Below are my affiliate links to the parts and tools you would use to complete this job. I may receive a small commission from the product sales. Thank you! Aftermarket control arms: amzn.to/47NdJB1 Ball joint separator: amzn.to/3Tl7FLA SUV jack stands: amzn.to/3q6VS7t 1/2" drive cordless impact wrench kit: amzn.to/3Kcw00I 1/2" torque wrench for tightening the wheels: amzn.to/3Kcu48E 3/8" drive flex head digital torque wrench: amzn.to/3O1EOru Small flat blade screwdriver set: amzn.to/44HUoQi
Great video! I did this yesterday and man what a PITA when doing it from the ground, still doable though just be aware of overextending the axle when maneuvering the hub into place. Had to disconnect the shock mounting bolts and sway bar as well and used a second jack under the ball joint to align everything in place. Bruises on my arms for days haha
Excellent video footage, and explanations. I may not do it myself without a lift, seems a bit much. But at least I know what to expect from the shop now, thanks!
@@patrickdurant64 I’m not too sure, I usually only work on Lexus and Toyota vehicles. This RDX was a friend’s car. Acura updated the model in 2013, I don’t know if the front suspension is the same or different.
Below are my affiliate links to the parts and tools you would use to complete this job. I may receive a small commission from the product sales. Thank you!
Aftermarket control arms: amzn.to/47NdJB1
Ball joint separator: amzn.to/3Tl7FLA
SUV jack stands: amzn.to/3q6VS7t
1/2" drive cordless impact wrench kit: amzn.to/3Kcw00I
1/2" torque wrench for tightening the wheels: amzn.to/3Kcu48E
3/8" drive flex head digital torque wrench: amzn.to/3O1EOru
Small flat blade screwdriver set: amzn.to/44HUoQi
Great video! I did this yesterday and man what a PITA when doing it from the ground, still doable though just be aware of overextending the axle when maneuvering the hub into place. Had to disconnect the shock mounting bolts and sway bar as well and used a second jack under the ball joint to align everything in place. Bruises on my arms for days haha
@@MikeHunt2053 thanks, glad you managed to get it done on the ground!
Excellent video footage, and explanations. I may not do it myself without a lift, seems a bit much. But at least I know what to expect from the shop now, thanks!
My pleasure!
Not there yet but very helpful. Thank you
You are welcome!
You're the man! thank you so much, the video helped me tremendously !
Glad to hear!
Have you done a video replacing the PCV in an Acura RDX?
@@toyotatundra0455 unfortunately, not at this time
The PCV is right above the alternator and very easy to access. 10mins tops
Would this be same process for 2013 RDX
@@patrickdurant64 I’m not too sure, I usually only work on Lexus and Toyota vehicles. This RDX was a friend’s car. Acura updated the model in 2013, I don’t know if the front suspension is the same or different.
Thank you for replying Good Video
@@patrickdurant64 thanks!