I’ve owned like 3 I guess sports cars. And si, wrx, and corvette. The corvette is by far the fastest, but I just have this special love for vtec. The sound is just so satisfying. Great sound, great video.
I agree the engine design /tight tolerances makes for an amazing precise piece of automotive history . Now that I’m almost 40 i got my first dohc Honda
youre hearing the intake noises. the 4age (takamis engine) has ITB (individual throttle bodies) so it makes a really distinct induction noise. this specific civic either has the ITB's or a short ram intake to make that really throaty sound. love it
+Nicholas Swank yea i see ha & thanks for the advice👍i was jus thinking buying a head package like the buddy club 3 from password jdm and have the block stock & tune for sure
hello Supersupra87 I have a B20B 84mm With Wiseco 13.2 compression and also have some camshafts skunk2 pro 3 with its sprints skunk2 pro and I have a problem because the sprints are closed and let me know whether to make any changes to the cylinder head or change the sprints will appreciate your help thanks
Finally a new vid,its been a while😀 Still going strong😉 Any new mods? Looks lik iT has plenty of torque at 4000-6000rpm Do jou feel the vtec crossover or is iT just the sound? Greats from belgium
RUE5 EK4 Haha, yeah its been a while. But the engine mods are the same as last year and its still going strong!. However TWM 52mm ITB´s will be installed within a few months :) I dont feel the crossover that much, but if i delay the crossover by 500rpms or more, then its very noticeable :) Thank you! :)
So Back to itb's after all😀 Missing the sound and the trottle response😀 I remember that you had Some probs with your older itb-setup. I guess iT rides smoother with the vtec so low,but i like iT so much more to feel the vtec swich comming in hard. So i personally would program the vtec a bit later😉 (but thats my personal opinium and no attack to you😉) Looking forwards to the next vids
RUE5 EK4 Yupp, i really miss the sound of the ITB´s. But my old OBX itb´s was too small for upper end Hp. But the TWM 52mm shouldnt be a problem...i hope :) Haha, ofcourse its fun when vtec kicks in and you feel like you push the NOS button :P .But its difficult with my B20v, because its so strong at lower rpm´s too. I had 220nm of torque already at 3000-3500rpm with obx it´s last year, haha :) Im glad you like my videos and more will come! :) thanks!
5500 is when all hell breaks loose, nasty sounding crossover bro
Jourdan Johnson Indeed, this VTEC needs a bit more lube.
Mine kicks in at 4500
I’ve owned like 3 I guess sports cars. And si, wrx, and corvette. The corvette is by far the fastest, but I just have this special love for vtec. The sound is just so satisfying. Great sound, great video.
I agree the engine design /tight tolerances makes for an amazing precise piece of automotive history . Now that I’m almost 40 i got my first dohc Honda
Sounds gnarly bro. Best vtec crossover video I’ve ever seen tbh
I can’t wait to build an N/a b20 for my ek, drove one and fell in love with it. Honestly love N/A civics
sounds like the Fujiwara 86 after the engine swap
I googled that, and I don't get the love for it. Can you explain?
i get the love. good shit
youre hearing the intake noises. the 4age (takamis engine) has ITB (individual throttle bodies) so it makes a really distinct induction noise. this specific civic either has the ITB's or a short ram intake to make that really throaty sound. love it
Fuel needle at the beginning vs fuel needle at the end of the video!
Vtec cracks hard with this one.
I know its an old video but that vtec crossover 💧💧💧💧💧
Sounds meaty even when its before the VTEC crossover
Nice Sound :)
that is seriously quick
at 55 hundred rpms an animal was released from its cage... the VTEC MONSTAAAA
Love, this beast.
dang what a sound bro
excellent video!
uwkcal Thanks! ;)
a stock b16 head on a b20 block with pistions and rods would it hadle fine?
+Nicholas Swank yea i see ha & thanks for the advice👍i was jus thinking buying a head package like the buddy club 3 from password jdm and have the block stock & tune for sure
Yea ive seen them too but im not a fan of junk2 ha & a must on port and polish but buddy club spec 3 is what ima run with bigger injectors
Man, and I thought Vtecs were gay. That is a mighty engine!
highest revving b20 of all time
We are waithing for new vtec vids😜
+RUE5 EK4 Not this year, more in 2016. Been low on budget this year and nothing new and interesting to upload :( sorry.
what a beast.
hello Supersupra87 I have a B20B 84mm With Wiseco 13.2 compression and also have some camshafts skunk2 pro 3 with its sprints skunk2 pro and I have a problem because the sprints are closed and let me know whether to make any changes to the cylinder head or change the sprints will appreciate your help thanks
Still high up in rpm. Daily driving I rarely go over 2.5k rpm. Still with traffic. K20 tho
When are new video comming?
+JDMTurboful 2016 ;)
What’s done to that engine man?
Bra ost
Finally a new vid,its been a while😀
Still going strong😉
Any new mods?
Looks lik iT has plenty of torque at 4000-6000rpm
Do jou feel the vtec crossover or is iT just the sound?
Greats from belgium
RUE5 EK4 Yea im curious aswell
RUE5 EK4 Haha, yeah its been a while. But the engine mods are the same as last year and its still going strong!. However TWM 52mm ITB´s will be installed within a few months :)
I dont feel the crossover that much, but if i delay the crossover by 500rpms or more, then its very noticeable :)
Thank you! :)
So Back to itb's after all😀
Missing the sound and the trottle response😀
I remember that you had Some probs with your older itb-setup.
I guess iT rides smoother with the vtec so low,but i like iT so much more to feel the vtec swich comming in hard.
So i personally would program the vtec a bit later😉 (but thats my personal opinium and no attack to you😉)
Looking forwards to the next vids
RUE5 EK4 Yupp, i really miss the sound of the ITB´s. But my old OBX itb´s was too small for upper end Hp. But the TWM 52mm shouldnt be a problem...i hope :)
Haha, ofcourse its fun when vtec kicks in and you feel like you push the NOS button :P .But its difficult with my B20v, because its so strong at lower rpm´s too. I had 220nm of torque already at 3000-3500rpm with obx it´s last year, haha :)
Im glad you like my videos and more will come! :) thanks!
+Supersupra87 how much power your b20 set up made?whp?
nice!! whats the set up? how did you get it to hit that hard!??
I have a honda myself and it has torque of a chainsaw ! LOLOL
It revs like a Honda CBR!
Stock block?
Nice!
What cams and ITB were you running and is it porter head ?
Can you use these cams on a stock block ?
yes, just don't over rev the shit out of the engine or it's gonna bend some valves xD
Over rev meaning what rpm lol
They have hondata for that
Any issues with the motor How many miles are on the build I'm curious.
greenlight2600 No major issues. But its not a stock B20 block/sleeves if you´re wondering.
Supersupra87 so what is done to it?
Stock block? Or do you have rod bolts and how long have you been running it?
bunny Bungalo Not a stock block. I have a Sleeved block from golden eagle, eagle rods and JE pistons. I have already ruined two B20z blocks before.
Supersupra87 Why you ruined 2 b20 block??? reason??
@@hondapwr3775 stock b20 sleeves are not reliable..he ruined 2 stock sleeve b20 blocks
B16 head with a K20 block?
Yes with a adapter plate and gasket maker also a d series transmision
NOISE BOMB Brap sweet dude
NOISE BOMB Brap the gears seem pretty long but not too long
What camshafts?
Think it was Skunk2 Pro2
@@Supersupra87 thanks bro
What head are you using and specs
are you using a girdle?
Which Transmission are you using in this video?
S80
What exhaust are you running?
What HP u got
Is that optimum operating temperature
Anders Kinsler Yes, the temp needle never goes to the middle. Its around 85-91c.
0:31
Still running on ITBs?
Peter Yang No, performer X intake in this video. But TWM 52mm ITBs will be installed soon :)
this vtec is wtf :O
8500 RPMS!
what cams?
+16ValveVtec Skunk2 Pro2
+Supersupra87 the vtec crossover is pronounced
Those tachometer can't take too much rpm😂
Arabic Songs....!!!
kinda sounds like 4AGE
Your sound like problem check it
i hear bov noises
Are you sure not sure ?
Supersupra87. im sure on what i heard. but then again i could be hearing things.
You're definitely hearing things dumb ass. It's not a turbo. Doesn't even sound like a turbo.
weed wacker