DIY Timing Belt Serpentine Accessory Belt 1.7 CDTI Opel Astra H J Corsa D Meriva Zafira Honda

Hello wannabe mechanics! In this longer episode we are going to show you how to replace the timing belt ,the serpentine belt, the water pump, the idler pulleys and the tensioner pulleys on your car . This tutorial is specially created for beginners so we added more checking methods so you can be sure you didn’t miss anything. In the beginning of the episode we will learn a bit about the role of accessory belts and timing belts, when to replace them and how to know if they are failing.
Aplication: Opel Astra H, J , Zafira B , Corsa D , Meriva , Honda Civic Z17DTR A17DTR Z17DTJ
I am using the Go Pro Hero 7 for my videos. In my opinion it is the best due to mechanical gimbal‑like stabilization-without the gimbal. Also you can use any power bank you want when filming, no over heating. Affiliate link here for best deal:
amzn.to/3nwVheb
Car parts you need:
Timing Belt Kit
tidd.ly/3Nabbpg
Tensioner Assembly
tidd.ly/3HeiHeL
Tools you may need for this job:
Heavy Duty Pulley Puller with Reversible Jaws (mandatory for this job)
amzn.to/44bXJr1
- High end best quality-price mechanic's set
amzn.to/3UV0xoa
- Low end good quality-price beginner mechanic's set
amzn.to/3GUqj6c
Torque Wrench
amzn.to/3GYU0Ty
Breaker Bar
amzn.to/3KRywZV
Cordless Drill and Impact Driver, Power Tool Combo great offer
amzn.to/3LhV2N8
Car jack 2.5 Tons
amzn.to/41ycPFb
Jack stands
amzn.to/3L5Jjj5
In case you need a new car mat for your beautiful Astra J, check this out:
VAUXHALL ASTRA J HATCHBACK (2010-2015) BOOT MAT
tidd.ly/3mYcvk6
VAUXHALL ASTRA J (2010-2016) CAR MATS (310MM CLIP SPACING)
tidd.ly/3LnJS9w
VAUXHALL ASTRA J (2010-2016) CAR MATS (325MM CLIP SPACING)
tidd.ly/43X5eSo
Music: www.bensound.com/
Disclaimer: The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle. Wannabe Mechanic and any sponsors of this video assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Wannabe Mechanic recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Wannabe Mechanic, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Wannabe Mechanic.

[@olivercarroll5178]

Did this job recently and found this video superb,in fact by far the best on UA-cam.. Really explains well and gave me the confidence to do it having studied it many many times ... Bravo Wannabe Mechanic👏👏👏👍🏼👍🏼👍🏼Two things worth noting having now successfully completed the job 1.
I didn't have to remove the inner fender (it's really no advantage) just the cover over the crankshaft pulley itself.
2.When checking final T.D.C.(Top dead centre)note that because the sprockets are of different diameters it may take up to 6 full revolutions of the crankshaft to achieve full alignment....hope that helps somebody....

[@TheDIYWorkshop2020]

Glad it helped! thank you for your review.

[@lupuadriannicu6297]

great filming (good angles) and explanation! i loved how you explaned the mehanics as well a bit before tearing the engine down!

[@TheDIYWorkshop2020]

Thank you for your comment and for subscribing!

[@alexgnom1875]

Dankeschön für Video, Master

[@TheDIYWorkshop2020]

Danke sehr, Alex!

[@matthiaszeise9916]

Brilliant! Even for expert's an informative video. Thanks a lot!

[@ilsozanatta7545]

Great video lol. Thanks a lots

[@joeoria4497]

That music drives you mad
But a good vidio

[@sorinel97]

At 26:10 sequence I don't understand why to sign the belt's theeth if we inserted the bolts into the pulleys like safety measure. Is it important or optional? Thanks!

[@TheDIYWorkshop2020]

It is important for beginners. You might miss a tooth. This way the tension in the belt is the same between pulleys. Our channel is for beginners and safety is our main priority. Untill you release the tensioner you do not now exactly how tensioned the belt is between pulleys. As a final answer I would say it is important.

[@brattica1980]

Salut, e la fel si la astra h?

[@TheDIYWorkshop2020]

Sunt trecute în descriere codurile de motor la care se aplică . Chiar dacă pot exista unele variațiuni,principiul schimbului distribuției este același.