Autocad 3d house design - Part 2- 2D plan to 3D conversion (2019)
Вставка
- Опубліковано 20 сер 2024
- This tutorial is all about creating a complete 3D house in AutoCAD in easiest of steps. This video in particular is all about converting the 2D plan into 3D.
To subscribe:
/ @caddmaniac
#autocad #civilengineering #caddmaniac #engineering #civilengineer #building #engineer #architecture #civilengineer #design #civilconstruction #civilengineers #3Dhome
................................................................................................................
Leaf by KV / kvmusicprod Creative Commons - Attribution 4.0 International - CC BY 4.0 www.creativecommons.org/licenses/by/4.0/ Music promoted by Audio Library • Leaf - KV (No Copyrigh...
Glad that I found your channel...You actually reply to all the doubts and not just make the video and leave people unanswered. Great job !
Thanks for such kind words 😊
You are welcome 🙂
Sir, I am from Nepal, I watch your channel for few weeks but totally able to create 3d models. thank u sir thank u so much.
You're welcome 😊
For more technical tutorials install CADD MANIAC app from google play store
@@CADDMANIAC Ok sir
Best channel for a beginner to advance. Thanks so much for your time and dedication. I hope to learn more from you.
Thanks
@@CADDMANIAC @ 0:36 did you say overkill to clear the duplicate line? Your swift response will be highly appreciated
Yes
you are expert amazing good thanks for uploading the video
You're welcome 😊
Nice desgin bro
Thanks brother
for submission sheet tutorial, install CADD MANIAC app from google play store; edushield.page.link/QVgK
Brilliant
Thanks
impresionante
So good
I m facing problem in extrude, I'm not able to make solid face. please help me sir.
Make sure you draw the plan in xy plane, also make sure the ucs is set to world or top, then try to join and extrude, or otherwise join and try to use presspull command
Thank you sir.
sir, again i am facing difficulty in slicing, array is not selected one by one.
done sir
@@anupdaimary9294 nice
About the press and pull part sir. I would like to ask what did you do to the second when you said CUT i don't understand
Plz mention the time in the video
Which recorder u r using? Screen recording?
Icecream screen recorder
your work is good but very speedy and short term beginner cannot understand don not use short method thanks
Ok I'll go a bit slow in my next videos
Please make a vedio on visual style manager because me realistic or conseptual is not like you
My extrude tool is not working in autocad 2016!!!
Make sure the object you have drawn is in a single plane
what did u do in 3:28 I didnt get it
I have presspull cut the inner portion, take presspull command, click inside the inner rectangle, move the cursor downwards to make the cut-out
@@CADDMANIAC sir how to do cut-out
Cut out?
Type presspull, press enter, click inside the boundary as shown, then push it through the wall to make the cutout
Sir how can i download your 2d plan ??
Good luck sir
But sir I was not able to to draw a polyline at 3:00 I don't know how to fix the setting???
Just it is working one polyline for one wall and if I want to connect the 3rd point so I can not
Plz help me sir
drive.google.com/file/d/1lCTAGOcabJb3CTa5HdMOSr4pVvvCBUF5/view?usp=drivesdk
Sir this is the thing which happen to me...
Make sure the ucs is set to "top" or "world" before drawing the polyline, and the dynamic ucs should be off, shortcut is f6
Sir extrude comment not to use of my drawing , so please can you tell how to use extrude comment
Watch the video carefully, you will definitely understand
Sir.. I can't make 3 points Arc for living room .. 1 st point of Arc is ok . And second point is automatically going to Mid point of Living Room Wall. So there was a problem sir. Plz help me.
Did you turn the dynamic UCS on? If not, then press f6 to turn it on and try again
Thank you sir 😍
@@paingpyaethu9173 you're welcome
for submission sheet tutorial, install CADD MANIAC app from google play store; edushield.page.link/QVgK
PRESSPUL ISNT WORKING WHAT CAN I DO
Use boundary command, click on pick point, click inside the inner line and outer line of the walls, press enter, a polyline will be formed if there is no gap, then try presspull or extrude, it will work
in 5:00 when i choose the object, it select all of them
please help
When creating the array, make sure you turn the associative option off
@@CADDMANIAC thank you very much
@@elzababazade2132 you're welcome 😊
@@CADDMANIAC
I think you mean associative hatch, but still it select all
@@elzababazade2132 no I mean, while creating the array; in the ribbon, if you see the associative option is highlighted in blue color, just left click to turn it off
Sir slice kete waqt sb select ho rhe hai kaise kre usse aur arc bhi 2d mein bn rhi hai 3d mein nhi
Time mention karo, samajh me nahi aaya
@@CADDMANIAC 4:58 pe sb box select ho ja rhe h
@@CADDMANIAC aur 2: 30 pe arc draw kr rhe hai toh horizontally ho rahi h jbki mera UC's bhi on h
Can you provide link for the dwg file?
Link is provided in the first tutorial of this series, plz check the playlist
I HAVE NOT PATH ARRAY WHAT CAN I DO PLZ TELL ME I AM USING AUTOCAD 2010
Then just copy
they will take time
@@khanmuhammad6108 try to upgrade to the latest versions
@@CADDMANIAC BUT MY LAPTOP NOT AFFORD TO PLAY THEM
It's ok then
you really fast and specially with dimentions and I wish if you mention what are the measures of the lines instead of following you it is really confusing
Thanks for your suggestions
2d drawing send me bro
I dont have the file with me anymore, it was way back in 2018