I was wondering what your background is. Normally, I would have thrown my TV out that went bad but thanks to your videos I was able to fix my TV. Thank You!!!!
Hey Tampatec just wanted to give thanks for the I go on te vizio phone number I contacted them and yes my tv is still under warranty they will b here next week to fix. Thanks so much. Keep up the good work.
Hi Tampatec,i watched two video's of yours tv repair for beginners and easy way how to test caps diodes etc etc, found them very informative and interesting.I need to send you a few pictures of my power supply board and a component with text and stuff how can i do that. then i can explain my problem with my television.thank you.
thank you for ur time to show us. on how to repair our tv. love ur video ever sense I am been watching ur video I want to learn how to repair then....nice work bro....
This is one of your better videos. I like the way you go through and test one thing at a time. So cap's and batteries are more a like than I thought. From what you said "Cap's can go bad just over time". So it's kind of like flash light batteries sitting on a shelf. You go buy them and they are already dead. So have you ever bought a new cap. and it be bad ? You said you thought it was a bad transformer on another board. And it was best to replace both. Is that because you think the board with the transformer may be bad as well ? Sorry if this sounds silly or what, but all this is new to me.
yes when in doubt change it, inverters have transformers that go bad commonly and take out other parts. you should check out The super capacitors they are the Future!
Makes sense. Sometimes what one sees is the effect, not the cause of the problem. I worked on cars for 35 years, and I've seen one thing that failed only to find out some other component would get cooked too. I can't tell you how many times I have seen someone replace a burnt out component only to have it fry the moment they turned the key because they went no further than what was in front of them. Example: GM has a control module that controls the fan speed to the HVAC system in the car, and when the fan starts to draw a high amount of resistance due to wear on the brushes and armature in the fan motor, it burns out the control module first before it stops working altogether. The fan still works like normal, but because it draws more amperage than the module can tolerate, the module burns out, and the fan stops working. Many techs will replace the burnt out module, the fan works again, but a week later the new module is fried again if not right then as soon as the tech turns the key depending on the amperage draw. Sometimes it takes replacing multiple parts to repair problems. Thanks for the presentation.
Thanks for the information and I hope you continue to prosper.Quick question,I have two tv. A 40inch Samsung that bumped against the wall and have vertical lines no pictures, and a 50 inch RCA that had virtical lines due to a cereal bowl. I'll I have to do is replace the panel right?
I've watched a few of your videos here. They are very informative. Thanks for doing this. I have an LG 50" Plasma model 50PN6500-UA.BUSLLHR. It's 2.5 years old. For the most part the TV works fine but after it warms up, if you play with the volume or mute buttons on the remote it shuts off for a couple of minutes then comes back on. I called the LG tech support line and they said they have not heard of this exact problem before. Have you ever run into this problem. What board do you think will need to be replaced?
thanks for all of your vids you helped me get my TCL running again. however i still need help and i hope you can guide me. i have a TCL 40fs3800 that is 1 year old and i just replaced the main board in it. it doesn't work correctly in that the picture is upside down now fuzzy and snowy. the colors are messed up also. can you help me out? this originally had a solid red light and no start up from manual button or remote, i shined a flashlight on the screen and saw nothing. then took it apart looking for obvious problems such as caps and burn outs. nothing... so it didn't take but about two seconds to see the power supply and main were all one so i went and purchased a used one online for $15 and replaced it. now it turns on but video is not right. got any ideas?
Hey do you think ita possible for you to tell me what part is the "power supply" in a sylvania LC407SS1? I need to purchase a new one due to a power surge in the house. But I do not know which part is the actual power supply. Thanks!
Hey Paul. i just ordered and replaced the powerboard (sony a-1660-720-B ip1) from shopjimmy.com.) it's for a Sony KDL-40v 5100. before, there was no power on light. now, i get a green light, but nothing on the screen (at all). what video should i watch to get to step #2? i can call, but i thought i'd try this first. thanks
Hello Tampatec. thanks for your videos. they are full of information not just crap. My neighbors TV got broken instantly while they are watching. I checked out and there is no sign of living. Its a 47pfl.... Philips tv. It has a dps 298 4 amps power board on it. I checked out the output voltages. All of them is showing 0 or very close to 0. I checked all diodes. Two of the diodes are shorted. They are parallely connected. I thought may be there is another connection that makes them short. Removed them from circuit measured them again, 1 of them is completely short other is sometimes short, sometimes 200. They are labeled as SB260. I don't have any, also in my country there is no. I think they are 2 amps 60v diodes. I have two questions 1. which diode can I replace instead of these? 2. Do you think that replacing will solve the problem? Ps: I don't have anything to measure capacitors but they look well (no pop, burn etc.).
+Thomas Storm got the regulator, installed today, you the man. may i donate to your support when it sells? PM me. thanks. funny story for all to learn. i fired this up. went to program in the AIR as i dont have cable. as it was programming i installed the back. a minute later smoked pored out the back. big time. SHUT DOWN. removed the cover fired up again all good. POINT IS, always clean the boards after reworking.
, I just got an LG 42cs560 it has no picture vertical lines and no sound... Hmmmm any suggestions? I was leaning toward a tcon board, but not sure if that will help sound too. Thank you
First, I wish a Happy New Year to you. Second, Great job buddy. Third, I've a Toshiba Ragza 55" that I bought on 2006 as a Christmas gift to my parents. They are Not used it too much. Recently, they tried to turn it on, but there is No picture, No sound at all; however, the power supply is working fine and still flashing. I do not know what is the issue. Can you help me, please? Thank you so much.
since you are into the repairs do the manufacturers build these units to fail. Seems to me a lot of board have bad capacitors. Where can i learn to troubleshoot and repair these units?
Hey man great videos! I have a Samsung LE32R88BD, I've had it for about 5 years and recently the picture went and all I have is sound. The backlight is still working as I can see it and i've tested the power board and it seems okay, with no bulging capacitors. Any other ideas what could be the problem? Thanks
Hi Tampatec. first off thanks for the vids. i have watched all of them over time. i also refresh when i have an issue like now. The Fizio board you are working on here is from a vo47l, or close to it. It looks the exact same. Question. all caps are replaced. the cap blown in the vid must be a common problem. I have stanby volts and less than 1 volt going through the 24v lines, 0 v turned off. it comes out of standby but does nothing else. the relay is clicking. i tested the bridge rect and it tests good. what video do you recommend for further testing or what parts would you test next? TIA thanks stormy, student extraordinaire
i have a vizio e371vl that isn't getting any power due to a power surge. i have replaced the power board with a new one i purchased off of ebay and still no power. any ideas? or am i just screwed?
how can i trouble shoot my sanyo 42" plasma? half the screen is out. i think it may be the T-Con board but i am not sure. do you know how i can test the T-Con board?
I'm a "Green" beginner ... but I have a "LG" LED flat screen TV and I'm wondering about fixing it should it happen to need fixing? Have you done repairs on "LG" products?
LG37LC2D powers on, have the Hopper hdmi hooked in- then after 10 secs it filters through all input sources and then shuts off , turns back on by itself and will do this until I unplug it. Can you recommend anything?
My Samsung flat screen tv's picture has a shadow that is very appearent when using the station guide. When you play a dvd it's nice and clear. I've already replaced the cable and the cable box itself. I think it's a faulty cable connection port. Have you ever heard of one going bad if so what would be the fix.
I have a Samsung 32" (2008) LN32A450C1D model that has lost color. Regardless of being on cable or antenna the picture appears in a negative view. The images defined & sound is good. The TV indicates it has a weak signal, however it had been working just fine. Other TVs have been used to validate the signal with no problems. It appears to point to the Ant in portion of the TV as the problem. What do you suggest? Thx in advance
@tampatec hi I have TV that won't turn on it's a coby tftv3925 first I think it was the power supply board so I bought one on eBay, I put it in there but TV still won't turn on. So what's wrong with my TV???
Tampatec, i would appreciacte your help. I found a kdl-40vl130 next to my buildings trash bin. It looks like its in good condition. I powered it up, the green light stays on. The back light turns on. The lcd doesn't look damaged But there is no video and no audio. Could it be the main board? Thanks in advance.
hey Tampatec! i was wondering if you could give me a tip about a problem i m having with my samsung lcd tv. i ve watched all your videos but i think i dont have a capacity issue. the model of the tv is samsung le37c550j1w xzt. it simply doesnt turn on. sometimes the red light is blinking when i push the button from the remote control (there are no buttons on the tv) sometimes it doesnt do nothing.so i opened the back and everything seemed normal.what could it be? p.s.: i live in rome italy no us
Hi Tampatec, I hope you could find a second to help me... I'm trying to fix panasonic tc p50st30 it won't turn on. The led light is on but doesn't blink so I took back panel off and there isn't visible damages I mean nothing burn, all capacitors are look good but I did not test them since I don't have tester. What could it be? Thank you!
Hey Tampatec I have a 55 inch vizio and it just stop working. I ordered a power supply and replaced it and still nothing. No power at all. I check visually the caps but can't see any. Damage what else should I do this tv is no more than 3 months old. It sucks.
I have a sylvania 6727 FDE triple combo, it keeps jumping into this mode where there is a black rectangular small black box in middle of screen shows BF -0.22 with four number 2's in each of the four corners of screen, knocks out the sound but leaves the channel and picture on screen
Ihave watched alot of your vids my watched a vid ti chk va and vs they read twice what they should on ac should i be on dc i have sound no pic on a plasma tv i need help please John
Hey man! My mixtape isn't released yet, but If you click on my channel you can see covers. I have 3 posted so far. My rap god cover was a little off due to asthma complications, but world wide choppers was a lot better, and no love was damn good if I do say so myself.
I keep havig trouble getting to post on the tv i,ve ck some thinks no help can you guide me a little no pic has sound can change sound and channels i think it the y or x and there inner connected so i need to ck the y board this is a insignia ns51p680a12 51 in plasma
If you say the board needs to be replaced because it has bad trace lines why keep testing. On replacing board do you have to replace all parts to new board?
i was wondering if u could help me with my vizio 32in LCD i plug it in and there is no light at all on it took the back off and checked the power going in to it but im lost from there can u please help me..
I Have A TV My Neighbor Let Me Have & Wen I Plug It In I Get A Standby Light But No Picture Or Sound. So Could It Be A Logic Board Or TCON Board Or An Inverter Board?
I have a lg42le5400uc. My baby sprayed it with water and one of the ead's went bad (tjick grey line on screen). I replace both sides but was rushing and switched by mistake witch caused one to burn. I just replaced both again but now I have no picture at all. It turns on but no LG ico, etc. Should I replace the driver boards or the tcon board first? Thanks in advance if you can assist.
I had unplugged the T CON and it still turn off on itself. Power board visually has no bad capacitors. So is there a way to check the main logic board to confirm it causes the problem?
We had lightning, it turned off our Insignia TV Ns-32L120A13, The cable box works, the TV won't turn on. I tried different power outlets. Looking at your video it seems like a power supply problem. I took the back off. I did not see any burnt parts. Is there a reset button or fuse on this unit? thanks, Bob
Bobby Rio leave power cord unplug for 5 minutes to reset and test tv, next check fuse on power board near power-cord. check bridge rectifier too. hope this helps
I have a LG model PDP60R30110 plasma TV it starts off with a black screen then goes white to red but it looks like the screen is melting. Do you know what could be wrong with this TV a word to start the troubleshooting?
Hi i have a luxor tv and it is just totally unresponsive . It turns on fine but when its on says no signal retune etc . If i use any button on the tv remote it does nothing at all . If i press source on the tv it just comes up with a menu only comtaining the option ( tv ) no hdmi 1 hdmi 2 etc etc . Cant do anything on the tv at all so obv somethin weird going on . The tv is preyty new too in great shape . Can i get into the service menu ? Is it worth it too ? Or is this a bad board ?? Main power board av board ?? What would i replace . Thanks for any help guys the model no is ... luxor 46ccflt2
Hi i have a vizio model M3D650SV the tv will turn on and stay on for anywere from ten minutes to twenty five minutes picture and sound work fine after it shuts off on its own you wait 10 seconds hit the power button and the tv will come back on and play for another 10 to 25 min wait 10 seconds and you can turn back on again and you can go all day doing this power supply in is ok tested that even moved to another power outlet i opened the back of tv nothing looks bad no bunt smell no burn marks what shoud i look for next
Hi Tampatec IM A FIRST TIMER WE PLUGGED THE TV UP AND TRIED TO WATCH NETFLIXZ AND SEE IF WE COULD USE USB CORD OR BLUETOOTH TO WATCH FROM A IPHONE 7.THIS TV WAS FOUND AND GIVEN TO US. TWO FEMALES WHO KNOW NOTHING ABOUT T.V'S LLS I KNOW. BUT MY QUESTION IS THE TV WILL TURN ON BUT NO SOUND OR PICTURE POPS UP AND NO OPTIONS COME UP EITHER... WHAT COULD WE DO TO FIX THIS TV ITS A VIZIO VP422 HDTV10A MODEL S42 AX-YD05?
good day Tampatec, Im new to this field...i have a CRT TV which is not working, i know that there is a power coming in....but the momenet you switch it on, it stays in a standby mode (RED LED)..it doesnt show anything ..just black screen! just want to ask where to start checking the board and what is the possible problem of this TV...thanks more power
unplug powercord on tv then Carefully discharge flyback suction cup, i fixed quite of few crt Tvs check Fuses then check diodes and any transistors on metal heatsinks, legs should read .3 to .7 one way & OL reversed in diode mode on meter. check for 5 dc logic volts on main chip. Good luck! 8^)
Hi Tampatec, I wanted to ask about a samsung plasma tv that turns on...screen flashes on for about 2 seconds and then goes blank. sorry if this is the wrong place to ask
Hi I have a Samsung Surround DVD player Model HT-H5500K, Model code HT-H5500K/XA. This is the only appliance that I Earthed until one day a Lighting Storm struck, at the time the TV and DSTV decoder were also on but nothing happened to them. When the lighting struck hit us it tripped the earth leakage and that's the last time my surround system worked. After inspecting it inside I cannot see any burned damage or smell anything that has burned, yet a company that I took it to for repairs tells me it is unrepairable and I don't believe them. Can you advise?
I am using toshiba regza 42wl66e model, n have difficulty with searching for channels, I have change the aerial connector cable to connect to my tv but when I search for channels I can only find a couple. When I use the same cable n connect to another tv, I did not have any problem searching for channels. The setting use to search for channels both in auto and manually are the same for both tv, but my 42wl66e tv model are having problem finding channels. Please help.. how I explain well enough for u to understand. Thanks
some tv tuners are better than others, use amplifier but sometimes loose connections on connectors can cause weak signal and bad solder connections on tv turner board can weaken signal, (make sure you use rg6 cable)
whent u fix and older tv u need to discharg some electricity remaining by the back side of the screen ,. My question is do u need to do the same whent u fix and flat screen . I m a beginner and i want to know that help me pls
hello ,I have a Magnavox 2010 year model #32MD350B/F7 ,if i plug it up the tv powers on says didgital tv then starts changing colors,none of my buttons work.either.Any help? thanks
Quick question... If a capacitor it suppose to measure 47 uF and my meter measures like almost 2,000 uF from that capacitor instead 47 uF does that mean that the capacitor is bad as well? Reason for my question is because it already happened to me when I was measuring my ps3 power supply board and all the capacitors measured pretty closed according to each range in each one of them but except the only one that I'm mentioning above. I'll wait for your response Thanks in advance Regards
take cap out of circuit and read it, check meter settings and put in fresh batteries in meter too then check it again, but when in doubt change it out. ps3 usually main board goes out first.
I have a Toshiba 40rv52u it comes on but it seems to be suck in minu mode can't get it off the screen is used the remote it doesn't work it turns the tv off and on but the enter button don't work
My name is Kim, I have a Sony Triniton XBR 42 inch massive tv. the problem I am having is the focus is blurry. I tried to adjust it in the menu but doesn't help, what do you think could be the problem?
Kim Richards in the back of tv there's adjustment dial for flyback transformer focus and crt screen B+ voltage be-careful not to dial b+ cause picture get either darker or brighter with lines, i think focus dial is labeled on transformer. Sub if this helps 8^)
My name is ART. I have a Sylvania 6727 FDE CRT TV. I hope you can assist me with this bit of a dinosaur. When I attempt to turn on the set it clicks once and does not come on. This is a TV that we would love to keep going as it also has a DVD player and VHS player. I was given this TV when I acquired a property about a year ago. It has worked until recently but was very slow coming on and getting a Blurr-Free picture.. It has been used outdoors since its purchase. We were told it was an "outdoor unit"? It is mounted up high under a covered roof and it is not subject to direct water damage. When I do use my remote to turn on the TV I see a very quick little green lite then immediately it turns red then immediately shuts down. I do NOT have any manuals whatsoever but would like to obtain both the repair manual and the owners manual. Would you propose that my issue is a Power Issue? Could you also direct me to the manuals? Regards, ART
LG 46LD550-UB Has green shadow on left side of screen or picture about 15". This happened after I put a used main board from EBay. before put the main board in I had nothing. after I put main board TV played for a few minuets then the shadow came on.
Hi. I have a Samsung Plasma TV (PN60E550) that is giving sound but no picture. The problem has slowly gotten worse and worse. For a while after several attempts the picture would finally come on (and often while on and working the red light would blink), then it took a lot more attempts and now it just won't generate a picture at all. I watched some of your videos and opened up the TV. None of the capacitors appears to be buldging and there is no obvious damage or corrosion anywhere. So what is the next step? I don't want to remove all of the components and test every single thing .. how do we narrow the problem down to one component from this point? Any help is very much appreciated!
I just watched your samsung plasma tv video and I wanted to add that I tried unplugging the y board and checking to see if the tv screen would come one. It did not. So that means the issue is not the Y sus board right? I really don't know anything about this kind of stuff total noob so I don't want to dissassemble these boards to test / replace all the caps. my soldering skills leave a lot to be desired. Please let me know what you'd suggest from here. thanks
I have a Sony Bravia Midel Number KDS553000, Serial Number 8014995. The problem that I'm having is that I have a picture, but it is dim during daylight where I can barely see the images. At night the images are more visible, but there seems to be more of a bluish color. Any help in diagnosong the problem will be appreciated. I had just recently changed the lamp.
I have a 32 inch Sharp Model# LC-32SB23U,it comes on pitcher and sound after 30 Sec pitcher goes out sound stays on.I resett it and still does the same thing.
We have an Insignia 42" LCD TV. Model NS-L42Q-10A. We are having trouble with the picture being too light. We have adjusted the picture to try to correct it with no success. Please help.
My screen looks like it has smashed on the inside,by grabbing the t.v & moving it it has damaged the picture with lines and spots on inside screen where grabbed...Can this be fixed and cost?
Hi, I have a Toshiba LCD TV model no.40CV700E. My tv is turn on but there's no picture or sound. there is no backlight too. Can you help me to trouble shoot whats wrong with it. Hope you can help. Thank You.
I have a Samsung LE40R88BD with the black screen and clicking fault. I have replaced two caps on the power board that leaked the black fluid but the fault continues. What would you suggest I do next, bro? P.S. Love the vids and have been subscribed for a good couple of years and have shown support by liking vids and recommending friends subscribe too. Keep it up, bro! =)
50" LCD TV went off when there was a power outage ( plugged in to a surge protector ) and now will not power back on. Can you troubleshoot this ? Thanks.
I purchased an E-tec 40 in. tv 14 months ago and the sound is there, I can change stations, but there is no picture (screen is black). What is the problem. Can I repair it myself?
did i blow a Capacitor, if i replace lamp and picture does not come back on ?...have blinking lights on front of my samsung projection tv..says stand by/temp...
Hi I have a mitsubishi wd73640 we have changed everything light, boards and when we power it on it just blinks yellow which says that the door is open .can you help?
LCD monitor is switching on but no picture is appearing.the remote is unable to switch off the monitor. It is able to auto tune but no picture appears. What is the problem? Maybe the popping sounds before TV got into repair mode has some capacitor problem! What is to be done?
I like how you describe in detail what are the most common things that will go bad in a tv. I would like to learn more on how to fix tv's.
I was wondering what your background is. Normally, I would have thrown my TV out that went bad but thanks to your videos I was able to fix my TV. Thank You!!!!
Hey Tampatec just wanted to give thanks for the I go on te vizio phone number I contacted them and yes my tv is still under warranty they will b here next week to fix. Thanks so much. Keep up the good work.
I'm an amateur so this helped a lot. Thank you, TampaTec!
Hey Tampatec,
Thanks for doing this video. I'm still learning the basics and your video helps to clear up some of the fog.
Regards, Tom
Hi Tampatec,i watched two video's of yours tv repair for beginners and easy way how to test caps diodes etc etc, found them very informative and interesting.I need to send you a few pictures of my power supply board and a component with text and stuff how can i do that. then i can explain my problem with my television.thank you.
Crystal clear info.
THANKS!
thank you for ur time to show us. on how to repair our tv. love ur video ever sense I am been watching ur video I want to learn how to repair then....nice work bro....
This is one of your better videos. I like the way you go through and test one thing at a time. So cap's and batteries are more a like than I thought. From what you said "Cap's can go bad just over time". So it's kind of like flash light batteries sitting on a shelf. You go buy them and they are already dead. So have you ever bought a new cap. and it be bad ? You said you thought it was a bad transformer on another board. And it was best to replace both. Is that because you think the board with the transformer may be bad as well ? Sorry if this sounds silly or what, but all this is new to me.
yes when in doubt change it, inverters have transformers that go bad commonly and take out other parts. you should check out The super capacitors they are the Future!
Makes sense. Sometimes what one sees is the effect, not the cause of the problem. I worked on cars for 35 years, and I've seen one thing that failed only to find out some other component would get cooked too.
I can't tell you how many times I have seen someone replace a burnt out component only to have it fry the moment they turned the key because they went no further than what was in front of them.
Example: GM has a control module that controls the fan speed to the HVAC system in the car, and when the fan starts to draw a high amount of resistance due to wear on the brushes and armature in the fan motor, it burns out the control module first before it stops working altogether. The fan still works like normal, but because it draws more amperage than the module can tolerate, the module burns out, and the fan stops working.
Many techs will replace the burnt out module, the fan works again, but a week later the new module is fried again if not right then as soon as the tech turns the key depending on the amperage draw. Sometimes it takes replacing multiple parts to repair problems.
Thanks for the presentation.
thanks man.well explained for beginners.
Incredibly Informative thank you for posting this, I learned more from this video than the 20 I have seen so far. thumbs up and sub
Thanks for the information and I hope you continue to prosper.Quick question,I have two tv. A 40inch Samsung that bumped against the wall and have vertical lines no pictures, and a 50 inch RCA that had virtical lines due to a cereal bowl. I'll I have to do is replace the panel right?
Very instructive, thanks a lot !!
I appreciate your technical expertise for showing how to repair tv but would you let me know where to find part for replacement. Thanks😜👍
I learned something 👍
Very good video, mon!
I've watched a few of your videos here. They are very informative. Thanks for doing this. I have an LG 50" Plasma model 50PN6500-UA.BUSLLHR. It's 2.5 years old. For the most part the TV works fine but after it warms up, if you play with the volume or mute buttons on the remote it shuts off for a couple of minutes then comes back on. I called the LG tech support line and they said they have not heard of this exact problem before. Have you ever run into this problem. What board do you think will need to be replaced?
thanks for all of your vids you helped me get my TCL running again. however i still need help and i hope you can guide me. i have a TCL 40fs3800 that is 1 year old and i just replaced the main board in it. it doesn't work correctly in that the picture is upside down now fuzzy and snowy. the colors are messed up also. can you help me out?
this originally had a solid red light and no start up from manual button or remote, i shined a flashlight on the screen and saw nothing. then took it apart looking for obvious problems such as caps and burn outs. nothing... so it didn't take but about two seconds to see the power supply and main were all one so i went and purchased a used one online for $15 and replaced it. now it turns on but video is not right. got any ideas?
Hey do you think ita possible for you to tell me what part is the "power supply" in a sylvania LC407SS1? I need to purchase a new one due to a power surge in the house. But I do not know which part is the actual power supply. Thanks!
Hey Paul. i just ordered and replaced the powerboard (sony a-1660-720-B ip1) from shopjimmy.com.) it's for a Sony KDL-40v 5100. before, there was no power on light. now, i get a green light, but nothing on the screen (at all). what video should i watch to get to step #2? i can call, but i thought i'd try this first. thanks
Hello Tampatec. thanks for your videos. they are full of information not just crap. My neighbors TV got broken instantly while they are watching. I checked out and there is no sign of living. Its a 47pfl.... Philips tv. It has a dps 298 4 amps power board on it. I checked out the output voltages. All of them is showing 0 or very close to 0. I checked all diodes. Two of the diodes are shorted. They are parallely connected. I thought may be there is another connection that makes them short. Removed them from circuit measured them again, 1 of them is completely short other is sometimes short, sometimes 200. They are labeled as SB260. I don't have any, also in my country there is no. I think they are 2 amps 60v diodes. I have two questions
1. which diode can I replace instead of these?
2. Do you think that replacing will solve the problem?
Ps: I don't have anything to measure capacitors but they look well (no pop, burn etc.).
Will do. Thanks Tampatec!
Good morning sir. Love ur channel. Can I used my auto range to find bad capacitors?
thanks on the voltage reg. it seemed a bit flakey so I looked for one. Digi has none. Poland is the closest place.
+Thomas Storm got the regulator, installed today, you the man. may i donate to your support when it sells? PM me. thanks. funny story for all to learn. i fired this up. went to program in the AIR as i dont have cable. as it was programming i installed the back. a minute later smoked pored out the back. big time. SHUT DOWN. removed the cover fired up again all good. POINT IS, always clean the boards after reworking.
nice tutorial. I began early on fixing vizio plasma. no training. this would have been useful then :-)
Do you know if your capacitance test is enough or you should also use an ESR meter to confirm a bad cap ?
thanks
How can you find out what the blinking light codes are for your TV?
, I just got an LG 42cs560 it has no picture vertical lines and no sound... Hmmmm any suggestions? I was leaning toward a tcon board, but not sure if that will help sound too. Thank you
First, I wish a Happy New Year to you. Second, Great job buddy. Third, I've a Toshiba Ragza 55" that I bought on 2006 as a Christmas gift to my parents. They are Not used it too much. Recently, they tried to turn it on, but there is No picture, No sound at all; however, the power supply is working fine and still flashing. I do not know what is the issue. Can you help me, please? Thank you so much.
since you are into the repairs do the manufacturers build these units to fail. Seems to me a lot of board have bad capacitors. Where can i learn to troubleshoot and repair these units?
Hey man great videos! I have a Samsung LE32R88BD, I've had it for about 5 years and recently the picture went and all I have is sound. The backlight is still working as I can see it and i've tested the power board and it seems okay, with no bulging capacitors. Any other ideas what could be the problem? Thanks
Hi Tampatec. first off thanks for the vids. i have watched all of them over time. i also refresh when i have an issue like now. The Fizio board you are working on here is from a vo47l, or close to it. It looks the exact same. Question. all caps are replaced. the cap blown in the vid must be a common problem. I have stanby volts and less than 1 volt going through the 24v lines, 0 v turned off. it comes out of standby but does nothing else. the relay is clicking.
i tested the bridge rect and it tests good. what video do you recommend for further testing or what parts would you test next?
TIA thanks stormy, student extraordinaire
Check voltage regulator.
Thomas Storm
Thank you for making this video
i have a vizio e371vl that isn't getting any power due to a power surge. i have replaced the power board with a new one i purchased off of ebay and still no power. any ideas? or am i just screwed?
how can i trouble shoot my sanyo 42" plasma? half the screen is out. i think it may be the T-Con board but i am not sure. do you know how i can test the T-Con board?
I'm a "Green" beginner ... but I have a "LG" LED flat screen TV and I'm wondering about fixing it should it happen to need fixing? Have you done repairs on "LG" products?
LG37LC2D powers on, have the Hopper hdmi hooked in- then after 10 secs it filters through all input sources and then shuts off , turns back on by itself and will do this until I unplug it. Can you recommend anything?
My Samsung flat screen tv's picture has a shadow that is very appearent when using the station guide. When you play a dvd it's nice and clear. I've already replaced the cable and the cable box itself. I think it's a faulty cable connection port. Have you ever heard of one going bad if so what would be the fix.
Good video,but need more light.Thanx
I have a Samsung 32" (2008) LN32A450C1D model that has lost color. Regardless of being on cable or antenna the picture appears in a negative view. The images defined & sound is good. The TV indicates it has a weak signal, however it had been working just fine. Other TVs have been used to validate the signal with no problems. It appears to point to the Ant in portion of the TV as the problem. What do you suggest? Thx in advance
@tampatec hi I have TV that won't turn on it's a coby tftv3925 first I think it was the power supply board so I bought one on eBay, I put it in there but TV still won't turn on. So what's wrong with my TV???
I have a 5 dollar multimeter from harbor freight, can I use that to test TV's?
If it works then yes, those usually don't last long though
Tampatec, i would appreciacte your help. I found a kdl-40vl130 next to my buildings trash bin. It looks like its in good condition. I powered it up, the green light stays on. The back light turns on. The lcd doesn't look damaged But there is no video and no audio. Could it be the main board? Thanks in advance.
David of the Meadow
hey Tampatec! i was wondering if you could give me a tip about a problem i m having with my samsung lcd tv. i ve watched all your videos but i think i dont have a capacity issue. the model of the tv is samsung le37c550j1w xzt. it simply doesnt turn on. sometimes the red light is blinking when i push the button from the remote control (there are no buttons on the tv) sometimes it doesnt do nothing.so i opened the back and everything seemed normal.what could it be? p.s.: i live in rome italy no us
Hi Tampatec, I hope you could find a second to help me... I'm trying to fix panasonic tc p50st30 it won't turn on. The led light is on but doesn't blink so I took back panel off and there isn't visible damages I mean nothing burn, all capacitors are look good but I did not test them since I don't have tester. What could it be? Thank you!
Thanks will do as for the sub. Already did. Thanks
Hey Tampatec I have a 55 inch vizio and it just stop working. I ordered a power supply and replaced it and still nothing. No power at all. I check visually the caps but can't see any. Damage what else should I do this tv is no more than 3 months old. It sucks.
I have a sylvania 6727 FDE triple combo, it keeps jumping into this mode where there is a black rectangular small black box in middle of screen shows BF -0.22 with four number 2's in each of the four corners of screen, knocks out the sound but leaves the channel and picture on screen
Ihave watched alot of your vids my watched a vid ti chk va and vs they read twice what they should on ac should i be on dc i have sound no pic on a plasma tv i need help please John
I need a TV repair for advanced people with an electronics background.
nice tech
***** from one nerd (smart guy) to another dude u got skills
Hey man! My mixtape isn't released yet, but If you click on my channel you can see covers. I have 3 posted so far. My rap god cover was a little off due to asthma complications, but world wide choppers was a lot better, and no love was damn good if I do say so myself.
I keep havig trouble getting to post on the tv i,ve ck some thinks no help can you guide me a little no pic has sound can change sound and channels i think it the y or x and there inner connected so i need to ck the y board this is a insignia ns51p680a12 51 in plasma
If you say the board needs to be replaced because it has bad trace lines why keep testing.
On replacing board do you have to replace all parts to new board?
i was wondering if u could help me with my vizio 32in LCD i plug it in and there is no light at all on it took the back off and checked the power going in to it but im lost from there can u please help me..
I Have A TV My Neighbor Let
Me Have & Wen I Plug It In
I Get A Standby Light But No
Picture Or Sound. So Could It Be A
Logic Board Or TCON Board
Or An Inverter Board?
I have a lg42le5400uc. My baby sprayed it with water and one of the ead's went bad (tjick grey line on screen). I replace both sides but was rushing and switched by mistake witch caused one to burn. I just replaced both again but now I have no picture at all. It turns on but no LG ico, etc. Should I replace the driver boards or the tcon board first? Thanks in advance if you can assist.
my guess is tcon board cause if water dripped in tv edges it maybe shorted.
Can you please explain what you mean by reverencing parts and how? Thanks
I had unplugged the T CON and it still turn off on itself. Power board visually has no bad capacitors. So is there a way to check the main logic board to confirm it causes the problem?
We had lightning, it turned off our Insignia TV Ns-32L120A13, The cable box works, the TV won't turn on. I tried different power outlets. Looking at your video it seems like a power supply problem. I took the back off. I did not see any burnt parts. Is there a reset button or fuse on this unit? thanks, Bob
Bobby Rio leave power cord unplug for 5 minutes to reset and test tv, next check fuse on power board near power-cord. check bridge rectifier too.
hope this helps
I have a LG model PDP60R30110 plasma TV it starts off with a black screen then goes white to red but it looks like the screen is melting. Do you know what could be wrong with this TV a word to start the troubleshooting?
Hi i have a luxor tv and it is just totally unresponsive . It turns on fine but when its on says no signal retune etc . If i use any button on the tv remote it does nothing at all . If i press source on the tv it just comes up with a menu only comtaining the option ( tv ) no hdmi 1 hdmi 2 etc etc . Cant do anything on the tv at all so obv somethin weird going on . The tv is preyty new too in great shape . Can i get into the service menu ? Is it worth it too ? Or is this a bad board ?? Main power board av board ?? What would i replace . Thanks for any help guys the model no is ... luxor 46ccflt2
Hi i have a vizio model M3D650SV the tv will turn on and stay on for anywere from ten minutes to twenty five minutes picture and sound work fine after it shuts off on its own you wait 10 seconds hit the power button and the tv will come back on and play for another 10 to 25 min wait 10 seconds and you can turn back on again and you can go all day doing this power supply in is ok tested that even moved to another power outlet i opened the back of tv nothing looks bad no bunt smell no burn marks what shoud i look for next
Hi Tampatec IM A FIRST TIMER WE PLUGGED THE TV UP AND TRIED TO WATCH NETFLIXZ AND SEE IF WE COULD USE USB CORD OR BLUETOOTH TO WATCH FROM A IPHONE 7.THIS TV WAS FOUND AND GIVEN TO US. TWO FEMALES WHO KNOW NOTHING ABOUT T.V'S LLS I KNOW. BUT MY QUESTION IS THE TV WILL TURN ON BUT NO SOUND OR PICTURE POPS UP AND NO OPTIONS COME UP EITHER...
WHAT COULD WE DO TO FIX THIS TV ITS A VIZIO VP422 HDTV10A
MODEL S42 AX-YD05?
please i want know if its advisable to leave my TV or radio on when its rainy and there is thunder and lightening.
I'm sure with all the content you make fluke would be more than glad to bring back the fluke 12 rebranded with your name.
good day Tampatec, Im new to this field...i have a CRT TV which is not working, i know that there is a power coming in....but the momenet you switch it on, it stays in a standby mode (RED LED)..it doesnt show anything ..just black screen! just want to ask where to start checking the board and what is the possible problem of this TV...thanks more power
unplug powercord on tv then Carefully discharge flyback suction cup, i fixed quite of few crt Tvs check Fuses then check diodes and any transistors on metal heatsinks, legs should read .3 to .7 one way & OL reversed in diode mode on meter. check for 5 dc logic volts on main chip. Good luck! 8^)
good stuff ,!
Hi Tampatec, I wanted to ask about a samsung plasma tv that turns on...screen flashes on for about 2 seconds and then goes blank. sorry if this is the wrong place to ask
Hi I have a Samsung Surround DVD player Model HT-H5500K, Model code HT-H5500K/XA. This is the only appliance that I Earthed until one day a Lighting Storm struck, at the time the TV and DSTV decoder were also on but nothing happened to them. When the lighting struck hit us it tripped the earth leakage and that's the last time my surround system worked. After inspecting it inside I cannot see any burned damage or smell anything that has burned, yet a company that I took it to for repairs tells me it is unrepairable and I don't believe them. Can you advise?
I am using toshiba regza 42wl66e model, n have difficulty with searching for channels, I have change the aerial connector cable to connect to my tv but when I search for channels I can only find a couple. When I use the same cable n connect to another tv, I did not have any problem searching for channels. The setting use to search for channels both in auto and manually are the same for both tv, but my 42wl66e tv model are having problem finding channels. Please help.. how I explain well enough for u to understand. Thanks
some tv tuners are better than others, use amplifier but sometimes loose connections on connectors can cause weak signal and bad solder connections on tv turner board can weaken signal, (make sure you use rg6 cable)
whent u fix and older tv u need to discharg some electricity remaining by the back side of the screen ,. My question is do u need to do the same whent u fix and flat screen . I m a beginner and i want to know that help me pls
yes its recommended to discharge the big Caps but i don't and never been shock to a point where it hurt me. just don't touch metal.
hello ,I have a Magnavox 2010 year model #32MD350B/F7 ,if i plug it up the tv powers on says didgital tv then starts changing colors,none of my buttons work.either.Any help? thanks
Quick question... If a capacitor it suppose to measure 47 uF and my meter measures like almost 2,000 uF from that capacitor instead 47 uF does that mean that the capacitor is bad as well?
Reason for my question is because it already happened to me when I was measuring my ps3 power supply board and all the capacitors measured pretty closed according to each range in each one of them but except the only one that I'm mentioning above.
I'll wait for your response
Thanks in advance
Regards
take cap out of circuit and read it, check meter settings and put in fresh batteries in meter too then check it again, but when in doubt change it out. ps3 usually main board goes out first.
Thank you so much for your information.
Tampatech, I'm completely lost when it comes to troubleshooting my Sony Bravia TV. .8 red blinking flashes. Turns on and shuts right off..
me to but i never to get an answer
I have a Toshiba 40rv52u it comes on but it seems to be suck in minu mode can't get it off the screen is used the remote it doesn't work it turns the tv off and on but the enter button don't work
My name is Kim, I have a Sony Triniton XBR 42 inch massive tv. the problem I am having is the focus is blurry. I tried to adjust it in the menu but doesn't help, what do you think could be the problem?
Kim Richards in the back of tv there's adjustment dial for flyback transformer focus and crt screen B+ voltage be-careful not to dial b+ cause picture get either darker or brighter with lines, i think focus dial is labeled on transformer. Sub if this helps 8^)
My name is ART.
I have a Sylvania 6727 FDE CRT TV. I hope you can assist me with this bit of a dinosaur. When I attempt to turn on the set it clicks once and does not come on. This is a TV that we would love to keep going as it also has a DVD player and VHS player. I was given this TV when I acquired a property about a year ago. It has worked until recently but was very slow coming on and getting a Blurr-Free picture.. It has been used outdoors since its purchase. We were told it was an "outdoor unit"? It is mounted up high under a covered roof and it is not subject to direct water damage. When I do use my remote to turn on the TV I see a very quick little green lite then immediately it turns red then immediately shuts down. I do NOT have any manuals whatsoever but would like to obtain both the repair manual and the owners manual. Would you propose that my issue is a Power Issue? Could you also direct me to the manuals? Regards, ART
LG 46LD550-UB Has green shadow on left side of screen or picture about 15". This happened after I put a used main board from EBay. before put the main board in I had nothing. after I put main board TV played for a few minuets then the shadow came on.
Hi. I have a Samsung Plasma TV (PN60E550) that is giving sound but no picture. The problem has slowly gotten worse and worse. For a while after several attempts the picture would finally come on (and often while on and working the red light would blink), then it took a lot more attempts and now it just won't generate a picture at all. I watched some of your videos and opened up the TV. None of the capacitors appears to be buldging and there is no obvious damage or corrosion anywhere. So what is the next step? I don't want to remove all of the components and test every single thing .. how do we narrow the problem down to one component from this point? Any help is very much appreciated!
I just watched your samsung plasma tv video and I wanted to add that I tried unplugging the y board and checking to see if the tv screen would come one. It did not. So that means the issue is not the Y sus board right? I really don't know anything about this kind of stuff total noob so I don't want to dissassemble these boards to test / replace all the caps. my soldering skills leave a lot to be desired. Please let me know what you'd suggest from here. thanks
A comment if you can help me, my TV has horizontal lines running through it either sideways or up and down with different colors what does that mean
I have a Sony Bravia Midel Number KDS553000, Serial Number 8014995. The problem that I'm having is that I have a picture, but it is dim during daylight where I can barely see the images. At night the images are more visible, but there seems to be more of a bluish color. Any help in diagnosong the problem will be appreciated. I had just recently changed the lamp.
I have a 32 inch Sharp Model# LC-32SB23U,it comes on pitcher and sound after 30 Sec pitcher goes out sound stays on.I resett it and still does the same thing.
Where do i find the blinking code in fo need a little help
We have an Insignia 42" LCD TV. Model NS-L42Q-10A. We are having trouble with the picture being too light. We have adjusted the picture to try to correct it with no success. Please help.
My screen looks like it has smashed on the inside,by grabbing the t.v & moving it it has damaged the picture with lines and spots on inside screen where grabbed...Can this be fixed and cost?
Hi, I have a Toshiba LCD TV model no.40CV700E. My tv is turn on but there's no picture or sound. there is no backlight too. Can you help me to trouble shoot whats wrong with it. Hope you can help. Thank You.
Need to check volts on power board, go to tampatec.blogspot.com I created a list of common tv repairs and service guide.
6:26 made me laugh
Thank you
I have a Samsung LE40R88BD with the black screen and clicking fault. I have replaced two caps on the power board that leaked the black fluid but the fault continues. What would you suggest I do next, bro?
P.S. Love the vids and have been subscribed for a good couple of years and have shown support by liking vids and recommending friends subscribe too. Keep it up, bro! =)
50" LCD TV went off when there was a power outage ( plugged in to a surge protector ) and now will not power back on. Can you troubleshoot this ? Thanks.
katyerra
BB1-0.22 FOLLOWED BY BLACK RECTANGLE ON SCREEN BLACK ON TOP AND BOTTOM OF SCREEN, A NUMBER 2 IN EACH FOUR CORNERS OF SCREEN
Thanks alot
I purchased an E-tec 40 in. tv 14 months ago and the sound is there, I can change stations, but there is no picture (screen is black). What is the problem. Can I repair it myself?
did i blow a Capacitor, if i replace lamp and picture does not come back on ?...have blinking lights on front of my samsung projection tv..says stand by/temp...
A hammer Olivia television horizontal lines running up and down and sideways what does that mean
Hi I have a mitsubishi wd73640 we have changed everything light, boards and when we power it on it just blinks yellow which says that the door is open .can you help?
LCD monitor is switching on but no picture is appearing.the remote is unable to switch off the monitor. It is able to auto tune but no picture appears. What is the problem? Maybe the popping sounds before TV got into repair mode has some capacitor problem! What is to be done?
My Alba 21" L.C.D.Combi shows standby light but it will not switch on, I changed the remote but still no joy, what could be wrong.