiktok page. It never called for any lube on the valves or crank shaft. I guess im gonna pull it back apart now. I knew it would need grease. 🤦🏼♂️
Does it work on fuel?
Yeah it just needed some settings
Any continuation? Did you ever get it to start?
I have the same SEMTO engine and i have the same problem to start the engine. Its a problem with different Toyan engines. Mine seems to miss enough compression to start properly. I think that Toyan engines are not fine and not checked before living Toyan company (I have 4 Toyan engines with problems : FS-L400 - FS-L200 (2 units) - SEMTO). Bad quality but fine design !!!!
timing is key, literally you probably need to time it
@@Fart_guy123 I can see in his video when he trys to start it and stops. the timing marks are not facing the right direction. Looks like a common mistake with new buiders.
put the earth wire on top of the engine head
かっこいい
Sounds like it hasn't been properly lubricated during assembly.
0:50 I can´t get that on
Engine looks great but Can't start it! Hope you can solve the problem.
Funny how he tries to start it but the gas tank is lower than the engine so no gas can get to it 😂
Cute how everyone copies the toyan engine puts their name on the cover and supplies toyan parts
It's semto, they're partners with toyan and make the toyan engines with them.
As long as it’s cheaper.
How much price ? plz
$200
All that but don’t even start 😅
This is how they run:
ua-cam.com/video/__olHtOHz4A/v-deo.html
Throttle dosnt do anything
First☺🥲🥲
망한겨?
Broken engine😅
I don't think so. I have one and a connecting rod broke. That's the problem with the L200. If that had happened, the engine wouldn't turn.