These files were victims of their success, we don't have any in stock for the moment, we are in the process of improving our production system to serve you at best.
Hello, our dealer for Italy is SERMAC S.R.L VIA GALILEO GALILEI 4 ZONA INDUSTRIALE RAME 42046 REGGIOLO RE Téléphone : 0039 0522 971 799 Fax : 0039 0522 972 970 info@sermac.net www.sermac.net We remain at your disposal for any further information.
You should be Sharpening INTO the Tooth. Not out of it!! You might get a sharp edge, but it won't stay sharp for long. The reason for this is the same as it is for sharpening a knife, or razor. When you sharpen into the tooth/blade, it forces the Edge Feathers in, for better Edge Alignment. Vs when you sharpen out of the tooth/blade. You may think you have a sharp edge, but it is the Feathers that you feel. As they have been forced out. As you use your Saw, these Feathers are ripped off. Thus causing your Chain to dull faster. Causing you to have to take more time Sharpening, than Cutting. I hope this helps you, as much as it has helped me. ~Timber Miner Tony T.
Thank you for your comment Tony, we do appreciate feedbacks from professional timbers on our videos. As you certainly aware, we posted several didactic videos on how saw chain sharpening should be performed. In the practice, users could adapt these technics to their own application to obtain best results in the woods. This particular video was made for this purpose, we wanted to share with you not only a method but the results you’re obtaining using a double chisel bit file, of course you can turn the direction of filing around if you wish, however the scope here was to demonstrate a way to be more precise and repetitive while filing. Enjoy your sharpening Tony and your comments will be always welcome.
I understand your point- the difference is a saw tooth has a chrome coating A knife does not. It’s the chrome that gives the cutting edge its strength. No file can cut chrome. It’s too hard. The files are $12- $14 each. The file will last much longer if you file out of the tooth.
Some filers file into the tooth. It cuts a slightly cleaner edge. Some people prefer to file in the other direction. They do this so the hard chrome is not driven into the file. This helps preserve files. I have done it both ways with 50 plus man crews, the production gained from filing into the tooth did not outweigh the cost of replacing files, so we file out.
Hello, our dealer for Hungary is Renbert KFT UTÁR U. 12.1. EM. 2 1131 BUDAPEST Phone: 0036 1 783 43 01 Fax: 0036 1 799 27 03 kalman.nemeth.1131@gmail.com We remain at your disposal for any further information.
@@lorenzodomenighini8111 Our dealer for Italy is SERMAC S.R.L VIA GALILEO GALILEI 4 ZONA INDUSTRIALE RAME 42046 REGGIOLO RE Téléphone : 0039 0522 971 799 Fax : 0039 0522 972 970 info@sermac.net www.sermac.net We remain at your disposal for any further information.
Hello, Our distributor for United States is AHLBORN EQUIPMENT, INC. FEDERAL I.D.# 20-2826285 PO BOX 500 2924 STATE HWY.155 545600500 SAYNER Phone: 001 715 542 3271 Fax: 001 7155423267 woody@ahlbornequipment.com www.ahlbornequipment.com
@@vallorbeswiss-usinesmetall2937 -- how do I get some to my friend Buckin Billy Ray on UA-cam? Shipping from the US to Canada is pricey. He's in Canadian in Nanaimo, BC. Thank you! :0)
@@FRUNTCASTER Hello, Sorry for our late reply. You can buy chisel bit files from next week to our distributor FORNEY WELDING EQUIPMENT & SUP ATT. GERANT GENERAL 140 - 5TH AVENUE EAST S4N 5A1 REGINA Phone: 001 306 569 9083 Fax: 001 3065653177 mike.forney@accesscomm.ca If you need others Vallorbe Swiss forestry products, you can contact Laser sales INC 1717 OXFORD ST. E. N5V 2Z5 LONDON Phone: 800-265-9243 Fax: 001 5194527000 rmcgee@lasersales.org www.lasersalesinc.ca
@@FRUNTCASTER does BBR have all you brainless idiots programmed to buy him free stuff or you just love the taste 👅??? It’s honestly beyond me why all of these people warship this guy.??? The only reason for his channel is to make money and you guys are throwing it at him.?? He sell incredibly stupid stuff and you drones can’t buy it fast enough. Step back and see things for what they are? A money making scheme nothing more
Wir danken Ihnen für das Interesse in unseren Produkte. Sie können unsere Feile direkt bei unserem Vetreter in Deutschland bestellen. Folgend finden sie die Kontaktinformation : GRUBE KG FORSTGERÄTESTELLE HÜTZELER DAMM 38 29646 BISPINGEN/HÜTZEL Téléphone : 0049 519 490 00 Fax : 4.95195E+11 Bastian.Goetze@grube.de www.grube.de
@@vallorbeswiss-usinesmetall2937 Danke, habe verstanden. Ich bin zunächst davon ausgegangen, dass es nicht erhältlich ist, wenn es nicht im Katalog erscheint.
Hello, We are sorry, but Hexa files system belongs to Stihl. You can find a distributors in your country on their website corporate.stihl.es/ We wish you a beautiful day.
Hello, this Vallorbe files is a Chisel bit double - Ref : LC10020-2279-8 We have also Chisel bit Vallorbe shape (LC10020-2270-7) and Chisel bit file three square (LC10020-2276-8). You can find more informations on our website : www.vallorbe.com You can find a retailers in Spain on our website : www.vallorbe.com/es-es/distribuidores Wish you a beautiful day.
Thank you for your interest in our product. You can find and contact one of our dealers in your country to buy this file on our website : www.vallorbe.com/en-ch/dealers
Cześć, Dziękujemy za zainteresowanie naszymi produktami. Nasz polski dystrybutor niestety nie ma plików na stanie. Poniżej znajdziesz dane kontaktowe naszego dystrybutora na Słowacji, który musi mieć: ENERPO S.R.O. VISNOVA 6516/8 8001 PRESOV Telefon: 00421 915 882 849 potocnak.igor@gmail.com Hello, Thank you for your interest in our products. Our Polish distributor unfortunately does not have the files in stock. You will find below the contact details of our distributor in Slovakia who must have some: ENERPO S.R.O. VISNOVA 6516/8 8001 PRESOV Phone: 00421 915 882 849 potocnak.igor@gmail.com
These files were victims of their success, we don't have any in stock for the moment and our retailer in Russia didn't order yet this files. You can contact our retailer in Slovakia, he must have chisel files in stock ENERPO S.R.O. VISNOVA 6516/8 8001 PRESOV Phone: 0042191588 2849 info@zaberoveretaze.sk www.zaberoveretaze.sk
@@vallorbeswiss-usinesmetall2937 I have visited this site. There are no such files either. I'll try to contact my brother in Germany. Maybe he will find it.
Hallå, Tack för ditt intresse för våra produkter. Nedan hittar du kontaktuppgifter för vår distributör i Ryssland: URALOPTINSTRUMENT LTD 6, Lesozavodskaya Str. 614068 PERM Telefon: 007342237 16 52 Fax: 007342237 16 54 anton@uralopt.ru www.rezer-rus.com För närvarande har vår dubbla mejselprodukt varit ett offer för dess framgång och kommer att finnas tillgänglig igen inom några månader. Tack för att du förstår. Vi står kvar till ditt förfogande för ytterligare information. Hello, Thank you for your interest in our products. You will find below the contact details of our distributor in Russia: URALOPTINSTRUMENT LTD 6, Lesozavodskaya Str. 614068 PERM Telephone: 007 342 237 16 52 Fax: 007 342 237 16 54 anton@uralopt.ru www.rezer-rus.com Currently, our chisel bit double product has been a victim of its success and will be available again within a few months. Thank you for your understanding. We remain at your disposal for any further information.
Cześć, Dziękujemy za zainteresowanie naszymi produktami. Nasz polski dystrybutor niestety nie ma plików na stanie. Poniżej znajdziesz dane kontaktowe naszego dystrybutora na Słowacji, który musi mieć: ENERPO S.R.O. VISNOVA 6516/8 8001 PRESOV Telefon: 00421 915 882 849 potocnak.igor@gmail.com Obecnie nasz produkt z dłutem dwubębnowym padł ofiarą sukcesu i za kilka miesięcy będzie ponownie dostępny. Dziękuję za zrozumienie. Pozostajemy do Państwa dyspozycji w celu uzyskania dalszych informacji. Hello, Thank you for your interest in our products. Our Polish distributor unfortunately does not have the files in stock. You will find below the contact details of our distributor in Slovakia who must have some: ENERPO S.R.O. VISNOVA 6516/8 8001 PRESOV Phone: 00421 915 882 849 potocnak.igor@gmail.com Currently, our chisel bit double product has been a victim of its success and will be available again within a few months. Thank you for your understanding. We remain at your disposal for any further information.
@Federico D'andrea @Mario SuperTramp Buongiorno, Grazie per l’interesse nei nostri prodotti. Lei puo comprare questa lima dal nostro distributore in Italia, la ditta SERMAC S.R.L VIA GALILEO GALILEI 4 ZONA INDUSTRIALE RAME 42046 REGGIOLO RE Téléphone : 0039 0522 971 799 Fax : 0039 0522 1847 626 info@sermac.net www.sermac.net
Salve buon giorno ho contattato tutti i vostri rivenditori qui in italia, ma fino ad oggi nessuna risposta x acquistare le vostre lime . io sono l amministratore di un gruppo su FB abbiamo tutti lo stesso problema in Francia Germania ,spagna vi allegò foto del gruppo, com'è possiamo fare x acquistare queste lime, visto ché i rivenditori fanno orecchie da mercante siamo più di mille in questo gruppo. Grazie.
Buongiorno, Siamo consapevoli del problema riguardante la distribuzione delle nostre doppie lime a scalpello. Stiamo cercando una soluzione per renderle accessibili ai nostri utenti. Può darmi il nome del Suo gruppo su Facebook per favore? Grazie in anticipo .
Gracias por su comentario, No estamos seguro de haber entendido bien su comentario. Piensa que no es fácil adquirir estos productos en Brasil o que esta práctica no se hace en Brasil? Podemos contestar a todas sus demandas o nuestro revendedor en su país, A la espera de sus gratas noticias, le saludamos atentamente Cordiales saludos,
Hello, our dealer for Italy is SERMAC S.R.L VIA GALILEO GALILEI 4 ZONA INDUSTRIALE RAME 42046 REGGIOLO RE Téléphone : 0039 0522 971 799 Fax : 0039 0522 972 970 info@sermac.net www.sermac.net We remain at your disposal for any further information.
I appreciate these videos from manufacturers showing the intentions of the file that gave them their shape.
very experienced, spirit of work always puts safety first
Why do you leave the “birds beak” ?
The side and top should meet at the working corner.
Why did you put the 45 degrees mark on the bar looks like your way off from a 45?
You guys should make them a little easier to buy?? Excellent files, but nearly impossible to find.
These files were victims of their success, we don't have any in stock for the moment, we are in the process of improving our production system to serve you at best.
When does a person file square chains with this file vs. the tri-side file?
Where can I buy this file in Italy? Thank you for your answer, I would need to know thanks,
Hello, our dealer for Italy is
SERMAC S.R.L
VIA GALILEO GALILEI 4
ZONA INDUSTRIALE RAME
42046 REGGIOLO RE
Téléphone : 0039 0522 971 799
Fax : 0039 0522 972 970
info@sermac.net
www.sermac.net
We remain at your disposal for any further information.
Many thanks, I've filling the reverse of this. Will sort it out.
You should be Sharpening INTO the Tooth. Not out of it!! You might get a sharp edge, but it won't stay sharp for long. The reason for this is the same as it is for sharpening a knife, or razor. When you sharpen into the tooth/blade, it forces the Edge Feathers in, for better Edge Alignment. Vs when you sharpen out of the tooth/blade. You may think you have a sharp edge, but it is the Feathers that you feel. As they have been forced out. As you use your Saw, these Feathers are ripped off. Thus causing your Chain to dull faster. Causing you to have to take more time Sharpening, than Cutting. I hope this helps you, as much as it has helped me. ~Timber Miner Tony T.
Thank you for your comment Tony, we do appreciate feedbacks from professional timbers
on our videos. As you certainly aware, we posted several didactic videos on how saw chain sharpening should be performed. In the practice, users could adapt these technics to their own application to obtain best results in the woods. This particular video was made for this purpose,
we wanted to share with you not only a method but the results you’re obtaining using a double chisel bit file, of course you can turn the direction of filing around if you wish, however the scope here was to demonstrate a way to be more precise and repetitive while filing.
Enjoy your sharpening Tony and your comments will be always welcome.
I understand your point- the difference is a saw tooth has a chrome coating A knife does not. It’s the chrome that gives the cutting edge its strength. No file can cut chrome. It’s too hard. The files are $12- $14 each. The file will last much longer if you file out of the tooth.
Some filers file into the tooth. It cuts a slightly cleaner edge. Some people prefer to file in the other direction. They do this so the hard chrome is not driven into the file. This helps preserve files. I have done it both ways with 50 plus man crews, the production gained from filing into the tooth did not outweigh the cost of replacing files, so we file out.
Please, give a link on this goods. I want to buy it.
Where can I buy these files in Hungary? Thank you for your answer.
9211104594
Hello, our dealer for Hungary is
Renbert KFT
UTÁR U. 12.1. EM. 2
1131 BUDAPEST
Phone: 0036 1 783 43 01
Fax: 0036 1 799 27 03
kalman.nemeth.1131@gmail.com
We remain at your disposal for any further information.
@@vallorbeswiss-usinesmetall2937 where can i buy this file in Italy thank for your answer.
@@lorenzodomenighini8111 Our dealer for Italy is
SERMAC S.R.L
VIA GALILEO GALILEI 4
ZONA INDUSTRIALE RAME
42046 REGGIOLO RE
Téléphone : 0039 0522 971 799
Fax : 0039 0522 972 970
info@sermac.net
www.sermac.net
We remain at your disposal for any further information.
Would like to find a distributor for these in the United States. I sell bars and chains and folks have asked about these files...
Baileys online
Hello,
Our distributor for United States is AHLBORN EQUIPMENT, INC.
FEDERAL I.D.# 20-2826285
PO BOX 500 2924 STATE HWY.155
545600500 SAYNER
Phone: 001 715 542 3271
Fax: 001 7155423267
woody@ahlbornequipment.com
www.ahlbornequipment.com
@@vallorbeswiss-usinesmetall2937 -- how do I get some to my friend Buckin Billy Ray on UA-cam? Shipping from the US to Canada is pricey. He's in Canadian in Nanaimo, BC. Thank you! :0)
@@FRUNTCASTER Hello, Sorry for our late reply.
You can buy chisel bit files from next week to our distributor FORNEY WELDING EQUIPMENT & SUP
ATT. GERANT GENERAL
140 - 5TH AVENUE EAST
S4N 5A1 REGINA
Phone: 001 306 569 9083
Fax: 001 3065653177
mike.forney@accesscomm.ca
If you need others Vallorbe Swiss forestry products, you can contact
Laser sales INC
1717 OXFORD ST. E.
N5V 2Z5 LONDON
Phone: 800-265-9243
Fax: 001 5194527000
rmcgee@lasersales.org
www.lasersalesinc.ca
@@FRUNTCASTER does BBR have all you brainless idiots programmed to buy him free stuff or you just love the taste 👅???
It’s honestly beyond me why all of these people warship this guy.??? The only reason for his channel is to make money and you guys are throwing it at him.?? He sell incredibly stupid stuff and you drones can’t buy it fast enough.
Step back and see things for what they are? A money making scheme nothing more
is available for sale in Brazil ?
Danke für die Anleitung?
Wo kann die Feile in Deutschland oder von Deutschland aus erworben werden?
Wir danken Ihnen für das Interesse in unseren Produkte. Sie können unsere Feile direkt bei unserem Vetreter in Deutschland bestellen. Folgend finden sie die Kontaktinformation :
GRUBE KG FORSTGERÄTESTELLE
HÜTZELER DAMM 38
29646 BISPINGEN/HÜTZEL
Téléphone : 0049 519 490 00
Fax : 4.95195E+11
Bastian.Goetze@grube.de
www.grube.de
@@vallorbeswiss-usinesmetall2937
Danke, habe verstanden. Ich bin zunächst davon ausgegangen, dass es nicht erhältlich ist, wenn es nicht im Katalog erscheint.
Where can I get the magnetic file angle guide, please?
Ebay
Where can I buy hexagonal files for 325 "chain? Greetings from Spain🇪🇸🇪🇸 and 3/8
Hello,
We are sorry, but Hexa files system belongs to Stihl. You can find a distributors in your country on their website corporate.stihl.es/
We wish you a beautiful day.
Where are these files sold?
Hello,
You can find and contact one of our dealers in your country on our website :
www.vallorbe.com/en-ch/dealers
What model of ballorve is that file to order? greetings from Spain🇪🇸🇪🇸
Hello, this Vallorbe files is a Chisel bit double - Ref : LC10020-2279-8
We have also Chisel bit Vallorbe shape (LC10020-2270-7) and Chisel bit file three square (LC10020-2276-8).
You can find more informations on our website : www.vallorbe.com
You can find a retailers in Spain on our website : www.vallorbe.com/es-es/distribuidores
Wish you a beautiful day.
I would like to try these files. Where can I buy them please?
Thank you for your interest in our product. You can find and contact one of our dealers in your country to buy this file on our website :
www.vallorbe.com/en-ch/dealers
@@vallorbeswiss-usinesmetall2937 thanks
I am from Turkey, I need this file
Sir is tool ka naam kya h
Czy w polsce będą dostępne ?
Cześć,
Dziękujemy za zainteresowanie naszymi produktami.
Nasz polski dystrybutor niestety nie ma plików na stanie.
Poniżej znajdziesz dane kontaktowe naszego dystrybutora na Słowacji, który musi mieć:
ENERPO S.R.O.
VISNOVA 6516/8
8001 PRESOV
Telefon: 00421 915 882 849
potocnak.igor@gmail.com
Hello,
Thank you for your interest in our products.
Our Polish distributor unfortunately does not have the files in stock.
You will find below the contact details of our distributor in Slovakia who must have some:
ENERPO S.R.O.
VISNOVA 6516/8
8001 PRESOV
Phone: 00421 915 882 849
potocnak.igor@gmail.com
Model?
You can't buy this in Russia, but there is a desire.
These files were victims of their success, we don't have any in stock for the moment and our retailer in Russia didn't order yet this files.
You can contact our retailer in Slovakia, he must have chisel files in stock
ENERPO S.R.O.
VISNOVA 6516/8
8001 PRESOV
Phone: 0042191588 2849
info@zaberoveretaze.sk
www.zaberoveretaze.sk
@@vallorbeswiss-usinesmetall2937 I have visited this site. There are no such files either. I'll try to contact my brother in Germany. Maybe he will find it.
Hi,yourvideoisverygoodIhavecompletedtheprocedureforyouandtheninteractedwith👍👏
muito bom aprendi muito com este vídeo obrigado muito profissional ótimo o melhor de todos vídeos gue eu assisti
Мне показалось или в итоге этот мужчина точил простым прямоугольным напильником?
Hallå där! Var i Ryssland kan jag köpa en sådan fil
Hallå,
Tack för ditt intresse för våra produkter.
Nedan hittar du kontaktuppgifter för vår distributör i Ryssland:
URALOPTINSTRUMENT LTD
6, Lesozavodskaya Str.
614068 PERM
Telefon: 007342237 16 52
Fax: 007342237 16 54
anton@uralopt.ru
www.rezer-rus.com
För närvarande har vår dubbla mejselprodukt varit ett offer för dess framgång och kommer att finnas tillgänglig igen inom några månader.
Tack för att du förstår.
Vi står kvar till ditt förfogande för ytterligare information.
Hello,
Thank you for your interest in our products.
You will find below the contact details of our distributor in Russia:
URALOPTINSTRUMENT LTD
6, Lesozavodskaya Str.
614068 PERM
Telephone: 007 342 237 16 52
Fax: 007 342 237 16 54
anton@uralopt.ru
www.rezer-rus.com
Currently, our chisel bit double product has been a victim of its success and will be available again within a few months.
Thank you for your understanding.
We remain at your disposal for any further information.
Что за напильник? Класс!
Это напильник - двойной chisel bit для заточки квадратных цепных пил
@@vallorbeswiss-usinesmetall2937 👍
Gdzie w Polsce można kupić taki pilnik??
Cześć,
Dziękujemy za zainteresowanie naszymi produktami.
Nasz polski dystrybutor niestety nie ma plików na stanie.
Poniżej znajdziesz dane kontaktowe naszego dystrybutora na Słowacji, który musi mieć:
ENERPO S.R.O.
VISNOVA 6516/8
8001 PRESOV
Telefon: 00421 915 882 849
potocnak.igor@gmail.com
Obecnie nasz produkt z dłutem dwubębnowym padł ofiarą sukcesu i za kilka miesięcy będzie ponownie dostępny.
Dziękuję za zrozumienie.
Pozostajemy do Państwa dyspozycji w celu uzyskania dalszych informacji.
Hello,
Thank you for your interest in our products.
Our Polish distributor unfortunately does not have the files in stock.
You will find below the contact details of our distributor in Slovakia who must have some:
ENERPO S.R.O.
VISNOVA 6516/8
8001 PRESOV
Phone: 00421 915 882 849
potocnak.igor@gmail.com
Currently, our chisel bit double product has been a victim of its success and will be available again within a few months.
Thank you for your understanding.
We remain at your disposal for any further information.
Dalej nie ma tych pilników w Pl???
Why?
Salve si può avere un contatto in it x l'acquisto di questa lima? Grazie
@Federico D'andrea @Mario SuperTramp
Buongiorno,
Grazie per l’interesse nei nostri prodotti. Lei puo comprare questa lima dal nostro distributore in Italia, la ditta
SERMAC S.R.L
VIA GALILEO GALILEI 4
ZONA INDUSTRIALE RAME
42046 REGGIOLO RE
Téléphone : 0039 0522 971 799
Fax : 0039 0522 1847 626
info@sermac.net
www.sermac.net
Hi Sara 👋
👍👍🤝
Salve buon giorno ho contattato tutti i vostri rivenditori qui in italia, ma fino ad oggi nessuna risposta x acquistare le vostre lime . io sono l amministratore di un gruppo su FB abbiamo tutti lo stesso problema in Francia Germania ,spagna vi allegò foto del gruppo, com'è possiamo fare x acquistare queste lime, visto ché i rivenditori fanno orecchie da mercante siamo più di mille in questo gruppo. Grazie.
Buongiorno,
Siamo consapevoli del problema riguardante la distribuzione delle nostre doppie lime a scalpello.
Stiamo cercando una soluzione per renderle accessibili ai nostri utenti.
Può darmi il nome del Suo gruppo su Facebook per favore?
Grazie in anticipo
.
@@vallorbeswiss-usinesmetall2937 buon giorno. il nome del gruppo su FB è?: bûcherone forestier lima plate. Distinti saluti Federico D'Andrea.
Who can I contact to find these in the United States? I like the file guide also!
@@trucidatore-dp6du non fa nulla se tocchi le maglie tengono fino alla fine della catena.
@@federicodandrea8496 dove si possono acquistare queste lime?
Mantap bro💪👍👍
同じやスリを使っているのにやすり掛け方向が動画によって異なるのはなんなのか
Nice
Good👍
Não acho elas fácil no Brasil PS jhon humilde aprendiz
Gracias por su comentario,
No estamos seguro de haber entendido bien su comentario.
Piensa que no es fácil adquirir estos productos en Brasil o que esta práctica no se hace en Brasil?
Podemos contestar a todas sus demandas o nuestro revendedor en su país,
A la espera de sus gratas noticias, le saludamos atentamente
Cordiales saludos,
A greeting
chainsaw
Where i can buy that in Italy? Best regards.
Hello, our dealer for Italy is
SERMAC S.R.L
VIA GALILEO GALILEI 4
ZONA INDUSTRIALE RAME
42046 REGGIOLO RE
Téléphone : 0039 0522 971 799
Fax : 0039 0522 972 970
info@sermac.net
www.sermac.net
We remain at your disposal for any further information.