You have awesome skills, but.... crankshaft is the wrong approach... use 3 cylinders next time... and a straight shaft underneath powered with gear. Think of using salad oil in the future... Have fun 🤣🤣🤣
This is devotion, skill, and self training at it's best, I've never accomplished anything quite like it, yet been in 100% control of nearly 1 million dollar projects. This man has talent.
@@krotchlickmeugh627 UA-cam judge how to pay the same way for everyone, if anyone get less or more money it's because of each country's taxes, it's not UA-cam fault. And even if this video get demonetized in which case it would be a "loss of money and time", this guy just showed off his skills and knowledge, that's something that could give him a better job in, who knows? any vehicle brand that you could imagine (well maybe not Tesla), just imagine putting this video in your LinkedIn profile
Я из России. Инженер по образованию. Всю жизнь проработал по ремонту двигателей. У Вас природный дар. Вы и конструктор- теоретик. Вы и слесарь- универсал. Спасибо за фильм. Успехов и здоровья.
I keep hearing Alan Millyard saying: "I cut it off with my hacksaw, and it came out perfect." Most see old, greasy bike parts. The few see the potential, and have the skill to bring it to life. Fine craftsmanship here and no mistake.
Please make a multiple cylinder 2 stroke engine!!! Or maybe even v twin 2 stroke. V4 2 stroke. 3 cylinder 2 stroke. Twin 2 stroke. It doesn’t matter anything 2 stroke is cool!!! Good job. More 2 stroke engine please. 2 stroke lovers give me thumbs up. Let Le Dan see this!!
I'd like to see a 2 stroke V8 based on the Honda CR 500 which made 65+ horsepower from ONE cylinder, so an eight cylinder would be over 500 horsepower from only 240 cubic inches!
This video had me talking to the monitor and myself, outlining the issues that I knew had to be addressed to make this work, only to see you address those issues shortly after. I don't know how long that will live, but that is some impressive ingenuity.
I do something very similar. At times have absolutely no idea what he's doing or why... But it becomes clear later. He certainly has some talent. I always wonder how long these engines will last but of course that's not really the point. The fact they work *at all* is the impressive thing and anything after that is just gravy.
@@AnthonyHandcock The best part is that even if they work like a year tops, they can just be repaired. And probably vastly more easily than the first build.
@@makhang2 the work I do comes under official secret act of India so I cannot upload it on you tube but I can tell you that in a nuclear reactor there are 64 temperature sensors with redundancy of 8 it means at every point 8 signels of temperature are generated and there are in total 64 of such points. Redundancy of 8 is highest as per IEC standards . IEC stands for international electromechanical council.
Monsieur, ce que j'ai vu de votre production était déjà magnifique, mais là, vous avez mis le projet (et sa réalisation) à un tout autre niveau! Vous êtes une belle manifestation d'humanité, d'ingénierie, de qualités professionnelles et de passion, et je vous admire sans retenue. Quand je vois vos réalisations, je vois l'humanité dans ce qu'elle a de plus noble, de plus "debout". Merci infiniment.
Hats off to this guy for his machining and welding prowess, not to mention his blueprinting ability. From my perspective, it would appear more advantageous to cast and machine a cylinder block and crankcase assembly than to chop up four cases and then weld and machine them together to make a complete engine. Perhaps, I'm just thinking mass production, where as he just wants to complete one unit in his small workshop. He may not have a foundry or casting experience, but if he did, he could turn out more of those precious little gems and even supply them to smaller frame builders for a profit.
I think he did this more to show off his skills. The fact that he could do it. If I was Elon musk or NASA, I would be trying to hire this guy. I bet most people who have a master's in mechanical engineering, couldn't even do this.
@@tayloralvidrez4342 Yeah cause mechanical engineering is not about using, it's about making them cause machinist aren't engineers. One can't exist without the other, stop shitting freely on people that aren't even evolve or talked about. PS : Musk is a fuckin fraud.
Toàn nước ngoài khen bạn ấy , ở vn mình khó mà làm được điều thuyết phục được lòng của rất nhiều các nước trên thế giới , mà bác ấy làm đc thật là tài , mình xem video nào khen video đó
Cái hay cái tốt người nước ngoài xem hết cả. Còn người Việt Nam mình xem mấy cái xàm xí đú ko ah. Ko biết bao giờ ngóc đầu lên được với cái xu hướng của xh này nữa
I would not have believed that something like this was possible ( I have a manufacturing company) ; but watching this gentlemen design and machine this project left me stunned! I am bowing down to his remarkable skills!
Chế tạo tuyệt vời . Nhưng nếu được xem hoàn thiện và động cơ hoạt động nữa thì còn gì bằng . Tôi là người yêu thích chế tạo cơ khí , chúc bạn luôn thành công
This guy is wealthy enough to get those parts and machines in his private workshop, he can easily buy a 4 cylinders engine ready to use. However, he chooses to use his awesome skills in making the engine. Great performance.
i think those machines are from family business passed from generations. He obviously did not buy it all. That aside, his artistry and skills are great in recycling old scrap engines to a hybrid.
Proper machining skills, no CNC, all done by hand and calculated with his own brains. I was thinking at some point how he would get the crank shaft in as the crank case can't be split. And then he came up with the tunnel crank shaft principle, enabling to slide the shaft in from the side. Would like to see the next video with the rest of the build and the finished product running in a scooter.
Beautiful work on the cylinders. It would have been too much work to fabricate a "one-piece" head, but that would be something nice to see in the future.
From the USA.. Your work is IMPOSSIBLE to describe.. You are an engineering Genius & you would be an amazing help to any engineering or industrial design or manufacturer! I assume you have much schooling and must work for a very lucky company! I am looking forward to your completion video of this project.. and am honored to be in the prescience of a master! Thank you for letting me into your beautifully machined world!!
Bonjour j'ai regardé plusieurs video de vos transformations, votre savoir faire est exceptionnel et surprenant. Cependant vous n'indiquez jamais le gain de puissance , les résultats obtenus sur ces moteurs modifiés. Or outre la partie usinage et adaptation, ce qui est intéressant, c'est de connaitre le résultat de ces modifications. il serait bien de les ajouter ... Merci et bonne continuation.
And there was me the other week belly aching i had to remove and disassemble one jub on a 5 axis because i couldn't get on the 7 axis. Puts things into perspective. Guy is a leason to all, this vid should be part of every engineering schools curriculum
Thua bạn thật rồi, lòng nước CNC mới chịu :) Bạn tính luôn phương án thay đổi thiết kế để lắp được cốt máy mà kg cắt lốc, quá ngưỡng mộ... Không biết nói gì nữa chờ nổ máy thôi. Bạn có thể bán đấu giá cục máy này sau khi hoàn thành, biết đâu có người sưu tập đồng ý mua giá cao :D
quá giỏi b nhỉ. nắm rõ kết cấu, cơ chế phương thức hoạt động. quá khâm phục và đáng nể. nhưng phân khối tăng đồng nghĩa vs hệ thống làm mát cũ k thể phù hợp và 1 vài bộ phận lquan phải thay đổi theo để thích nghi vs cơ chế ms.
@@davidgwin4540 yeah as a builder I can't get enough of these videos. This video in particular reminds me of the Honda CB 400 four and another video a guy did where he made A V8 out of the 2 cb400f top ends like the mv Agusta v8 racer.
Maestro de la innovación!!!. Genio creador y creativo!!!!. HÉROE DE LA MECÁNICA MOTOCICLÍSTICA!!!!!👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏MAEEEEEESTROOOOOOOO
There is only one other person that I can think of that does this kind of work, Allen Millyard and everyone calls him a genius. Welcome to the genius club of two! Becoming a subscriber was never so easy. Thank you for starting my 2022 off with such entertaining videos.
No Brasil, tem um cara que construiu também um motor de 4 cilindros, inclusive ele construiu a moto inteira, que por sinal, ficou maravilhosa!!! O nome do canal dele no UA-cam é Riva Retifica, conteúdo de primeiríssima qualidade, o cara é genial também!!
O Riva uniu 4motores de 150cc e fez o motor da Riva 600, funcionante. Ja havia unido outros 2 pra fazer a Riva 300. Ele é muito humilde e grande profissional na area de retifica, que é a atividade dele na RIVA RETIFICA
@@mega-motos8238 claro que não está falando da Riva600, ne? Sugiro se atualizar pq a moto já ficou pronta e ficou muito bom o resultado final, com uma bela pintura tbm.
This is stunning proof that anyone can make anything out of anything. My biggest question is how much planning went into this? I can only imagine the knowledge it took to know what to do here.
I agree with you . such a potential of technical thought and engineering knowledge has been accused of a work that is not entirely practical. From a technological point of view, this engine is worthless. The only value from an engineer's point of view is a beautiful Sculpture . Not less very beautiful for me it is a waste of time and knowledge, in this place something more practical could be done, the work done by the author is huge, but it is a waste of energy.
@@sqooter. I mean I guess it could be construed as a waste. I think it's worth doing because it hasn't been done. The value of being the first or few to do something is pretty high I think. It's all to easy to buy something and throw it together. This man created something that didn't exist. And in certain countries availability of materials or even money in many cases prevents people from simply obtaining a new engine or even parts. This engine could run a lot of different equipment with the added torque. Log splitters, rope spooler, plow, water pump, etc etc. Also with him designing everything from ground up he could've increased compression and optimized the timing.
Part 2 You can follow it here
ua-cam.com/video/Ga2Na2IcnG4/v-deo.html
Amazing engineering and machine work!
@@SvendsenWorks p
Super robota 👍 efekt końcowy rewelacja 👍👍👍, to dziewczyny są twoje 😁😂👍
You have awesome skills, but.... crankshaft is the wrong approach... use 3 cylinders next time... and a straight shaft underneath powered with gear. Think of using salad oil in the future... Have fun 🤣🤣🤣
nice bro
Pure engineering planning and skill like that is a very rare thing, that's one of the most amazing conversions I've ever seen. Incredible work.
Saya juga takjub bos 👍👍👍
У него мозг работает лучше чем у 10000000000000000000 депутатов 😂
This is devotion, skill, and self training at it's best, I've never accomplished anything quite like it, yet been in 100% control of nearly 1 million dollar projects. This man has talent.
Looked to me like a gigantic waste of time and money
@@krotchlickmeugh627 not at all a waste of time or money. He has millions of views watching the entire video. He made a huge profit off UA-cam.
@@4_Nik_8 you dint know how youtube pays its foreign creators do you?
@@krotchlickmeugh627 UA-cam judge how to pay the same way for everyone, if anyone get less or more money it's because of each country's taxes, it's not UA-cam fault. And even if this video get demonetized in which case it would be a "loss of money and time", this guy just showed off his skills and knowledge, that's something that could give him a better job in, who knows? any vehicle brand that you could imagine (well maybe not Tesla), just imagine putting this video in your LinkedIn profile
Erstaunlich.
Я из России. Инженер по образованию. Всю жизнь проработал по ремонту двигателей. У Вас природный дар. Вы и конструктор- теоретик. Вы и слесарь- универсал. Спасибо за фильм. Успехов и здоровья.
Да ты тоже мог стать хорошим человеком если б не женился м тебя бы бабы не затюкали своими должен и обязан
Настоящее инженерное конструкторское бюро в одном лице, великолепный мастер на все руки и светлую голову!!! Успехов и счастья!!!
I keep hearing Alan Millyard saying: "I cut it off with my hacksaw, and it came out perfect." Most see old, greasy bike parts. The few see the potential, and have the skill to bring it to life. Fine craftsmanship here and no mistake.
I did too...
"perrrrfect" I believe is how Alan says it.
8میلیون تریبیون ابابیل د را برق
perrrrfect
@@svberend Just like that, bro !
Quá cầu kì để làm ra được một con máy độ. Rất khâm phục và ngưỡng mộ anh ❤️ Chúc anh luôn thành công & phát triển hơn nữa. 👍🏻
Mak mapan yeh
Please make a multiple cylinder 2 stroke engine!!! Or maybe even v twin 2 stroke. V4 2 stroke. 3 cylinder 2 stroke. Twin 2 stroke. It doesn’t matter anything 2 stroke is cool!!! Good job. More 2 stroke engine please. 2 stroke lovers give me thumbs up. Let Le Dan see this!!
I'd like to see a 2 stroke V8 based on the Honda CR 500 which made 65+ horsepower from ONE cylinder, so an eight cylinder would be over 500 horsepower from only 240 cubic inches!
agree ❤❤❤
Allen Millyard motorcycles is your 2cycle motor builder way good
@@garykeenan3724
I am so impressed beyond words! I have never seen such a combination of engineering knowledge and skill in anyone! Best wishes from Bangladesh 🇧🇩
Mad genius ! Renovating one little engine would be a satisfying project ….. glueing 4 together ? Amazing !!
Qúa đẳng cấp luôn bạn ơi,kỹ sư họ xem chắc cũng ngưỡng mộ chứ chẳng đùa.Hóng phần tiếp theo
機能するかどうかは別として、加工するのは驚愕したとか言葉にならないという表現ですね☺️
ものづくり得意そうだ！
Incrível o que você fez... Um motor com quatro cilindros. Adaptação perfeita.
Parabéns.
This video had me talking to the monitor and myself, outlining the issues that I knew had to be addressed to make this work, only to see you address those issues shortly after.
I don't know how long that will live, but that is some impressive ingenuity.
I do something very similar. At times have absolutely no idea what he's doing or why... But it becomes clear later. He certainly has some talent.
I always wonder how long these engines will last but of course that's not really the point. The fact they work *at all* is the impressive thing and anything after that is just gravy.
@@AnthonyHandcock The best part is that even if they work like a year tops, they can just be repaired. And probably vastly more easily than the first build.
This guy is gifted with supreme skills in machinery. You’re doing amazing work!
But very poor with casting 😁😁 he would have saved lot of bits and man hours simply by casting parts.
@@anshulbhardwaj4038 so you are greater than his. So where your video?
@@makhang2 the work I do comes under official secret act of India so I cannot upload it on you tube but I can tell you that in a nuclear reactor there are 64 temperature sensors with redundancy of 8 it means at every point 8 signels of temperature are generated and there are in total 64 of such points. Redundancy of 8 is highest as per IEC standards . IEC stands for international electromechanical council.
@@makhang2 one more thing if you look into a nuclear reactor pool you will find a blue glow coming out of water it's called cherenkov radiation.
@@anshulbhardwaj4038 then you got no proof to show me. Secret? My relationship with scandal is more secret than that.
Monsieur, ce que j'ai vu de votre production était déjà magnifique, mais là, vous avez mis le projet (et sa réalisation) à un tout autre niveau! Vous êtes une belle manifestation d'humanité, d'ingénierie, de qualités professionnelles et de passion, et je vous admire sans retenue. Quand je vois vos réalisations, je vois l'humanité dans ce qu'elle a de plus noble, de plus "debout". Merci infiniment.
Hats off to this guy for his machining and welding prowess, not to mention his blueprinting ability. From my perspective, it would appear more advantageous to cast and machine a cylinder block and crankcase assembly than to chop up four cases and then weld and machine them together to make a complete engine. Perhaps, I'm just thinking mass production, where as he just wants to complete one unit in his small workshop. He may not have a foundry or casting experience, but if he did, he could turn out more of those precious little gems and even supply them to smaller frame builders for a profit.
Setujuuu bos
I think he did this more to show off his skills. The fact that he could do it.
If I was Elon musk or NASA, I would be trying to hire this guy. I bet most people who have a master's in mechanical engineering, couldn't even do this.
@@tayloralvidrez4342 Yeah cause mechanical engineering is not about using, it's about making them cause machinist aren't engineers. One can't exist without the other, stop shitting freely on people that aren't even evolve or talked about. PS : Musk is a fuckin fraud.
Setting up a casting mold for such a big thing and figuring that out fully is pretty hard if thats not your main field. Especially the internal voids.
He does it for entertainment and makes videos, but his work in Vietnam is illegal so he doesn't do it for commercial purposes.
Профессионал экстра-класса! Снимаю шляпу)))) Видео прям для души. Спасибо!
Показал бы пуск этого франкенштейна
@@Mr200megaton может ещё покажет, подождём))))
It takes a great skill to assemble a 4 cylinder crankshaft precisely with resources you have. Very inspiring and great work!
Especially with those safety shoes :D
Spectacular, I just hope I can see that engine running !!
Wiedza inżynierska na wysokim poziomie, szok!
Ra thật nhiều sản phẩm để mọi người cùng xem nhé chúc Dẫn nhiều sức khoẻ.👍
This is why I have so much respect for Asia and it's people
They just do their own thing and make the most of what they have.
Brilliant job 👌
Did you just assume his race?
@@SanjanaRanasingha no, just a geographical region
@@plumberman19 how did you assume his geographical region then? By the look of his feet or his home? Or workplace?
@@SanjanaRanasingha wew, he is Vietnamese. really making big deal about race? we asian does not care about your CRT!
@@SanjanaRanasingha I assumed his geographic region based on his ingenuity.
Does that hurt your feels😭
Phải lạy bác luôn , VN thấy mỗi bác làm dc 😊
Toàn nước ngoài khen bạn ấy , ở vn mình khó mà làm được điều thuyết phục được lòng của rất nhiều các nước trên thế giới , mà bác ấy làm đc thật là tài , mình xem video nào khen video đó
Cái hay cái tốt người nước ngoài xem hết cả. Còn người Việt Nam mình xem mấy cái xàm xí đú ko ah. Ko biết bao giờ ngóc đầu lên được với cái xu hướng của xh này nữa
@@kiennqnguyen6311 bởi thế VN mìnhmới chậm phát triển
@@kiennqnguyen6311 đúng rồi a cái clip như khoa pug NTN thì xem cho lắm vào lượt đang ký mấy chục triệu , mà clip hay như này k ủng hộ người nước mình
@@luischanel9539 cũng khó nói lắm
bạn, kênh kỹ thuật sáng tạo thường giới hạn số lượng người xem, con kênh hóng ha hóng hớt xàm xí thì đủ người :)))
i am totally blown away and in ah of your talent on that lathe wow any thing is possjble clean and shine wow hulan ft worth tx usa lol
Làm cái máy V hôm trước 1 số người nước ngoài bảo đạo ý tưởng kỹ sư người nhật, giờ làm cái máy này coi còn bảo đạo của ai nữa ko, bái phục ổng ghê!
cái máy V lại chả phải dùng ý tưởng của ông nhật đi.
Cái máy V ông nhật còn chưa hoàn thành xong nữa
Роботы сделано очень много👏👍, удачи тебе в этом проекте, ждём первого запуска💚
Những cổ máy xe tăng cũng từ máy tiện thủ công tạo ra robot chỉ dựa trên kinh nghiệm của con người
WW2
Chúc a sớm phát triển sản xuất động cơ máy móc
I’ve messed around and worked on cars my whole life. This is on another level. Amazing to watch.
O melhor engenheiro do UA-cam, LeDan meu parceiro Deus te abençoou grandemente com inteligência, melhor virabrequim que eu já vi.
Like67
I would not have believed that something like this was possible ( I have a manufacturing company) ; but watching this gentlemen design and machine this project left me stunned!
I am bowing down to his remarkable skills!
We don't even know if it runs
@@dedelabinouze5110 useless people will not know anything. Goodluck!
i've been fixing bikes for years, and this fella is just something else, what talent.
I can’t wait to see this engine running in some of your projects bro !!! Amazing and smart guy
A Knowledgeable and skilled guy, supported by complete equipments and toolings
Em rất mong đợi động cơ này Chúc anh luôn thành công em theo dõi anh từ kênh cũ bị mất
This is a real class talent. Would love to see it fixed in a frame and running.
Oh you want to see it run too? Asking a bit much I think lol
Nhìn giống máy ve chai mua về làm quá khủng quá đẹp dữ anh 😂😂😁😁
Chế tạo tuyệt vời . Nhưng nếu được xem hoàn thiện và động cơ hoạt động nữa thì còn gì bằng . Tôi là người yêu thích chế tạo cơ khí , chúc bạn luôn thành công
"You cannot build your own car engine, thats impossible!"
Le Dan:
"Hold my Honda-Replica-Engine."
You cannot build your own car engine, thats impossible!?????? really ? that is why you fail my young padawan , nothing is impossible
jajajajaja....SAPEEEE
You have seriously awesome building skills. I'd love to see how you engineered your engine conversions.
This guy is wealthy enough to get those parts and machines in his private workshop, he can easily buy a 4 cylinders engine ready to use. However, he chooses to use his awesome skills in making the engine. Great performance.
It's scrap parts of motorcycle
i think those machines are from family business passed from generations. He obviously did not buy it all. That aside, his artistry and skills are great in recycling old scrap engines to a hybrid.
I am very, VERY IMPRESSED!
You are gifted people!
Respect and admiration for your WORK!
Greetings from Brazil.
Потрясающе красивый двигатель,невероятное творение, теперь буду ждать запуск,нетерпится увидеть и услышать как запоёт этот мотор 💯💪
Он не запоёт,он будет трястись как бешеная табуретка,если канечно заведётся.
Always impressed by your ingenuity. This time you have gone above and beyond .
Muy buen trabajo la verdad eres un artista con los motores,admirable tu trabajo,saludos desde argentina 👍 😉 👏
It became inline 4 silinder..what a great masterpiece❤❤❤
Proper machining skills, no CNC, all done by hand and calculated with his own brains.
I was thinking at some point how he would get the crank shaft in as the crank case can't be split.
And then he came up with the tunnel crank shaft principle, enabling to slide the shaft in from the side.
Would like to see the next video with the rest of the build and the finished product running in a scooter.
Congratulations, the build is just amazing... We all want to see this engine working (!)
Beautiful work on the cylinders. It would have been too much work to fabricate a "one-piece" head, but that would be something nice to see in the future.
Wih keren bos👍👍👍
From the USA.. Your work is IMPOSSIBLE to describe.. You are an engineering Genius & you would be an amazing help to any engineering or industrial design or manufacturer!
I assume you have much schooling and must work for a very lucky company!
I am looking forward to your completion video of this project.. and am honored to be in the prescience of a master!
Thank you for letting me into your beautifully machined world!!
He is a worker in Vietnam
Curious to know his training experience. Regardless this is incredible. He takes DIY to completely new level for me. I also would like to see it run.
@@noidontthinksolol yep.. firsthand experience is why college is a scam
He's probably a natural at this. Just has that kind of talent and vision.
แปลกใจเอาหัวเทียนใส่ตรงใหน
I watched the whole thing waiting to see it run lol hopefully there will be a part 2
where's the spark plugs going?????? doh.
Ahh this is amazing how precise work can be done without high-tech machinery! I watched every second of this video
Increíble la forma de realizar tal trabajo de ingeniería con herramientas básicas de metal mecánica, felicitaciones por su exelente labor.
can't wait for the part 2 of this. i want to hear the sound of this 4 cylinder engine!
Me too
Eres un artista, me saco el sombrero por tu talento 👏
Proof he knows what he’s doing… all 10 toes.
What an incredible talent u have Le Dan👍🏻 keep it up,brother. May God bless u.👌🏻♥️ from 🇲🇾
Em chờ con máy này của a hơi lâu rồi đấy . Cuối cùng a cũng làm nó rồi .quá đỉnh a ơi
Красава молодец умный парень,, Россия смотрит тебя.
It's pure joy to watch how you can turn a piece of junk into a shining piece of gold.
What the hell..!! You are crazy mechanic 😁
Next for part 2 i'am very curious 😲
Greeting from Indonesia🇮🇩
Bonjour j'ai regardé plusieurs video de vos transformations, votre savoir faire est exceptionnel et surprenant. Cependant vous n'indiquez jamais le gain de puissance , les résultats obtenus sur ces moteurs modifiés.
Or outre la partie usinage et adaptation, ce qui est intéressant, c'est de connaitre le résultat de ces modifications.
il serait bien de les ajouter ... Merci et bonne continuation.
May as well just built an engine from scratch at this point. still, massively impressive work, and for a proof of concept this makes sense.
nope its impossible to work with only room for one spark plug..doh.
@@stevepatterson1025 didn't you see that video? He will figure it out somehow xD
@@fakuu122 totally impossible with that configuration .
This guy is amazing. If I had his knowledge the possibilities would be endless!
Woooow, every new video is a amazing time spending watching you doing this pieces of art, I can't wait for see that engine start up and sound on revs😍
Es un trabajo espectacular , te felicito es un gusto ver las distintas soluciones , un abrazo desde Bahia Blanca Argentina
When it comes to engines there's nothing you can't do you're a genius
Dude U are insanely talented.... somebody give him a raise and some cnc machines....damn
Loving the straps used for clamping pieces down.
apakah ada orang indonesia yang nonton vidio ini kalo ada like yaa
Ada,,,saya juga nonton,,,salam indonesia
Ada
Jkt😊
Ini dari negara mana?
Hadir
That is a fantastic piece of engineering. I am a toolmaker myself. Greetings from Ireland.
your not a mechanic though .try starting it on one spark plug . slight flaw there.
Ur videos are so relaxing no talking just calm music and machining
Increíble. Lo que podría hacer todavía si tuviera herramientas más avanzadas aún. Muy muy bueno!
🚀
This dude literally blows my mind.. he should have been an engineer. Wow
ฐบล
This was absolutely the most ASMRly satisfying thing to watch. Truly magnificent video mate. Please make more.
And there was me the other week belly aching i had to remove and disassemble one jub on a 5 axis because i couldn't get on the 7 axis.
Puts things into perspective.
Guy is a leason to all, this vid should be part of every engineering schools curriculum
Thua bạn thật rồi, lòng nước CNC mới chịu :)
Bạn tính luôn phương án thay đổi thiết kế để lắp được cốt máy mà kg cắt lốc, quá ngưỡng mộ...
Không biết nói gì nữa chờ nổ máy thôi. Bạn có thể bán đấu giá cục máy này sau khi hoàn thành, biết đâu có người sưu tập đồng ý mua giá cao :D
quá giỏi b nhỉ. nắm rõ kết cấu, cơ chế phương thức hoạt động. quá khâm phục và đáng nể. nhưng phân khối tăng đồng nghĩa vs hệ thống làm mát cũ k thể phù hợp và 1 vài bộ phận lquan phải thay đổi theo để thích nghi vs cơ chế ms.
Absolutely incredible Also doesn't look like it would have been much more work to make it A V8
Hopefully that's next👍
@@davidgwin4540 yeah as a builder I can't get enough of these videos. This video in particular reminds me of the Honda CB 400 four and another video a guy did where he made A V8 out of the 2 cb400f top ends like the mv Agusta v8 racer.
@@Immortalrounin o890? A m
Yes, having gone to the trouble of modifying the crankcases to take a vertical cylinder block, why not put another 4 pots on the front?
@@ngocthanhang4412 moto guzzi v8
Trang bị máy móc êm đó e 👍❗️ ra Video chất lượng 👌, có đầu tư, ủng hộ e 1 like
Great skills you have great vision can't wait to see it run!
Increíblemente hábil,idóneo y capaz,muy inteligente en cada parte del proceso
I would love to see you build, and run, a mini cross-plane 4 cylinder engine. That would sound AMAZING! :)
Why are you so shure its a crossplane.
Its a flatplane, look at around 10:03.
Commenter didn't say the engine in the video was a crossplane engine, he said he would like the machinist to make a crossplane engine.
its more difficult gonna need extra space for a balancing shaft and more calculations, flatplane its more easy
Maestro de la innovación!!!. Genio creador y creativo!!!!. HÉROE DE LA MECÁNICA MOTOCICLÍSTICA!!!!!👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏MAEEEEEESTROOOOOOOO
Este tipo está a otro nivel, es un crack.
Independientemente si tiene estudio o no, yo lo considero un ingeniero.. impresionante, felicidades.
As usual, awesome, I can't wait to see this engine start, Le Dan is awesome ! ☢️
There is only one other person that I can think of that does this kind of work, Allen Millyard and everyone calls him a genius. Welcome to the genius club of two! Becoming a subscriber was never so easy. Thank you for starting my 2022 off with such entertaining videos.
Pppppppp
Trust me you were born for this.. with eyes only you can see the mm difference. My jaw is to the ground.
wow thats incredible, litterally made a 4 cylinder engine from scratch.
Wahhh keren memang ahlinya👍👍👍🙏🙏
Cara masang businya gimana?
@@maqfantasi9250 Next time bro
@@maqfantasi9250 bikin lubang baru
@@maqfantasi9250 iq rendah memang susah mikirnya
It would be good to see an other post how this engineer works with other technical parameters. Compression, power, ect
đúng là tay nghề cứng. Chúc em luôn thành công trong công việc và sáng tạo ra nhiều sản phẩm độc đáo hơn
Is there a part 2 ? i love to see your incredible creation in a good use.
Incrível ... Você é realmente um profissional de primeira.
Parabéns .
Obra de arte espetacular.
No creo que eso funcione
@@josewagostolopez7510 assiste o canal do Tiva retífica que você vai ver um desse funcionando
@@igorprates23 el canal se llama asi? No me pasas el link del video?
Việt Nam 🇻🇳🇻🇳 giỏi quá ban ơi ❤️❤️❤️❤️❤️
No Brasil, tem um cara que construiu também um motor de 4 cilindros, inclusive ele construiu a moto inteira, que por sinal, ficou maravilhosa!!! O nome do canal dele no UA-cam é Riva Retifica, conteúdo de primeiríssima qualidade, o cara é genial também!!
Esse projeto deu erro, desse jeito esse motor não funcionará, ficou lindo esse trabalho muito bom.
@@mega-motos8238 a
I do not understand
O Riva uniu 4motores de 150cc e fez o motor da Riva 600, funcionante. Ja havia unido outros 2 pra fazer a Riva 300. Ele é muito humilde e grande profissional na area de retifica, que é a atividade dele na RIVA RETIFICA
@@mega-motos8238 claro que não está falando da Riva600, ne? Sugiro se atualizar pq a moto já ficou pronta e ficou muito bom o resultado final, com uma bela pintura tbm.
This is stunning proof that anyone can make anything out of anything. My biggest question is how much planning went into this? I can only imagine the knowledge it took to know what to do here.
lubang busi nya bijimana om.?
I agree with you . such a potential of technical thought and engineering knowledge has been accused of a work that is not entirely practical. From a technological point of view, this engine is worthless. The only value from an engineer's point of view is a beautiful Sculpture . Not less very beautiful for me it is a waste of time and knowledge, in this place something more practical could be done, the work done by the author is huge, but it is a waste of energy.
@@sqooter. I mean I guess it could be construed as a waste. I think it's worth doing because it hasn't been done. The value of being the first or few to do something is pretty high I think. It's all to easy to buy something and throw it together. This man created something that didn't exist. And in certain countries availability of materials or even money in many cases prevents people from simply obtaining a new engine or even parts. This engine could run a lot of different equipment with the added torque. Log splitters, rope spooler, plow, water pump, etc etc. Also with him designing everything from ground up he could've increased compression and optimized the timing.
@Technically unique no one cares. Quit trying to steal Dan's fans.
@@sqooter. lemme guess, you are one of those desperate Allen Millyard's simp?
Super robota 👍👍👍. masz fach w rękach, tak trzymaj 👍👍👍...
Mil felicitaciones... Eres un maestro de la mecánica. Espero algún día lograr al menos la mitad del conocimiento que tienes...