If interested in learning 𝗔𝘂𝘁𝗼𝗖𝗔𝗗 𝗦𝘂𝗯𝗺𝗶𝘀𝘀𝗶𝗼𝗻 𝗦𝗵𝗲𝗲𝘁 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 course, Install 𝗖𝗔𝗗𝗗 𝗠𝗮𝗻𝗶𝗮𝗰 app from Google Play Store. • 𝗗𝗲𝗺𝗼 𝘃𝗶𝗱𝗲𝗼𝘀 available • 𝟮 𝗠𝘂𝗻𝗶𝗰𝗶𝗽𝗮𝗹𝗶𝘁𝘆 approved 𝗗𝗪𝗚 𝗳𝗶𝗹𝗲𝘀 will be provided • 𝗔𝗽𝗽 𝗟𝗶𝗻𝗸- edushield.page.link/QVgK • 𝗪𝗲𝗯 𝗟𝗶𝗻𝗸- pyucm.courses.store
Well done sir! Great job, just what I needed. You explain also everything, something not everyone does that. Also a question: seems I can’t find part 1 of this video series. Any link? Keep up the good job of yours!! Thanks in advance!🎈🎈
AutoCAD 3D- House Design (2019): ua-cam.com/play/PLckueuGWNoTtR81BsasCOKg7a4TeSLhjZ.html Go to the channel page and check the playlist, I hope you will get everything you want
You have to select the wall first then right click to get the "isolate" option; or otherwise select the polyline by using blue window selection; still if you face any issues then send snapshot or short clip to the WhatsApp number provided in the about section of the channel
Hi it's me again from the previous video. Quick question; my rectangles aren't working properly, like it would not snap and sometimes it won't rotate or i dont know what to call it but it just won't come out like yours. :(
No replacement of join command, if you know boundary function, use that n try; properly join and then extrude to make a solid object; you might be extruding to surface, that's why it's showing too many lines
Sir while i am practicing in the 3d modelining buliding,at starting video U said join, after over kill and i was also a draw the polylines only but extruding time the buildings was coming "on the top view full completed not it was in gap in the walls
@@CADDMANIAC i draw the plan with polylines ,after extruding 9'6" It was came but ,in the walls are there know the walls are gap is coming in above the vedio the while extruding the walls are came with rectangle with finish,i hope u understand
Make sure the lines doesn't overlap at the corners, neither there should be any gap at the corners, then join and try again, if it doesn't work then try presspull command to extrude the walls, make sure you click in between the lines not on the lines while presspulling
Then you have not extruded it properly, you have extruded it into surface, try again, convert the lines into polylines first by using join command then extrude it properly to make it solid not surface
Make sure the dynamic ucs is turned off, function key f6 is the shorcut, and also make sure the ucs is set to 'world' or 'top' and object snap must be turned on as well (shorcut key- f3).
@@CADDMANIAC what is the name of the part where we draw the complete ground floor which includes adding furnitures ? I guess it proceeds this video. i need to see it please to continue the series
I have followed all tour video and rally enjoyed it. You really know to explain. On my side i would like to ask you if you can talk a bit slowly. Thank you
This is undoubtedly one of the best tutorials in you tube about autocad
Thank you so much
If interested in learning 𝗔𝘂𝘁𝗼𝗖𝗔𝗗 𝗦𝘂𝗯𝗺𝗶𝘀𝘀𝗶𝗼𝗻 𝗦𝗵𝗲𝗲𝘁 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 course, Install 𝗖𝗔𝗗𝗗 𝗠𝗮𝗻𝗶𝗮𝗰 app from Google Play Store.
• 𝗗𝗲𝗺𝗼 𝘃𝗶𝗱𝗲𝗼𝘀 available
• 𝟮 𝗠𝘂𝗻𝗶𝗰𝗶𝗽𝗮𝗹𝗶𝘁𝘆 approved 𝗗𝗪𝗚 𝗳𝗶𝗹𝗲𝘀 will be provided
• 𝗔𝗽𝗽 𝗟𝗶𝗻𝗸- edushield.page.link/QVgK
• 𝗪𝗲𝗯 𝗟𝗶𝗻𝗸- pyucm.courses.store
Bro I just finished my project in minutes because of you thanks man
You're welcome
hey can you help me to make my 2d house plan into 3d plan
Thank you sir ...had a doubt where to start 3d drawing of a plan and this video is perfect❤
You're welcome
thank you so much for this wonderful tutorials
You are welcome!
Well done sir! Great job, just what I needed. You explain also everything, something not everyone does that. Also a question: seems I can’t find part 1 of this video series. Any link? Keep up the good job of yours!! Thanks in advance!🎈🎈
AutoCAD 3D- House Design (2019): ua-cam.com/play/PLckueuGWNoTtR81BsasCOKg7a4TeSLhjZ.html
Go to the channel page and check the playlist, I hope you will get everything you want
Superb, your better then my teacher 👍
Thanks
One word from my depth of heart ❤️
😘 love you
Thank you so much
Thanks for your tutorial course
You are welcome
While drawing a rectangle for window cutout osnsp not picking end point of window. Only picking for first window
Sorry for replying late
I hope your problem is solved
THANK U A LOT.I HV LEARNT MANY THINGS FROM YOUR TUTORIAL
You're welcome
@@CADDMANIAC sir my window cutout is not showing.Its showing like a wall.what to do?
@@itsanewday5219 use presspull command to presspull cut the window cutout then
thanks
Awesome teaching Sir Ji
Thanks
How do we house drawings from own measurements? thanks
You have to learn planning and of course with practice you will get better
When i make it conceptual it forms a entire block, its not forming only walls, what to do, i followed your every step
First change the visual style to conceptual, then select the walls and try to extrude or presspull; WhatsApp me if it doesn't get rectified
which software are you use autocad 3d ?
Yes
How to do the roofing in 3D plz. Thanks a lot for your lectures.
Check playlists
There are lots of playlists on civil engineering and architecture
Why I'm not able to join my lines...where all my joints are touch properly..please help
Send dwg file
Hi please my drawing refuse to pull up I don't know way ,please what can I do
Send me the .dwg file I'll see what's the problem
Thank you ❤️🌟
You are welcome
Sir bcoz of ur video we now know how can go to 3d mode , but how we can go to 2d interface from 3d interface
If you mean how to extract 2d drawing from 3d model, then I'll soon be making video on that, stay connected
Sir autocad 2023 license checkout timed out problem arrival now what is solution
Reinstall after installing all previous autodesk products
@@CADDMANIAC sir iss par ek detail video tayar kijiye please🙏🙏
Sir if I use extrude commandif I drag for 3 feet downward it goes in upward
Then use minus sign before 3' i.e. -3'
Nice sir
Thanks Rajat
@@CADDMANIAC thanks et ki a6e sir
Isolate option is not showing do there any way to select polyline
You have to select the wall first then right click to get the "isolate" option; or otherwise select the polyline by using blue window selection; still if you face any issues then send snapshot or short clip to the WhatsApp number provided in the about section of the channel
Hi it's me again from the previous video. Quick question; my rectangles aren't working properly, like it would not snap and sometimes it won't rotate or i dont know what to call it but it just won't come out like yours. :(
Make a video and whatsapp it
nvm I got it awesome vid!
Thanks
Well taught but please can you elaborate on how to change the workspace to 3D modelling in autocad 2021?
There is a settings kind of symbol in the lower right corner of the screen (status bar), click on that and change the workspace
Best understanding searching sir thanks
You're welcome
Really very helpful
Thanks
While using the extrude command I am getting lines ,how can it get avoid sir,and one more doubt join the lines is not getting through the join command
No replacement of join command, if you know boundary function, use that n try;
properly join and then extrude to make a solid object; you might be extruding to surface, that's why it's showing too many lines
Thank you so much sir I can done it..
You're welcome
Bt sir I have a doubts civil engineer's 3d autocad design need ?
@@rahuldey6248 edushield.page.link/QVgK
Install this app, this has best civil engineering courses
Sir while i am practicing in the 3d modelining buliding,at starting video
U said join, after over kill and i was also a draw the polylines only but extruding time the buildings was coming "on the top view full completed not it was in gap in the walls
Sorry I didn't get you
Join my FB page and ask me there, link given below:
facebook.com/caddshelter
@@CADDMANIAC i draw the plan with polylines ,after extruding 9'6" It was came but ,in the walls are there know the walls are gap is coming in above the vedio the while extruding the walls are came with rectangle with finish,i hope u understand
Make sure the lines doesn't overlap at the corners, neither there should be any gap at the corners, then join and try again, if it doesn't work then try presspull command to extrude the walls, make sure you click in between the lines not on the lines while presspulling
Oh my gosh thank you so much
You're welcome
how did you extrude that im unable to do that 😢
Pls recheck, you will be able to do it for sure
sir I have a prolem in wireframe it shows lots of lines/wires in wireframe instead of single lines like yours please help
Then you have not extruded it properly, you have extruded it into surface, try again, convert the lines into polylines first by using join command then extrude it properly to make it solid not surface
@@CADDMANIAC ok thanks sir solved..
Sir I can't justify the correct position of door and window by rectangle tool in 3d i.e.end to end point connection
How can I rectify???
Mention the "time" in the video where you are facing difficulty
Sir 1:03 to 1:36
Make sure the dynamic ucs is turned off, function key f6 is the shorcut, and also make sure the ucs is set to 'world' or 'top' and object snap must be turned on as well (shorcut key- f3).
Sir make a video for mechanical engineering also .
Check the mechanical modelling playlist
m.ua-cam.com/play/PLckueuGWNoTslCNzzheoNJpuJIRpbvVoU.html
Sir, Please Can I send you my ground floor drawing and if you can convert it into 3D..?
I hope you will be able do it yourself after watching the complete series
@@CADDMANIAC what is the name of the part where we draw the complete ground floor which includes adding furnitures ? I guess it proceeds this video. i need to see it please to continue the series
Where's the link to the floor plan?
drive.google.com/open?id=1V8NLvBc-XuwZYozwKbnyG3eO6pAAlFX7
When I click on Join, it says 0 objects joined, ## discarded. I have checked every possible lines that are not crossing. Can you help on this?
Send me the file
Full help full
Sir, some window got subtracted from wall
And some din it's just showing outcut mark of window
Use presspull command for creating the remaining window cutouts
while drawing a rectangle for door cutouts, it gets created on random plane .what to do?
I think your dynamic ucs is on, if so, then press f6 to turn it off & make sure the ucs is set to 'top' or 'world'
Sir plz i also need a plan... In 2d and 3d also
Sir please send the link of part-2 2d
This is the 2nd part only
There are total 14 videos in this series, go to channel home page, click on playlist and access the playlist you want
hello can you put the dwg file of this floor plan please
drive.google.com/open?id=1V8NLvBc-XuwZYozwKbnyG3eO6pAAlFX7
I’d love to take your assistance to convert my 2D floor plan to 3D floor plan. Is there a way I could contact you to discuss details and pricing?
caddmaniac18@gmail.com
Well deserve!!! 💞💞
Thanks
I am not able to hide the plan to select polyline
Select the model by left clicking on it, then right click, go to isolate and then click on hide object
Thanks a lot.
You're welcome
How to join please help me
Thanks
You're welcome 😊
Thank you sir.
You're welcome 😊
Where is the first video, the part 1
ua-cam.com/video/wKc8pKtfYn4/v-deo.html
watch last part first, it was updated version of the first part
nice
Thanks Sourav
Sir ap mujhe is map ki 2d 3d banana sikhade
kaunsa map?
Sir ap WhatsApp pe ajaen
Ya sir ap mujhe ap apna whatsapp number send kare
thank you
You're welcome 😊
In Ctrl +@ button not showing home planning folder
Sorry for replying late
I hope your problem is solved as of now
Is there a template of this?
drive.google.com/open?id=1V8NLvBc-XuwZYozwKbnyG3eO6pAAlFX7
I have followed all tour video and rally enjoyed it. You really know to explain. On my side i would like to ask you if you can talk a bit slowly. Thank you
Yes of course
Check the videos uploaded lately, I have spoken slowly
Sorry to say bro, you're too fast . I am a beginner and didn't understand you. make this video for beginner
Sorry for that but check the other playlists, I hope that will be helpful for you
I need ur help sir plz....
What help?
Take my heart
Thank you so much
Whoa
Bhai mazak nahi chahiye tha mujhe sach me bani banai file 3d me convert krni thi ye to ham kr hi lenge problem ka solution batao agar aapke pas ho to
Ye koi mazak nahi hai, ye AutoCAD ka 2d to 3d tutorial hai, aur tum kya kehna chahte ho wo samajh me nahi aaya
Please
Bhai to sikha raha ya apni tejai dikha raha hai
latest videos dekh le
Hindi ma batav sir kuch samaj nahi aya
hindi me bhi videos banaya hai, plz check kar lo playlist me jake
class le raha hai kya aaram se nahi bta skte sirf pese kmane hai videos dal ke
Ha bahut kama liye Bhai, itna ki youtube ko hi kharid le, naye videos dekhlo, wo slow hai, ye suruaat k videos hai
You don't know hindi request explain in hindi
There are a few Hindi videos as well, plz check playlist
Ur method is really not good ur just running as dog chasing
It was created wayback in 2018, watch the latest series, there are many current playlists