Wow thank you very much buddy for your kind words 🙌🏽 🥰 It's much appreciated and you're very welcome 😉 👍🏽 Hopefully in the next weeks the whole build is finished with brushless and maybe fpv setup 👌🏽😉 Have a nice weekend and stay safe ✌️🏽 😊
Hey my Friend you're very welcome and thank you so much for your kind words 🙌🏽 😍 it's much appreciated... Wow Malaysia Assalamu aleikum wr wb 🙏🏽 Love back from Germany
Hey mate thank You so much sie very welcome 😉 🙌🏽 Sorry I couldn't reply to your second comment,but here's the video with how to make the front bumper 👌🏽😁 Ⓜ️ Wltoys 124019 Metal Upgrade Part 1 ua-cam.com/video/YhJB9asGzD4/v-deo.html Stay safe ✌️🏽 😊
Hey mate THX again 😁🤜🏽🤛🏻 No its still brushed to many stuff laying around,but I'll upgrade it in the next weeks for Brushless and going to have some speed tests for sure 💥🔥😱🤩
Hi i meant to ask you the side skirts, I bought the exact same ones, how did you get the side skirts to be flush and not near the floor, as my wheels are higher than the side skirts.
Did you make the first part of the the front bumper or buy it? If so what’s it’s called and where did you get it? Also do you know of any companies making front wings for the 019 ?
Hey my friend on stock ESC I'll use parallel plug to fan on 2s . When 3s use a down converter . Hope that helps you can check my video for how to make the plug ua-cam.com/video/kRUQ1FzIdCE/v-deo.html Converter DC-DC UBEC 3A 5V / 12V BEC banggood.app.link/Sk87fad7S5?p=5Y130935228052016013 JST Male & Female Plug Cable banggood.app.link/aIiwikYbT5?p=5Y130935228052016013 Lipo Balancer Plug Cable to JST banggood.app.link/k6uhfQ16S5?p=5Y130935228052016013
Ok USA bro Iam in Germany that would be to expensive to send it from here to you for that little piece of plastic 😱... It's really easy bro get you two of this plastic parts if you're afraid to damage one 😁🤜🏽🤛🏻
This one here has a servo plug so when upgrading to Brushless system you'll plug it into the receiver Otherwise you can power it buy an extra small lipo / battery or with an balancer plug this one here ban.ggood.vip/10WNT And if you use an 3s lipo you should better use an volt down converter so that you don't have to much Volt this one here ban.ggood.vip/10WNM Hope that helps have a nice weekend 😊 👍🏽
Full set any colour banggood.onelink.me/zMT7/5d3ebd72?p=5Y130935228052016013 Arms front banggood.onelink.me/zMT7/93853a9?p=5Y130935228052016013 Rear pink Nr:7 banggood.onelink.me/zMT7/167c37ac?p=5Y130935228052016013 Full set super cheap banggood.onelink.me/zMT7/872bfb29?p=5Y130935228052016013 Rear wing bracket banggood.onelink.me/zMT7/cb9769a3?p=5Y130935228052016013 Is that what you looking for?
Previous videos are metal upgrade with front bumper build part 1-2 than this here is part 1 from the high speed build and part 2 is coming up with brushless setup and after this my plan is going to make it more or less long range fpv 😉👍🏽
Thanks buddy 😍 🙌🏽 Yes and really cheap and simple thats allways my goal so that everyone can do it 😉 Ok cool than stay tuned for the new video and stay safe ✌️🏽 😊
Hey Bro thank you very much ☺️ 🙏🏽 Parts are from aliexpress and it's self-made no big deal check my video how to do and the parts are in the video Description 😉 👍🏽 ua-cam.com/video/YhJB9asGzD4/v-deo.html
Hey my Friend you're very welcome 😉 🙌🏽 and thank you very much ☺️ 🙏🏽 Yes for sure here are the two videos Ⓜ️ Wltoys 124019 Metal Upgrade Part 1 ua-cam.com/video/YhJB9asGzD4/v-deo.html Ⓜ️ Wltoys 124019 Metal Upgrade Part 2 ua-cam.com/video/357wMYdxl6M/v-deo.html Have a nice day ✌️🏽 😊
what esc ect are you putting in it to make it worlds fastest ..ive just put the 144/124 esc ect into a sg1603 but need to do a reverse solder job on the servo as sterring racks turn diffrent from each model
Hey my Friend Motor will be an 540 v3 with 4.5T and 7800kv the esc will be an 120A and both are sensored 😉👍🏽 Wow and what about servo and motor also in this small pinecone model 😳? Let me know if she finished Iam very interested 😉👍🏽
@@a-ztube wow she is going to be a beast lol ...my 124 got a 5.5t and 120amp to go in but sat on a shelf brand new all apart waiting lol ....so the sterring rack on the 144001 move diffrent to the pinecone 1603 so left is right and right is left so i have to take the servo apart and rewire the motor wires and 2 others on the pcb to make it turn the other way as the transmitter dont have the rerverse switch lol..
Ah bro that's just perfect need to talk over that need to do that upgrade also like you when it left my wltoys 124019 😂👍🏽 Have a nice weekend and stay safe bro ✌️🏽 😎 🏄🏽
Hey Bro thank you very much ☺️ 🙏🏽 To be honest it's not 💯% like I wanted to,but in the end Iam very happy too 😁👌🏽 Next time I think I let someone make it airbrush 💪🏾😃 Hope your well? Have a nice Day Dave 🤜🏽🤛🏻
Hey my Friend here's the car Wltoys 124019 one Battery banggood.app.link/tRDTmzunbdb?p=5Y130935228052016013 Wltoys 124019 Several Battery banggood.app.link/BewQcKqnbdb?p=5Y130935228052016013 It's about 100$ depends on how Batterys 😉 All the other Parts you need for this build are in the video Description in my 3 videos of this car. Hope that helps 😉 Have a nice weekend
Hey my Friend thank you very much ☺️ 🙏🏽 much appreciated 😍 🙌🏽 Yes that's the best tool except my dremel I ever had really 💯%👌🏽 Iam going now to get the stronger and newer version the mija 💪🏾😁 Have a nice day ✌️🏽 😎
@@leirameirarc yes the newer version and should be stronger 💪🏾😁 It's now in flash deal good price 😉👌🏽 XIAOMI Mijia banggood.app.link/AQR2JX2UOGB?5Y130935228052016013
Brother Omg 😲 😱 what a Amazing Job you have Done 😍😱 everything looks like it was meant to be 👍😁👍 Love the way you coloured the Wing in 😍 looks Amazing 👏 I like the fact you show us everything and put links in the Description for us all 😁 can't wait to see it Run bro 🤗🤗 really enjoyed every second Brother 😍you have a wonderful week ahead and Stay safe 🙏 😁🥰😎🥰👍🙏
Hey hey Mr BOOOM 💥 🔥 😍 🙌🏽 Thank you very much Big Brother for your kind words means a lot to me 🥰🙏🏽 Yes next step will be brushless Upgrade than on the street after that Iam planning to install some FPV 😜😃💪🏾... You too Brother and stay safe ✌️🏽 😎 🏄🏽
Bro you must read the title and description correctly it's part 1 from more videos so the build isn't finished and the world's fastest is in cling and with question mark 😉😁
It was already looking super cool 😎
Then you surprised me when you started hand painting the rear wing like that..
Absolute Wow Brother..
Hats off 👍😁👍
I wish someone sold parts similar to this 6:25 completely ready to install..looks great!
Sickest 124019 I’ve seen so far!
Hey mate thank you so much great to hear that 🥰🤜🏽🤛🏻
Have a nice day ✌️🏽 😎
This has to be the nicest 124019 on UA-cam wow I’m speechless
Wow thank you very much buddy for your kind words 🙌🏽 🥰
It's much appreciated and you're very welcome 😉 👍🏽
Hopefully in the next weeks the whole build is finished with brushless and maybe fpv setup 👌🏽😉
Have a nice weekend and stay safe ✌️🏽 😊
I love your design version. So Great ✅ Amazing
Love from Malaysian
Hey my Friend you're very welcome and thank you so much for your kind words 🙌🏽 😍 it's much appreciated...
Wow Malaysia Assalamu aleikum wr wb 🙏🏽
Love back from Germany
@@a-ztube waalaikummussalam Friend ✅
🤜🏽🤛🏻🌴
Nice work bro 👍🏽
Thank you very much bro 😍 🙌🏽
Nice vid that’s the smartest I seen yet
Thank you so much Bro really much appreciated 😍 🙌🏽
Great job! Congratulations! Still wainting to get my 124017 v2 from customs and you already gave some very good ideas! Thank you for the video.
Super cool bro
Thx bro 😍🤜🤛
Sick man 🔥
Thanks buddy 😉🤜🏽🤛🏻
@@a-ztube Is this rc fast already or u can upgrade?. Also np cool channel!
🙂👍
THX Bro it's much appreciated and you're very welcome 😍😃🙌🏽
It's on 3s lipo,but more is coming to this and also preparing it for (long range) FPV 👌🏽😉
That is so cool 😎
THX buddy 😍 🙌🏽
I like that that's badass good work
THX Bro 😍 🤜🏽🤛🏻 much appreciated
Normally I wanted to paint all black parts,but I think in the end it's good like this 💪🏾😁💯🏎
Stay safe ✌️🏽 😎
sooo beautiful💕👍
Hey mate thank You so much sie very welcome 😉 🙌🏽
Sorry I couldn't reply to your second comment,but here's the video with how to make the front bumper 👌🏽😁
Ⓜ️ Wltoys 124019 Metal Upgrade Part 1
ua-cam.com/video/YhJB9asGzD4/v-deo.html
Stay safe ✌️🏽 😊
@@a-ztube all good i found the front spoiler vidio thank you awesome job on that car. have you tested how fast? or am i still behind?
Hey mate THX again 😁🤜🏽🤛🏻
No its still brushed to many stuff laying around,but I'll upgrade it in the next weeks for Brushless and going to have some speed tests for sure 💥🔥😱🤩
GOAT 🐐
THX Bro 😉 👍🏽
Great video man
Thank you very much bro 😃🤜🏽🤛🏻
Hi i meant to ask you the side skirts, I bought the exact same ones, how did you get the side skirts to be flush and not near the floor, as my wheels are higher than the side skirts.
Hey buddy ,
Can you show me a pic from yours on Instagram or Facebook messenger 😉
Welcome brother please look in my video description or channel description there's the link 😉🤜🏽🤛🏽
such a sexy build
THX Bro 😉🤜🏽🤛🏻
Did you make the first part of the the front bumper or buy it? If so what’s it’s called and where did you get it?
Also do you know of any companies making front wings for the 019 ?
Hey my Friend yes 😉👍🏽
All the parts always in my Video Description 😉
Are there any videos of this thing in action with all the mods?????
Coming up now I must build another project with the parts so you can watch the parts to another very identical car soon my Friend 😊 👍🏽
What connector are you using to connect that cooler on the stock esc?
Hey my friend on stock ESC I'll use parallel plug to fan on 2s . When 3s use a down converter . Hope that helps you can check my video for how to make the plug
ua-cam.com/video/kRUQ1FzIdCE/v-deo.html
Converter DC-DC UBEC 3A 5V / 12V BEC banggood.app.link/Sk87fad7S5?p=5Y130935228052016013
JST Male & Female Plug Cable
banggood.app.link/aIiwikYbT5?p=5Y130935228052016013
Lipo Balancer Plug Cable to JST
banggood.app.link/k6uhfQ16S5?p=5Y130935228052016013
@@a-ztube thanks man , I will check your video , have a nice day ✌️
Same to you allways welcome 😉🤜🏽🤛🏽
Love your work!
Hey buddy thank you very much ☺️ ❤️ 🙏🏽
That's very nice to hear much appreciated...
Stay safe ✌️🏽 😎 🏄🏽
How much do you charge to cut and ship both plastic side wings pre drilled holes 124019 ????
Hey Bro were are you located?
@@a-ztube yo bro I'm located in Portsmouth , Ohio
Ok USA bro Iam in Germany that would be to expensive to send it from here to you for that little piece of plastic 😱...
It's really easy bro get you two of this plastic parts if you're afraid to damage one 😁🤜🏽🤛🏻
Can this goes on the 124017 to or just on this one
Sure it's the same car,but brushless stock 😉👍🏽
Excuse me, how did you change the shell pillar of your car🙏🙏
Hey my Friend 😊
I show it in the video 😁👍🏽 or what's your question exactly,?
Nice regards
whered you get that front splitter ?
Self made buddy watch all the vids from that build 😉🤜🤛
how do i get the fan to run on the heat sink is there something i need to buy
This one here has a servo plug so when upgrading to Brushless system you'll plug it into the receiver
Otherwise you can power it buy an extra small lipo / battery or with an balancer plug this one here
ban.ggood.vip/10WNT
And if you use an 3s lipo you should better use an volt down converter so that you don't have to much Volt this one here
ban.ggood.vip/10WNM
Hope that helps have a nice weekend 😊 👍🏽
🇮🇪. Cool upload excellent car 🚙
Hey my Friend,
Thank you very much ☺️ 🙏🏽
Much appreciated 😍 🙌🏽
Have a nice day ✌️🏽 😊
You make the best looking mods on a wltoys-car ever. Great job! And subbed ^_
Wow thank you very very much my Friend 🥰🙏🏽😃
You're very welcome 😉 👍🏽
Have a nice weekend and stay safe ✌️🏽 😎
Plz give item number on them arms on the front and back what are they control arms
Full set any colour
banggood.onelink.me/zMT7/5d3ebd72?p=5Y130935228052016013
Arms front
banggood.onelink.me/zMT7/93853a9?p=5Y130935228052016013
Rear pink Nr:7
banggood.onelink.me/zMT7/167c37ac?p=5Y130935228052016013
Full set super cheap
banggood.onelink.me/zMT7/872bfb29?p=5Y130935228052016013
Rear wing bracket
banggood.onelink.me/zMT7/cb9769a3?p=5Y130935228052016013
Is that what you looking for?
Got a link for that wing
Yes for sure allways in my Video Description 😉 👍🏽 maybe in the previous Video
That looks sick!! All you now need is a little more power
THX buddy 😉 🤜🏽🤛🏻
Yes power ist coming in part 3 for sure 💥
Have a nice weekend 😊 👍🏽
@@a-ztube is there a part 2??
Previous videos are metal upgrade with front bumper build part 1-2 than this here is part 1 from the high speed build and part 2 is coming up with brushless setup and after this my plan is going to make it more or less long range fpv 😉👍🏽
@@a-ztube oh now i get it. Well im exited to see how that turns out btw very cool idea with the side skirts they look awesome
Thanks buddy 😍 🙌🏽
Yes and really cheap and simple thats allways my goal so that everyone can do it 😉
Ok cool than stay tuned for the new video and stay safe ✌️🏽 😊
Hey bro that front bumper is sick where is it from
Hey Bro thank you very much ☺️ 🙏🏽
Parts are from aliexpress and it's self-made no big deal check my video how to do and the parts are in the video Description 😉 👍🏽
ua-cam.com/video/YhJB9asGzD4/v-deo.html
Hi great car!! Do you have a video of how to upgrade to all metal parts. Im new to this so i find your video very helpfull and informative.
Hey my Friend you're very welcome 😉 🙌🏽 and thank you very much ☺️ 🙏🏽
Yes for sure here are the two videos
Ⓜ️ Wltoys 124019 Metal Upgrade Part 1
ua-cam.com/video/YhJB9asGzD4/v-deo.html
Ⓜ️ Wltoys 124019 Metal Upgrade Part 2
ua-cam.com/video/357wMYdxl6M/v-deo.html
Have a nice day ✌️🏽 😊
what esc ect are you putting in it to make it worlds fastest ..ive just put the 144/124 esc ect into a sg1603 but need to do a reverse solder job on the servo as sterring racks turn diffrent from each model
Hey my Friend Motor will be an 540 v3 with 4.5T and 7800kv the esc will be an 120A and both are sensored 😉👍🏽
Wow and what about servo and motor also in this small pinecone model 😳?
Let me know if she finished Iam very interested 😉👍🏽
@@a-ztube wow she is going to be a beast lol ...my 124 got a 5.5t and 120amp to go in but sat on a shelf brand new all apart waiting lol ....so the sterring rack on the 144001 move diffrent to the pinecone 1603 so left is right and right is left so i have to take the servo apart and rewire the motor wires and 2 others on the pcb to make it turn the other way as the transmitter dont have the rerverse switch lol..
Ah bro that's just perfect need to talk over that need to do that upgrade also like you when it left my wltoys 124019 😂👍🏽
Have a nice weekend and stay safe bro ✌️🏽 😎 🏄🏽
Aondeo aerofolio dianteiro e pachoque nao encntrei a venda contact
Super duper nice work! Can't wait to see how it performs on road. 😎👌👌
THX buddy 😍 🙌🏽
Yes coming soon for sure 😉 👍🏽
Great job on the aero mods bro, looks sharp, great paint work on the wing to match the factory one 👌😁🍻💯
Hey Bro thank you very much ☺️ 🙏🏽
To be honest it's not 💯% like I wanted to,but in the end Iam very happy too 😁👌🏽
Next time I think I let someone make it airbrush 💪🏾😃
Hope your well?
Have a nice Day Dave 🤜🏽🤛🏻
Damn, great car
Thanks Buddy 😍💪🏾🤜🏽🤛🏻
How much is this car?
Hey my Friend here's the car
Wltoys 124019 one Battery
banggood.app.link/tRDTmzunbdb?p=5Y130935228052016013
Wltoys 124019 Several Battery
banggood.app.link/BewQcKqnbdb?p=5Y130935228052016013
It's about 100$ depends on how Batterys
😉
All the other Parts you need for this build are in the video Description in my 3 videos of this car.
Hope that helps 😉
Have a nice weekend
Such a cool upgrade, great paint job! And hey you use a WowStick as well! Good screwdriver 😁
Hey my Friend thank you very much ☺️ 🙏🏽 much appreciated 😍 🙌🏽
Yes that's the best tool except my dremel I ever had really 💯%👌🏽
Iam going now to get the stronger and newer version the mija 💪🏾😁
Have a nice day ✌️🏽 😎
@@a-ztube Do you have a link to purchase the new MiJa, is it the new Wowstick?
@@leirameirarc yes the newer version and should be stronger 💪🏾😁
It's now in flash deal good price 😉👌🏽
XIAOMI Mijia
banggood.app.link/AQR2JX2UOGB?5Y130935228052016013
Nice! Where's the 2nd video
THX Buddy Will come this year ....I had to many projects at the same time totally behind everything 🤣🙈🤷🏽
Stay safe mate 🤙🏼
@@a-ztubeawesome video wheres the update lol i wanna see if it holds down
@@Frenchii9YT coming hopefully in the next month first need to recover full from surgery and some urgent stuff before,but fingers crossed 😁🤞🏼
@@a-ztube understandable. Hope your doing well and recovery time is speedy. Feel better 💙 from miami
Thx bro it's much appreciated 😍 🤜🤛 Rcfam4life
Brother Omg 😲 😱 what a Amazing Job you have Done 😍😱 everything looks like it was meant to be 👍😁👍 Love the way you coloured the Wing in 😍 looks Amazing 👏 I like the fact you show us everything and put links in the Description for us all 😁 can't wait to see it Run bro 🤗🤗 really enjoyed every second Brother 😍you have a wonderful week ahead and Stay safe 🙏 😁🥰😎🥰👍🙏
Hey hey Mr BOOOM 💥 🔥 😍 🙌🏽
Thank you very much Big Brother for your kind words means a lot to me 🥰🙏🏽
Yes next step will be brushless Upgrade than on the street after that Iam planning to install some FPV 😜😃💪🏾...
You too Brother and stay safe ✌️🏽 😎 🏄🏽
that looks sick, awesome job bro, can't wait to see what is it capable of. Great video as always!
Thank you so much Habib kalby 🥰🤜🏽🤛🏻
Yes were going to see how it performs soon inshaALLAH 😁💪🏾🏎💯💥
Kinda disappinted you never did a performance video after these body mods...i may go this route,but not sure it handls as good as it looks..
Can you make 2 more and ill buy them from you
Welcome my friend 😁👍 you really want ?
Yeah now I can see ya babe with my own eyes!!! 💩Is this awesome. It's like you want it! Now you can install the light and do the nightrun!!!
THX Bro much appreciated 😍 🙌🏽
It's tottaly like I wanted next step brushless setup and a little fpv mod 😉💪🏾
Nice production as well sub’d will hook you up with a test unit of something soon if you game I think you’ll like it
THX Bro going to check your Channel aswell 😉🤜🏽🤛🏻
Yeah let me know what it is 😍👍🏽
Show us it running. This was click bait.
Is coming together with the Brushless high speed upgrade 😉
What you mean by clickbait 😂🙈
looks sweet bro!👍🏻 sub 3001
THX Bro 😍 🙌🏽
Have a nice weekend 😊 👍🏽
Lol world's fastest bruh you only changed the wheels wing and exo sceleton it's all stock
Bro you must read the title and description correctly it's part 1 from more videos so the build isn't finished and the world's fastest is in cling and with question mark 😉😁
124016 is faster
Sure mate it's Brushless stock 😁👍🏽
@@a-ztube im serious
Beautiful 👌👌👌
Thx bro 😍🤜🤛