GRRREAT! vid man! Love the sound of them pipes hooked up to that C5👍 Mines an unmolested ‘04 24hr LeMans Blue Commemorative. Maybe this winter tho that’ll all change 😬
Not a Corsa or Borla or (ugh) Flowmaster sounds just right on a Corvette. First video I saw that made me was a z06 was Z 0 Sick vs a termi mustang and I haven't heard a better sounding exhaust online or in person. Kudos man.
Adrian Wesker Those are the "halo" taillights from radioflyer innovations, and you can find the exhaust on eBay (pay attention to the part number cause they come in dual and quad tips)
Adrian Wesker m.ebay.com/itm/B-B-Exhaust-FCOR-0100-C5-BULLET-QUAL-RND-97-04-/162066579800?hash=item25bbebc158%3Ag%3ARbYAAOSwHJhXMi-o&_trkparms=pageci%253A9f8faa03-489c-11e7-b9f2-74dbd180f864%257Cparentrq%253A6fae632a15c0ab1db5fba2bdfffabd7a%257Ciid%253A1
Timinator004 x thank you so much, I just ordered it. i have a 2014 camaro ss and it pops and crackles at deceleration everytime. I hope this exhaust would do same to but louder.
If you were running a big cam through Kooks 1 7/8 LTs with an off-road x-pipe through your Billy Boats it would. The key to get that note is a big cam a good set of LTs and catless x-pipe before the axle back. I ran a similar setup with 232/236/113+ through Kooks 1 7/8s and Kooks off-road x-pipe through Billy Boats and it sounded the same. Running Borla single tip Stingers through the same setup with FI now and the car sounds more like a liter bike at WOT now.
I got long tubes and no cats in it now. But I got a Texas speed set up with 5.3 stage 2.5 ported heads and a 228/232 112 lsa set up going in. I hope it sounds as good as yours.
@@skudda1 that's a nice setup you have going in. I ran a 228/228/112 for a while through stage 2 West Coast Cylinder Heads 241s and car made 398rwhp/390rwtq with BBK shorties. Do you have 1 7/8 or 1 3/4 LTs? My buddy was running a similar setup to mine 232/236/113+ with same heads, (he had 1 3/4 LTs) when both cars were NA making 428 rwhp vs 418rwhp and my car with 1 7/8 Kooks had a higher pitch at WOT than his did. Both sounded good though.
Antz I've been in the vette game probably longer than you've been driving. Instead of posting an arrogant remark on a car you know nothing about, how about hopping off that white horse of yours and asking what's in the car.
Love the car, but you gotta be mental driving like that without an airbag. Crashes at that speed you're dead in a blink of an eye. Gotta be smarter then that...
That blue is spectacular!
Thanks man!
I love that high pitch scream I want that so bad on my 02 c5 but man there expensive I’m only 19 that’s why lol just gotta keep working
Awsome..I've had a 97 and 2000.never alterd my exhaust...untill now.lol
Cammed LS3 to Kooks 1 7/8 to no cats to B&B mid pipe to B&B Bullets.
GRRREAT! vid man! Love the sound of them pipes hooked up to that C5👍 Mines an unmolested ‘04 24hr LeMans Blue Commemorative. Maybe this winter tho that’ll all change 😬
Omg thank you, best c5 exhaust video on youtube.
You're welcome!!
I love the exhaust. I'm looking to buy bullets sometime this coming month!
Nice dude!
I'm buying a c5 next week and your exhaust is exactly what I want. Great job it sounds like a beast.
Thank you very much! What plans do you have for your C5?
Exhaust, lsx intake and ls6 heads to start but anything can happen after that.
DeAndre Ramsey cam cam cam cam
This exhaust sounds awesome and a very cool video!! Subed!!
Thank you! More to come!
Not a Corsa or Borla or (ugh) Flowmaster sounds just right on a Corvette. First video I saw that made me was a z06 was Z 0 Sick vs a termi mustang and I haven't heard a better sounding exhaust online or in person. Kudos man.
Thank you sir!
And now, less than a month later I own my own 2001 C5 Z06. I'll post a vid when I get a cam in it or some such lol.
Congratulations on 1000
damn, now I want one lol
sounds and looks amazing!
Thank you very much!
Thats how you demo an exhaust man!
Thanks man!
Sounds good bruh... love the stance of that
delibrain916 thanks man!!
I hope you get credit every time I watch this vid.
Kurt Jones Comments like these mean a lot. I don’t know but keep watching haha. Thanks for the support.
Mans has some fucking hands. How a vette's supposed to be driven.
I have a c7 I was told the Billy boat bullet or any exhaust isn't as good as the stock exhaust for the c7 any ideas
how much hp did this make around 470+whp?
Nice Vette!
What type of wheels are these?
Thank you. They are CCW 505As,
I think this is the nastiest C5 I have seen in my life
Thanks man, I appreciate it!
@@MrLSX i got a bunch of videos on my different bikes if youre into bikes too. Fast ones, slow ones, whatever. Bikes = cheapest speed possible
@@tylerfabish5578 not really into bikes that much but I’ll swing by your page and check a few of those videos out.
@@MrLSX i used to be the same way til i rode one. And then realized a 3000 dollar 600 will beat $100k cars. Still love cars and bikes though!!
And you got bars lol
I like the sound! What steering wheel and adapter do you have?
Pist Piston thanks man! It's the GM NRG setup with a Sparco 383 suede.
Does it have stock headers/cats??
Description updated.
Any noticeable power gains
From the cat back, no. From everything else, yes lol.
what is the exact exhaust set up here? what mid pipe, cammed?
Cammed LS3 to Kooks 1 7/8 to no cats to B&B mid pipe to B&B Bullets.
vettelover1990 x pipe im assuming? everything basically from billy boat besides headers?
Cammed LS3 to Kooks 1 7/8 to no cats to B&B mid pipe to B&B Bullets.
Thats correct.
@@MrLSX thanks for video ! what kind of cam?
Is that with headers also? Or just cat back?
Full exhaust my guy. No cats because I’m a dog person.
@@MrLSX not many will understand this haha
@@TwstedTproductions 🤣👌 But cheers to those who do!
What is your entire setup ? Xpipe, catless, headers ?????
Cammed LS3 to Kooks 1 7/8 to no cats to B&B mid pipe to B&B Bullets.
where did you getthe tail lights and the exhaust? pls send me the links thanks.
Adrian Wesker Those are the "halo" taillights from radioflyer innovations, and you can find the exhaust on eBay (pay attention to the part number cause they come in dual and quad tips)
Timinator004 x i dont see them on ebay. I look twice and found nothing. :(
Adrian Wesker m.ebay.com/itm/B-B-Exhaust-FCOR-0100-C5-BULLET-QUAL-RND-97-04-/162066579800?hash=item25bbebc158%3Ag%3ARbYAAOSwHJhXMi-o&_trkparms=pageci%253A9f8faa03-489c-11e7-b9f2-74dbd180f864%257Cparentrq%253A6fae632a15c0ab1db5fba2bdfffabd7a%257Ciid%253A1
Timinator004 x thank you so much, I just ordered it. i have a 2014 camaro ss and it pops and crackles at deceleration everytime. I hope this exhaust would do same to but louder.
Adrian Wesker Wait, the link I sent you was for a C5 Vette though, you have a C5 as well right?
Lowering springs?
Hand Solo Lol, no man. The Corvette used leaf springs. Do I got rid of those and installed coilovers.
Wheel specs?
does it drone inside ?
krezo yes it’s a race car haha
Orlando location?
panzer waffen Jupiter actually
vettelover1990 nice...quiet place and beautiful
vettelover1990 greetings from miami
I was the 1000 th subscriber
I got billy boats on my C5. It doesn’t sound as good as this.
skudda1 I get that a lot. Keep in mind this is an LS3 too.
If you were running a big cam through Kooks 1 7/8 LTs with an off-road x-pipe through your Billy Boats it would.
The key to get that note is a big cam a good set of LTs and catless x-pipe before the axle back.
I ran a similar setup with 232/236/113+ through Kooks 1 7/8s and Kooks off-road x-pipe through Billy Boats and it sounded the same.
Running Borla single tip Stingers through the same setup with FI now and the car sounds more like a liter bike at WOT now.
I got long tubes and no cats in it now. But I got a Texas speed set up with 5.3 stage 2.5 ported heads and a 228/232 112 lsa set up going in. I hope it sounds as good as yours.
@@skudda1 that's a nice setup you have going in. I ran a 228/228/112 for a while through stage 2 West Coast Cylinder Heads 241s and car made 398rwhp/390rwtq with BBK shorties.
Do you have 1 7/8 or 1 3/4 LTs? My buddy was running a similar setup to mine 232/236/113+ with same heads, (he had 1 3/4 LTs) when both cars were NA making 428 rwhp vs 418rwhp and my car with 1 7/8 Kooks had a higher pitch at WOT than his did.
Both sounded good though.
1 7/8 long tubes with an x pipe. Also bought a 3:90 gear to go in also.
Why would you put Z06 DNA on the plate when its clearly not a z06...kinda gay/
Antz I've been in the vette game probably longer than you've been driving. Instead of posting an arrogant remark on a car you know nothing about, how about hopping off that white horse of yours and asking what's in the car.
I dig the handle...I had ATI-PSI on my 98 D1 Camaro.
Love the car, but you gotta be mental driving like that without an airbag. Crashes at that speed you're dead in a blink of an eye. Gotta be smarter then that...
The car originally came with only 2 airbags and styrofoam in the doors. I have a bucket seat and a 6 point harness. If anything, I'm safer now.
Good to hear! I still got my grandpas 03 Z06 and it pulls hard! Gotta love the C5's
Sounds constipated.
That thang sounds like a screaming Dinosaur
Thanks! She definitely needs a lot of dead dinosaurs to keep her running 😂
@Mr. LSX , Bro I have the same system on my 02 C5... came on the car....love it at 5k rpm......