Ford Ranger - Reversing Reverse Camera Kit - Sync2 & Sync3 - Retrofit

This is our Reversing Camera kit for the Ford Ranger with factory fitted Sync2 or Sync3 system ( We do not supply a new screen or offer Sync updates ) This Plug and Play kit comes with a T harness loom that plugs into the Sync unit fitted behind the screen connected to 10 meters of camera cable. Our low voltage NTSC camera will replace the Ford badge on the tailgate for a factory fitted look. Simply plug the programmer into the cars OBD port under the drivers side of the dashboard and it will code the Sync unit to activate the camera. The camera menu settings screen gives the option of having the camera on in reverse gear or a delay option - which will keep the camera image on the display until the car reaches 10 mph. The kit will not provide moving guidelines but if you cut the green wire loop at the camera it will show fixed gridlines as shown in ( Pic 2 ) If you have factory parking sensors installed they will show on the top right corner of the screen. Once you have used the programmer it is of no use and you are welcome to return it to us via tracked courier or Royal Mail. Once we receive it, we will credit you £40 back to your Payment account. The kit comes supplied with a USB key full of installation photos and fitting information. If you need any technical advice please contact us.
Buy Direct From Us: www.in-car-install.co.uk/shop...
Why Buy From Us - As our name states we operate through hands on 'Experience over Theory' We have over 20 years of Experience in fitting a vast range of In Car Technology Solutions and Retrofitted Upgrades. This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us.