I love mine, I put it together the way it was supposed to be with the control valves protected by the handle. Also I used the protective steel spring over the tubing that came with it, mine even came with the smallest roll of teflon tape I've ever seen.
i know this is a bit of an old video but ive been watching your shorts for a while and am a industrial tech myself. love your videos and congrats on the newborn my man :)
I have one without the handle, made a fitting with the Schrader valve to put in my enclosed trailer and use a portable air compressor. I had a friend get a flat tire on his enclosed trailer and worked awesome.
Jack stands. Hey I remember blister bags back in the '80s. Also we had blistered bags that we're used to recover vehicles at left the roadways. Read during that time of life I work for Uncle Sam and he had a big-budget can buy these things.
Just before you said you were not liking something, I already noticed it a second prior? The pinch point of the hose, from moving the indexing handle? Surgical rubber hose, was partially engineered, so it won't get crushed, if it was a hard plastic hose?
Great video Brother! Mine didn’t come with a spring and the lower handle assembly has the same cutout as the top handle. Assuming they improved the design to reduce hose pinching issues. I don’t know why they included instructions; They don’t even meet IKEA’s standards 😂
I wonder how well it does to lift half way under one of your tires on the trailer with the bike loaded? To get a jack underneath so you can swap a tire. I'd love to see how well it works on a power tank for offroad applications
My 4 Ton Craftsman jack weighs like 132lbs.? Almost as much as me? Not a fan of the 1 1/4 Ton aluminum floor jacks, had one fail before? Only issue with the air jack, is how tall it is retracted?
Is the dump valve a sintered bronze unit, or just a plastic cap covering the top? Sad, when you have to make on the fly engineering upgrades to something, that can potentially lift that kind of weight? LOL.
Great video, thank you. Going to go buy one.
Glad it was helpful!
10:50 why not flip the bracket around so the cutout notch is where the bracket is pinching the hose?
“Vevor”… definitely a man’s church.
Spring is for bottom of handle for hose so that hose does not kink around long bolt.
I love mine, I put it together the way it was supposed to be with the control valves protected by the handle. Also I used the protective steel spring over the tubing that came with it, mine even came with the smallest roll of teflon tape I've ever seen.
Could always weld some supports and hinges to expand the base to give it more stability
i know this is a bit of an old video but ive been watching your shorts for a while and am a industrial tech myself. love your videos and congrats on the newborn my man :)
Thank you so much! Not so new born anymore. He’s 1 now. Time sure moves
Thank you
Nice chucks
Lol. Thanks!! I refuse to grow up all the way
@@dansproshop I think my age tricks people into thinking I'm an adult.
Literally a jack of all trades! 😂
I wonder if that spring was to prevent the hose from kinking on the bolt at the bottom?
I have no idea, but honestly I like this way better anyway...thanks for the comment!
I think the spring is for the release valve. So it can't be accidentally knocked open
The spring is used at bottom of handle, the hose is snaked through spring thus preventing hose from kinking and chaffing the hose.@Megalixer84
The spring was probably for the bent section of tubing to help prevent it from kinking
I have one without the handle, made a fitting with the Schrader valve to put in my enclosed trailer and use a portable air compressor. I had a friend get a flat tire on his enclosed trailer and worked awesome.
That is a great idea.
Nice video man
Thanks!!
Jack stands. Hey I remember blister bags back in the '80s. Also we had blistered bags that we're used to recover vehicles at left the roadways. Read during that time of life I work for Uncle Sam and he had a big-budget can buy these things.
Just before you said you were not liking something, I already noticed it a second prior? The pinch point of the hose, from moving the indexing handle? Surgical rubber hose, was partially engineered, so it won't get crushed, if it was a hard plastic hose?
Great video Brother! Mine didn’t come with a spring and the lower handle assembly has the same cutout as the top handle. Assuming they improved the design to reduce hose pinching issues. I don’t know why they included instructions; They don’t even meet IKEA’s standards 😂
I wonder how well it does to lift half way under one of your tires on the trailer with the bike loaded? To get a jack underneath so you can swap a tire. I'd love to see how well it works on a power tank for offroad applications
Dan man i live in rocks too. I built skid plates for our floor jacks and plates for jack stands
Could this theory be adapted to use a car’s or truck’s exhaust instead of compressed air?
Those exist. Check out this link!! amzn.to/3oKvrnh
Like ur idea
Vevor: The Outlet Store for Chinese Prison Camps!
i wouldnt even trust a regular jack. i think this pair with nice jack stands is gonna be perfect
Are you able to do an updated review of this product? I am wondering if you still use it.
I sure do! Not every day, but I do use it. No problems to report yet!
Spring on tube
My 4 Ton Craftsman jack weighs like 132lbs.? Almost as much as me? Not a fan of the 1 1/4 Ton aluminum floor jacks, had one fail before? Only issue with the air jack, is how tall it is retracted?
its about 5'' all the way retracted. Probably wouldn't be practical for most passenger cars. This is definitely a truck jack.
Remember that kids are little germ farms.
But, we all love them anyways
They, if your worried about the hose wearing on the hex bolt edges, just replace those 2 bolt assemblies, with 2 carriage bolt assemblies?
Spring goes over the air line that goes around that bolt you replaced. Just saying.
Is the dump valve a sintered bronze unit, or just a plastic cap covering the top? Sad, when you have to make on the fly engineering upgrades to something, that can potentially lift that kind of weight? LOL.
its has a brass pneumatic muffler
19:56 You're a Proctologist, I'm a Gynecologist! 😆
Speed and simplicity. What are you talking about?
Um… it’s fast and simple
I guess, you have never looked at the assembly instructions !! LOL
Operation instructions are different !
CO2 next to a baby😂 give me a heater with an exhaust vent
The spring went over bolt you replaced
Haha. Who knew??!!
@@dansproshop on the hose stop kink😀❤️ur videos