I think this is very clever, showing a simple diagram to illustrate how to resolve this particular dilemma - sure beats cutting up parts and still not getting it right!
Hi Kenji, you are so smart! To be able to put this door swing into the computer, and manipulate it for placement is awesome! In past projects, your custom doors always work perfectly. It doesn't matter how long this project takes because everything you do is so fun to watch. Your choice of music is always fresh to listen to during production. Thank you for sharing Kenji, and take care.
Hi Brian, thank you as always. I made this diagram of hinges to give a rough idea of how they change depending on whether the hinge is closer to the front or the back, or closer to the outside or the inside. So I think it will be useful for opening and closing any door.😊
It must be so difficult to get the positioning of the hinge pivot points as precise as is necessary on a body of this type. Thank you once more Kenji-san and best wishes.
I am in the middle of doing something similar to a Tamiya Porsche 911 88. With opening doors, hood and bonnet. I will use some of your ideas to complete mine.
Hi Kenji, great videos. I learned a lot from watching them all. May i ask what is the manufacturer of the scriber you used to scrib the inner door when building the hinges? It has a wooden handle and a long blade. Regards Dave, London England.
Are you referring to a saw with a wooden handle? If so, this saw is from the Czech Republic and was given to me by a Czech person as a gift. Honestly, I don't know much about it.
曲も音もボイスもプラモデル制作も素晴らしい。
このチャンネルは、ただのプラモデル制作動画ではなく、番組自体が一つのアート作品として成り立っていると感じます。
ありがとうございます、嬉し過ぎます😊
Like having the computer for a visual on how the hinges will work. Your engineering always amazes me.
Gute Arbeit, Kenji! Deine Geduld macht sich später bezahlt. 👍🏻
Freue mich schon sehr auf das nächste Video.
チャンネルの落ち着いた雰囲気にマッチした素敵なBGMですね🎵🎹
I think this is very clever, showing a simple diagram to illustrate how to resolve this particular dilemma - sure beats cutting up parts and still not getting it right!
ちょうどアオシマのパガーニ・ゾンダをフル開閉出来る様に改造しようと思ってたのですごく参考になりました。差し替えでの開閉はやった事あるんですが、ヒンジを使っての開閉はハードルが高そうだったので、やった事はなかったです。わかりやすく解説して頂けたので、初めてのフル開閉改造頑張ってみます。
フル開閉頑張ってください!
Sehr schöne Erklärung. Herzlichen Dank.
Viele Grüße aus Deutschland.
PCでの説明が分かりやすい🤭❣️
Hi Kenji, you are so smart! To be able to put this door swing into the computer, and manipulate it for placement is awesome! In past projects, your custom doors always work perfectly. It doesn't matter how long this project takes because everything you do is so fun to watch. Your choice of music is always fresh to listen to during production. Thank you for sharing Kenji, and take care.
Hi Brian, thank you as always.
I made this diagram of hinges to give a rough idea of how they change depending on whether the hinge is closer to the front or the back,
or closer to the outside or the inside.
So I think it will be useful for opening and closing any door.😊
It must be so difficult to get the positioning of the hinge pivot points as precise as is necessary on a body of this type. Thank you once more Kenji-san and best wishes.
Sensei thanks for the Hinge lesson, very useful- i will remember that one.
Amazing build Kenji
お疲れ様です。
ドアの隙間をどのように埋めるのか注目していました。ヒンジ側でなく、ボディー側で処理されていたことが意外でとても勉強になりました。ドアのプレスラインやドアモールの加工は、見ているこちも緊張しました~。
ありがとうございます、ドアを伸ばしたほうが良かったのかなあ…
なんとなくボディ側を直してしまいましたが😅
@@kenji-plasticmodels ドアを伸ばした場合、両側を同時に開いた際に対称な印象にならなくなってしまうので、ボディー側で対処したのは正解だと思いました!
いつも感心しながら見させていただいています。今回、ヒンジの検討&説明に使用したソフトウェアは、なんというものでしょうか?
これはAdobeのIllustratorというソフトです。
[Bow] This is fantastic work!
I am in the middle of doing something similar to a Tamiya Porsche 911 88. With opening doors, hood and bonnet. I will use some of your ideas to complete mine.
Whaaaooo. … I got dizzy from concentration… excellent dose of Engineering… 👏👏👏
Un trabajo asombroso!!!
BGM、素晴らしいです!
學到了!学んだ!
柔らかで静かで、素敵な曲でしたね♪
ドアの開閉はやはり車のプラモデルを作るうえでかなり重要なところだからこそ、
ヒンジの位置とかもしっかりしてないとなのですね(><)
お疲れ様です。
蝶番設計の講義、ありがとうございました。
大変勉強になりました😊
説明に使用されていたのはどこかのCADアプリでしょうか?
回転軌跡が確認できるのはとても便利ですね。
チャンスがあったらドアオープンにも挑戦してみたいです。😅
BGM静かで良いメロディですね。
歳をとっても変わらずハードロックな私ですが、朝の通勤時などは静かめのジャズを聴くことが増えてきました。
動画の邪魔をしない耳に心地良い音だなぁと感じましたよ。
kenjiさんの動画にもマッチしていますね。😊
お疲れさまです。
説明に使っていたのはAdobe・Illustratorというソフトです。
(自分は本業がグラフィックデザイナーなのです)
曲は落ち着いた美しい音色とメロディーでとても気に入っています。
ありがとうございます。
実車のお話。トヨタパブリカデラックス(UP20)はドアを全開にするとせり出したドア前縁がフロントフェンダーのサイドモールを押し潰してしまうという問題がありました。
押し潰すのは笑ってしまいますね🤣
テコの原理で凄い力がかかるので危ないですね。
Hi Kenji, great videos. I learned a lot from watching them all. May i ask what is the manufacturer of the scriber you used to scrib the inner door when building the hinges? It has a wooden handle and a long blade. Regards Dave, London England.
Are you referring to a saw with a wooden handle? If so, this saw is from the Czech Republic and was given to me by a Czech person as a gift.
Honestly, I don't know much about it.
ロック機構にネオジム磁石とか仕込むのですか?
今回はやらないかも…
👍
WWOOWW .,. 😍😍😍😍😎😎😎😎😎🤩🤩🤩🤩