A problem with a lot of people that are claimed to have gone to class don't realize some things: Their classes are theoretical (there's a reason we do labs in univerisity) and that airsoft is very loose when it comes to tolerances and specs (just look at MAXX and their hop up with such tight tolerances). Plus your battery video checks out, you basically experimented and found a correlation between the battery voltages and thermal efficiency, where 11.1v is the least thermal efficient.
Absolutely top content, you really got me out of a frustrating situation with your midcap syndrome 'nozzle trick' in one of your previous videos. Will continue to shout your stuff from the rooftops, mate.
Everything puts 50p in the arsehole!! 😂😂😂 that is actually one of the funniest ways I’ve ever heard someone explain when things piss them off. Brilliant
came to watch you tech, stay to listen to you rant about Gordon Ramsey for 10 minutes. 10/10 would watch again. Thanks for putting my Pistol back together :D
My local airsoft field has one single tech. And he has been doing airsoft tech work for at least 10 years, I have never once had a problem with him. He's the goat
Luke, my man... You have taught s much - both in tech work and proper British swearing. But always remember this and grin - if you have haters, you are on the right track.
Hi mate, i have a problem. following your advice I bought the hop up g&g camera but it doesn't fit in my asg. does not draw the bbs especially when the magazine is full (I use pts epm magazines). the asg is a mk18 vfc mod1 with prometheus bc bright inner barrel. I tried with different rubbers and nub (maple leaf omega nub + super macaron 70…. classic rubber + classic nub). The nozzle is polymer. my doubt is that the g&g hop up chamber comes without an external spring. can this be it? A thousand thanks.
I've only ever cut two springs in my 7 years of airsoft because there is almost NEVER a need to. When l have I've done just that, cut it like not eve two coils I've never heated it because that'd fuck the spring. I only cut them when one spring isn't giving the power l want and the next spring up is too powerful, which surprisingly is almost never an issue. Also cut end is supposed to go into the piston otherwise it starts making angry crunchy noises and power is all over the place. Any Negative Airsoft will probably tell me to now go wank a puffin or something, a compliment coming from him imo, but l still ain't gonna act like l know more than he does because he has definitely been doing this longer than l have.
There's no reason for a person to NOT cut a spring in their own gun or even for a site tech to do a snip to get somebody in the game, but when a pro shop does it & the AEG is this quick of a spring change, that's where it's a joke.
Please tell me there was a long cut when you took the 2 teeth off the piston rack. So many techs make it out as if doing it "will take bloody ages to get right", and you literally took 5 seconds and did it better than 99% i've seen.
@@NegativeAirsoftTechwhat?! a proffesional making a rig to make a "difficult" part of the job piss easy so he can better service customers? Thats insane!!
Wait why did you change the nozzle? You were about to explain why it’s a bad idea and then got side tracked. I really wanted to know 😂 since I put a 21.5 on my cyma plat.
That made my day it's good to have a rant. 🙃 People do take what you say and have a melt down without taking into account there's an infinite amount of variables.
On that corner of the gearbox that was hacked away. I installed a perun with a clicker into the same type of cyma gearbox recently. The safety lever protudes into the gearbox and you cant close it properly. Nothing about 1min of dremel work with a propper dremel bit wont fix. But i like this version better fits in with the theme better 😂
Congrats on the weight loss. I'm reassured by this video. No matter what I've just done to my AK-74 replica --- it's nowhere near as bad as this. And that thing was bodged back together using random o-rings and rubber pads from the shed and sounds like a bag of nails. The difference, of course, being that someone, somewhere paid good honest money for this original work while -- well - all that monstrosity cost me was time and the chance of a fire. I might've been dissapointed if I'd paid for it.
Hey ! Found your channel and subscribed directly ! Really nice video, damn what for internals in that Cyma, The Externals from these Platinums are amazing, i own every oldschool AR15 by them but here in germany they only sell them without Markings .... thats a pain in the Ass ? Body .... lots of money in it dude .... I had a Crappy Cyma M14 on my table ...whouldnt recommand the M14 Series to somebody now... the Shell is so thin that it breaks oOB at the front...
Sorbo pads can piss off. Some people are a special kind of bellend. Keep up the good work. I have fixed plenty of people's rifs that I just stare at in confusion and think WTF.
Can u do me a favor? Idk if its even possible, but i feel u can do it if it can be done...can u do a vid on a gearbox swap from a JG G3A3 platform to a LCT HK53A1 platform
Hey Gordon, just wanted to say thanks I've been watching a lot of your videos and I managed to do a job turning an aps uar into a half way decent job. You would probably love the dremel job I did to see my pinion-gear connection.
Hey do you glue your bearings/ bushing in ? I've always cleaned everything with isopropyl and then little dab of super glue to the sides of the bearing and then regrease everything accordingly now many people over grease they just gob it in there and make a mess.
Perfect brother, your channel is one of the few that I make a point of following, because you know what you say, and you know what you do, I have learned a lot from the little you show in the videos! You're fucked! ✌️😎🇧🇷❤️ Strong hug!
To answer the "why would you cut the gearbox for a titan" I've personally had to do the same on my Cyma Platinum, the reasoning why is because of how the safety lever is just up. if it is not modified the gearbox will put pressure on the titan and crack the lower corner.
🙋♂️ I just so happen to know everything. It's often difficult having to constantly share all this knowledge with the intellectually impaired masses. But that's my cross to bare.
I got 2 warhead at 2 different times and 2 different kinds. Got the black gen 1 and the copper lookin basic gen 1. Both got sent in for broken tabs and both got replaced with Sturdy actual tabs. Not that flimsy short wire bs
Love it! Some people are just shit at tech work. I can't stand stuff that's messy. Like Specna Orion cylinders with sharp edges that damage o rings.......Why. Why!
I used to make myself sick every maths lesson! Hated it but had to learn how to do books and engineering and other wizardry with numbers but it's still not maths to me. Well done for explaining stuff in a simple logical manner. I'm an airsoft tech god now 😂
I wonder if this tech work was done by a certain "airsoft gun smith" in a shop with the initials AAA 😂 the bloke has certainly got a rep for being the super glue gun smith 😂😂😂
I'd like to say to anyone claiming luke manufactured this work himself, you're talking shite. Its my gun, i got it brand new and 'upgraded ' 😂 by the same shop so this result is their work. Now ive seen the work they did for myself, i may pay them a visit.
@@sokolov26 It's better that the shop sees my videos, rectifies the situation & continues trading without all the fuckery, which is the best case scenario for everybody which is a good reason why I don't say.
@@sokolov26 unfortunately I don't want to name them on lukes platform as it could have ramifications for him and I've no platform of my own either. What I will say is, having purchased many guns from various suppliers, sometimes having upgrades done by so called in house techs, don't bother! They've all ended up being sub par for the costs or badly done and ended up on lukes desk, several causing him near breakdowns with videos to prove. My advice, buy gun, send to luke, have reliable working gun, happy airsofter.
@@georgedooley9297 I wish i could send my guns to Luke, at least one... But costumes and taxes will double the prize of the work (damn brexit...), and i can´t say to the costums "its a piece of art, not a toy gun" don´t drain my blood with taxs and months of waiting :(, so im here everyday trying to learn how to work on my own guns. Dude, at least you deserve a new gearbox, but dont let the shop fit it XD.
Luke can you help me please? My brand new CYMA cm041j mp5k shit its pants. Took it apart and the piston is fucked the top and bottom of the guid is wavey as the fucking ocian in the middle of the cunting north sea. The gearbox casing is realy sharp what can i do?
Yes i did and thank you for your reply i have a new piston and piston head everythings ready but how the hell do you keep the fucking anti reversal latch from moving while holding the main spring down for assembely. You make it look easy. Love your shit man you got me into airsoft and learned how to take shit apart.
@@NegativeAirsoftTech thanks Luke your the best. I love your vids its a shame you don't pist more on fb but i know why you don't. The runners on the casing was realy sharp so i filled them down got new piston and double o ring piston head running 7.4v lipo i'l let you know the outcome. Keep the vids coming mate i love them Thanks 🙂
Update info on my last comment. Ive started for me only ofc is take 1 tooth off at the front on my m4 as i noticed when i fire it i can see the piston stop early just for a split second but then free itself so i re opened it and found out as i did short stroke it but the pick up gear was hitting the first piston tooth and ince i removed it bam its free, it can move forward freely. Just something for you luke to think on and see if you have that problem before.
i know this isnt the right video to coment on this, but i see alot of conflicting views on aeg's and was wondering if you could sugest one for under £250? I thought it would be good coming from you because ive watched a few of your videos now and you seems brutally honest.
Man if I had some spare cash I’d love to have this guy work on my ICS L85, it shoots straight but loud and whiny as fuck. I’m not about to mess around with the gearbox in fear of fucking it up 😂
I cut the gearbox of a CYMA MP5/10 to fit a Titan. Everything but the safety switch works. Safety is electronically controlled. I hate it. Perun Hybrid v2 is it, and a clicker.
I'm one of the dickheads but I edit my comments to add more stuff to them or fix spelling mistakes since english isn't my first language. Usually add "edit:" when I add a bunch more text. Cyma gearbox needs to be grinded down on the inside where the safety lever sits tho it only needs to be done for Perun Clicker and Gate Titan (and from the inside). The way the guy that previously worked on it did it is a nasty shortcut, a crime. I love working on Cyma stuff. I also love recommending it to everyone. 2nd place is taken by E&C, love those too. Cyma even added a screw for adjusting the trigger travel to the gearbox, Cyma Noveske N4 has it and it's really easy to get Perun Clicker to be at the wall with stock trigger.
I really enjoy your videos, have learned a lot from them, of what to do and not to do, and it has improved my airsoft skills. I do somethings I have no idea why it works but what works... works. Can't quite tell if you do those little traps to catch the wankers on your coments but since you were smart enough to marry a portuguese girl I will let it slide.
If I would of done some shit like this my gears would of got hung up my mosfet would of be broke and my piston rack would be busted 🤣🤣 how do people pull this kind of shit off and actually get it to fire
Honestly you could have made the trolling about batteries even better if you threw in fucking AC electrical stuff because *ANGLES* in electricity makes everyone want to yeet off a five story building including myself. AC isn’t real, it was created by big electricity to sell DC
Do techs not realise expect for you luke that the cyma platinum piston teeth has it back end shaved down from factory by half and other companies are starting to do it too so taking teeth off if the paiton rack is pointless
@NegativeAirsoftTech aye the cyma silent piston rack they use have nock off half of the back pick up teeth to correct the angle so for that shs one is completely pointless as if the so called tech that did it before you would have notice it and won't change it.
@NegativeAirsoftTech Might have had a chance if you short stroked to 2 teeth and used a MS210 spring. Would have made for a nice vibrator. 👍 The 15.2v actually is working, T238 motor/mosfet (resoldered to 16AWG wire) semi only SR25 19tooth.
I do like that a few people have jumped in to stick the blade in me for this video, which is odd - why would you defend the work on display here? I've had one peanut who has accused me of manufacturing this bad work.... Yes, I block people who try that shit with me, I'm not here to pander to your feelings but it does make me wonder why you're defending such bad work.... Oh... I think I see.... nice.
Well, you see people still defending the two great dic(k)tatoships of Europe who started WWII. Eventhough they have all the facts about how shitty they were. People don't need logic, they just like opinions, mostly their own. “It’s Easier to Fool People Than It Is to Convince Them That They Have Been Fooled.” - Mark Twain Mostly people like to fool themselves, no matter the facts.
People can shout "I went to uni" or "I went to college" but for the IT world, everything changes every 3 years and your uni course will be horseshit when you leave lol
The more I see, the more I think you should need a license for a dremel.
When it comes to airsoft and firearms, it should be mandatory.
The Gordon Ramsay of airsoft 😂
A problem with a lot of people that are claimed to have gone to class don't realize some things: Their classes are theoretical (there's a reason we do labs in univerisity) and that airsoft is very loose when it comes to tolerances and specs (just look at MAXX and their hop up with such tight tolerances). Plus your battery video checks out, you basically experimented and found a correlation between the battery voltages and thermal efficiency, where 11.1v is the least thermal efficient.
Careful, don't go showing logic now!
@@NegativeAirsoftTech Right I forgot this is the internet 😂
@@BravoOneCharlie You forgot muh fairies in certain brands and mehgic and sick camo paintings which make guns shoot gooder.
"Nonce nuggets"! I'm still laughing at that.
"Nonce nuggets" 🤣 We called Werther's Original "paedo pellets" at my old job.
Ha!
Absolutely top content, you really got me out of a frustrating situation with your midcap syndrome 'nozzle trick' in one of your previous videos. Will continue to shout your stuff from the rooftops, mate.
Bum sausage
If you're pissing someone somewhere off, you're doing something right. Keep going.
This episode of " grown up british man yells at toy gun parts" is awesome
11.1v is too much for you, you dont need it. you just like big numbers
hehe big number go brrrrrr
@@normified haha gun go brrrrt-*crack-crack-crack
I wonder how it'd affect things if people started calling 11.1v users "Size Queens".
@@Tinblitz or voltage fans
Buddy, Your rant made may day, seriously. I just had a humongous doobie, no clue what this is about but this rant got the cake.
What do you think his reaction would be if I sent him a TM M4 putting out 5 joules and depleted uranium BBs ?
Put them in my bum
@@NegativeAirsoftTech big bumbum
@@NegativeAirsoftTechah, now the nonce nuggets make sense
Looks like the work of Sheffields local gun tech
Which one there are 3 that are shit and one that I trust.
Everything puts 50p in the arsehole!! 😂😂😂 that is actually one of the funniest ways I’ve ever heard someone explain when things piss them off. Brilliant
"Now I have to have a sweetie" 👏🏾 I have missed your videos good Sir
came to watch you tech, stay to listen to you rant about Gordon Ramsey for 10 minutes. 10/10 would watch again. Thanks for putting my Pistol back together :D
My local airsoft field has one single tech. And he has been doing airsoft tech work for at least 10 years, I have never once had a problem with him. He's the goat
I like how passionate you are about perfection, people ain’t honest nowa days or don’t really care.
"what's a missin screw after all aye?" some people act like no one's gonna open that puppy ever again
i'm new into airsoft teching, If I send my replica to this guy i'm a 100% sure that he will also find big problems xD
My guy is sitting here and f'n chewing Wherters. God, now I know where the teeth jokes come from.
7:00 did you chew that? Heracy
I was grumpy
Luke, my man... You have taught s much - both in tech work and proper British swearing.
But always remember this and grin - if you have haters, you are on the right track.
Looks like they left the work experience kid unsupervised with that one. I'm starting to wonder if there are any shops with competent techs left.
Dang I learned so much things from you, both from teching and swearing 👌
fuck i love your content and honest. its so true tho shits so relatable on so many scales
Gonna need to make a bingo game at this rate
Where can you boy one with OG - markings?
Hi mate, i have a problem. following your advice I bought the hop up g&g camera but it doesn't fit in my asg. does not draw the bbs especially when the magazine is full (I use pts epm magazines). the asg is a mk18 vfc mod1 with prometheus bc bright inner barrel. I tried with different rubbers and nub (maple leaf omega nub + super macaron 70…. classic rubber + classic nub). The nozzle is polymer. my doubt is that the g&g hop up chamber comes without an external spring. can this be it? A thousand thanks.
If u can swap a jg sg-1/g3 type gearbox to an lct LK53? Wired to stock preferably
I've only ever cut two springs in my 7 years of airsoft because there is almost NEVER a need to. When l have I've done just that, cut it like not eve two coils I've never heated it because that'd fuck the spring. I only cut them when one spring isn't giving the power l want and the next spring up is too powerful, which surprisingly is almost never an issue. Also cut end is supposed to go into the piston otherwise it starts making angry crunchy noises and power is all over the place. Any Negative Airsoft will probably tell me to now go wank a puffin or something, a compliment coming from him imo, but l still ain't gonna act like l know more than he does because he has definitely been doing this longer than l have.
There's no reason for a person to NOT cut a spring in their own gun or even for a site tech to do a snip to get somebody in the game, but when a pro shop does it & the AEG is this quick of a spring change, that's where it's a joke.
Please tell me there was a long cut when you took the 2 teeth off the piston rack. So many techs make it out as if doing it "will take bloody ages to get right", and you literally took 5 seconds and did it better than 99% i've seen.
I made a jig from an old vice, place the rack & use a full size grinder - takes maybe a minute.
@@NegativeAirsoftTechwhat?! a proffesional making a rig to make a "difficult" part of the job piss easy so he can better service customers? Thats insane!!
@@oshwaflz Professionals putting in a little extra work to save themselves hours in the future?? Doesn't sound legit to me.
@@Tinblitz just another reason to love negativeairsoft....
Wait why did you change the nozzle? You were about to explain why it’s a bad idea and then got side tracked.
I really wanted to know 😂 since I put a 21.5 on my cyma plat.
That made my day it's good to have a rant. 🙃
People do take what you say and have a melt down without taking into account there's an infinite amount of variables.
On that corner of the gearbox that was hacked away.
I installed a perun with a clicker into the same type of cyma gearbox recently. The safety lever protudes into the gearbox and you cant close it properly.
Nothing about 1min of dremel work with a propper dremel bit wont fix.
But i like this version better fits in with the theme better 😂
Cyma do trademarked m4 colt lowers??! Whaaaaa
Congrats on the weight loss.
I'm reassured by this video. No matter what I've just done to my AK-74 replica --- it's nowhere near as bad as this. And that thing was bodged back together using random o-rings and rubber pads from the shed and sounds like a bag of nails. The difference, of course, being that someone, somewhere paid good honest money for this original work while -- well - all that monstrosity cost me was time and the chance of a fire.
I might've been dissapointed if I'd paid for it.
Hey ! Found your channel and subscribed directly ! Really nice video, damn what for internals in that Cyma, The Externals from these Platinums are amazing, i own every oldschool AR15 by them but here in germany they only sell them without Markings .... thats a pain in the Ass ? Body .... lots of money in it dude .... I had a Crappy Cyma M14 on my table ...whouldnt recommand the M14 Series to somebody now... the Shell is so thin that it breaks oOB at the front...
Sorbo pads can piss off. Some people are a special kind of bellend. Keep up the good work. I have fixed plenty of people's rifs that I just stare at in confusion and think WTF.
Can u do me a favor? Idk if its even possible, but i feel u can do it if it can be done...can u do a vid on a gearbox swap from a JG G3A3 platform to a LCT HK53A1 platform
missed the video about the battery talk,
Almost spat out the werthers in my mouth when I saw you pull one out
This is the first video I've watched on this channel. Is he always like this? 😂
I'm a little angel
Tourettes
The cyma looks relatively new. What advantage would the owner have got from spending more money on upgrades prior to it been redone?
Hey Gordon, just wanted to say thanks I've been watching a lot of your videos and I managed to do a job turning an aps uar into a half way decent job. You would probably love the dremel job I did to see my pinion-gear connection.
Absolutely love how “geniuses” are getting roasted for their crap. 😂
Hey do you glue your bearings/ bushing in ? I've always cleaned everything with isopropyl and then little dab of super glue to the sides of the bearing and then regrease everything accordingly now many people over grease they just gob it in there and make a mess.
I don't.
If they need gluing then they can be glued in incorrectly so it's better to not.
@@NegativeAirsoftTech thanks buddy.
😂😂😂 You always keep in it real,
Perfect brother, your channel is one of the few that I make a point of following, because you know what you say, and you know what you do, I have learned a lot from the little you show in the videos! You're fucked! ✌️😎🇧🇷❤️ Strong hug!
Congrats on your diet and weight loss!
To answer the "why would you cut the gearbox for a titan" I've personally had to do the same on my Cyma Platinum, the reasoning why is because of how the safety lever is just up. if it is not modified the gearbox will put pressure on the titan and crack the lower corner.
You slightly bore it out, not hack the gearbox off with a bread knife
I had to personally remove the inside rim, but I definitely didn’t delete the corner.
🙋♂️ I just so happen to know everything. It's often difficult having to constantly share all this knowledge with the intellectually impaired masses. But that's my cross to bare.
I am an electronic engineer who designs components for a major British motorcycle manufacturer. You're absolutely correct. Crack on
Lovin‘ it… the inimitable Neg treatment including well justified rant! 👊🏻🍻🤘🏻
I got 2 warhead at 2 different times and 2 different kinds.
Got the black gen 1 and the copper lookin basic gen 1. Both got sent in for broken tabs and both got replaced with Sturdy actual tabs. Not that flimsy short wire bs
You do what most Hate,telling the truth.Stay as you are its Good,greetings from Germany
Love it! Some people are just shit at tech work. I can't stand stuff that's messy. Like Specna Orion cylinders with sharp edges that damage o rings.......Why. Why!
I used to make myself sick every maths lesson! Hated it but had to learn how to do books and engineering and other wizardry with numbers but it's still not maths to me. Well done for explaining stuff in a simple logical manner. I'm an airsoft tech god now 😂
I wonder if this tech work was done by a certain "airsoft gun smith" in a shop with the initials AAA 😂 the bloke has certainly got a rep for being the super glue gun smith 😂😂😂
Do I need to start sending you lettuce now? Maybe carrots.........
The Gordan Ramsey of airsoft, I love it.
Tourettes
When u doing the sten
What nozzle length did you use for this gun?
negativeairsoft.com/product/21-00mm-tapered-boi-nozzle/
@@NegativeAirsoftTechjust wondering but why 21.00 instead of something like the Cyma Platinum’s 21.3-4? Is it because of feeding issues?
@@m1a1abramstank49 ua-cam.com/video/MfyYRYn3f-o/v-deo.html
I hate spoonfeeding ;-)
Just love your videos
Luke big angry in this vid and with good reason. But you know, plus side, 2 and half stone lost? Nice one!
Id love to see your top 10 pet hates when it comes to airsoft gun repairs xD
Ptfe tape, sorbo pads, prommy am best etc
I'd like to say to anyone claiming luke manufactured this work himself, you're talking shite. Its my gun, i got it brand new and 'upgraded ' 😂 by the same shop so this result is their work.
Now ive seen the work they did for myself, i may pay them a visit.
what was the shop so i can avoid?
@@sokolov26 It's better that the shop sees my videos, rectifies the situation & continues trading without all the fuckery, which is the best case scenario for everybody which is a good reason why I don't say.
@@sokolov26 unfortunately I don't want to name them on lukes platform as it could have ramifications for him and I've no platform of my own either. What I will say is, having purchased many guns from various suppliers, sometimes having upgrades done by so called in house techs, don't bother! They've all ended up being sub par for the costs or badly done and ended up on lukes desk, several causing him near breakdowns with videos to prove. My advice, buy gun, send to luke, have reliable working gun, happy airsofter.
@@NegativeAirsoftTech i would agree
@@georgedooley9297 I wish i could send my guns to Luke, at least one... But costumes and taxes will double the prize of the work (damn brexit...), and i can´t say to the costums "its a piece of art, not a toy gun" don´t drain my blood with taxs and months of waiting :(, so im here everyday trying to learn how to work on my own guns.
Dude, at least you deserve a new gearbox, but dont let the shop fit it XD.
Luke can you help me please? My brand new CYMA cm041j mp5k shit its pants. Took it apart and the piston is fucked the top and bottom of the guid is wavey as the fucking ocian in the middle of the cunting north sea. The gearbox casing is realy sharp what can i do?
Did you post on a FB group yesterday?
If so, your piston was in "off the runners"
Yes i did and thank you for your reply i have a new piston and piston head everythings ready but how the hell do you keep the fucking anti reversal latch from moving while holding the main spring down for assembely. You make it look easy. Love your shit man you got me into airsoft and learned how to take shit apart.
@@comedyshane I have clips on my website 😉
@@NegativeAirsoftTech thanks Luke your the best. I love your vids its a shame you don't pist more on fb but i know why you don't. The runners on the casing was realy sharp so i filled them down got new piston and double o ring piston head running 7.4v lipo i'l let you know the outcome. Keep the vids coming mate i love them Thanks 🙂
Oh god i think i shimed it ok but the motor is now spinning and making a grinding noise. Taking it apart again
Where's the Sten?😠
Doing it now
Fuckin love this guy
xx
Sooo has anyone figured out wtf the big chonk out of the gearbox shell is about?
Didn't want to grind the safety so cut gearbox instead...
Completely mental...
@@NegativeAirsoftTech Madness. It's like lobbing off your head because you've a toothache. I feel bad for owners who pay for this shite.
Update info on my last comment.
Ive started for me only ofc is take 1 tooth off at the front on my m4 as i noticed when i fire it i can see the piston stop early just for a split second but then free itself so i re opened it and found out as i did short stroke it but the pick up gear was hitting the first piston tooth and ince i removed it bam its free, it can move forward freely.
Just something for you luke to think on and see if you have that problem before.
i know this isnt the right video to coment on this, but i see alot of conflicting views on aeg's and was wondering if you could sugest one for under £250? I thought it would be good coming from you because ive watched a few of your videos now and you seems brutally honest.
Cyma ak that's a vfc clone
C Marriott
Man if I had some spare cash I’d love to have this guy work on my ICS L85, it shoots straight but loud and whiny as fuck. I’m not about to mess around with the gearbox in fear of fucking it up 😂
this is beautiful
Love your content
please tell me how to make an electric blowback?
I scared this is xm177e2 vfc
I wish you reviewed everything!
9:25 i am perfectly sure you are gordon ramsay of airsoft
I get that a lot.... but I'm handsome, so....
So bad it required a candy
I cut the gearbox of a CYMA MP5/10 to fit a Titan. Everything but the safety switch works. Safety is electronically controlled. I hate it. Perun Hybrid v2 is it, and a clicker.
I'm one of the dickheads but I edit my comments to add more stuff to them or fix spelling mistakes since english isn't my first language.
Usually add "edit:" when I add a bunch more text.
Cyma gearbox needs to be grinded down on the inside where the safety lever sits tho it only needs to be done for Perun Clicker and Gate Titan (and from the inside).
The way the guy that previously worked on it did it is a nasty shortcut, a crime.
I love working on Cyma stuff. I also love recommending it to everyone. 2nd place is taken by E&C, love those too.
Cyma even added a screw for adjusting the trigger travel to the gearbox, Cyma Noveske N4 has it and it's really easy to get Perun Clicker to be at the wall with stock trigger.
You also don't do anywhere NEAR enough booger sugar to be the Gordon Ramsey of Airsoft.
I really enjoy your videos, have learned a lot from them, of what to do and not to do, and it has improved my airsoft skills. I do somethings I have no idea why it works but what works... works. Can't quite tell if you do those little traps to catch the wankers on your coments but since you were smart enough to marry a portuguese girl I will let it slide.
50p reference lmao
Every neckbeard on reddit/discord carrying on like they know what they are talking about will whip out a build like this.
Honestly as long as my gun doesn't smell of burning plastic and hits a man size target at 60m I'm happy
nonce nuggets haha
If I would of done some shit like this my gears would of got hung up my mosfet would of be broke and my piston rack would be busted 🤣🤣 how do people pull this kind of shit off and actually get it to fire
Honestly you could have made the trolling about batteries even better if you threw in fucking AC electrical stuff because *ANGLES* in electricity makes everyone want to yeet off a five story building including myself.
AC isn’t real, it was created by big electricity to sell DC
Do techs not realise expect for you luke that the cyma platinum piston teeth has it back end shaved down from factory by half and other companies are starting to do it too so taking teeth off if the paiton rack is pointless
Platinums come with 13:1 13 tooth (what i think are) rocket gears which are the same as the SHS they swapped out to...
@NegativeAirsoftTech aye the cyma silent piston rack they use have nock off half of the back pick up teeth to correct the angle so for that shs one is completely pointless as if the so called tech that did it before you would have notice it and won't change it.
>straight to the point
>Werther's
Based and Original pilled. Which is why you're one of the only few Bongs I have respect for.
rant over yet?
For now... until my wife turns the TV back on & I find something else to cry about
Me: Shoves 15.2v :/
I did an ak on 22.2v 5000mah once.
100 odd rounds per second on a standard Cyma gearbox...
For just under one mag before it died a heros death.
@NegativeAirsoftTech
Might have had a chance if you short stroked to 2 teeth and used a MS210 spring. Would have made for a nice vibrator. 👍
The 15.2v actually is working, T238 motor/mosfet (resoldered to 16AWG wire) semi only SR25 19tooth.
@NegativeAirsoftTech
Have to go back to 14.8v since the min volt warning on the mosfet is 3.4v and LiHv cannot be hitting
Why so negative?
That is sad and terrible😑
I don't care about the teching mate...YOU ARE CHEWING ON A WERTHERS ORIGINAL....WTF !!....INSANITY
I do like that a few people have jumped in to stick the blade in me for this video, which is odd - why would you defend the work on display here? I've had one peanut who has accused me of manufacturing this bad work.... Yes, I block people who try that shit with me, I'm not here to pander to your feelings but it does make me wonder why you're defending such bad work....
Oh... I think I see.... nice.
Well, you see people still defending the two great dic(k)tatoships of Europe who started WWII. Eventhough they have all the facts about how shitty they were. People don't need logic, they just like opinions, mostly their own.
“It’s Easier to Fool People Than It Is to Convince Them That They Have Been Fooled.” - Mark Twain
Mostly people like to fool themselves, no matter the facts.
I don't see anyone defending the ass work in the comments
@@iota515 some comments were deleted, some I killed.
@@NegativeAirsoftTech You do what you want, but, if someone is defending this shit he is also writing on his own face "i´m a cunt"
@@iota515 Asswork? They must be proctologists
People can shout "I went to uni" or "I went to college" but for the IT world, everything changes every 3 years and your uni course will be horseshit when you leave lol
AoE is load of rubbish