Picked up my Manticore from Fort Bedford Friday. Can't wait for the rain to go away so I can get out to try it on some old permissions! Thanks for the setup Scott!
This setup if you turn down your sensitivity to somewhere between 18-20 should eliminate a lot of iron falsing. This set up is good for any type of hunting really except beach.
Hey, so I’m pretty sure I watched one of your videos probably more than once lol you’re an amazing teacher for this. I started with the legend and now I have the. manticore. My significant other has the equinox 900 and honestly he’s always finding more than me. That’s why I bought the manticore. Ha. I have found that sometimes even though I can get somewhat of a repeatable beep sometimes it’s very scratchy if that makes sense and I get so frustrated. I was wondering if you wouldn’t mind giving me some of your professional settings what I should do for my main, I live in Minnesota And hunting both , lotta deep stuff here as well. I was just using AT general 4 recovery speed. Stabilizer on the preset Ferris limit and I’m still missing stuff. He’ll go over a spot that I didn’t even hear the beep for something. I’m hoping you can help this as my main settings. 🙏 I find lots of clad by the way, and some relics. I’m not new to metal detecting just this manticore.
Thanks for the vote of confidence I appreciate that. For starters, I do like these ferrous limits I reference in the video but I tend to run the machine more now in all metal mode. If you are running in all metal mode, make sure you turn on the Red Ferrous numbers (only matters if you are running all metal mode). If you are in heavy iron we like to hunt with the stabilizer at 2 or 3 (no higher) and we turn on the Iron filter. If you don't have those conditions turn off the filter. You can still run a stabilizer but if you don't need it, turn it off. If you want some more depth, lower your recovery speed down to 2 or 3. As far as sensitivity goes, don't run it too high. We hunt with it at around 20-22. When over a target, turn 90 degrees on it. If the numbers significant change or go away it probably junk, if you turn and you still hear a repeatable target pay attention to the 2D map. You might see a co-mingled target with iron. The manticore overall is a deeper machine than the 900 but it takes some time to understand what its tell you. I've had many members in my Patreon group almost give up on it, but now the majority of them won't put it down. Hope that helps.
@@MentalMetal awesome thank you! I think what confused me too was the ferrous number changes in a couple videos. I think a couple even had a negative number. There’s where I got lost lol.
I used these settings (not that I understand them, lol) and did a quick hunt after work. New park for me. First target was a 1932 silver quarter. Dug some junk. Then, I found an 1887 IHP just as I got rained out. IHP was my first. Saw it laying on the ground after kicking leaves away. Going back to this spot in the morning. Stretch of creek that had several mills along it. Will be running these settings!
Do u think the manticore is better then the CTX3030. They both have up and downs but what’s your opinion? I have the Excalibur II, CTX3030 and the manticore.
So I’m a tad bit confused Scott will it automatically save after you put it in and shut the machine off and turn it back on or is there a way to save it? I didn’t catch that of the video.
Scott, good video, however… 100% beach hunter here, I’ve seen so many videos advising against notching, or adjusting Ferrous limits for fear of missing gold targets. I understand that gold is nonferrous, so that doesn’t seem to make sense to me anyway. What are your thoughts on this?
I hear ya, I use the manticore and have since it was first shipped. I will not notch anything out and yes I dig nails sometimes but I also dig great stuff that sound like iron including small gold. It’s rare but it does happen. Dug 6 gold in one night recently and most sounded like iron with a slight low bump so keep it wide open 👍🏼
@MentalMetal My m8 coil will be quite at a sensitivity of 30 where with the m11 I max out around 25. I'm wondering if there is a problem with the coil.
Did anyone notice those cool headphones (not minelab headphones)?
and????????????
Do you happen to have an x-ray of the coil on the manticore?
Great instructional video Scott!
Glad you liked it! Thanks!
Picked up my Manticore from Fort Bedford Friday. Can't wait for the rain to go away so I can get out to try it on some old permissions! Thanks for the setup Scott!
Hope you enjoy it!
I just ordered one yesterday!!
Awesome!
Thanks! Going to try this setting in my trashy parks and compare with the preset ferrous limits.
Good luck!
@@MentalMetal Ended up digging 11 wheats, 2 IHPs, and a silver Rosie! Thought I cleaned it out before but the new programing worked well!
Cheers mate, good explanation once you got into it. 👌
Thanks!
Thanks for the info. Going to definitely try.
Good luck!
Thanks for the tutorial! Can you give us an example of when this would be useful?
This setup if you turn down your sensitivity to somewhere between 18-20 should eliminate a lot of iron falsing. This set up is good for any type of hunting really except beach.
Hey, so I’m pretty sure I watched one of your videos probably more than once lol you’re an amazing teacher for this. I started with the legend and now I have the. manticore. My significant other has the equinox 900 and honestly he’s always finding more than me. That’s why I bought the manticore. Ha. I have found that sometimes even though I can get somewhat of a repeatable beep sometimes it’s very scratchy if that makes sense and I get so frustrated. I was wondering if you wouldn’t mind giving me some of your professional settings what I should do for my main, I live in Minnesota And hunting both , lotta deep stuff here as well. I was just using AT general 4 recovery speed. Stabilizer on the preset Ferris limit and I’m still missing stuff. He’ll go over a spot that I didn’t even hear the beep for something. I’m hoping you can help this as my main settings. 🙏 I find lots of clad by the way, and some relics. I’m not new to metal detecting just this manticore.
Thanks for the vote of confidence I appreciate that. For starters, I do like these ferrous limits I reference in the video but I tend to run the machine more now in all metal mode. If you are running in all metal mode, make sure you turn on the Red Ferrous numbers (only matters if you are running all metal mode). If you are in heavy iron we like to hunt with the stabilizer at 2 or 3 (no higher) and we turn on the Iron filter. If you don't have those conditions turn off the filter. You can still run a stabilizer but if you don't need it, turn it off. If you want some more depth, lower your recovery speed down to 2 or 3. As far as sensitivity goes, don't run it too high. We hunt with it at around 20-22. When over a target, turn 90 degrees on it. If the numbers significant change or go away it probably junk, if you turn and you still hear a repeatable target pay attention to the 2D map. You might see a co-mingled target with iron. The manticore overall is a deeper machine than the 900 but it takes some time to understand what its tell you. I've had many members in my Patreon group almost give up on it, but now the majority of them won't put it down. Hope that helps.
@@MentalMetal awesome thank you! I think what confused me too was the ferrous number changes in a couple videos. I think a couple even had a negative number. There’s where I got lost lol.
do you have any videos with you hunting with the custom setting that you just showed us?
Scott, are there any manufactures out there making a lighter shaft than the stock shaft for the manticore TIA
I'm not aware but Steve's Detector Rods maybe coming up w/something ;-) I would reach out to him and ask.
I used these settings (not that I understand them, lol) and did a quick hunt after work. New park for me.
First target was a 1932 silver quarter. Dug some junk. Then, I found an 1887 IHP just as I got rained out.
IHP was my first. Saw it laying on the ground after kicking leaves away. Going back to this spot in the morning. Stretch of creek that had several mills along it.
Will be running these settings!
Excellent good luck!
Good Stuff... Happy Hunting Peace
Thanks!
Do u think the manticore is better then the CTX3030. They both have up and downs but what’s your opinion? I have the Excalibur II, CTX3030 and the manticore.
So I’m a tad bit confused Scott will it automatically save after you put it in and shut the machine off and turn it back on or is there a way to save it? I didn’t catch that of the video.
Yes when set this up in one of the additional banks/slots (I think you have 4) it will remember until you overwrite it.
Scott, good video, however… 100% beach hunter here, I’ve seen so many videos advising against notching, or adjusting Ferrous limits for fear of missing gold targets. I understand that gold is nonferrous, so that doesn’t seem to make sense to me anyway. What are your thoughts on this?
I hear ya, I use the manticore and have since it was first shipped. I will not notch anything out and yes I dig nails sometimes but I also dig great stuff that sound like iron including small gold. It’s rare but it does happen. Dug 6 gold in one night recently and most sounded like iron with a slight low bump so keep it wide open 👍🏼
If I'm on the beach I would run it in all metal mode. I wouldn't run it this way on the beach.
@@MentalMetal that’s what I’m doing all metal mode on the beach, thanks
Ur a good teacher
Should I expect to able to run m8 coil at higher sensitivity than the m11 with this custom program?
You should actually run a lower sensitivity down to about 16-18. You can run the 11 a little higher to about 20-22.
@MentalMetal My m8 coil will be quite at a sensitivity of 30 where with the m11 I max out around 25. I'm wondering if there is a problem with the coil.
Thats Sids ferrous limit set up. you should try his full set up you wont go back,