2000 - 2006 Chevy Silverado Remote Key Fob Programming - How To Pair Program Chevrolet Fob
Вставка
- Опубліковано 22 сер 2024
- A DIY video tutorial on how to program or pair a remote key fob to a 2000 - 2006 Chevy Silverado. You will need an ignition key and all of the key fob remotes you want programmed to the Chevrolet Silverado in order to complete this programming procedure.
To program or pair a remote key fob to your Chevy Silverado:
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the remote key fob simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional remote key fob (including any existing fobs).
12. Turn the ignition switch to the ON position in order to exit the remote programming mode.
This programming or pairing procedure applies to the following models of Chevrolet Silverado:
2000 Chevy Silverado
2001 Chevy Silverado
2002 Chevy Silverado
2003 Chevy Silverado
2004 Chevy Silverado
2005 Chevy Silverado
2006Chevy Silverado
DIY keyless entry remote fob and smart key programming instructions available at www.ProgramYou...
DIY Ignition key programming procedures available at www.ProgramAut...
Find a Locksmith in your area with www.LocateALoc...
Dont you just love older cars otherwise this would have been $800 to $2000 for a stupid key fob on modern cars
Absolutely kevin
Well, this work, even if the check engine light is on
@@james1233666yes
Thank you for this. I bought two fobs that came with a "go to link for instructions" that didn't exist. Your instructions were clear, concise and true. Thanks so much!!!
You're welcome! Glad it helped
2003 Silverado…worked like a dream. Thanks for the video
You're welcome! Glad it helped
Concise instructions, very helpful. I had two remotes, I bought two additional remotes only took a few minutes to have them all programmed to the truck, thank you so much for the video.
You're Welcome! Glad it helped
Took three tries but it finally worked. THANKS!!!!!
You're Welcome!
I just bought my fob from autozone and I’ve tried it like 5 different times and I can’t get it to work
Perfect Instructions! Have 2 working FOBS for $25. No more fumbling for my keys in the dark to unlock my Silverado.
Glad it helped!
Old fab stopped working and this fixed it perfectly fine. Thank you for sharing, you are awesome 👌
You're Welcome! Glad it helped
I watched another video that said to open and close the door and then turn the key on after you do the first steps
I did that and it worked.
Thank god for your instructions cause I couldn’t figure it out with reading the instructions lol
Glad it helped!
Very easy and it worked. I paid 7$ for the one I programmed to my 2004 Chevy 1500
Glad it helped!
Can’t believe spend $20 on new remote controls is working tks I appreciate
Glad it helped!
2007 Chevy Classic. Worked perfect. TYVM.
You're Welcome! Glad it helped!
Thank you so much this worked first time, just bought my duramax and now have 2 working remote for $20 dollars!
You're Welcome! Glad it helped
I have an 02 Silverado and it’s not working for some reason?
Absolutely Excellent Video Brother! ❤👍🏼
Thank You!!!!!
You're Welcome!
Worked like a charm on my 2004 Silverado. Thanks for the info!!
You're Welcome! Glad it helped
Couldn't have been more clear..... 🎉
Glad it helped
My 2000 Chevy 1500 pickup is on it's 3 set of fobs, unfortunately remembering how to program the new fobs did not work and the instructions from the manual that came with the truck does not work. The DIY video worked - it was perfect. Thanks
You're Welcome! Glad it helped
You saved me a lot of work and frustration. Thanks a lot
You're Welcome!
Thanks for the simple and easy to understand instructions!! Got some new fobs for my 04 suburban, and it worked great.
You're Welcome! Glad it helped
Just did this on a 2005 Silverado,worked like a charm.Thank you
You're Welcome!
Thank you so much! Your directions made it so easy for me to follow. Success!
You're Welcome! Glad it helped
Thanks for the video! Got new fobs for my 2002 Chev 2500. Worked great!
You're welcome!
Wow, very easy and straight forward. Thank you!
You're Welcome!
Thank you. You saved me money from having to go to the dealership
You're Welcome!
I had one of my original fobs that came with my truck when new that lost its programing on my GMC Sierra. The fob battery got so weak it would not lock or unlock the doors and the emergency (RED) button did not work. I replaced the battery with a new one but the fob still did not work so I got in the truck and ran through these steps and with the same new battery the fob started working again. Thanks !
mine i do it but like right after i put it in the cycle it immediately cycles again after and it doesnt program the key
I had to do it 3x then it worked. Keep trying.
Not having much luck got it into programming mode though. 2007 Silverado classic
Readings hard
Most simple video ever perfect instruction very satisfied
Thanks!
Worked perfectly! Mega thanks!!!
You're welcome!
Thanks, worked perfectly for my 2005 Silverado
You're Welcome!
Great job explaining how to program my fob, THANK YOU :) 😃
You're Welcome!
Thank you this work and it was very helpful and easy to do
You're Welcome!
Thanks for the video. That was too easy. Too easy.
You're Welcome!
Great quick video tutorial
Thanks!
Thanks! I was missing the step to do the old and new at the same time. Now I know where I went wrong. :)
Glad it helped
Thank you sir! Clear and Concise!
You're Welcome! Glad it helped
Perfect! Fixed Both! Thanks soo much!
You're Welcome!
Thank you very much for the helpful tutorial.
You're Welcome!
Thank a lot. This work great
You're Welcome! Glad it helped
Thank you for the video. Worked perfectly
You're Welcome!
Ultimate cheat code
Worked perfectly on a 2005 hummer h2. Thank you
Nice! You're Welcome!
I have a 2000 Chevy Silverado 1500 LS. When I press the unlock and lock on driver side door it doesn't unlock or lock the passenger side door. What do you think that might be?
how did you fix it?
Thanks! Worked like a charm.👍👍👍
You're welcome! Glad it helped
Thanks so much. I did for my car and working perfect.
You're Welcome!
Thanks! I notice my '06 Silverado cycles *twice* when entering programming mode, and only accepts one fob.
Thanks very helpful
You're Welcome! Glad it helped
Thanks bro I appreciate the tutorial it’s working now
You're Welcome!
Thank you, much appreciated, worked with my escalade 2005
You're Welcome!
Awesome, thanks for the video!!! Worked perfectly on my 2000 silverado 1500
You're welcome!
Perfect for my 2007 Silverado HD Classic
I have a 2006 Silverado duramax that I bought used. How do I know if I can use remote access?
Great vid‼ Well explained 👍🏽
Thanks!
Thanks, just completed this. Easy quick to the point video.
You're Welcome! Glad it helped
Right on 💯💯💪
You’re the man!!! Thanks buddy 🤙🏻
You're Welcome! Glad it helped
Thank you much I had to replace my key fob after the keys were stolen
You're Welcome! Glad it helped
It worked for me, thank you!!
You're welcome!
thanks for this amazing video.
You're welcome!
Got it…
Piece of cake, thank you very much.
You're Welcome!
thank you very much your video helped me
You're Welcome!
Greatly appreciate this.
Glad it helped!
Thank you
You're Welcome!
My drivers switch doesn’t work
Badass video thank you!!
You're Welcome!
Where did you get the extra key fob and what dose it mean when your unlock button don’t work but your lock one does
This was an old key fob that we already had. The button pads can wear out over time and some buttons may stop working - I would try replacing the button pad - replacements can be found online.
Do you have to have the old fob to do the first cycle like you did here? I had one working fob for my truck, and it quit working. I tried a new battery and it did not fix it. So as of now, I have no fob.
no - you do not need the old fob
Thanks worked great. Thank you
You're Welcome!
Awesome video thanks
You're Welcome!
I have key fobs left from vehicles that I've junked. Will this work for a used fob as well as a new one?
yes, as long as you are using the correct used fob
I did this with my trailblazer and the first one was successful but he second never cycled the door locks and wasn't programmed. Any advice?
it sounds like there may be just be an issue with the second remote
Thank you brother for your help
You're Welcome!
This might be a dumb question but can this work if you have an aftermarket alarm system?
it can still work but depending on the alarm system it may cause issues as well
Mine locks but it wont unlock i tired this and its still doing the same thing do you know why it does that?
Bad fob button? I know auto stores used to have a fob tester where you stood in front, pressed your fob buttons to see if the test light indicated.
Ever figure out the issue ?
I was able to program my key, tested it sitting inside but as soon as I get out it won’t work
How can I do it without the push button lock ?
if you do not have power locks then the vehicle will not have the factory remote option installed
Thank you so much!!!!!!!
You're Welcome!
Thanks bro I really appreciate it 👍
You're Welcome!
I tried this for my tbss it didn’t work wat would u recommend
My original fob will lock the doors but not unlock them now. Does anybody know why that could be?
Thank you sir!
You're Welcome!
Gracias 👍👍👍
You're Welcome!
Will this work for a 2007 Silverado 1500 classic?
yes it should
My Silverado does the cycle twice not once and won’t program. It’ll unlock and lock twice one I release the unlock bottom
Will this procedure program my 2016 GMC SIERRA
no
When I bought the truck it didn't have a key fob so can I buy one and program it without having the original fob?
Yes - as long as the vehicle has the factory remote option
What if my existing key fob doesn’t work?
Just purchased 06 tahoe, keys came with no key fob. Can I still program a couple new ones?
yes
This procedure didn't work for me with a new remote what do I do now?
Why my key fob in 2006 Silverado is not working when is next to another Chevy car
What if you don’t already have a key fob? Since you have to have 2 for it to work?
You don't need existing fobs for this to work - as long as the vehicle has the factory remote option
easy thanks to you
Glad it helped
GMC Sierra 2001 with manual transmission and no power windows and didn't work. Works fine on our 2004 suburban....
Sounds like the 2001 does not have the factory remote option since there are no power windows
HELP...Sync to my door locks but not to my alarm any suggestions..
2002 Silverado 1500 hd
Hello
Try to follow the procedure but as soon as I hit the ignition two times and release the open button, few seconds later, mine gets out of the programming time by honking two times
Mine does this as well. Did you ever figure it out?
Will this also work for a 2005 Chevy Express Van ? Thank you!
No - unfortunately there is no manual way to program fobs to a 2005 Express. You will need an automotive locksmith or dealership
Will this process also delete all previously programmed fobs? I had one stolen and want to delete it from my system if possible.
Yes it will
I don't have power switch locks how do I program.
if you do not have electric locks then you will not have the factory remote option
Very good
Thanks!