Hey thanks for this creative idea! I was able to fix the keypad carbon contacts of my vintage Uniden Sportcat SC150 scanner. I painted the broken traces with your conductive carbon paint then coated them with thin layer of nail polish. Now the number keys 4, 0, DATA, and PRIORITY keys are now working! I will try this next on my Panasonic Lumix camera with broken contacts on the rotary switch. Hope this works as well.
🤔 "coated them with thin layer of nail polish" that should have just OVER INSULATED your conductive coating, better would have been to have just added a trace of white glue as a binder
impressive but i also had similar questions. and i am not above average in this subject so please excuse my ignorance. it is not obvious to me how you were able to use your hands to complete a circuit. and without knowing some estimate of voltage. is that 120 ac? i am in southern usa. so that is what we use for those type light bukbs. and that voltage or similar would certainly be a problem on what seems to be a papertowel so i am asking basically is there some sort of known value of resistance anywhere in your model? awesome model either way
Hello, very good, your 2 very educational videos and I was reading the queries that you made about the project and I had some doubts. 1- you can use 1.5 old batteries already exhausted (sorry, my English is not very good and maybe I misunderstood its explanation in the video) 2- When using battery centers, not only graphite is incorporated, they also have the specific binders of each battery, so depending on the brand of battery, they may obtain a different conductive performance, it could perhaps be carried out in each case a measurement with a tester or multimeter preview and see its conductivity. 3- You proved that this paint has electrical resistance, you have to redo it, for example that commercial paints can draw a maximum of 1 meter of conductive wire. 4- and obviously, since they are drawn on paper, care must be taken of the load that is placed on it, since it can heat up like any resistance and produce fire due to the materials used. 5- For the dissolution of the core material of the 1.5v battery, you use common water, that is what I understood. or maybe you see this perdudique the conductive mix is a matter of trying and seeing what happens. 6- It would also be good as an experience to add more common water and see how the resistivity decreases and thus obtain a resistive table according to the ml of water that are added to the mixture And finally they can carry out the same tests of the paper using fabrics. I am doing similar experiences with E-textile cyber_99x@hotmail.com
You would end up getting a more homogeneous paint if you would only use the crushed carbon rod, the other stuff is manganese dioxide wich doesn't dissolve in water. Because of this, your paint ends up being so chunky.
Hello. Now there is a quick and easy way to get conductive paint. Nice. What resistance do you measure when the paint is dry ? Over different distances.
@@mydulislam4218 has not written any good or negative news since it has not written yet in a very long period and I have been brought to a different perspective as well with a few things in my head to help with a few more people in this year than the new years of grace in their own business as a whole life insurance industry and they will have a plan of success for their business as
video summary: create a suspension of graphite powder in water (which you can get from carbon-zinc cells) I recommend you use alcohol instead and you can use a binder like PVC or dextrin however, if you are making a heating element pick a bindr that won't decompose at the temperature.
can you post a schematic for the lightbulb switch circuit? i found the one that uses the arduino, but i would like to do it with only the transistor if possible.
Aatik, When you touched the ink with your finger, the lamp went on, can I replace lamp with a turning dynamo ? can the touching process works with turning a dynamo circuit ? thanks
the difference between ac and dc is that ac changes the polarity every 60 seconds, so it's pretty much the same thing on the wire. if you're thinking of ac from the wall, the main problem is not ac, is the voltage, which can cause the paint to heat up. i reccomend painting in something fireproof, with many layers of paint. it's still not optimal, if you plan doing something lilke controling an appliance, you can use wires, and a relay. closing/shooting a circuit will cause sparks in both the paint or copper wire, because the eletricity starts flowing before it has an optimal contact, witch creates resistance, and thus heat, melting metal and creating plasma, creating these sparks. also be sure to wear ppe and follow your local regulations for eletric instalations
Nice video, But I was hoping it was going to be a video to make conductive paint to paint on the wall using cheap Walmart paint..lol So that I could EMF ground my bedroom...lol Because that store bought shielding paint is to high..lol I like the finger to the light bulb... Thanks for sharing.
Buy and use a product already made for restoring those contacts . . . . or CRT aquadag coating . . . . . .this mix is not durable and develops micro fissures when dried out.
This did not work for me. I used old exhausted batteries of a cheap brand, extracted the black stuff, ground it, and added tap water until I got a mix density visually similar to the one in the video.
Is there a list of materials and quantity do this experiment , ? Student I work with wants to do this for science fair what will she need ? Are there any any hidden steps ?
Hey, thanks for the video! Can you use it to repair rear window car deffoger grid? In my case I have a few broken grid lines. Do you think that will work?
Use a MUCH-MUCH-MUCH-MUCH-MUCH better product, as is being sold at auto supply stores . . .metallic based with LESS resistivity and is being much more robust.
Tell the truth buddy… carbon rod conducts bcoz atoms are closely packed & touch oneanother… when powdered no matter how fine particles are it will not conduct. The water is conducting here, after few minutes h2o evaporate, u can do this with sand… Try aluminium paint which is permenant.
NO it can't be used to turn high power loads. You can only pass few milli-amps through it. Just to light up an led, provide signal to a micro controller or to the base of transistor
Warning to anybody that wants to do this. The paint that he made in this video is very dangerous. The Manganese dioxide (the powder from the battery) is a fire hazard. So this recipe is not recommended.
Lol .my mom raised me by telling batteries are like bomb since childhood I'm afraid of it.but u ripped battery nothing happened. Now I'm overwhelm. 😫😫😫😫😫
I like the light bulb switch! Brilliant!
Hey thanks for this creative idea! I was able to fix the keypad carbon contacts of my vintage Uniden Sportcat SC150 scanner. I painted the broken traces with your conductive carbon paint then coated them with thin layer of nail polish. Now the number keys 4, 0, DATA, and PRIORITY keys are now working! I will try this next on my Panasonic Lumix camera with broken contacts on the rotary switch. Hope this works as well.
🤔 "coated them with thin layer of nail polish" that should have just OVER INSULATED your conductive coating, better would have been to have just added a trace of white glue as a binder
impressive but i also had similar questions. and i am not above average in this subject so please excuse my ignorance.
it is not obvious to me how you were able to use your hands to complete a circuit. and without knowing some estimate of voltage. is that 120 ac? i am in southern usa. so that is what we use for those type light bukbs. and that voltage or similar would certainly be a problem on what seems to be a papertowel
so i am asking basically is there some sort of known value of resistance anywhere in your model?
awesome model either way
Hello, very good, your 2 very educational videos and I was reading the queries that you made about the project and I had some doubts.
1- you can use 1.5 old batteries already exhausted (sorry, my English is not very good and maybe I misunderstood its explanation in the video)
2- When using battery centers, not only graphite is incorporated, they also have the specific binders of each battery, so depending on the brand of battery, they may obtain a different conductive performance, it could perhaps be carried out in each case a measurement with a tester or multimeter preview and see its conductivity.
3- You proved that this paint has electrical resistance, you have to redo it, for example that commercial paints can draw a maximum of 1 meter of conductive wire.
4- and obviously, since they are drawn on paper, care must be taken of the load that is placed on it, since it can heat up like any resistance and produce fire due to the materials used.
5- For the dissolution of the core material of the 1.5v battery, you use common water, that is what I understood. or maybe you see this perdudique the conductive mix is a matter of trying and seeing what happens.
6- It would also be good as an experience to add more common water and see how the resistivity decreases and thus obtain a resistive table according to the ml of water that are added to the mixture
And finally they can carry out the same tests of the paper using fabrics. I am doing similar experiences with E-textile cyber_99x@hotmail.com
Great idea! I had forgot that heavy duty batteries use carbon for an electrode.
Did anyone see that quick message at the end? “Last day on earth” ??? Am I tweaking?
It was a joke because the capacitor is explode
You would end up getting a more homogeneous paint if you would only use the crushed carbon rod, the other stuff is manganese dioxide wich doesn't dissolve in water. Because of this, your paint ends up being so chunky.
Your the goat this might help me fix my psp
Hello. Now there is a quick and easy way to get conductive paint. Nice. What resistance do you measure when the paint is dry ? Over different distances.
could this be used to fix a TV remote rubber button sheet, membrain, won't make contact any more. could this be painted on to the pads?
Did u try
Which glue you have used for binding the carbon powder?
Can i use synthetic graphite powder thats 99 percent purity with either acrylic paint or water based pva glue?
I did it and it worked, thanks for sharing your innovative ideas with us 👍🏻
Is it durable for month to month .yar to yar. when it dry is it work well.
@@mydulislam4218 has not written any good or negative news since it has not written yet in a very long period and I have been brought to a different perspective as well with a few things in my head to help with a few more people in this year than the new years of grace in their own business as a whole life insurance industry and they will have a plan of success for their business as
video summary:
create a suspension of graphite powder in water (which you can get from carbon-zinc cells)
I recommend you use alcohol instead and you can use a binder like PVC or dextrin however, if you are making a heating element pick a bindr that won't decompose at the temperature.
Hi
Can I use this mix to fix remote control buttons?
can you post a schematic for the lightbulb switch circuit? i found the one that uses the arduino, but i would like to do it with only the transistor if possible.
does this work for repairing membrane keyboard traces?
i wonder alse since my stove ribbon cable has separated from heat
I would like to recreate the lamps circuit. of course I don't quite understand it in the fast version.
Oh very thanks ... Simple tutorial and your idea
Very Nice Video Can I use such Link in repairing fixable Flat cables
Thank you Sir, you have enlighten me a lot
primero dice que usaremos el carbon pero luego que hay que triturar la mezcla de zinc
So if you use paint as a carrier for the carbon, you could paint a fabric and the fabric coated would work like a stylus on a phone screen?
What resistance does it have compared to graphite?
Can I use that for broken fog line in rear glass of my car?? Please answer me?? Thx bro
Yes you can, you just have to cover it with a tiny bead of lacquer👍
hello, i would like to know what's behind the connection where you put a transistor? where u can touch the paint and use it as a switch
Can i use it as an alternative of conductive fibre or a natural conductor.........?
Thanks for the video. From Cyprus
I want to draw circuit on PCB for buttons like TV remote, calculater . can I use this paint ??????
Yeah
will carbon with water good on plastic? or you recommend waterbase glue?
@@BLUEMOON-xb3jl you need glue to be perfect
@BLUE MOON ,you
How many cell u used for 20 drops of water ?
Would you know the conductivity of this compared to silver conductive paint?
PISS POOR, as being compared to silver print / paint
@@edwardwhatley1603 was wondering the same as i attempt to repaire stove touchpad ribbon cable
Simply outstanding!👍👍👍
Can I mix it with rubber glue.
Does this ink is durable? Does this ink sticks with paper? Or it's erasable ?
Can we use this as a Solar panal
Can I use it to print circuit
'
that new to me about conductive electronic ink / paint...
how many limit volt with battery...
is this electronic same flow as copper wire
Can we do electroforming with this paint?
I join this issue.
is the conductive ink did u use are waterproof?
That's a great video. But does the paint fully dry?
I’m doing this for my science project !!!
What liquid use used to make this paste?
hi the carbon rod won't mix with the water why is that?
also do i mix the grided up carbon rod with the outer black powder ? thanks !
hello???? where r u plz reply
r u buzy
Can i use old batteries in making conductive paint.
Plzzzz replyyy!
Yes
Carbon in batteries doesn’t give you the energy so dead batteries work as great as the brand new one
This is the next generation. Our future
Transistor to a relay to turn on the bulb? How do you wire it and why does it work with touch?
KornShaDoW097 you can watch my this video for more info ua-cam.com/video/L6j3VxvNV5c/v-deo.html
Can we use it for shielding?
That’s what I use it for, in guitars.
@@alexcorona did you find it as effective as aluminium foil?
Aatik, When you touched the ink with your finger, the lamp went on, can I replace lamp with a turning dynamo ? can the touching process works with turning a dynamo circuit ? thanks
why not, it tranfers the electrons mate
@@MrRobot-vc2gk thanks make
please make full video on touch switch........................
Dude that pasty stuff in batteries isn't carbon, it is MnO2 (manganese dioxide).
is activated carbon different than normal carbon.?
Yes
Hey can you tell me if this conductive paint conducts AC current as well?
yes!! Of course
Aatik's lab
But how
I've tested but it only produces sparks
Y would u use it with AC current ?
If u want to control any appliance you can use relay with transistor
the difference between ac and dc is that ac changes the polarity every 60 seconds, so it's pretty much the same thing on the wire. if you're thinking of ac from the wall, the main problem is not ac, is the voltage, which can cause the paint to heat up. i reccomend painting in something fireproof, with many layers of paint. it's still not optimal, if you plan doing something lilke controling an appliance, you can use wires, and a relay. closing/shooting a circuit will cause sparks in both the paint or copper wire, because the eletricity starts flowing before it has an optimal contact, witch creates resistance, and thus heat, melting metal and creating plasma, creating these sparks. also be sure to wear ppe and follow your local regulations for eletric instalations
Hi nro. I want to make a digital counter. How to do ?
how did you grind the carbon? By the way great video!
Use hammer or and solid piece of rock just any thing. But don't use food utensils for grinding.
Graphite powder
Haha. Feels like I'm watching greatscoot chanel youtube
not very sutile ripoff :D
Nice video,
But I was hoping it was going to be a video to make conductive paint
to paint on the wall using cheap Walmart paint..lol
So that I could EMF ground my bedroom...lol
Because that store bought shielding paint is to high..lol
I like the finger to the light bulb...
Thanks for sharing.
Can we use it to make ultracapacitor?
No
Hi can we add dyes to color it
Isn’t it dangerous to open a battery like that?
Does it really works?
Does it smell?
How many batteries did you use to make the paint ???
well i use 4 cells but it actually depends on the quantity you want to make
+Aatik's lab How do u grind that
The bulb turns on cause he is creating a path way for the current to travel when he touches the paint as is hand touches the black small clamp!
Tell me how to make White colour ?
I want to draw circuit on PCB for buttons like TV remote, calculater
NO it doesn't work that way
Buy and use a product already made for restoring those contacts . . . . or CRT aquadag coating . . . . . .this mix is not durable and develops micro fissures when dried out.
This did not work for me. I used old exhausted batteries of a cheap brand, extracted the black stuff, ground it, and added tap water until I got a mix density visually similar to the one in the video.
I want to apply it on my piano keyboards pcb becaus the keys are not responsive. Will it explode like that?
Is there a list of materials and quantity do this experiment , ? Student I work with wants to do this for science fair what will she need ? Are there any any hidden steps ?
how did it went?
Can't it work if we color it ???
Amazing...
How did u make the bulb glow by touching the conductive paint?? It's an emergency can u plz reply fast and show the circuit u made?
SAVANI NAGARKAR watch this video of mine
ua-cam.com/video/L6j3VxvNV5c/v-deo.html
What does the other end of the wire touch
Hey, thanks for the video! Can you use it to repair rear window car deffoger grid? In my case I have a few broken grid lines. Do you think that will work?
Use a MUCH-MUCH-MUCH-MUCH-MUCH better product, as is being sold at auto supply stores . . .metallic based with LESS resistivity and is being much more robust.
Tell the truth buddy… carbon rod conducts bcoz atoms are closely packed & touch oneanother… when powdered no matter how fine particles are it will not conduct. The water is conducting here, after few minutes h2o evaporate, u can do this with sand… Try aluminium paint which is permenant.
Good
Sir please tell me this touch circuit diagram please sir
O bolbe na.
Hey can you tell me the full circuit of the touch bulb
Saurabh Sharma full video on this topic is coming soon :)
Can you make it before 25 june
I liked your video sir
It worked sir
Brilliant
چه ماده ای بهش اضافه میکنه
Thanks
Thank you sir
Plz make a touch switch
It doesn't working, What I do
I want all items names and its list for a competition
“0 resistoance” even though there is like 60ohm
Oh man, don't dissaemble batteries if you don't know what you are doing! Where is your PPE?
Btw I tried it band it didn’t transfer a single amp
NO it can't be used to turn high power loads. You can only pass few milli-amps through it. Just to light up an led, provide signal to a micro controller or to the base of transistor
Here watch the second part for more info ua-cam.com/video/L6j3VxvNV5c/v-deo.html
I didn’t understand what kind of cell to use
Carbon zinc type
Hello can you revert with email regarding the switches.
Thank u boss
Did anyone else tried this and didn’t work?
RIP capacitor
I coat my PLA 3d prints so I can electroplate them in metals.
Does it work? I was thinking of trying myself...
@@NdumN have you tried that? Did it work for electroplating 3d prints?
@@Shad0wCitizen I wish I could say yes, but I have too much projects in my head... 😅
Warning to anybody that wants to do this. The paint that he made in this video is very dangerous. The Manganese dioxide (the powder from the battery) is a fire hazard. So this recipe is not recommended.
NOW . . .some intelligent feedback is coming in !
Touch switch making
❤❤😅😅😅🎉🎉🎉🎉❤❤❤❤❤
0:29 😂 doesn't look like zero resistance to me
a superconductor, nearly.. 😁
Lol .my mom raised me by telling batteries are like bomb since childhood I'm afraid of it.but u ripped battery nothing happened. Now I'm overwhelm. 😫😫😫😫😫
Lithium ion batteries are more dangerous compared to other Rechargeable batteries.
Li>alkaline>ni-mh>ni-cd>normal batteries(non-rechargeables
Whats with last day on earth?
Not working