Building a Cyclone Dust Collector - DIY
Вставка
- Опубліковано 28 лис 2018
- You can see how to easy build a simple dust collector in this video. I made a dust collector from two plastic buckets.
#cyclone #seperator #dustcollector #diy #homemade #cyclonedustcollector
Subscribe ua-cam.com/users/greensaw?sub...
My website : www.greensawdiy.com
➤Join : / @greensaw
Play lists:
DIY Power tools : • DIY Power Tools
WoodWorks : • Wood Works
How to ? : • How to make ? - Навчання та стиль
It may not win any beauty contests, but it works, and that is a win any day!
Nice comment ! Pinned :) Thank you Joe, regards.
Get this guy an ultrasonic cutter for Christmas!
Joe Dance ... the BEAUTY CONTEST ?? ...hmmmm .. is an matter of taste i'm former perfectionist , precision technician stanislawcollection.com .i'm 63 now and still keep going trough stages regarding compromise between artistic cutting corners taste and quest for precision /perfection ... it depend on day and how much coffee i drink that day ..i'm different now and i love this dust collector not just for its functionality but also as piece of art ... spontaneous improvisation which today is more precious as it is ..done by hand out of laying around (home depot , fries ) components .
No way i would buy now for big bucks professional industrial cyclon separator .. not today and not next month .. it may change if i see my neighbor get one and i get jealous but ..f... da neighbor ..i like this one better made out of buckets ! Yo 4 real !!
très bien bon travail merci de la france
Сразу видно иностранец
De lo mejor que he visto como artesania. Simple, sencillo y eficaz. Muchas gracias por compartirlo
Well done, simple and clear instructions. Thank you for posting.
You're some kind of everyday genius and a hero of necessity! RESPECT and Gratitude!
Molt bó i funcional, espectacular feina y sorprenent resultat !! 👍👍👍
TOTAL GEIL!!!!!! Vielen Dank!
It was fun to watch. To empty the canister, you have to take off all the wing nuts, which over time may enlarge the holes and you lose the vacuum seal.
Also it is not practical. It is better to use toggle latches I think.
Very smart idea , to make a cheap cyclone dust collector
Excelente trabajo, limpio y funcional....muchas gracias por compartir, recibe cordiales desde Aguascalientes México!!
Gracias
Çok makbule geçti Teşekkürler
Beleza PURA, mais uma ideia genial para ser implementada. 👍👍👍👍👍👏👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
I love your jigs and DIY setup.
Thank you Michael...
Felicitaciones y gracias por compartir el vídeo, está excelente. Saludos cordiales desde Quito Ecuador.
Gracias.
Bahut sohni ਵੀਡੀਓ aa veere
Amigo excelente tutorial muy ingenioso interesante. Útil. Gracias por compartir tus conocimientos saludos desde Colombia
Hey man, you really put some efforts to build this cyclonic dust collector. As Joe Dance commented, you probably wouldn't win the contest for the beauty, but for efficiency, you definitely would be at the very top👏👍
отличный циклон. спасибо. лайк
Yine çok güzel bir iş çıkarmışsınız, tebrik ederim. Videolarınızı çok beğeniyorum. Benim de böyle bir talaş toplayıcısına ihtiyacım var bir defa yaptım ama borunun çapı daha dar olduğu için benim yaptığım sorunlu oldu. Kalın talaşlar tıkadı. Sizin ki geniş boru olduğu için daha kullanışlı olmuş.
maker202 teşekkür ederim
Wish I could make stuff this fast
Isn't it amazing what you can do with time lapse?
Nota 10. Obrigado.
Muito legal!👏🏼👏🏼👏🏼👏🏼👏🏼
Fantastico idea brillante
Çok güzel! Tesekur.
Ben tesekkur ederim
I like this Video. Super.
un grand bravo de france
Muy buenos tus videos. Ya he visto varios. Gracias por compartir. Saludos desde el sur de Argentina
Gracias
Great proof of concept. Just needs better materials and scale up for workshop.
Fico top
Good idea and well within the DIY ability👍👍
Love the fact you kept the bucket handle on it means if you need to replace it can still be used for its original purpose👍😁
Have no idea how but think the wing-nut idea needs updating to something less labour intensive.
👏👏👏👏👏
I enjoyed the well thought out plan.The quality and precision of your build. The one and only thing that bewilders me is why you did not use a metal bucket that would not collapse.
May be better a metal bucket than a plastic bucket. I had a plastic bucket and didn't want to buy a new bucket. Believe me I have been using it for a long time and I am very pleased ..
I suspect cost may be the factor 🤔
Добрый день сделал подобное но намного проще посмотрите
Complimenti ottimo lavoro!!! Wonderful work !!! Compliments!!!
g t
Thank you so much. I'm glad you like it.
Excellent! I've watched several of these videos for building a cyclone but this is the TOPS. I was wondering, for the sake of neatness if silicone sealant would be good to use for the external sealing of joints rather than the glue gun? Glue becomes solid quickly whereas silicone sealant has adhesive properties but is liquid for several hours so that we may just neaten up the seal. Thanks mate, I'll be looking at following your excellent methods of build
Thank you Allan H, yes I think silicon can be tried. My next project is 3 in 1 table, coming soon. Please follow me.
No worries mate, I have a crap table saw. I'm hoping you might help me out with you also. Ill certainly be following your future stuf.
Parabéns pelo teu trabalho, jesus Cristo continue te capacitando sempre 🙏
Ustam alkışlar sizin için
excelente solución, tengo una mini aspiradora y con tu idea soluciono el poco espacio para recolectar el polvo. Gracias desde Caracas Venezuela
Gabriel, gracias por tu lindo comentario.
@@GreenSawhola buenas noches, hice algo parecido pero hace demasiado ruido, desconecto una de las mangueras de succión y deja de hacer el ruido solo se escucha el ruido normal de la aspiradora, algún aporte para solucionar ese tema? gracias!!!
Great job! Very well thought out. My question is every time you want to empty that small bucket you have to take out all those wingnuts and washers?
:) Yes, I do this every 15 days.
TE HAS COMPLICADO MUCHO LA VIDA PARA HACER UN CICLON.
Realmente fabulosa
Projeto é Bom, falta Capricho
You have given me inspiration to create my own cyclone system in small size and on a budget. Now If the wife will just turn her head long enough for me to abscond with her flower pot I am on my way.
fix anything with tiewraps and hot glue, i totally feel you bro... :p
Ho copiato, somiglia, un pochino brutto, ma aspira da paura. Grazie Maestro
Bravo, tebrikler! Teşekkür ederim ve ben Tulcea_Romanya 'dan selamlar gönderiyorum!
Merhaba, teşekkürler.
i like the concept and the build, but I feel like some liquid nails or even some silicone and using a standard 5 gallon bucket with the lid for a seal would have made it way stronger and effective.
Muuuuito maassssa.
Lo que no has enseñado es la aspiradora que seguro tenía restos que cuando estabas aspirando se veían moverse dentro😂😂
Many would not understand but this was great fun to watch! Thank you RCTURKA.
Hi Cachou LePitou, thank you for your nice comment.
great
хорошо сделал, ...
Collected a cyclone. I connected a 5 meter hose with a diameter of 22 mm. and a wild whistle appeared.Tell me how to solve this problem with whistling???
Genial ,pero alguien tendria que hacerlo para los que no tenemos toda esa maquinaria
@ around 13:36 you can see debris spinning around the vacuum canister. In the end you show a vacuum canister that is completely empty. I call this a fail. Good build and thx for sharing.
I saw the same
If you look closely thats the reflection of the hose.
@@g3ldrithno es el reflejo de la manguera, que dentro se ver moverse las virutas del serrín
0:47 attach a drill under a table upward with my largest drill bit coming through the table. Just like show in the video, drill a large hole on the outside of the plywood for the table drill bit to cut the circle, don’t forget to use a small drill bit to drill a small hole in the center for a nail to hold it in place.
Доброго здоровья. Крепление циклона к ведру крайне неудачное!
what about the pressure sucking in the walls of the receive bucket, looks like the bucket needs some reinforcing to avoid it collapsing ~
Nice. but I would have used a old food barrel, so you already had the lid and it was easier to take of.
Very good! Thank you.
Thank you, Robert.
Muy bueno, solo como aporte yo le agregaría un poco de agua al tacho para asegurarme que de ninguna forma me pueda tapar el filtro de la aspiradora, saludos de Argentina
Hola, gracias por tu consejo. Saludos.
보통 일이 아닙니다.
Can you please put the supplies and tools you used to make your shop vac. Thank you
Cok begendim elinize saglik. Yeni vidyolari bekliyoruz
Teşekkür ederim yeni Videolar gelecek
borularin çap ölçüsü nedir acaba yazarmisiniz
Для очистки ёмкости замучаешься откручивать эти барашки... Проще притянуть резиновым ремнем , обмотав его пару раз через конструкцию. Опыт.
Спасибо за ваш комментарий и совет.
Да он ещё и отверстия под барашки похоже на глаз насверлил, не выдерживая одинаковый угол, так что только в 1 положении можно будет собирать. Для любителей пазлов конструкция
A good start, but here's a couple of suggestions. Make the cone longer, at least 1.5x the larger diameter of the cone. Get rid of the screen on the exhaust pipe - it really cuts down the the airflow. And as much as possible shorten the hose from the cyclone to the vac.
Bob Blarney รถส
Дякую.
Alttaki büyük kovanın etrafına beyaz birsey yapistirdiniz o nedir
9:34 dekini mi soruyorsunuz ?
How to make core cutting dust water vacuum?
The best seen so far but too difficult for me.
Mama mia!
To be more useful use s i use paper clamps to hold the big bucket . you need only 2 , because the suction do the rest .
nice idea :) thanks.
Есть технические Вёдра на 20, л, с герметическоой крышкой 6 секунд сня или закрыл / ВАШЕ ВЕДРО З ДНЯ ОТКРЫТЬ ЗАКРЫТЬ /
well done. but why you din't show how much dust catched the vacuum cleaner through the cyclone?
Seria mais fácil usar o aspirador .
Класс) а я вот купил себе моющий пылесос Thomas
not bad for a caveman
There was dust in you vacuum cleaner bowl but when you showed it to the camera it was clean ..
FORGET the wing nuts! Just use 3 small spring clamps to hold it on to the pail.
Good idea !
Большую крышку к ведра я не закрепил ничем. Фрейзером и конусной фрезой пдогнал так что крышка входит в ведро наполовину своей толщины, а вакуум делает своё дело обеспечивая герметичность. Да и снимать крышку можно без лишних операций!
Hocam merhaba kanalınızı yeni keşfettim ve ilk başta Türk olduğumuzu fark edemedim bile. Cok basarili işler yapmışsınız, tebrik ediyorum. Nacizane bir tavsiyede bulunmak isterim. Bu projeniz için süpürge yerine tepe kısma yerlestireceğiniz bir salyangoz fan çok daha ergonomik ve işlevsel olabilir. İhtiyaç duyarsanız, fan ve daha bir sürü elektronik parçaya cok ucuza temin erisebileceginiz birine yönlendirebilirim. Buradan söylemeniz yeterli, kanalınıza abone oldum ve ilgiyle takip edeceğim sizi bundan sonra...
Merhaba, yaptığım işleri beğenmeniz beni mutlu etti, teşekkür ederim. Salyangoz fan tavsiyeniz gayet güzel ve iş görür. Sadece bir konuya dikkat etmek gerekir diye düşünüyorum. Eğer ekzost dışarı verilecek ise sorun olmayabilir ama çalışılan ortama verilecek ise bir filtre düzeneği kurulması gerekir. Kendim ahşaptan bir tane salyangoz fan yapmayı planlıyorum ama henüz bir girişimim olmadı. Uygun satın alma imkanı olur ise tavsiye edeceğiniz satıcıdan almak isterim. Yönlendirme yaparsanız sevinirim. Diğer videolarımı da seyretmenizi tavsiye ederim. En derin saygılarımla....
Teşekkür ederim, mesajınızı aldım. Telefon ve kişi bilgisi bana ulaştı.
Таким же методом КОНДИЦИОНЕР, ВЕДРО ХОЛ,, ВОДЫ сверху мало мощный вентилятор в Крышке в Доме свежо
Hi! Amazing Video! I'm a Cyclone Dust Collector Newbie even though I'm now a Senior Citizen! What point am I missing here with your DIY Superb Construction? I own a 1.5 Horsepower Genie 5 Gallon Wet n Dry Shop Vac from 1989 and it does exactly this kind of dust/debris/sawdust pickup all day long. Did you build your Dust Collector because your Shop Vac looks like it holds no moe than one gallon (even though I'm positive your Horsepower must be twice that of my New Wave Shop Vac)?
The purpose of a dust collector is to put most-like 99%- of the dust and debris into the bucket, instead of your shopvac, thereby keeping the filter cleaner longer. The cleaner you keep the filter, the longer you'll have maximum suck on the vacuum. However, as impressive as it was to watch him make this, plastic dust collectors from China can be bought on ebay for around $20.00, so this seems like a lot of work to me. Get one of those, a 5 gal bucket, some nuts and bolts and a half hour of time, and you've got one.
the point is that the dust and debri do not make it to the vacuum, and so do not clog up the filter. The dust collector is easier to clean, and collects most of the stuff vacuumed up, which makes the shop vac filter last much longer
Всё есть ... Только пылесоса нет:)
Надо без шурупов и болтов за секунду открыть
А сепаратор где?
Que potencia es la aspiradora
My dust collector: ua-cam.com/video/YynQCLYCYJ0/v-deo.html
У всех самодельных циклонов один недостаток: ослабление мощности воздушного потока.
Nice one mate! Actual DIY - not buy the parts from ebay DIY'ish.
A pregunt... i can used a aspiradora of 1 hp
est-ce qu'un seau en plastique résiste à la dépression? Il ne se déforme pas?
Vous pouvez choisir un seau robuste. Je n'ai eu aucun problème à l'utiliser.
it will only "deform" (or implode) if you keep the nozzle completely covered. if there is room for air at the nozzle, it should not be a problem :-)
@@felixreali7101 désolée de répondre en français
Cela n'est pas réaliste puisque le système fonctionne sur le vide d'air. Si le contenant n'est pas hermétique il ne sert a rien et les copeaux vont dans l'aspirateur !
@@danav4810 je ne comprend pas votre message. Le systeme a l'air bien etanche, d'ailleurs on voit le seau se deformer lors de l'essai!
@@alphazorg2183 j'ai réagi à la réponse de Felix Reali qui suggère de laisser une prise d'air dans le tuyaux pour éviter la déformation du contenant en plastique
Зря он под давлением сам будет держаться
Espectacularrr pero si yo le digo a mi señora amor me vacías el tacho de la aspiradora la prende fuego saludos.
2 киловатта на пылеулавливатель, это перебор.
Empty it its to much work.
For euro 25,- there is a original cyclone.
I guess you spend more money on the self made.
Anyway great job.
Thanks, Marco. I didn't spend any more money. Also this is a DIY (Do it yourself) video :) Money doesn't matter!
Где бы ещё фрезер взять
ДА.... В РОССИИ ТЫ ОСТАЛСЯ БЕЗ РАБОТЫ. ТАКОГО ПЕРЕМУДРЕНОГО ЦИКЛОНА Я ЕЩЕ НЕ ВИДЕЛ)
I got wore out just watching. Considering how cheap these things have become, especially when on sale, I'll just buy one.
Con dinero cualquiera es vivo..!!
Don’t know if it works good as we didn’t see what got past into the vacume
You need a de-burring tool ...
Сложно. Такая штука делается из ведра из под краски или подобного и двух 50мм канализационных уголков, буквально за 15 минут.