Poizd t3 test and tune! With a civilian audience.
Вставка
- Опубліковано 21 сер 2024
- Shop from these links to help my channel grow! Thank you!
savox SW-1212sg servo on front amzn.to/3UW7N5d
stock Redcat Ascent servo on back amzn.to/48AzJyH
Hot racing over drive in front portals amzn.to/3ToUj0I
overdrive in ring and pinion amzn.to/3TfF5uD
Hobbypark external axle brass amzn.to/3Ii7Qk2
Hobbypark internal axle brass amzn.to/3P4OItI
AMK carbon fiber wheels amzn.to/48xDtAX
WDW cut n shut BFG Krawler tires westdesertwhee...
3D printed squid’nserts sl3drc.com/pro...
sl3drc.com/shop/
komoto 10 2000 kv revolver motor amzn.to/49NYh8i
komoto python x esc www.furitekusa...
Dlux portal trans (right motor) dluxfab.com/Dl...
flysky gt5 receiver amzn.to/3SZ8GHg
-Capra axles
traxxas bigbore 2660 shocks amzn.to/3STRW4h
-13” wheelbase
-10” track width
-custom hinge body mount system
The Red Rocks kicked my Capra's butt a few weeks ago. It's going to take some time to get it dialed in it's looking good. Your little problem could be overheating. Stay safe, my friend. Can't wait to get back out there.
Haha it can be merciless at times. Especially if it’s wet out!
Could be, but nothing feels hot. I’ll get it figured out!
One thing I could say is I have played with the throttle curve and made a really nice long sweet out of it going up it really helped a lot
I have a poizd T3 myself, With a furitek Python X Esc and a 1800 KV snubnose revolver, Stock capra shocks, Treal outer portal brass, Injora 1.9 comp pins and Ali Express carbon fibre beadlocks, And dlux portal transmission no overdrive yet but will be ordering some soon, Pins seem to work really well even with stock foams
Oh dude that’s pretty similar to what I’ve got! Haha definitely get that overdrive 👍🏼
Nice the audience looks like wants to follow you!!!
Yeah buddy! Definitely gotta get on your furicar app and do some tuning for slow-crawl and voltage cut-off. Traction was definitely an issue...trust in the G8's, they'll hook up once scrubbed in.
Luckily I have got the shut off issue resolved! Things are going lots better!
I love that rig , that paint job is awesome . I just built my first comp rig, im running an amk carbon fiber chassis ,capra axles . Outrunner motor ,rhino esc . Gonna start testing it very soon now that the weather is better here . Your power problem could be low battery cut off or esc getting hot , you will figure it out im sure
Thanks man!
Sounds like a nice build! I switched to a slighter larger battery and it did good!
Apparently that cutoff is a thing with those furitek esc's. The Holmes crawlmaster mini v3 works amazing straight out of the box with no tuning required, I'm currently running 2 of them.
That's what I was gonna say too.
Is the crawl master quiet? 🤫
@@HobbyDrop Oh yeah! It's the quietest esc I've ran and like dude said it's great right out of the case.
@@bobbymulwee7641 hmmm 🤔 I’ll have to consider that if I can’t get this dialed in
@HobbyDrop it's basically silent, and so smooth.
I ended up grabbing one I needa see more vids of this thing
I’ll keep em coming for ya :D doing a break down video next week!
When it comes to ESC tuning I would look up Holmes Hobby
That seems to be the common suggestion :)
Im willing to bet its the voltage cutoff. These escs build alot of heat in the foc mode while trying to crawl. Id dish out the 85$ for a crawlmaster.
The python has a weak esc. I pair mine with a castle bec or a direct powered servo off the 4 cell.
on week 3 of waiting for a new warranty python to show up
Castle for now it seems.
I spin my tires lightly 120 wet sandpaper for about 30 - 45 seconds to break them in
Thants not a bad idea, idk why but that just feels like cheating 😂 obviously it’s not, but haha idk what my deal is
Yes the power thing that your having I'm having in my Axial to people have suggested to me a direct power servo or get a BEC or if you can turn up the internal BEC if you have one. Otherwise Great video! Also on a side note if you turn down your steering endpoints that prevented it for me but might not work for you?
Or you can always just change the ESC if required. But I am not an expert just going off of experiences.
@@urbancrawler1459 no I appreciate the suggestions. I have tried a different battery and had no issues! So maybe it just requires a little more juice? 🤷🏻♂️ I also bought a new battery that’s equally as small. I’ll try running that too. I’ll get it figured eventually.
I'm stoked for my Yue one v2
Should be similar to this as far as breakover and axles
Have you tried 4.75 tires with this?
Do you have overload protection on? I'd turn that off and try it. I love furitek in my mini crawlers and I just ordered one of these 1/10 but I got their motor to go with it.
I tried 4.75 trenchers for 1 run. It just didn’t seem quite right. My wheels base is 13” so I feel a bigger tire is better.
I’ve got their 2000 kv revolver as well. I tweaked a few things tho morning. Ima drive it today and see how it does.
The furitek 1/10 ESC are an issue.
I’d bet money that’s the problem.
It looks good otherwise.
Think asked this before what class does the poizd fall under is it a sporty…or does it qualify for a class 2 or 3 rig….those killer comps you guys do out there are a little more open.
Man that paint job is amazing I the light!
Have good one dude
I think I may have got the esc situated. For my area it doesn’t qualify for class 2 or 3. So maybe it’s unlimited? Or sporty 🤷🏻♂️
There should be a bad ass class.
It would qualify!!
@@rcarty419 😂thanks man!!
I have the sporty….digging that have a killer almost class2 needs a body…some scale stuff and a mini sporty in the works…
But want to have 2-4 comp ready trucks is a lot of work….
@@rcarty419 oh that would be cool. Right now I’ve just got 2 class 2s and this ine
Good question, what chassis do you all recommend. I'm thinking of building something ground up the first time. Thinking of using either capra portals, or f10s from vanquish.
Dude honestly I’d to f10s. Hey are dumb expensive but I love the steering you can get from them. This is a fun ground up build and the FB community is VERY helpful
I would try 80mm shocks on portals and a bearing carrier if needed for more clearance. What ESC are you running?
What shock would you recommend at 80mm? It’s the furitech python x
That is a common problem with the Furitek ESC, I’ve had the same issue and I think it’s a voltage drop. Dravtech by Dlux are pretty good but really whatever 80’s you can find. I have desert lizards on my Poizd but they are 90’s on AR45 straight axle.
@@mikeearls8158 ok 👍🏼 well i appreciate the advice! And for watching the video!
What is your opinion on the carbon wheels been looking into them trying to get some feedback before I jump to it
These ones specifically I like because they reduce the track width of the axles. They are kind of a pain to put on. But they are nice and light weight. Everything threaded together nicely.
Hey brother is this the t3 v1 or v2?
It’s the v1. Travis came out with the v2 RIGHT as I started building this one.
Buy good esc good motor
✋ Promo'SM