Remote controlled lawn mower DIY 4WD

Поділитися
Вставка
  • Опубліковано 13 вер 2024
  • DIY RC lawn tractor.
    CAD files are available. They are not fully completed.I can share with those who are interested. For this you need to write any comment here, for example:" well you did shit" and also wrote me a request to share.Any comment under the video it's easy for you to do it. This way you will support me. I spent a lot of time making these plans and I'm not asking for any money for this,it is free.
    CAD files request access link drive.google.c...
    These files are as an example,all other dimensions depend on the configuration you choose yourself.

КОМЕНТАРІ • 88

  • @stanleycheng1375
    @stanleycheng1375 5 місяців тому +2

    Awesome, fantastic! This DIY RC lawn mower is one of the best, even if not the best, I have seen. It effortlessly cuts tall grass, due to the 4-wheel-drive design, it manoeuvres well in difficult terrains such as slops, it weighs ideally for stability in mowing grass and moving in various directions while not over burdening the motor . Well done! I would humbly suggest you to refine, package and commercialize this fantastic mower. Thanks

    • @marmasteris
      @marmasteris  5 місяців тому

      Thanks you for the high rating.

  • @jeremycareystudios917
    @jeremycareystudios917 Місяць тому

    best remote mower I've seen so far. I think I'd like to follow this and change to tracks

    • @marmasteris
      @marmasteris  Місяць тому

      Yes, tracks would be better.

  • @eddiejimenez
    @eddiejimenez 14 годин тому +1

    great

  • @dbc105
    @dbc105 3 місяці тому

    Been looking at several of these mower builds and there arte things you've done here I like a lot, the tires will not chew up the lawn, the motor setup is not high dollar wheelchair/scooter parts, and it is wide. I would like to get a copy of the CAD files and anything else that applies. Good job and many thanks for sharing. DC

    • @marmasteris
      @marmasteris  3 місяці тому +2

      CAD files request link in description under video

  • @healthnature6240
    @healthnature6240 2 місяці тому

    I appreciate your work! Well-done!

  • @bernardhebrear2566
    @bernardhebrear2566 2 місяці тому +1

    Très très bon travail

  • @moreover-jw3iu
    @moreover-jw3iu 3 місяці тому

    전문가의 솜씨네요. 훌륭합니다.

  • @spectra409
    @spectra409 4 місяці тому +1

    On dirait un petit char ❤

  • @animale8809
    @animale8809 4 місяці тому

    Very good work, I want to build one too

  • @ModeratelyOtaku
    @ModeratelyOtaku 4 місяці тому

    I like how your motors are centered rather than near the ends of the mower

  • @danfreitas7905
    @danfreitas7905 10 місяців тому

    Best design/workmanship I've seen so far for a rotary mower. The cat likes it too. Additional footage of the build would be good to see. What horsepower motor did you use?

    • @marmasteris
      @marmasteris  10 місяців тому

      Motor 15.6-18.5HP.The cat is a technical expert😀

  • @ericbaut
    @ericbaut 8 місяців тому

    AWESOMEE!!! PLEASE WIRING CONNECTIONS I NEEDED YOURE GOOODD

  • @1FishinAddict
    @1FishinAddict 11 місяців тому

    Very cool looking build 👍

    • @lehbarbosa6326
      @lehbarbosa6326 6 місяців тому

      Gostei muito do projeto
      Mas porque trocou as rodas?

  • @pasindhuperera4725
    @pasindhuperera4725 3 місяці тому

    GOOD JOB

  • @ErChompy
    @ErChompy 2 місяці тому

    It's awesome, can you show the cutting parts? are blades?

  • @SergeREYNIER
    @SergeREYNIER 3 місяці тому

    Super projet ! est-ce qu'elle broie les herbes très haute? (Mulching) Si je pouvais avec les plans, merci.

  • @cottonwoodcreative
    @cottonwoodcreative 6 місяців тому

    is there a reason you got rid of the meaty tires? if its because of the skid steer the geometry might just be bad if you are too long and not wide enough it will result in alot of slipping around but i liked the knarley tires.

    • @marmasteris
      @marmasteris  6 місяців тому +1

      The meaty tires tear up the lawn when turning, that's why I changed them.

  • @toddthomas3226
    @toddthomas3226 9 місяців тому

    Your very talented

    • @marmasteris
      @marmasteris  9 місяців тому

      Thanks, but I didn't know about that😁

  • @jcagnin1
    @jcagnin1 6 місяців тому

    Muito bom mesmo..
    Parabéns guerreiro

  • @muscularthumb
    @muscularthumb 6 місяців тому

    Well done 👏

  • @fatoshistorias9573
    @fatoshistorias9573 Місяць тому

    hii congrats for your project, can you inform me which is the torq of your reductor for pushing the litle car ?

    • @marmasteris
      @marmasteris  Місяць тому

      DC brushed motors 4pcs AWD
      24V 350W motor main technical parameters:
      No-load current: 2.0A
      Rated output power: 350W
      Rated speed: 3200rpm
      Rated torque: 1.11N.m
      Rated current: 12.5A
      Efficiency: 78%
      Reduction ratio: 9.78: 1
      Actual speed: 330 rpm

  • @davidsantin
    @davidsantin 4 місяці тому

    geniale!

  • @digdilem
    @digdilem 4 місяці тому

    I've done a few, so great to see someone else's vision. I see you're using an alternator off the shaft - when I did that with a 24v alt, I found it got extremely hot as it's constantly working at max capacity, and eventually its shaft would swell and bind against the bearings. Do you have any similar problems?

    • @marmasteris
      @marmasteris  4 місяці тому +1

      No, there is no problem with the alternator.Alternator 24V,120A, max.consumption 70A at zero turn,so the alternator is not fully loaded.

    • @digdilem
      @digdilem 3 місяці тому

      @@marmasteris Interesting - that might be my issue - my alt is only 52a and I've got four wheelchair motors. The 5.5hp engine isn't quite powerful enough to run the alt and cut thick grass either, so I've just removed it and put a couple more batteries there for now, lasts an hour of heavy use which is a full tank of petrol too.

  • @rmfetter56
    @rmfetter56 4 місяці тому

    Awesome content, doyou have the specs available & also the Cad drawings. What motors are you using for the 4x4 and also the 3 motors for the grass cutting blades. What is thesize and weight of your machine? Thanks for any help you can provide.

    • @marmasteris
      @marmasteris  4 місяці тому +1

      4x4 motors DC 350W,24V.Lawnmower weight about 230kg.Grass cutting motor 18.5HP (max.power) internal-combustion engine.

    • @Tinkerbell227
      @Tinkerbell227 4 місяці тому +1

      I would like to get the cad plans or hire you to make me 2 of them. One as a mower. And the other with just a flat deck on top to move stuff around like car motors. A machine simular to the one at minute marker 9:42. But I want turf saver tires on the mower instead of wheel barrel tires and those bar tread tires on the mover.

    • @marmasteris
      @marmasteris  4 місяці тому

      @@Tinkerbell227 CAD files access link in description under video.

  • @Ralf-rk9fx
    @Ralf-rk9fx 4 місяці тому

    Ingenieur!!!

  • @user-sd8rf7xb3g
    @user-sd8rf7xb3g 3 місяці тому

    Hi! Great job! 06:34 its din 985 nyloc nuts?

  • @ayomidesalami9193
    @ayomidesalami9193 Місяць тому

    Please I need to understand how you did the height adjustment

    • @marmasteris
      @marmasteris  Місяць тому

      linear actuator 2pcs,left ang right.

  • @martinchyska1669
    @martinchyska1669 5 місяців тому

    Hello , Thank you for nice build , do you have any plans or material list ? How you build this wheels ? Thank you for Your answer M

    • @marmasteris
      @marmasteris  5 місяців тому +1

      There are plans, but not complete. I redid some parts during the production process. For example, I made the frame without any plans.Motors MY1016Z3 350W 24V

    • @martinchyska1669
      @martinchyska1669 5 місяців тому

      ⁠@@marmasterisHello 😊, thank you for info about motors, but how you build this wheels , rims etc. I see you use supersprox with some adapter ? Hub ? This will help me thank you .

    • @marmasteris
      @marmasteris  5 місяців тому

      @@martinchyska1669 I bought wheels, sprockets and made adapters based on them.There is a lot of turning work here. You can't do without a lathe.Most of the parts are laser cut from 5mm and 6mm steel.

    • @martinchyska1669
      @martinchyska1669 5 місяців тому

      @@marmasterisohh that’s the little problem for me I have non of this devices :( but thank you very much for answering. I would really like to build this stuff but looks like I would need some help 😊. If you can send me some more details I will be very glad. Thank you !!!

    • @marmasteris
      @marmasteris  5 місяців тому +1

      @@martinchyska1669 Look here drive.google.com/file/d/1T8xJqI7PX_VHzxyEESHVz_uwYL2rs1CU/view?usp=sharing Download for better quality.
      Based on this, you can create something of your own and according to your capabilities.

  • @VernLee-y9q
    @VernLee-y9q 4 дні тому

    Maybe I'm blind or just ignorant , But where are the batteries ?

    • @marmasteris
      @marmasteris  4 дні тому

      Good question. The batteries are under the front of the engine, a small box.LiPo 3S 5Ah 2pcs in parallel.Only for powering the starter and RC receiver.After starting, everything is powered by the alternator.

    • @VernLee-y9q
      @VernLee-y9q 15 годин тому

      @@marmasteris Thank you

  • @VernLee-y9q
    @VernLee-y9q 4 дні тому

    Where are the batteries located

    • @marmasteris
      @marmasteris  4 дні тому

      0:05 you can see the batteries a small box under engine in front.

  • @ayomidesalami9193
    @ayomidesalami9193 Місяць тому

    i need access to the google drive please

  • @AB-bp9fi
    @AB-bp9fi 4 місяці тому

    Great project. What electric motors do you use?

  • @user-ub4swkub5sdx
    @user-ub4swkub5sdx 11 місяців тому

    Какой мощности двигатель? И какая ширина покоса ?

  • @AestheticRedditStories
    @AestheticRedditStories 4 місяці тому

    Can i have the CAD Files for this i would love to make this its the best ive seen.

    • @marmasteris
      @marmasteris  4 місяці тому

      go drive.google.com/file/d/1HXx46yHvjCuAM97IAjEQ7mZGNRl4tNNV/view?usp=drive_link I'll see a request to share.

    • @AestheticRedditStories
      @AestheticRedditStories 4 місяці тому

      Thanks ​@@marmasteris

  • @DanoFSmith-yc9tg
    @DanoFSmith-yc9tg 6 місяців тому

    Why aren't all lawnmowers like this?

    • @marmasteris
      @marmasteris  6 місяців тому

      Maybe the manufacturers will see and start producing such mowers 😊

  • @spectra409
    @spectra409 4 місяці тому

    Quelle cylindrée le moteur ?

  • @Kull1645
    @Kull1645 4 місяці тому

    How did you control all 4 motors?

    • @marmasteris
      @marmasteris  4 місяці тому +1

      Radiomaster TX16S transmitter,but it can be anything RC transmitter.

    • @Kull1645
      @Kull1645 4 місяці тому

      @@marmasteris I mean what motor driver board?

    • @marmasteris
      @marmasteris  4 місяці тому +1

      @@Kull1645 120A Dual Way Brushed Motor ESC 12-35V 4pcs.

  • @spectra409
    @spectra409 4 місяці тому

    Sa peine pas dans la broussaille !

  • @nipolengineering7407
    @nipolengineering7407 8 місяців тому

    ❤🇹🇭🇹🇭🇹🇭🇹🇭❤🎉

  • @user-kd8bq6rp6p
    @user-kd8bq6rp6p Рік тому +1

    Цікавий варіант