3 Essential Things to Do on the WLTOYS 124019

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 166

  • @beyondRC
    @beyondRC  4 роки тому +16

    *MERRY CHRISTMAS*
    I know a lot of people probably asked santa for a 124019 so be sure to do these 3 essential things to make sure you have a fun and action packed Christmas!
    A lot of my inspiration to make this video came from the original 144001 3 essential items which has proved to be really popular on the channel so if things aren't clear on this one be sure to revert back to the old one as these models are essentially the same just a longer wheelbase!
    Have a wonderful Christmas and I will be seeing you all in 2021 where we will have an amazing year of RC on the channel!
    Take care, stay safe and enjoy your RC goodies (If you were good!!) 😎❤🥰😍

    • @roblowrie1969
      @roblowrie1969 4 роки тому +2

      I can't remember without going back and finding it, but did you take the toe in off the rear wheels on the 144001, and would you do it to this? 👍🏻

    • @beyondRC
      @beyondRC  4 роки тому +1

      Yes I did well spotted. That was actually in my optional things to do on the 144001 video! 100% as mentioned my intention is to go brushless and see how fast i can get this baby to and want everything to be as perfectly straight as possible. I will also be doing another vid demonstrating those optional things again but with this 124019 the rear toe, droop screws etc.
      Not essential for the running of the car but will definitely help! Expect that video very soon!
      Merry Christmas 🎅

    • @roblowrie1969
      @roblowrie1969 4 роки тому +2

      @@beyondRC I think there were 6 things I did to my 144001, the droop screws being one of the extra 3. 👍🏻
      My son loves his HBX16889 that he got for Christmas. Good job I ordered the oil filled shocks, as it handles a whole lot better with them. 👍🏻
      Merry Christmas to you and yours. 👍🏻

    • @stekeel6993
      @stekeel6993 4 роки тому +1

      Merry xmas

  • @bangurhead4027
    @bangurhead4027 4 роки тому +6

    Man.... I wish there was advice like this given on the 144001 back about a year and a half ago. It would have saved me a SHIT TON of grief and anxiety. I hated dealing with broken everything when the 144 1st came out and we did not have many replacement part suupliers, except for the LC racing parts cross reference, that didn't fit quite right back then. Funny how time changes everything!!! The helpful videos like this along with the fact that WL Toys started making essential replacement parts that were much needed to run these beasts of 144, 124 prefixes have MADE ALL THE DIFF'S MAN, THANK YOU!!! 👍‼️💯

    • @beyondRC
      @beyondRC  4 роки тому +2

      Sorry man!! Only started my channel this year but its something i should have done years ago! But better late than never i am here now and will keep making these guides to help people get the best from their RC's! WLTOYS make some great models but not without there faults. Thanks and enjoy :)

  • @johnellefa
    @johnellefa 2 роки тому +1

    My greed made me get this one too (bought the 144001 last month) now I can use this video as well. Cheers bro!

    • @justin1941
      @justin1941 Рік тому

      which ones faster

    • @johnellefa
      @johnellefa Рік тому +1

      @@justin1941 for me the 144001 feels faster. Likely because its lighter. But the 124019 feels much more stable IF you brushless convert

  • @nullpointer1984
    @nullpointer1984 6 місяців тому +1

    Great video, loved it, at first the title had me a bit worried that I would be recommended to buy a bunch of stuff. I this was good maintenance love the adjustable steering angles as well, nice car.

    • @beyondRC
      @beyondRC  6 місяців тому

      Glad it was helpful!

  • @DriftomaniacsRC
    @DriftomaniacsRC 4 роки тому +1

    10:15 agreed the toe out on the stock 124019 or 144001 makes for 'lively' handling if you go brushless, toe in def needed for speed run stability.

    • @beyondRC
      @beyondRC  4 роки тому

      Lively indeed! 😁😆😆

    • @roberttruesdell6151
      @roberttruesdell6151 3 роки тому +1

      On a speed run car you don’t want any toe in. You want it to be 0. Toe in or out adds drag and tire wear.

  • @Boden_Worms
    @Boden_Worms 3 роки тому +3

    Thank you so much for the tutorial! I will totally use it when i get mine

    • @beyondRC
      @beyondRC  3 роки тому

      You’re welcome 😊

  • @anthony.baxter3985
    @anthony.baxter3985 4 роки тому +1

    Merry Christmas excellent intro video you know I got my 124019 at the house. I'll be following all your videos on this just like I did on the 144001 again my man merry Christmas ..

    • @beyondRC
      @beyondRC  4 роки тому +1

      Merry Christmas Anthony! Thank you glad you enjoyed! Many vids on the way for this one and some treats in the new year. Also thanks for the email the collection is looking great. I think you will like what i have planned for the 124019 in the coming weeks! Would love 100mph out of it! Merry Christmas!!

  • @changcoua08
    @changcoua08 3 роки тому +1

    Thanks for the video. I just got mines. Will do this later.

    • @beyondRC
      @beyondRC  3 роки тому +1

      Hope you like it!

  • @edwinnegron7761
    @edwinnegron7761 4 роки тому +2

    Got my eye on this one so thank you for the tips in advance!!!!

    • @beyondRC
      @beyondRC  4 роки тому

      No worries be sure to check out the 3 Recommended things to do on the 124019 as well which will be dropping very soon!

    • @jeffbryner5355
      @jeffbryner5355 3 роки тому

      Do yourself a favor and don't buy Chinese off brand junk. Do yourself a favor and get Name. brand. You can get a Traxxas bandit for 20 bucks more if your worried about price. So many upgrades. Parts are everywhere and u don't need to do anything put of the box like this Chinese junk

  • @Bathurst_1000
    @Bathurst_1000 3 роки тому +2

    Hi there, can you do a SLOWER VIDEO on how to take both ,Ft & REAR DIFF's as this is my first WLTOYS RC BUGGY
    Thank You so very much for your help.

  • @rcscrapyard4378
    @rcscrapyard4378 3 роки тому +2

    Still waiting for mine.. cant wait to see what you do to her!

    • @beyondRC
      @beyondRC  3 роки тому

      she is a work in progress videos to follow....

  • @J2I3H
    @J2I3H 3 роки тому +5

    Stronger driveshafts would be a good upgrade. I keep bending the ones on the rear..

  • @Beazy-0
    @Beazy-0 4 роки тому +1

    Merry Christmas and thanks for the video!

    • @beyondRC
      @beyondRC  4 роки тому +1

      Merry Christmas 🌲🎅🎄

  • @therctutor8100
    @therctutor8100 3 роки тому +2

    When adjusting camber and toe, you should use gauges so that both sides are the same. Also when adjusting toe and camber you should twist the centre of the rod instead of unscrewing the end link.
    One more thing to adjust would be the ride height. This car comes from the factory set at a very high ride height. This adjustment can be made via the shock collars.
    Good info though, great job. Keep it up

  • @kodex7711
    @kodex7711 3 роки тому +1

    Where did you get that meddle tool fortune bolts i need it cause the plastic one sucks

  • @furyss1tv184
    @furyss1tv184 4 роки тому +1

    Thanks for the vid. Merry Christmas

    • @beyondRC
      @beyondRC  4 роки тому

      Merry Christmas 🎄🎅

  • @bigbeardrc4145
    @bigbeardrc4145 4 роки тому +1

    Merry Christmas buddy all the best.great video as usual

    • @beyondRC
      @beyondRC  4 роки тому

      Thanks mate! Merry Christmas! 🌲🎅🎄

  • @jbsrcs6273
    @jbsrcs6273 4 роки тому +2

    Should be getting mine in 2 weeks. Can’t wait! I will definitely check these things out since I’ll be using a 3s immediately.
    Merry Christmas 🎄🎁 ☃️

    • @beyondRC
      @beyondRC  4 роки тому +1

      Exciting!! Merry Christmas!!

    • @bangurhead4027
      @bangurhead4027 4 роки тому +4

      To all you folks buying the 144001 or the 124019, change out the plastic hubs for metal ones before you even start running the thing guys, they break upon first contact with the front of the car to anything, so save yourself a HUGE headache and order the parts ASAP!! 💯👍

    • @bangurhead4027
      @bangurhead4027 4 роки тому +3

      If you're using 3S, make sure the ESC is proper. 👍💯

    • @beyondRC
      @beyondRC  4 роки тому +2

      Some of them can handle 3s some can't its very much a lottery! Personally I didn't risk it and just switched to brushless on the 144001 try it at your own risk on the 124019 but there is a high chance it will go up in smoke 🤣

    • @jbsrcs6273
      @jbsrcs6273 4 роки тому +1

      @@beyondRC I’m ok with that. I do already have a brushless set on order, but that’s for a tamiya I have coming. I’ll just use it on the WLtoys instead if I have to. 🤔☺️👍🤕😬

  • @sy55legrc
    @sy55legrc 4 роки тому +2

    Nice one Matey, can’t wait to get mine in January!!!

    • @beyondRC
      @beyondRC  4 роки тому

      Cheer mate you will love it! The 144001 and this are beasty little machines!

  • @wintxrx4909
    @wintxrx4909 3 роки тому +2

    i need help im not sure how to charge it without breaking the batteries

  • @jiroup7390
    @jiroup7390 2 роки тому

    Im trying to do a brushless conversion on this, so I took the motor and mount out, heated up near the screws and ready to take apart, only issue is that the screw stripped. Not even that much force put into it, and the screw head completely shred

  • @DriftomaniacsRC
    @DriftomaniacsRC 4 роки тому +1

    One of my front shocks was overfilled, it would have ended badly had I not noticed as it wouldn't compress more than about 5mm!

    • @beyondRC
      @beyondRC  4 роки тому

      So common on these Richie not as bad as the 144001 but something worth checking!

  • @feedle2003
    @feedle2003 3 роки тому

    Great video just received mine through the post will start to strip her now 😀

  • @AddyRCBuddy
    @AddyRCBuddy 4 роки тому +2

    Nice explained man, love the look of 124019 and that paintjob looks awesome. It's time to get it dirty 😸😸

    • @beyondRC
      @beyondRC  4 роки тому

      Thanks man yeah the paint job is amazing I wasn't sure from the photos but in person it's very nice! 😎

  • @lelakisejati4456
    @lelakisejati4456 3 роки тому

    -3:00 i dont think it need to unscrew? .. i mean why dont turn on the turnbuckle?

  • @sc10rs
    @sc10rs 4 роки тому +1

    Love my 144001, will have to grab one of these 😊🤙🍻🇦🇺

    • @beyondRC
      @beyondRC  4 роки тому +1

      If you love the 144001 you will love this 😯

  • @LinesCreations
    @LinesCreations 2 роки тому

    Can u plz do a video on how to take the diffs out?

  • @Bathurst_1000
    @Bathurst_1000 3 роки тому +1

    Also what should the oil level be in all 4 shocks on the == 124019
    Cheers mate

  • @Donobansan
    @Donobansan 4 роки тому +1

    I'm having great trouble taking the shocks cap off. When using the pliers, do you place it on the black plastic part or on the metal cap to turn? I don't want to snap the black plastic if it's not supposed to be taken off that way. Even trying with the metal cap, it's really tight. Have tried holding base end with another set of pliers. Just want to know the exact technique and placement as it's my first time taking shocks apart and everyone doesn't show their first few attempt on the 124018/9.

    • @beyondRC
      @beyondRC  4 роки тому +1

      Take the spring off so its out the way. Grip the body of the shock and pliers on the metal cap and turn it should come off just be careful not to bend or break anything! Not sure why they are so tight on the 124019's as the 144001's came off quite easily.

    • @Donobansan
      @Donobansan 4 роки тому +1

      @@beyondRC thanks, I'll summon the courage and patience to try again.

    • @beyondRC
      @beyondRC  4 роки тому

      Good luck haha!!

  • @THEMASKEDMASTER
    @THEMASKEDMASTER 4 роки тому +2

    ✌🏻😎🏴󠁧󠁢󠁷󠁬󠁳󠁿3 essential things I do to wltoys. REDUCE REUSE & RECYCLE ♻️ 😂.
    Also never say” working correctly” next to each other. Many people will hear you say “work incorrectly”.

  • @tr4shyt4ct1c
    @tr4shyt4ct1c 2 роки тому

    i just ordered this rc car and it is my first but which screw driver can i get the best and where can i get shock oil and grease for cheap thx if anyone replies

  • @joski9030
    @joski9030 3 роки тому

    Wont the sand / dirt just eat the diff away like a bike sprocket covered in to much oil? I’ve just got mine not used it yet but keep seeing everyone saying grease them.

  • @antonpieterse8844
    @antonpieterse8844 3 роки тому +2

    Can you use wheel bearing grease for the diffs?

    • @beyondRC
      @beyondRC  3 роки тому +2

      dont see why not. Anything will be better than running them dry!!

    • @keveshannaidoo5670
      @keveshannaidoo5670 3 роки тому

      Use wheel bearing grease and add a bit of engine oil ...makes a good mix...thins the wheel bearing grease down ....should have constant lubrication with enough of flow in the diffs

  • @philhumber1534
    @philhumber1534 4 роки тому +1

    Also forgot to add the droop screws to lower the front end for those doing speed runs...

    • @beyondRC
      @beyondRC  4 роки тому

      That is coming on the next vid mate very important mod and i haven't forgotten about it! Hope you, Sawyer and the family had a great Christmas! Cheers

  • @routersdongles1311
    @routersdongles1311 3 роки тому +1

    good thank you

  • @jimmybenyoucef4416
    @jimmybenyoucef4416 2 роки тому +1

    Looks cool

  • @Rocker6969
    @Rocker6969 9 місяців тому +1

    Good video on the car. The trap/crap music is horrible.

  • @scottc95
    @scottc95 3 роки тому +1

    if you put off road tires on this would it be good off road?

  • @chrisf5475
    @chrisf5475 3 роки тому +1

    I’m new to using rc car controllers (flown rc planes for years) can somebody tell me please, is it normal to have a delay with the motor changing direction going from forward to reverse? Is this because of braking... maybe it won’t let me go straight from forward to reverse at speed to protect the gears?

    • @2wyldrc195
      @2wyldrc195 3 роки тому +2

      That is totally normal. The car will try to protect its gears by doing this. Normally the car will brake until it is stopped and then will need another tap on reverse to get it moving!

  • @ObsessedGarbageDotCon
    @ObsessedGarbageDotCon 3 роки тому +1

    When greasing the diff is that something that can be done at some point later on or should it only be done when we first get the 124019? Thanks

    • @beyondRC
      @beyondRC  3 роки тому

      ideally as soon as possible to prolong the life of the diff. :)

  • @EyesOnRC
    @EyesOnRC 4 роки тому +1

    A lot of screwing here :P Awesome content as always mate!

    • @beyondRC
      @beyondRC  4 роки тому

      Thanks mate! Hope you good and merry Christmas. 🌲🎅

  • @garethhuwwilliams6019
    @garethhuwwilliams6019 3 роки тому

    Anything to do about the rear wheel toe in?

  • @ClassicRedEye
    @ClassicRedEye 3 роки тому +1

    Would you recommend filling the diff with grease or would a good spray of lubricant would do the job on brushed?

    • @beyondRC
      @beyondRC  3 роки тому +1

      grease all the way! The spray will be too thin and i think it will just leak out

  • @gillian9178
    @gillian9178 4 роки тому +2

    For speed runs also take out the toe in on the rear wheels, simple job by removing the 2 screws holding the metal plate at the rear of the chassis. Then turn the 2 plastic inserts that are held in the metal plate, these plastic inserts have 2 holes in each insert that hold the A arms hinge pins. By turning the inserts it moves the hinge pines further inboard & setting the rear wheels straight with no toe in.

    • @beyondRC
      @beyondRC  4 роки тому +1

      Oooo that's on an upcoming video!! 🤪😎

  • @dukefabre6
    @dukefabre6 3 роки тому +1

    can i use silicon grease for the diff gear...

    • @beyondRC
      @beyondRC  3 роки тому +1

      should work fine :)

  • @ilovejesus973
    @ilovejesus973 4 роки тому +1

    Great video .👍👍

    • @beyondRC
      @beyondRC  4 роки тому

      Thank you! 👍👍

  • @yiarkungfu
    @yiarkungfu 3 роки тому +1

    What is the battery life with the car stock? Would it improve with a brushless conversion?

    • @beyondRC
      @beyondRC  3 роки тому

      Best I had was 12mins. Certainly as brushless systems are more efficient 👍

  • @leonardwmw
    @leonardwmw 3 роки тому

    just had mine delivered, great fun with it! but is somehow stops automatically i believe is due to some over heating somewhere as when the car cools down it runs again. How can this be avoided or improved on?

  • @kmodkese
    @kmodkese 3 роки тому

    What is the tooth count on the front & rear diffs. (Ring, & Pinion) also how tall are the tires?

  • @roberttruesdell6151
    @roberttruesdell6151 3 роки тому

    Can you use silicone diff fluid in the diffs? Or are there no seals?

  • @veteranrc5307
    @veteranrc5307 3 роки тому +6

    Just ordered the 124017 brushless version….148$ American

    • @Harsidh_a
      @Harsidh_a 2 роки тому

      124017 is bad

    • @hukkerz
      @hukkerz 2 роки тому +2

      I have the 124017 it's great as long as it's the v2 .

    • @206beastman
      @206beastman 2 роки тому

      Is it to late to buy one now I have the losi mini b and t brushless I'm a year late is there a new model

    • @reddingdj9826
      @reddingdj9826 2 роки тому +2

      @@206beastman its not too late, the v2 is one of the best wltoys, and you can get it shipped from the us now

  • @adamlw7181
    @adamlw7181 2 роки тому +1

    When you link the cars to buy from Bangood are they from your prefered sellers because there are many selling the same cars. Do you have a history with buying from the people you link and is it safe to purchase from them? I have a bad history after buying things from China etc. Cheers.

    • @beyondRC
      @beyondRC  2 роки тому

      Banggood deal with all the sales there are no multiple sellers like aliexpress anything bought on banggood is sold and processed by them. Banggood are an extremely reputable company I work in close contact with them on a daily basis. Most of the cheaper cars on the channel are sent to me by them to review and they have never let me down!

    • @adamlw7181
      @adamlw7181 2 роки тому

      @@beyondRC Hi, thanks for the reply. How come Is multiple results for the same car (all with different prices) when I search for it? This was the reason why I thought there were multiple sellers.. Thanks!

    • @adamlw7181
      @adamlw7181 2 роки тому

      Nevermind that last question, apologies!

  • @andythecreator4826
    @andythecreator4826 4 роки тому +1

    Hi, new to this. What sort of oil would you have used for the shocks if it was needed? Thanks!

    • @beyondRC
      @beyondRC  4 роки тому +2

      30/40wt is what it comes with I believe. I run 30wt on fronts now and 60wt on rears. Thanks

    • @andythecreator4826
      @andythecreator4826 3 роки тому

      Thank you!

  • @ilovejesus973
    @ilovejesus973 3 роки тому +1

    What shock oil does the wltoys 124019 use 50 or 40 ? 👍👍👍

    • @beyondRC
      @beyondRC  3 роки тому

      i think it is 30wt/40wt stock

    • @miketsiou
      @miketsiou 3 роки тому +1

      @@beyondRC do you mean it's 30wt front and 40wt at the back? if I need to add some oil to the shocks what weight should I use?

    • @beyondRC
      @beyondRC  3 роки тому +1

      I think the car comes 30wt front and back

  • @philipherron9318
    @philipherron9318 3 роки тому +1

    Hey I wonder can you help me.my friend and I are going to get this RC and mod them differently to see who can get the most out of there's but I think they're both on the same frequency do you know how I could change my frequency?

    • @beyondRC
      @beyondRC  3 роки тому +1

      you can use multiple vehicles at the same time they are all 2.4ghz but will change frequency automatically just switc one on let it bind. Then do the other you will be good to go

  • @Yayo509
    @Yayo509 2 роки тому

    what oil would i need for those shocks?

  • @V8chump
    @V8chump 3 роки тому +1

    Hey bud have you ever had problems stripping/snapping screws on these wltoys cars? Heard the “rckiwis” say they’re pretty fragile but the guys a monster so it might just be him

    • @beyondRC
      @beyondRC  3 роки тому

      i have had a couple stripped screws in the past the hardware used it rubbish!

  • @cdoug5747
    @cdoug5747 3 роки тому

    What do you think about a mamba micro x upgrade?

  • @InnerSanctum77
    @InnerSanctum77 4 роки тому +4

    I'm new to the hobby - just wondering if you guys ever get these metal parts kits. Does it help with durability??

    • @beyondRC
      @beyondRC  4 роки тому +5

      Hey welcome! So i only ever ran a metal kit on an RC once and found that they can help durability but where they make one area stronger on an impact the energy just gets sent to the next weak point and will break there so in fact what they are trying to solve they actually cause the same issue. Its like trying to fix one problem then causing another. Thats my opinion anyway but there are many different views on metal kits.
      Plastic has the ability to flex and that is why you cant go wrong. My opinion anyway...

    • @nickk8054
      @nickk8054 3 роки тому +3

      If you run hard jumps, bumps and others, it is very helpful for a newer driver

    • @oktawianjuszczak5178
      @oktawianjuszczak5178 3 роки тому +1

      Search for fb groups like wl toys 144001 and other, they will tell u everything u doesn't know about em

    • @harushushu
      @harushushu 3 роки тому

      Plastic is durable

  • @JamesFitzgerald05
    @JamesFitzgerald05 4 роки тому +1

    Getting a video out on Xmas day! Skillz

    • @beyondRC
      @beyondRC  4 роки тому

      Got to be done! Have a good one! Merry Christmas 🎅🎄🌲

  • @kriskerry1
    @kriskerry1 3 роки тому

    Hello, how much oil should be in the shocks or what is the right amount?

  • @venture7o7
    @venture7o7 4 роки тому +1

    Can you use the same phat bodies cover for the 144001 on the 124019?

    • @beyondRC
      @beyondRC  4 роки тому +1

      no it will be too short but Phat bodies do sell other bodies that will be compatible with this!

  • @R1aKoC8
    @R1aKoC8 3 роки тому

    Whats the lvl of CST that you suggest? bcoz as I can see, they have many options.

  • @davidzz4750
    @davidzz4750 3 роки тому +1

    Can i use WD40 for grease??

  • @halfpastblog
    @halfpastblog 3 роки тому

    Great info. Do you think the new brushless version coming out will require the same assistance?

    • @beyondRC
      @beyondRC  3 роки тому +2

      I'm hoping the new versions are good to go out the box but wltoys didn't address the issues with this one even after all the 144001 fans complained about dry diffs and shock issues 😐

    • @halfpastblog
      @halfpastblog 3 роки тому +1

      @@beyondRC I guess we shall find out shortly.

    • @SEEYAIAYE
      @SEEYAIAYE 3 роки тому

      @@halfpastblog I was going to order one until I saw people complaining of cogging issues right out of the box, got a 124019 coming instead.

  • @RandalSaint
    @RandalSaint 4 роки тому +2

    Great stuff!! Thanks for walking us thru it, no doubt best 3 things to do first! Looking forward to what you do next with your 124019!! My silly trick for my dumb azz when it comes to the toe and camber, count the turns, remember which way I turned it, cause I can always turn it back, lol 😆

    • @beyondRC
      @beyondRC  4 роки тому

      Glad you liked it! haha thats always best!!

  • @mansurrahim
    @mansurrahim 3 роки тому

    Got mine today. I have a clicking sound from the motor or diff when I just move it - is that normal?

    • @kocarolinaent
      @kocarolinaent 3 роки тому

      Do you mean when you just push it around, or do you mean while driving it?

    • @mansurrahim
      @mansurrahim 3 роки тому

      @@kocarolinaent it was just while pushing it around. Seems like it is supposed to be ok.

  • @falatalane
    @falatalane 2 роки тому

    Funny thing is that in different video they say - Dont put too much grease intro diferentials 😅

  • @homeworkpictureshq
    @homeworkpictureshq 2 роки тому

    Awesome

  • @a-ztube
    @a-ztube 3 роки тому +1

    Very nice review Mate like your Channel one more sub 😉👍🏽
    keep it up and stay safe ✌️🏽 😊

  • @kotetsujin3493
    @kotetsujin3493 4 роки тому +1

    Also try the lc racing ones

    • @beyondRC
      @beyondRC  4 роки тому

      I will do. Would love an LC racing on the channel!

    • @kotetsujin3493
      @kotetsujin3493 4 роки тому +1

      👍🏻

  • @IamCool824
    @IamCool824 Рік тому

    Toe in and toe out. The former is good for a straight path.

  • @user-bd2yw7yt1h
    @user-bd2yw7yt1h 3 роки тому +2

    To much grease can sometimes be a problem friction and expansion. It's possible to over pack a cv joint blowing the boot. Just saying 👍

  • @danielli2522
    @danielli2522 2 роки тому

    What about the 104019

  • @patmarcus172
    @patmarcus172 3 роки тому

    Ive managed to do the shocks (fine out of the box) and the front and rear toe in (both badly out) but when I came to watch your section on greasing the diffs the video races through how you actually get to them. Having never done this before to any RC Im nervous. Is there anywhere I can see that bit at normal speed to make sure Im doing it step by step ?

  • @philhumber1534
    @philhumber1534 4 роки тому +1

    seen a couple of other vids where to check the top deck as well as its 4 screws maybe loose, also check out the steering mod, its on John Robinsons site but ben.j.harris@gmail.com does a mod where it takes out all the steering slack on this and the 144001 as well. £8 is what it is from what i know.

    • @beyondRC
      @beyondRC  4 роки тому

      Cheers Phil. Will be looking at getting the steering mod and trying it for myself. not a bad price either!

  • @softrc6749
    @softrc6749 3 роки тому

    👍

  • @anonymousmc7727
    @anonymousmc7727 2 роки тому

    I call it the 12-40-19

  • @conradloag7046
    @conradloag7046 3 роки тому +1

    Christmas 2056

  • @Bayerische_Motoren_Werke
    @Bayerische_Motoren_Werke 3 роки тому +2

    십자 ㄱㅎ

  • @jeffbryner5355
    @jeffbryner5355 3 роки тому +1

    So 3 things you need to do to a brand new car? Lol. You shouldn't have to do anything out of the box if it's brand new. Lol.

    • @beyondRC
      @beyondRC  3 роки тому

      Exactly but unfortunately with these clones things aren't great out the box it's part of the problem buying a clone but excellent value for money once the minor issues are addressed

    • @jeffbryner5355
      @jeffbryner5355 3 роки тому +1

      @@beyondRC yep. I bought a few Chinese rc's in my day and learned my lesson lol. I still have my exceed terrain 10 and its a pos lol. What's funny is the chassis looks dang close to this wl toys 123456 or whatever it's called in this video haha. Good video though. My friend. It helps out the people who actually did buy this

  • @02semiata
    @02semiata 3 роки тому +2

    Just buy a better RC car from a real brand. This is just cheap junk

    • @beyondRC
      @beyondRC  3 роки тому +1

      Not everyone has the budget for that which is why these cheap little buggies after some mods are great for the price. I just got the ARRMA Typhon V5 6s and with a decent set of Lipo's that costs almost 10x what this costs. Its great but very expensive for some people and not ideal for someone getting into RC which is where these cheap RC's shine! Thanks for your comment :)

    • @02semiata
      @02semiata 3 роки тому

      @@beyondRC loads of cheap Rc from Losi and AE. Losi does a mini rtr for 180 bucks all in. Much better

  • @JoseMLopez-dc9yd
    @JoseMLopez-dc9yd 3 роки тому

    No tienes ni idea. Para regular la caída de las ruedas no se necesita quitar ningún tornillo. Lo dicho. Ni p... idea.

  • @dhikawigiarizky8844
    @dhikawigiarizky8844 3 роки тому

    Gak bisa bahasa Inggris

  • @TexasBulldog74
    @TexasBulldog74 2 роки тому

    1st step, don't buy it... 2nd step if you do... throw it away and get a real RC brand car like Traxxas, Team Associated, Team losi, HPI etc